Rationalisation and improvement of a company's engineering design procedures

There is a great deal of literature about the initial stages of innovative design. This is the process whereby a completely new product is conceived, invented and developed. In industry, however, the continuing success of a company is more often achieved by improving or developing existing designs to maintain their marketability. Unfortunately, this process of design by evolution is less well documented. This thesis reports the way in which this process was improved for the sponsoring company. The improvements were achieved by implementing a new form of computer aided design (C.A.D.) system. The advent of this system enabled the company to both shorten the design and development time and also to review the principles underlying the existing design procedures. C.A.D. was a new venture for the company and care had to be taken to ensure that the new procedures were compatible with the existing design office environment. In particular, they had to be acceptable to the design office staff. The C.A.D. system produced guides the designer from the draft specification to the first prototype layout. The computer presents the consequences of the designer's decisions clearly and fully, often by producing charts and sketches. The C.A.D. system and the necessary peripheral facilities were implemented, monitored and maintained. The system structure was left sufficiently flexible for maintenance to be undertaken quickly and effectively. The problems encountered during implementation are well documented in this thesis.

Review: bariatric surgery:to treat diabesity

In obese patients bariatric surgery is increasing in popularity as a strategy to promote, and maintain, weight loss. In obese type 2 diabetes bypass, bariatric surgery improves glycaemic control g€" often to a greater extent than would be anticipated by weight loss alone. Surgical bypass procedures appear to initially offer a greater glucose-lowering effect than surgical restriction procedures. This review considers the rationale for bariatric surgery as a treatment for diabesity and the implications of the different procedures on the secretion and action of enteral hormones.

Excimer laser surface ablation - a review

Corneal surface laser ablation procedures for the correction of refractive error have enjoyed a resurgence of interest, especially in patients with a possible increased risk of complications after lamellar surgery. Improvements in the understanding of corneal biomechanical changes, the modulation of wound healing, laser technology including ablation profiles and different methods for epithelial removal have widened the scope for surface ablation. This article discusses photorefractive keratectomy, trans-epithelial photorefractive keratectomy, laser-assisted sub-epithelial keratomileusis and epithelial-laser-assisted in situ keratomileusis. © 2010 The Authors. Journal compilation © 2010 Royal Australian and New Zealand College of Ophthalmologists.

Költség- és időcsökkentési eljárások alkalmazása a projekttervezésben és a nyomon követésben = Application of cost and time reduction procedures in project planning and the follow-up

A válság okozta megszorítások a projektek költségvetését sem hagyták változatlanul. Nagyon sokszor nemcsak a jövőbeni projekttervek költségvetését kell átgondolni, hanem a már futó projektek költségvetését is újra kell szabni. E tanulmány ilyen esetekben nyújthat módszertani támogatást. A szerző ebben a kutatásban négy költség- és időcsökkentő módszert hasonlít össze. Ismerteti, hogy ezeket az eljárásokat milyen módon lehet ötvözni, illetve mikor, melyiket célszerű alkalmazni. Az eljárások között van olyan módszer, amely a hagyományos projektmenedzsment (pl. építési, beruházási projektek menedzselésének) eszköztárát gazdagítja, de találkozhatunk olyan eljárásokkal is, amelyek az agilis projektszemléleten alapuló módszerek körét szélesítik. A bemutatott módszerek nemcsak a hálótervezési, hanem a mátrixos projekttervezési eljárások esetén is alkalmazhatók. ____ Due to the effects of the crisis, budgets of present as well as future projects are decreasing steadily. In this study four different methods are introduced for minimising budget and time demands. These introduced methods support not only the traditional but also the agile project management. Furthermore these methods can be used not only in case of network planning, but also for matrix-based project planning.

