Preclinical Target Validation Using Patient-derived Cells.

The Structural Genomics Consortium (SGC) and its clinical, industry and disease-foundation partners are launching open-source preclinical translational medicine studies.

An assessment of population structure in eight breeds of cattle using a whole genome SNP panel

Background: Analyses of population structure and breed diversity have provided insight into the origin and evolution of cattle. Previously, these studies have used a low density of microsatellite markers, however, with the large number of single nucleotide polymorphism markers that are now available, it is possible to perform genome wide population genetic analyses in cattle. In this study, we used a high-density panel of SNP markers to examine population structure and diversity among eight cattle breeds sampled from Bos indicus and Bos taurus. Results: Two thousand six hundred and forty one single nucleotide polymorphisms ( SNPs) spanning all of the bovine autosomal genome were genotyped in Angus, Brahman, Charolais, Dutch Black and White Dairy, Holstein, Japanese Black, Limousin and Nelore cattle. Population structure was examined using the linkage model in the program STRUCTURE and Fst estimates were used to construct a neighbor-joining tree to represent the phylogenetic relationship among these breeds. Conclusion: The whole-genome SNP panel identified several levels of population substructure in the set of examined cattle breeds. The greatest level of genetic differentiation was detected between the Bos taurus and Bos indicus breeds. When the Bos indicus breeds were excluded from the analysis, genetic differences among beef versus dairy and European versus Asian breeds were detected among the Bos taurus breeds. Exploration of the number of SNP loci required to differentiate between breeds showed that for 100 SNP loci, individuals could only be correctly clustered into breeds 50% of the time, thus a large number of SNP markers are required to replace the 30 microsatellite markers that are currently commonly used in genetic diversity studies.

Genome-wide SNP genotyping highlights the role of natural selection in Plasmodium falciparum population divergence

Background: The malaria parasite Plasmodium falciparum exhibits abundant genetic diversity, and this diversity is key to its success as a pathogen. Previous efforts to study genetic diversity in P. falciparum have begun to elucidate the demographic history of the species, as well as patterns of population structure and patterns of linkage disequilibrium within its genome. Such studies will be greatly enhanced by new genomic tools and recent large-scale efforts to map genomic variation. To that end, we have developed a high throughput single nucleotide polymorphism (SNP) genotyping platform for P. falciparum. Results: Using an Affymetrix 3,000 SNP assay array, we found roughly half the assays (1,638) yielded high quality, 100% accurate genotyping calls for both major and minor SNP alleles. Genotype data from 76 global isolates confirm significant genetic differentiation among continental populations and varying levels of SNP diversity and linkage disequilibrium according to geographic location and local epidemiological factors. We further discovered that nonsynonymous and silent (synonymous or noncoding) SNPs differ with respect to within-population diversity, interpopulation differentiation, and the degree to which allele frequencies are correlated between populations. Conclusions: The distinct population profile of nonsynonymous variants indicates that natural selection has a significant influence on genomic diversity in P. falciparum, and that many of these changes may reflect functional variants deserving of follow-up study. Our analysis demonstrates the potential for new high-throughput genotyping technologies to enhance studies of population structure, natural selection, and ultimately enable genome-wide association studies in P. falciparum to find genes underlying key phenotypic traits.

Slavnov-Taylor identities for the 2+1 dimensional noncommutative CPN-1 model

In the context of the 1/N expansion, the validity of the Slavnov-Taylor identity relating three- and two-point functions for the 2 + 1-dimensional noncommutative CP(N-1) model is investigated, up to subleading 1/N order, in the Landau gauge.

Slavnov-Taylor identities for noncommutative QED(4)

In this work we present an analysis of the one-loop Slavnov-Taylor identities in noncommutative QED(4). The vectorial fermion-photon and the triple photon vertex functions were studied, with the conclusion that no anomalies arise.

Bias-corrected Pearson estimating functions for Taylor`s power law applied to benthic macrofauna data

Estimation of Taylor`s power law for species abundance data may be performed by linear regression of the log empirical variances on the log means, but this method suffers from a problem of bias for sparse data. We show that the bias may be reduced by using a bias-corrected Pearson estimating function. Furthermore, we investigate a more general regression model allowing for site-specific covariates. This method may be efficiently implemented using a Newton scoring algorithm, with standard errors calculated from the inverse Godambe information matrix. The method is applied to a set of biomass data for benthic macrofauna from two Danish estuaries. (C) 2011 Elsevier B.V. All rights reserved.

