Modified broken rice starch as fat substitute in sausages

The demand for low-fat beef products has led the food industry to use fat substitutes such as modified starch. About 14% of broken rice is generated during processing. Nevertheless, this by-product contains high levels of starch; being therefore, great raw material for fat substitution. This study evaluated the applicability of chemically and physically modified broken rice starch as fat substitute in sausages. Extruded and phosphorylated broken rice was used in low-fat sausage formulation. All low-fat sausages presented about 55% reduction in the fat content and around 28% reduction in the total caloric value. Fat replacement with phosphorylated and extruded broken rice starch increased the texture acceptability of low-fat sausages, when compared to low-fat sausages with no modified broken rice. Results suggest that modified broken rice can be used as fat substitute in sausage formulations, yielding lower caloric value products with acceptable sensory characteristics.

Effects of heat treatment and storage temperature on the use of açaí drink by nutraceutical and beverage industries

This study assesses the storage temperature effect on the anthocyanins of pasteurized and unpasteurized açaí pulp. The data was obtained using a pasteurized and lyophilized pulp (PLP) to evaluate the temperature effect (0, 25, and 40 °C). Part of non-pasteurized frozen pulp (NPP) was pasteurized (NPP-P) at 90 °C for 30 seconds; both pulps were stored at 40 °C. The anthocyanin content reduction in the drink was evaluated from the half-life time (t1/2), activation energy (Ea), temperature quotient (Q10), and the reaction rate constant (k). The t1/2 of the PLP anthocyanins stored at 40 °C was 1.8 times less than that stored at 25 °C and 15 times less than that stored at 0 °C; therefore, the higher temperatures decreased the stability of anthocyanins. The pasteurization increased the t1/2 by 6.6 times (10.14 hours for NPP and 67.28 hours for NPP-P). The anthocyanin degradation on NPP-P followed a first order kinetic, while NPP followed a second order kinetic; thus it can be said that the pasteurization process can improve the preservation of anthocyanins in the pulp.

Microbiota of sausages obtained by spontaneous fermentation produced in the South of Brazil

The study of the ecology of fermented sausage is fundamental to understand the physical and chemical changes that happen during fermentation and maturation. The aim of the present study was to determine the microbiological characteristics of sausages produced by spontaneous fermentation. Fifty samples of sausages produced in the South of Brazil by different small manufacturers were analyzed for the following microbiota: aerobic mesophilic bacteria; Micrococcaceae; mold and yeast; lactic acid bacteria; total and fecal coliforms; coagulase-positive Staphylococcus, and Salmonella. In most samples (72%), the count of lactic bacteria was higher than 6 log10 cfu.g-1, and the samples with the highest counts were above 8 log10 cfu.g-1. The counts of Micrococcaceae in most samples were between 5 log10 and 7 log10 cfu.g-1. With respect to the presence of molds and yeasts, there was a significant variation among the samples with counts ranging from 2 log10 cfu.g-1 and 6 log10 cfu.g-1. From the data obtained, it was possible to conclude that 24% of the analyzed samples did not comply with the current law in Brazil since the levels of fecal coliforms or coagulase-positive Staphylococcus exceeded the maximum limit allowed.

Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP) plan in lobster processing industries

This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.

Nutritional value and fatty acid composition of some traditional Argentinean meat sausages

The aim of this study was to determine the nutritional composition (moisture, protein, carbohydrates, and total fat) of some meat products produced in the northeastern Argentina, analyzing fatty acids composition, polyunsaturated/saturated fatty acid ratio PUFA/SFA ratio (polyunsaturated/ saturated fatty acids), n-6/n-3 ratio, and CLA (conjugated linoleic acid) content. Thirty traditional meat products produced by different processes were used. The samples were classified into 4 different categories as follows: salamín (dry cured and fermented sausage), chorizos (raw sausage), chorizo ahumado (cooked and smoked sausage), and morcilla (cooked sausage). From the results obtained it can be said that the total carbohydrate contents of the salamín studied were slightly lower; fat content of raw chorizo was significantly lower, and protein content of chorizo ahumado was significantly higher than those comparison from databases from other regions of Argentina, USA, and Spain. Except for chorizo, which has a value lower than 0.4, the PUFA/SFA-stearic ratio of the other products were a little higher than those reported by other researchers. CLA (Conjugated linoleic acid) contents between 0.03% and 0.19% were detected. The results obtained indicate that salamín produced in northeastern Argentina, Chaco state, shows high protein and PUFA (Polyunsaturated fatty acids) contents, and low atherogenic and thrombogenic indexes, which makes it a more healthful product than those of similar composition produced in other countries.