Participative Budgeting and Participant Motivation: A Review of the Literature

In their discussion - Participative Budgeting and Participant Motivation: A Review of the Literature - by Frederick J. Demicco, Assistant Professor, School of Hotel, Restaurant and Institutional Management, The Pennsylvania State University and Steven J. Dempsey, Fulton F. Galer, Martin Baker, Graduate Assistants, College of Business at Virginia Polytechnic Institute and State University, the authors initially observe: “In recent years behavioral literature has stressed the importance of participation In goal-setting by those most directly affected by those goals. The common postulate is that greater participation by employees in the various management functions, especially the planning function, will lead to improved motivation, performance, coordination, and functional behavior. The authors analyze this postulate as it relates to the budgeting process and discuss whether or not participative budgeting has a significant positive impact on the motivations of budget participants.” In defining the concept of budgeting, the authors offer: “Budgeting is usually viewed as encompassing the preparation and adoption of a detailed financial operating plan…” In furthering that statement they also furnish that budgeting’s focus is to influence, in a positive way, how managers plan and coordinate the activities of a property in a way that will enhance their own performance. In essence, framing an organization within its described boundaries, and realizing its established goals. The authors will have you know, to control budget is to control operations. What kind of parallels can be drawn between the technical methods and procedures of budgeting, and managerial behavior? “In an effort to answer this question, Ronen and Livingstone have suggested that a fourth objective of budgeting exists, that of motivation,” say the authors with attribution. “The managerial function of motivation is manipulative in nature.” Demicco, Dempsey, Galer, and Baker attempt to quantify motivation as a psychological premise using the expectancy theory, which encompasses empirical support, intuitive appeal, and ease of application to the budgetary process. They also present you with House's Path-Goal model; essentially a mathematics type formula designed to gauge motivation. You really need to see this. The views of Argyris are also explored in particular detail. Although, the Argyris study was primarily aimed at manufacturing firms, and the effects on line-supervisors of the manufacturing budgets which were used to control and evaluate their performance, its application is relevant to the hospitality industry. As the title suggests, other notables in the field of behavioral motivation theory, and participation are also referenced. “Behavioral theory has been moving away from models of purported general applicability toward contingency models that are suited for particular situations,” say the authors in closing. “It is conceivable that some time in the future, contingency models will make possible the tailoring of budget strategies to individual budget holder personalities.”

Operant and respondent procedures to establish social stimuli as reinforcers in children with autism

According to the DSM-IV- TR (American Psychiatric Association, 2000), one of the core deficits in autism is in the impairment of social interaction. Some have suggested that underlying these deficits is the reality that individuals with autism do not find social stimuli to be as reinforcing as other types of stimuli (Dawson, 2008). An interesting and growing body of literature supports the notion that symptoms in autism may be caused by a general reduction in social motivation (Chevallier et al., 2012). A review of the literature suggests that social orienting and social motivation are low in individuals with autism, and including social motivation as a target for therapeutic intervention should be pursued (Helt et al., 2008). Through our understanding of learning processes, researchers in behavior analysis and related fields have been able to use conditioning procedures to change the function of neutral or ineffective stimuli, including tokens (Ayllon & Azrin, 1968), facial expressions (Gewirtz & Pelaez-Nogueras, 1992) and praise (Dozier et al., 2012). The current study aimed to use operant and respondent procedures to condition social stimuli that were empirically shown to not be reinforcing prior to conditioning. Further, this study aimed to compare the two procedures in their effectiveness to condition social stimuli to function as reinforcers, and in their maintenance of effects over time. Using a multiple-baseline, multi-element design, one social stimulus was conditioned under each procedure to compare the different response rates following conditioning. Finally, the study sought to determine if conditioning social stimuli to function as reinforcers had any effect on the social functioning of young children with autism. Six children diagnosed with autism between the ages of 18 months and 3 years participated. Results show that the respondent procedure (pairing) resulted in more robust and enduring effects than the operant procedure (Sd procedure). Results of a social communication assessment (ESCS, Mundy et al., 2003) before and after conditioning demonstrate gains in all areas of social communication, particularly in the areas of initiating and responding to joint attention.^

Fiducial Marker Guided Prostate Radiotherapy: A Review

Image guided radiotherapy (IGRT) is an essential tool in the accurate delivery of modern radiotherapy techniques. Prostate radiotherapy positioned using skin marks or bony anatomy may be adequate for delivering a relatively homogenous whole pelvic radiotherapy dose but these are not reliable when using reduced margins, dose escalation or hypo-fractionated stereotactic radiotherapy. Fiducial markers (FMs) for prostate IGRT have been in use since the 1990's. They require surgical implantation and provide a surrogate for the position of the prostate gland. A variety of FMs are available and they can be used in a number of ways. This review aims to establish the evidence for using prostate FMs in terms of feasibility, implantation procedures, types of FMs used, FM migration, imaging modalities used and the clinical impact of FMs. A search strategy was defined and a literature search was carried out in Medline. Inclusion and exclusion criteria were applied which resulted in 50 papers being included in this review. The evidence demonstrates that FMs provide a more accurate surrogate for the position of the prostate than either external skin marks or bony anatomy. A combination of FM alignment and soft tissue analysis is currently the most effective and widely available approach to ensuring accuracy in prostate IGRT. FM implantation is safe and well tolerated. FM migration is possible but minimal. Standardisation of all techniques and procedures in relation to the use of prostate FMs is required. Finally a clinical trial investigating a non-surgical alternative to prostate FMS is introduced.