Flow and axial dispersion simulation for traveling axisymmetric Taylor vortices

Numerical experiments using a finite difference method were carried out to determine the motion of axisymmetric Taylor vortices for narrow-gap Taylor vortex flow. When a pressure gradient is imposed on the flow the vortices are observed to move with an axial speed of 1.16 +/- 0.005 times the mean axial flow velocity. The method of Brenner was used to calculate the long-time axial spread of material in the flow. For flows where there is no pressure gradient, the axial dispersion scales with the square root of the molecular diffusion, in agreement with the results of Rosen-bluth et al. for high Peclet number dispersion in spatially periodic flows with a roll structure. When a pressure gradient is imposed the dispersion increases by an amount approximately equal to 6.5 x 10(-4) (W) over bar(2)d(2)/D-m, where (W) over bar is the average axial velocity in the annulus, analogous to Taylor dispersion for laminar flow in an empty tube.

A case-control study of employment status and mortality in a cohort of Australian youth

Recent studies have demonstrated a link in young populations between unemployment and ill health. The purpose of this study is to correlate mortality with employment status in two cohorts of young Australian males, aged 17-25 years, from 1984 to 1988. Two youth cohorts consisting of an initially unemployed sample (n = 1424 males) and a population sample (n = 4573 males), were surveyed annually throughout the study period. Those lost to follow-up during the survey period were matched with death registries across Australia. Employment status was determined from weekly diaries and death certificates and was designated as: employed or student; unemployed; not in the work force (excluding students). Conditional logistic regression, using age- and cohort- matched cases (deaths) and controls (alive), was used to estimate the odds ratio (OR) of dying with regard to employment status, taking into account potential confounders such as ethnicity, aboriginality, educational attainment, pre-existing health problems, socio-economic status of parents, and other factors. Twenty three male survey respondents were positively matched to death registry records. Compared to those employed or students (referent group), significantly elevated ORs were found to be associated with neither being in the workforce nor a student for all cause, external cause, and external cause mortality other than suicide. Odds ratios were adjusted for age, survey cohort, ethnicity, pre-existing physical and mental health status, education level, and socio-economic status of parent(s). A statistically significant increasing linear trend in odds ratios of male mortality for most cause groups was found across the employment categories, from those employed or student (lowest ORs), through those unemployed; to those not in the workforce (highest ORs). Suicide was higher, but not statistically significantly, in those unemployed or not in the workforce. Suicide also was associated, though not significantly, with the respondent not living with their parents when they were 14 years of age. No association was found between mortality and past unemployment experience, as measured by length of time spent unemployed, or the number of spells of unemployment experienced during the survey. The results of this study underscore the elevated risk to survival in young males as a consequence of being neither employed nor a student. (C) 1999 Elsevier Science Ltd. All rights reserved.

Effects of a program of intervention on parental distress following infant death

A longitudinal study of 144 patents (65 fathers, 79 mothers) was conducted to evaluate the effectiveness of a program of intervention in relieving the psychological distress of parents affected by infant death. Participants were assessed in terms of their psychiatric disturbance, depression, anxiety, physical symptoms, dyadic adjustment, and coping strategies. The experimental group (n = 84) was offered an intervention program comprising the use of specially designed resources and contact with a trained grief worker. A control group (n = 60) was given routine community care. Parental reactions were assessed at four to six weeks postloss (prior to the implementation of the intervention program), at six months postloss, and at 15 months postloss. A series of multivariate analyses of valiance revealed that the intervention was effective in reducing the distress of parents, particularly those assessed prior to the intervention as being at high-risk of developing mourning difficulties. Effects of the intervention were noted in terms of parents' overall psychiatric disturbance, marital quality, and paternal coping strategies.

