Reliability and availability in reconfigurable computing: a basis for a common solution

Dynamically reconfigurable SRAM-based field-programmable gate arrays (FPGAs) enable the implementation of reconfigurable computing systems where several applications may be run simultaneously, sharing the available resources according to their own immediate functional requirements. To exclude malfunctioning due to faulty elements, the reliability of all FPGA resources must be guaranteed. Since resource allocation takes place asynchronously, an online structural test scheme is the only way of ensuring reliable system operation. On the other hand, this test scheme should not disturb the operation of the circuit, otherwise availability would be compromised. System performance is also influenced by the efficiency of the management strategies that must be able to dynamically allocate enough resources when requested by each application. As those resources are allocated and later released, many small free resource blocks are created, which are left unused due to performance and routing restrictions. To avoid wasting logic resources, the FPGA logic space must be defragmented regularly. This paper presents a non-intrusive active replication procedure that supports the proposed test methodology and the implementation of defragmentation strategies, assuring both the availability of resources and their perfect working condition, without disturbing system operation.

Evaluation of the Electric Vehicle Impact in the Power Demand Curve in a Smart Grid Environment

Smart grids with an intensive penetration of distributed energy resources will play an important role in future power system scenarios. The intermittent nature of renewable energy sources brings new challenges, requiring an efficient management of those sources. Additional storage resources can be beneficially used to address this problem; the massive use of electric vehicles, particularly of vehicle-to-grid (usually referred as gridable vehicles or V2G), becomes a very relevant issue. This paper addresses the impact of Electric Vehicles (EVs) in system operation costs and in power demand curve for a distribution network with large penetration of Distributed Generation (DG) units. An efficient management methodology for EVs charging and discharging is proposed, considering a multi-objective optimization problem. The main goals of the proposed methodology are: to minimize the system operation costs and to minimize the difference between the minimum and maximum system demand (leveling the power demand curve). The proposed methodology perform the day-ahead scheduling of distributed energy resources in a distribution network with high penetration of DG and a large number of electric vehicles. It is used a 32-bus distribution network in the case study section considering different scenarios of EVs penetration to analyze their impact in the network and in the other energy resources management.

Partial classification of Lorenz knots: Syllable permutations of torus knots words

We define families of aperiodic words associated to Lorenz knots that arise naturally as syllable permutations of symbolic words corresponding to torus knots. An algorithm to construct symbolic words of satellite Lorenz knots is defined. We prove, subject to the validity of a previous conjecture, that Lorenz knots coded by some of these families of words are hyperbolic, by showing that they are neither satellites nor torus knots and making use of Thurston's theorem. Infinite families of hyperbolic Lorenz knots are generated in this way, to our knowledge, for the first time. The techniques used can be generalized to study other families of Lorenz knots.

Nonautonomous Graphs and Topological Entropy of Nonautonomous Lorenz Systems

In this work, we associate a p-periodic nonautonomous graph to each p-periodic nonautonomous Lorenz system with finite critical orbits. We develop Perron-Frobenius theory for nonautonomous graphs and use it to calculate their entropy. Finally, we prove that the topological entropy of a p-periodic nonautonomous Lorenz system is equal to the entropy of its associated nonautonomous graph.

A reliability-based measure of robustness for concrete structures subjected to corrosion

This work is a contribution to the definition and assessment of structural robustness. Special emphasis is given to reliability of reinforced concrete structures under corrosion of longitudinal reinforcement. On this communication several authors’ proposals in order to define and measure structural robustness are analyzed and discussed. The probabilistic based robustness index is defined, considering the reliability index decreasing for all possible damage levels. Damage is considered as the corrosion level of the longitudinal reinforcement in terms of rebar weight loss. Damage produces changes in both cross sectional area of rebar and bond strength. The proposed methodology is illustrated by means of an application example. In order to consider the impact of reinforcement corrosion on failure probability growth, an advanced methodology based on the strong discontinuities approach and an isotropic continuum damage model for concrete is adopted. The methodology consist on a two-step analysis: on the first step an analysis of the cross section is performed in order to capture phenomena such as expansion of the reinforcement due to the corrosion products accumulation and damage and cracking in the reinforcement surrounding concrete; on the second step a 2D deteriorated structural model is built with the results obtained on the first step of the analysis. The referred methodology combined with a Monte Carlo simulation is then used to compute the failure probability and the reliability index of the structure for different corrosion levels. Finally, structural robustness is assessed using the proposed probabilistic index.