Replacement of mechanically deboned chicken meat with its protein hydrolysate in mortadella-type sausages

Mortadella-type sausage manufactured using mechanically deboned chicken meat were reformulated replacing MDCM with increasing amounts of MDCM protein hydrolysates (10%, 20%, and 30%), and their physicochemical, microbiological, and sensorial characteristics were evaluated for 60 days of storage at 4 °C. The higher substitutions resulted in sausages more susceptible to lipid oxidation with higher TBARS values during storage; however, these values were lower than the organoleptic perception threshold. The sausages were darker and less red, with lower lightness (L*) and redness (a*) values than those of the control treatment. They had soft texture, which was evidenced by both the instrumental and sensory analysis. Therefore, the formulation containing 10% of MDCM protein hydrolysates proved to be the most suitable for mortadella-type sausage elaboration.

Fat reduction in the formulation of frankfurter sausages using inulin and pectin

The aim of this study was to evaluate the influence of different concentrations of inulin and pectin as fat substitutes on the chemical composition, texture, and sensory acceptance of frankfurter sausages. Six treatments were evaluated to test fat replacement: control (T0); low fat control (T1); low fat with 15% inulin (T2); low fat with 30% inulin (T3); low fat with 7.5% inulin and 7.5% pectin (T4); and low fat with 15% inulin and 15% pectin (T5). The addition of fibers increased the yield (T3 and T5; 98.96%), and the color parameters were slightly reduced (T3). Moisture (61.14%) and ashes (6.96%) of sausages with inulin and pectin were higher (T5), while shear force, hardness, fracturability, gumminess, and chewiness (T3 and T5) were slightly lower than those of the control. The addition of inulin (T2) increased the sensory acceptance of the sausages (5.75). Fat can be replaced with inulin and pectin in frankfurter sausages to produce healthy and functional products.

Internal Changes in International New Ventures During Initial Internationalization: Finnish SMEs Operating in Dynamic High-tech Industries

The purpose of this qualitative research is to study how international new ventures change internally during initial internationalization. Based on the analysis of seven INV firms, a framework illustrating this change process, will be developed. This research will also develop earlier theories, and create a solid combination of existing theories to explain the phenomenon. INV firms internationalize more rapidly and aggressively than traditional MNEs. At the same, external and internal drivers cause changes in INVs culture, resources, capabilities, strategic management, and output decisions inside the company. Organizational learning and resource acquisition through international business networks explain how INVs are able to cope with the dynamic high-technology industry and be able to adapt. Internationalization of INVs proceeds through several phases, which may be gone through rapidly due to the network effects and INVs’ special characteristics. The results of this research revealed that INVs internal change process proceeds through four phases; pre-incorporation phase, product development phase, internationalization and growth phase, and maturation phase. INVs culture, resources, capabilities, strategic management, and outputs change significantly during initial internationalization, and INVs develop from small start-ups into fully established companies.

Energy Efficiency in Electrical Drive Systems: Technical potentials, barriers and policy approaches for small and medium industries in Ghana

Today industries and commerce in Ghana are facing enormous energy challenge. The pressure is on for industries to reduce energy consumption, lower carbon emissions and provide se-cured power supply. Industrial electric motor energy efficiency improvement is one of the most important tools to reduce global warming threat and reduce electricity bills. In order to develop a strategic industrial energy efficiency policy, it is therefore necessary to study the barriers that inhibit the implementation of cost – effective energy efficiency measures and the driving forces that promote the implementation. The aim of this thesis is to analyse the energy consumption pattern of electric motors, study factors that promote or inhibit energy efficiency improvements in EMDS and provide cost – effective solutions that improve energy efficiency to bridge the existing energy efficiency gap in the surveyed industries. The results from this thesis has revealed that, the existence of low energy efficiency in motor-driven systems in the surveyed industries were due to poor maintenance practices, absence of standards, power quality issues, lack of access to capital and limited awareness to the im-portance of energy efficiency improvements in EMDS. However, based on the results pre-sented in this thesis, a policy approach towards industrial SMEs should primarily include dis-counted or free energy audit in providing the industries with the necessary information on potential energy efficiency measures, practice best motor management programmes and estab-lish a minimum energy performance standard (MEPS) for motors imported into the country. The thesis has also shown that education and capacity development programmes, financial incentives and system optimization are effective means to promote energy efficiency in elec-tric motor – driven systems in industrial SMEs in Ghana

Le Progrès manufacturier : journal spécial de toutes les grandes industries et du crédit manufacturier

1855/07/01 (A1).

Le Progrès manufacturier : journal spécial de toutes les grandes industries et du crédit manufacturier

1855/07/22 (A1).

Le Progrès manufacturier : journal spécial de toutes les grandes industries et du crédit manufacturier

1855/07/29 (A1).

Le Progrès manufacturier : journal spécial de toutes les grandes industries et du crédit manufacturier

1855/10/14 (A1,N22).

Le Progrès manufacturier : journal spécial de toutes les grandes industries et du crédit manufacturier

1855/12/30 (A1,N33).