Internal cooling in rotational molding-A review

Rotational molding suffers from a relatively long cycle time, which hampers more widespread growth of the process. During each cycle, both the polymer and mold must be heated from room temperature to above polymer melting temperature and subsequently cooled to room temperature. The cooling time in this process is relatively long due to the poor thermal conductivity of plastics. Although rapid external cooling is possible, internal cooling rates are the major limitation. This causes the process to be uneconomical for large production runs of small parts. Various researchers have strived to minimize cycle times by applying various internal cooling procedures. This article presents a review of these methods, including computer simulations and practical investigations published to date. The effects of cooling rate on the morphology, shrinkage, warpage, and impact properties of rotationally molded polyolefins are also highlighted. In general, rapid and symmetrical cooling across the mold results in smaller spherulite size, increased mechanical properties and less potential warpage or distortion in moldings. POLYM. ENG. SCI., 2011. ©2011 Society of Plastics Engineers.

Complications after laparoscopic Roux-en-Y gastric bypass: a diagnostic challenge. Report of three cases and review of the literature

The number of Laparoscopic Roux-en-Y Gastric Bypass (LRYGB) procedures for morbid obesity and type 2 diabetes mellitus will increase worldwide, and therefore, an increase in perioperative morbidity can be anticipated. The authors present three cases based on different complications after LRYGB to demonstrate the diagnostic challenge that clinicians face in this particular group of patients. Also, a review of the literature covering the value of different imaging in these particular cases is provided by the authors. The role of imaging in the diagnostic process is discussed.

A review of the South Carolina Transportation Infrastructure Bank

Members of the General Assembly asked the Legislative Audit Council to review the operations of the South Carolina Transportation Infrastructure Bank, a state agency that awards grants and loans to local and state agencies primarily for large transportation construction projects. The primary audit objectives were to review compliance with state law and policies regarding: The awarding of grants and loans for transportation construction projects ; The use of project revenues and whether funds dedicated to specific projects have been comingled with funds dedicated to other projects ;• Proper accounting and reporting procedures ; The process for repayment of revenue bonds ; Hiring of consultants, attorneys, and bond credit rating agencies ; Ethics.

Optimal static and sequential design : a critical review

The aim of this thesis is to review and augment the theory and methods of optimal experimental design. In Chapter I the scene is set by considering the possible aims of an experimenter prior to an experiment, the statistical methods one might use to achieve those aims and how experimental design might aid this procedure. It is indicated that, given a criterion for design, a priori optimal design will only be possible in certain instances and, otherwise, some form of sequential procedure would seem to be indicated. In Chapter 2 an exact experimental design problem is formulated mathematically and is compared with its continuous analogue. Motivation is provided for the solution of this continuous problem, and the remainder of the chapter concerns this problem. A necessary and sufficient condition for optimality of a design measure is given. Problems which might arise in testing this condition are discussed, in particular with respect to possible non-differentiability of the criterion function at the design being tested. Several examples are given of optimal designs which may be found analytically and which illustrate the points discussed earlier in the chapter. In Chapter 3 numerical methods of solution of the continuous optimal design problem are reviewed. A new algorithm is presented with illustrations of how it should be used in practice. It is shown that, for reasonably large sample size, continuously optimal designs may be approximated to well by an exact design. In situations where this is not satisfactory algorithms for improvement of this design are reviewed. Chapter 4 consists of a discussion of sequentially designed experiments, with regard to both the philosophies underlying, and the application of the methods of, statistical inference. In Chapter 5 we criticise constructively previous suggestions for fully sequential design procedures. Alternative suggestions are made along with conjectures as to how these might improve performance. Chapter 6 presents a simulation study, the aim of which is to investigate the conjectures of Chapter 5. The results of this study provide empirical support for these conjectures. In Chapter 7 examples are analysed. These suggest aids to sequential experimentation by means of reduction of the dimension of the design space and the possibility of experimenting semi-sequentially. Further examples are considered which stress the importance of the use of prior information in situations of this type. Finally we consider the design of experiments when semi-sequential experimentation is mandatory because of the necessity of taking batches of observations at the same time. In Chapter 8 we look at some of the assumptions which have been made and indicate what may go wrong where these assumptions no longer hold.