Study of the Reliability of Statistical Timing Analysis for Real-Time Systems

Presented at 23rd International Conference on Real-Time Networks and Systems (RTNS 2015). 4 to 6, Nov, 2015, Main Track. Lille, France.

Reliability of Two Methods for Identifying the Postural Phase of Gait Initiation in Healthy and Post-stroke Subjects

This study aims to compare two methods of assessing the postural phase of gait initiation as to intrasession reliability, in healthy and post-stroke subjects. As a secondary aim, this study aims to analyse anticipatory postural adjustments during gait initiation based on the centre of pressure (CoP) displacements in post-stroke participants. The CoP signal was acquired during gait initiation in fifteen post-stroke subjects and twenty-three healthy controls. Postural phase was identified through a baseline-based method and a maximal displacement based method. In both healthy and post-stroke participants higher intra-class correlation coefficient and lower coefficient of variation values were obtained with the baseline-based method when compared to the maximal displacement based method. Post-stroke participants presented decreased CoP displacement backward and toward the first swing limb compared to controls when the baseline-based method was used. With the maximal displacement based method, there were differences between groups only regarding backward CoP displacement. Postural phase duration in medial-lateral direction was also increased in post-stroke participants when using the maximal displacement based method. The findings obtained indicate that the baseline-based method is more reliable detecting the onset of gait initiation in both groups, while the maximal displacement based method presents greater sensitivity for post-stroke participants.

Reliability analysis of a timber truss system subjected to decay

Assessing the safety of existing timber structures is of paramount importance for taking reliable decisions on repair actions and their extent. The results obtained through semi-probabilistic methods are unrealistic, as the partial safety factors present in codes are calibrated considering the uncertainty present in new structures. In order to overcome these limitations, and also to include the effects of decay in the safety analysis, probabilistic methods, based on Monte-Carlo simulation are applied here to assess the safety of existing timber structures. In particular, the impact of decay on structural safety is analyzed and discussed, using a simple structural model, similar to that used for current semi-probabilistic analysis.

Aircraft Engines Maintenance Costs and Reliability: An Appraisal of the Decision Process to Remove an Engine for a Shop Visit Aiming at Minimum Maintenance Unit Cost

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.

Contributo para a validação da versão portuguesa da Quebec Back Pain Disability Scale : fiabilidade e poder de resposta em utentes com dor lombar crónica