Influence of Mg content on the microstructure and solid solution chemistry of Al-7%Si-Mg casting alloys during solution treatment

The solution treatment stage of the T6 heat-treatment of Al-7%Si-Mg foundry alloys influences microstructural features such as Mg2Si dissolution, and eutectic silicon spheroidisation and coarsening. Microstructural and microanalytical studies have been conducted across a range of Sr-modified Al-7%Si alloys, with an Fe content of 0.12% and Mg contents ranging from 0.3-0.7wt%. Qualitative and quantitative metallography have shown that, in addition to the above changes, solution treatment also results in changes to the relative proportions of iron-containing intermetallic particles and that these changes are composition-dependent. While solution treatment causes a substantial transformation of pi phase to beta phase in low Mg alloys (0.3-0.4%), this change is not readily apparent at higher Mg levels (0.6-0.7%). The pi to beta transformation is accompanied by a release of Mg into the aluminum matrix over and above that which arises from the rapid dissolution of Mg2Si. Since the level of matrix Mg retained after quenching controls an alloy's subsequent precipitation hardening response, a proper understanding of this phase transformation is crucial if tensile properties are to be maximised.

Treatment implications of a positive sentinel lymph node biopsy for patients with early-stage breast carcinoma

BACKGROUND. Sentinel lymph node (SLN) mapping and biopsy is emerging as an alternative to axillary lymph node dissection (ALND) in determining the lymph node status of patients with early-stage breast carcinoma. The hypothesis of the technique is that the SLN is the first lymph node in the regional lymphatic basin that drains the primary tumor. Non-SLN (NSLN) metastasis in the axilla is unlikely if the axillary SLN shows no tumor involvement, and, thus, further axillary interference may be avoided. However, the optimal treatment of the axilla in which an SLN metastasis is found requires ongoing evaluation. The objectives of this study were to evaluate the predictors for NSLN metastasis in the presence of a tumor-involved axillary SLN and to examine the treatment implications for patients with early-stage breast carcinoma. METHODS. Between June 1998 and May 2000, 167 patients participated in the pilot study of SLN mapping and biopsy at Westmead Hospital. SLNs were identified successfully and biopsied in 140 axillae. All study patients also underwent ALND. The incidence of NSLN metastasis in the 51 patients with a SLN metastasis was correlated with clinical and pathologic characteristics. RESULTS. Of 51 patients with a positive SLN, 24 patients (47%) had NSLN metastases. The primary tumor size was the only significant predictor for NSLN involvement. NSLN metastasis occurred in 25% of patients (95% confidence interval [95%CI], 10-47%) with a primary tumor size less than or equal to 20 mm and in 67% of patients (95%CI, 46-83%) with a primary tumor size > 20 mm (P = 0.005). The size of the SLN metastasis was not associated significantly with NSLN involvement. Three of 7 patients (43%) with an SLN micrometastasis (< 1 mm) had NSLN involvement compared with 38 of 44 patients (48%) with an SLN macrometastasis (greater than or equal to 1 mm). CONCLUSIONS. The current study did not identify a subgroup of SLN positive patients in whom the incidence of NSLN involvement was low enough to warrant no further axillary interference. At present, a full axillary dissection should be performed in patients with a positive SLN. (C) 2001 American Cancer Society.

Semisolid casting of AlSi7Mg0.35 alloy produced by low-temperature pouring

AlSi7Mg0.35 alloy was cast into permanent moulds using different pouring temperatures (725 to 625degreesC). As the pouring temperature decreased, the as-cast microstructure changed from a coarse dendritic structure, through fine equiaxed grains to fine rosette-like grains. The as-cast materials were then partially remelted and isothermally held at 580degreesC prior to semisolid casting into a stepped die. The feedstock material cast from a high temperature filled only half the die, with severe segregation and other defects. The low-temperature-poured material completely filled the die with negligible porosity. The quality of semisolid castings is significantly affected by the microstructure of the semisolid feedstock material that arises from a combination of as-cast and subsequent thermal treatment conditions. The paper describes (a) the influence of pouring temperature on the microstructure of feedstock; (b) microstructure evolution through remelting and (c) the quality of semisolid castings produced with this material. For A17Si0.35Mg alloy, low temperature pouring in the range of 625-650degreesC followed by suitable isothermal holding treatment can result in good quality semisolid casting.