JERICO Next. Rules and procedures for TNA. D8.9

The JERICO-NEXT Trans National Access (TNA) activity is built on the successful experience of the previous FP7 JERICO project, G.A. 262584 (Sparnocchia et al., 2014, 2016). However, it will involve a greater number of observatories distributed, as before, in coastal and shelf seas all around Europe, including some dedicated to biological observation (see D7.1 for a detailed description). A limited number of supporting facilities (calibration and research laboratories) and one item of special equipment are also included in the TNA service catalogue. This document relates to WP8 - Outreach, communication and engagement, and in particular to Task 8.8: Implementing Transnational Access to coastal observatories. It describes the procedures adopted for providing TNA during the three planned Calls for proposals, one per year from May 2016 until 2018. These procedures are a review and update of those already used by JERICO. Updates of this report prior to the next Call are possible and will depend on new needs that may emerge while conducting the first Call.

Exploring plant tissue culture to improve the production of phenolic compounds: A review

Plant tissue and organ culture has been extensively used from the beginning of the XX century for the study and comprehension of some primary biological mechanisms such as morphogenesis. However, with the increasing demand of the market for novel products derived from plants, in vitro culture became a reliable technique for the mass production of plant material. Moreover, the potential to use this technique for the production of some bioactive compounds, such as phenolic compounds, is immense since it allows the manipulation of the biosynthetic routes to increase the production and accumulation of specific compounds. This work intends to make a brief historical review of in vitro culture, highlighting its use for the production of bioactive compounds. Also, emphasizes the importance of phenolic compounds for the consumer as well reviews the metabolic pathways involved in its production in plant cells. Furthermore, it was carried out a comprehensive study on the work developed for the production of plant phenolic compounds in in vitro cultures, as well as on the type of elicitors used to increase of the same production; also a brief highlighting of the phenolic compounds which serve as elicitors. There are numerous reports directed to the production of phenolic extracts in in vitro plant cultures, however there is a lack in the production of individual phenolic compounds mainly due to the complexity of the biosynthetic routes and extraction procedures. Elicitation procedures are often used to increase the production of phenolics, archieving in most cases higher yields than in non-elicitated cultures. The increasing production of bioactive phenolic extracts/compounds allows for their further applicability, namely in the industry of functional foods or in pharmaceutical/medical fields.

Orthopaedic anaesthesia for upper extremity procedures in a Nigerian hospital

Background General anaesthesia and regional anaesthesia have been used successfully for upper extremity orthopaedic procedures. Despite the advantages of regional anaesthesia, there is low utilisation in Nigeria. In this study, we assessed the types of anaesthesia employed for upper extremity surgeries in our centre. Methods After obtaining approval from the institutional ethics committee, all the patients who had upper extremity surgeries from 1 January 2011 to 31 December 2012 were included in this review. Both prospective and retrospective data were gathered. The choice of anaesthesia was at the discretion of the attending anaesthetist. Results A total of 226 patients with a male-to-female ratio of 1.6:1 and median age of 35.0 (range 2 – 89) years, had orthopaedic upper extremity procedures during the study period. Sixty-three cases (27.9%) had general anaesthesia, 5 (2.2%) combined regional and general anaesthesia while 158 (69.9%) had regional blocks. The regional blocks comprised 145 (89%) different approaches to the brachial plexus and 18 (11%) local anaesthetic infiltrations. The arm was the site mostly operated upon; while supraclavicular and axillary brachial plexus blocks were performed in equal amounts. In 14 (6.2%) patients, brachial plexus blocks were performed with spinal anaesthesia because of concomitant iliac crest bone grafts. While the duration of surgery did not differ significantly, regional anaesthesia provided a significantly longer duration of anaesthesia than general anaesthesia (251 ± 70.8 min versus 141.3 ± 65.5 min; p = 0.0000001). Conclusion There is a high use of regional anaesthesia for upper extremity orthopaedic surgeries in our centre, which is a positive development in a resource limited setting.