RESUMO: Um dos principais resultados das intervenções de Fisioterapia dirigidas a utentes com Dor Lombar Crónica (DLC) é reduzir a incapacidade funcional. A Quebec Back Pain Disability Scale (QBPDS) é um instrumento amplamente aceite a nível internacional na medição do nível de incapacidade funcional reportada pelos indivíduos com DLC. O objetivo deste estudo é dar um contributo para a adaptação cultural da versão portuguesa da QBPDS (QBPDS-VP) e investigar o poder de resposta e interpretabilidade da escala. Metodologia: Realizou-se um estudo metodológico, multicentro, baseado num coorte prospetivo de 132 utentes com DLC. Os utentes foram recrutados a partir da lista de espera de 16 serviços de Medicina Física e de Reabilitação/Fisioterapia de várias áreas geográficas de Portugal. A QBPDS- VP foi administrada 3 vezes, em 3 momentos de recolha de dados distintos: T0 - momento inicial (utentes em lista de espera); T1 - 1 semana de intervalo (início dos tratamentos de Fisioterapia); e T2 - 6 semanas de intervalo (pós-intervenção de Fisioterapia). Os dados recolhidos em T0 foram utilizados para a análise fatorial e para o estudo da consistência interna (n=132); os dados da amostra emparelhada de T0 e T1 (n=132) para a fiabilidade teste-reteste; e os dados da amostra emparelhada de T0 e T2 (n=120) para a análise do poder de resposta e interpretabilidade. A âncora externa utilizada foi a perceção global de mudança, neste caso a PGIC- VP, que foi respondida em T1 e T2. O nível de significância para o qual os valores se consideraram satisfatórios foi de p≤ 0,05. O tratamento dos dados foi realizado no software IBM SPSS Statistics (versão 20). Resultados: A QBPDS- VP é uma escala unidimensional, que revela uma excelente consistência interna (α de Cronbach= 0,95) e uma fiabilidade teste-reteste satisfatória (CCI= 0,696; IC 95%: 0,581–0,783). Esta escala demonstrou um poder de resposta moderado, quando aplicada em utentes com DLC ( = 0,426 e AAC= 0,741; IC 95%: 0,645 – 0,837). A Diferença Mínima Detetável (DMD) estimada foi de 19 pontos e as estimativas da Diferença Mínima Clinicamente Importante (DMCI) variaram entre 7 (pelo método curva ROC) e 8 pontos (pelo método “diferença média de pontuação”). A estimativa pela curva ROC deriva do ponto ótimo de corte de 6,5 pontos, com Área Abaixo da Curva (AAC)= 0,741, sensibilidade de 72%, e especificidade de 71%. Uma análise complementar da curva ROC baseada nas diferenças de pontuações da QBPDS, expressa em percentagem, revelou um ponto ótimo de corte de - 24% (AAC= 0,737, sensibilidade de 71%, e especificidade de 71%). Para pontuações iniciais da QBPDS- VP mais altas (≥34 pontos), foi encontrado um ponto ótimo de corte de 10,5 pontos (AAC= 0,738, sensibilidade de 73%, e especificidade de 67%). Conclusão: A QBPDS-VP demonstrou bons níveis de fiabilidade e poder de resposta, recomendando-se o seu uso na medição e avaliação da incapacidade funcional de utentes com DLC. A DMD estimada, de 19 pontos, determinou uma amplitude válida da QBPDS-VP de 19 a 81 pontos. Este estudo propõe estimativas de DMCI da QBPDS- VP numa aplicação específica da escala (em utentes com DLC que são referidos para a intervenção de Fisioterapia). A pontuação inicial da QBPDS- VP deve ser considerada na interpretação de mudanças de pontuação, após a intervenção de Fisioterapia.------------ ABSTRACT: One of the main results of physiotherapy interventions for patients with Chronic Low Back Pain (CLBP) is decrease the functional disability. The Quebec Back Pain Disability Scale (QBPDS) is an instrument widely accepted internationally, in measuring the level of disability reported by individuals with CLBP. The purpose of this study is to contribute to the cultural adaptation of the Portuguese version of QBPDS (QBPDS - PV) and investigate the Responsiveness and Interpretability of QBPDS-PV. Methodology: This was a methodological and multicenter study, based on a sample of 132 subjects with CLBP. The patients were recruited from the waiting lists of 16 medicine rehabilitation service, in many Portugal districts. The Quebec Back Pain Disability Scale was administered in three different moments: T0 – baseline (patients in the waiting list); T1- one week after T0 (the beginning of treatment); and T2 – six weeks after T1 (the posttreatment). The data collected at T0 were used for factor analysis and to study the internal consistency (n = 132); paired sample data of T0 and T1 (n=132) were used for test-retest reliability, and sample data paired for T0 and T2 (n=120) used for responsiveness and interpretability analysis. The external anchor was the global perception of change, measured by the Portuguese version of Patient’s Global Impression of Change (PGIC) Scale. The minimal level of significance established was p ≤ 0,05. Data analysis was performed using the IBM SPSS Statistics software (version 20). Results: The QBPDS-PV is a unidimensional scale, demonstrates an excellent internal consistency (Cronbach's α=0.95) and satisfactory test-retest reliability (ICC= 0.696, 95% CI: 0.581–0.783). The scale revealed moderate responsiveness when applied to patients with CLBP ( = 0.426 and AUC= 0.741, 95% CI: 0.645 - 0.837). The Smallest Detectable Change (SDC) was 19 points, whereas the Minimal Clinically Important Change (MCIC) ranged between 7 (ROC curve method) and 8 points (by the "mean difference score"). The estimate was derived from the ROC curve by an optimal cutoff point of 6.5 points, with Area Under the Curve (AUC)= 0.741, sensitivity 72%, and specificity of 71%. A complementary analysis of the ROC curve based on differences in QBPDS scores from baseline, expressed in percentage, revealed an optimal cutoff point of -24% (AUC= 0.737, sensitivity of 71%, and specificity of 71%). For the highest initial scores of QBPDS-PV (≥ 34 points) was found an optimal cutoff of 10.5 points (AUC= 0.738, sensitivity of 73%, and specificity 67%). Conclusion: The QBPDS-PV demonstrated good levels of reliability and responsiveness, being recommended its use in the measurement and evaluation of disability of patients with CLBP. The SDC of 19 points determined the QBPDS‟ scale width of 19 to 81. This study proposes MCIC values for QBPDS –PV for this specific setting (in CLBP patients who are referred for physiotherapy intervention). The QBPDS –PV baseline score have to be taken into account while interpreting the score change after physiotherapy intervention.

Contribuição para a adaptação cultural do Neck Disability Index e caraterização da prática de fisioterapia em pacientes com dor crónica cervical

RESUMO: Objetivo: Este trabalho teve como objetivo contribuir para o processo de adaptação cultural do Neck Disability Index (NDI), através da análise da sua unidimensionalidade e do estudo da sua fiabilidade (consistência interna e fiabilidade teste-reteste), validade de constructo e poder de resposta. De igual forma pretendeu-se caraterizar a intervenção realizada pela fisioterapia e os resultados obtidos em pacientes com Dor Cervical Crónica (DCC). Introdução: A dor cervical é um problema cada vez mais comum nos países industrializados, constituindo uma das três condições mais frequentemente reportadas por queixas de origem músculo-esquelética. A sua incidência é um fenómeno em crescimento, com custos implicados para a sociedade. Desta forma reconhece-se a importância de um instrumento que monitorize a evolução da incapacidade funcional associada à DCC. O NDI é atualmente o instrumento de avaliação mais recomendado para avaliar a incapacidade funcional associada à dor cervical. Foi traduzido e adaptado à língua portuguesa, mas à data não foi realizada nenhuma avaliação das suas propriedades psicométricas. Por outro lado, apesar de a literatura referir que os serviços de Fisioterapia são extremamente procurados por indivíduos com DCC, em Portugal, a informação sobre a sua prática nesta condição clínica é escassa ou mesmo inexistente. Assim, e sendo a incapacidade nas atividades funcionais uma das variáveis de maior impacto da DCC e ao mesmo tempo um dos resultados principais da intervenção da Fisioterapia, importa por um lado possuir instrumentos capazes de avaliar o nível de incapacidade funcional e a sua mudança, e por outro, aferir qual a intervenção realizada pela Fisioterapia e quais os resultados obtidos. Metodologia: Realizou-se um estudo de coorte prospetivo com uma amostra de conveniência, do tipo não probabilístico, constituída por 88 pacientes com DCC de origem músculo-esquelética e causa não traumática referenciados para 6 serviços de fisioterapia / medicina física e de reabilitação de clínicas e centros de reabilitação, sendo elegíveis todos os pacientes que cumprissem os critérios de inclusão e exclusão estabelecidos. Os pacientes foram avaliados em três momentos pré-definidos: antes do início das sessões de fisioterapia ou na 1ª semana de tratamento; 4 a 7 dias após a 1ª avaliação; e 7 semanas após o início da fisioterapia. Para verificação da unidimensionalidade do NDI, procedeu-se a uma Análise Fatorial Exploratória. As propriedades psicométricas do NDI avaliadas foram a Fiabilidade (consistência interna e fiabilidade teste-reteste), a Validade de Constructo e o Poder de Resposta. Posteriormente procedeu-se à caraterização da prática da fisioterapia quanto às modalidades utilizadas, número de sessões de tratamento e duração do episódio de cuidados. Adicionalmente descreveu-se os resultados obtidos após a intervenção da fisioterapia ao nível da dor e incapacidade. Resultados: os resultados obtidos foram positivos e significativos, com a confirmação da unidimensionalidade do NDI, sendo que em todos os critérios seguidos o fator mínimo retido foi de um. Na avaliação da consistência interna o valor obtido foi acima do mínimo aceitável (α Cronbach = 0,77), enquanto o valor de fiabilidade teste-reteste foi elevado (CCI =0,95). De igual forma, os resultados foram positivos para a validade de constructo, obtendo-se uma associação positiva do NDI com a Escala Numérica da dor (END). O valores de poder de resposta reportaram uma Área Abaixo da Curva de 0,63 (IC 95%=0,51-0,75), com valor de Diferença Mínima Clinicamente importante de 5,5 pontos (sensibilidade = 69,6%; especificidade = 43,6%). Relativamente á intervenção de fisioterapia em casos de DCC verificou-se que as características da prática da fisioterapia reportadas neste relatório são de difícil comparação ou análise dada a escassez ou inexistência de trabalhos publicados sobre este assunto em pacientes com DCC. No entanto, neste estudo, encontraram-se reduções significativas na intensidade da dor e incapacidade funcional após a intervenção de fisioterapia (z= -7,16; p<0,001 e t= 10,412, p<0,05, respetivamente). Conclusão: Os resultados do presente estudo revelam que o NDI-VP possui uma boa Fiabilidade, Validade de Constructo e Poder de Resposta. Revela ainda que a intervenção da fisioterapia em casos de DCC, apesar da escassez de trabalhos publicados, proporciona uma redução significativa dos níveis de dor e incapacidade em pacientes com DCC.--------------- ABSTRACT:Objective: the aim of this study was to contribute for the process of cultural adaption of the Neck Disability Index (NDI), through the analysis of his unidimensionality and the study of his reliability (internal consistency and test-retest reliability), construct validity and responsiveness. At the same time it pretends to characterize the intervention performed by physical therapy and the results in patients with Chronic Neck Pain (CNP). Introduction: neck pain is a common problem in the industrialized countries, since is one of the three most reported conditions by complaints with musculoskeletal origin. His incidence is a growth phenomena that implicate great costs to society. Therefore the importance of an instrument that monitories the evolution of the functional disability associated to CNP is recognized. Nowadays, NDI is the instrument most recommended to evaluate functional disability associated to neck pain. It has been translated and adapted to portuguese but, till now, no evaluation of his psychometric proprieties has been completed. In the other hand, despite literature refers that physical therapy services are extremely searched by patients with neck pain, in Portugal, the information about practice in this clinical condition is very few or inexistent. Therefore, and since disability in the functional activities is one of the variables with most impact of CNP and, at the same time, one of the main results of physical therapy interventions, it’s important to have instruments capable of evaluate the level of functional disability and his change, and also calculate which intervention of physical therapy is most appropriate and his results. Methodology: it was used a prospective cohort study with a convenience sample, non-probabilistic, consisting of 88 patients with CNP of musculoskeletal origin and non-traumatic cause, referred to 6 physical therapy services of clinics and rehabilitation centers, and fulfilled the inclusion and exclusion criteria established. Patients were evaluated in three pre-defined moments: before the beginning of physical therapy or during the first week of treatment; 4 to 7 days after the first evaluation; and 7 weeks after beginning of physical therapy. To verify NDI unidimensionality, we run an Exploratory Factorial Analysis. NDI psychometric proprieties evaluated were reliability (internal consistency and test-retest reliability), construct validity and responsiveness. Subsequently, it was proceeded the characterization the practice of physical therapy regarding to the modalities used, the number of treatment sessions and duration of the episode of care. Additionally it was described the results obtained after the intervention of the physical therapy, the level of pain and the disability. Results: results were positive and significant, with the confirmation of the NDI unidimensionality, since in every followed criteria the minimal retained factor was one. In the evaluation of internal consistency the value was above the minimal accepted (α Cronbach = 0,77), and the test-retest reliability value was high (CCI =0,95). Results were positive to construct validity, with an positive association of the NDI with Numeric Rating Scale (NRS). Responsiveness values reported an Area Under Curve (AUC) of 0,63 (IC 95%=0,51-0,75) with a Minimal Important Detectable Change (MIDC) of 5,5 points (sensitivity = 69,9%; specificity = 43,6%). Regarding physical therapy interventions in CNP, it was verified that the physical therapy characteristics reported are difficult to compare or analyze since there are very few published studies about this topic. However, in this study, significant reductions were founded in pain intensity and functional disability after intervention(z= -7,16; p<0,001 and t= 10,412, p<0,05, respectively).Conclusion: present study results reveals that NDI has an good reliability, construct validity and responsiveness. It also reveals that physical therapy intervention in CNP, beside few studies published, result in a significant reduction of pain and disability levels in patients with CNP.

Principal component analysis of the yield curve

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Fitting the yield curve

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Inflation forecasts using the tips yield curve

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

The fitting of the German yield curve: A dynamic approach using latent, macroeconomic and stock market variables

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics