Fosfatos com diferentes relações flúor: fósforo na alimentação de frangos de corte

Um experimento foi conduzido com o objetivo de verificar os efeitos de diferentes relações flúor:fosforo na alimentação sobre o desempenho de frangos de corte. Foram utilizados 1.000 pintos de corte de 1 dia distribuídos em um delineamento inteiramente casualizado, com quatro tratamentos e cinco repetições de 50 aves por boxe. Os tratamentos consistiram de quatro fontes de fósforo com relações flúor:fósforo de 1:40, 1:60, 1:80 e 1:100. O experimento foi dividido em três fases experimentais: 1 a 21, 22 a 42 e 43 a 49 dias de idade. Em cada fase, avaliou-se o consumo de ração, o ganho de peso e a conversão alimentar. Ao final do experimento, foram abatidas duas aves de cada repetição para coleta da tíbia e de músculos do peito para análise das concentrações de flúor, cálcio, fósforo e magnésio desses tecidos. As relações flúor:fósforo avaliadas não afetaram o desempenho dos frangos de corte. A deposição óssea de flúor é proporcional à sua concentração na dieta, no entanto, a elevação dos níveis de flúor da dieta não influencia sua deposição nos músculos.

Lisina digestível para frangos de corte machos entre 12 e 22 dias de idade

Avaliou-se nível de lisina digestível para 1050 frangos de corte dos 12 aos 22 dias de idade. O delineamento experimental foi inteiramente ao acaso, com cinco tratamentos, sete repetições e 30 aves por unidade experimental. Os tratamentos foram: 1,05; 1,10; 1,15; 1,20 e 1,25% de lisina digestível. Avaliaram-se ganho de peso, consumo de ração, conversão alimentar, composição e deposição de nutrientes corporais. Foram constatados efeitos quadráticos de lisina digestível no consumo de ração e resposta linear ascendente no peso da carcaça. Na composição química da carcaça, houve resposta quadrática do nível de lisina na concentração de proteína. As taxas de deposição proteica, deposição de água, da carcaça e do corpo total tiveram aumento linear em resposta ao acréscimo de lisina na dieta. O aumento da concentração de lisina, todavia, coincidiu com a redução da matéria mineral nas vísceras e sangue e no corpo total. Considerado o desempenho, o nível 1,1% de lisina digestível atendeu às necessidades do frango de corte entre o 12º e o 22º dia de idade. Consideradas a composição química e as taxas de deposição dos nutrientes corporais, a demanda pelo aminoácido digestível torna-se igual ou maior que 1,25%

Lisina digestível e zinco orgânico para frangos de corte machos na fase de 22 a 42 dias de idade

Os efeitos dietéticos de lisina digestível e zinco quelato para frangos de corte machos entre 22 e 42 dias de idade foram avaliados em dois ensaios experimentais. Adotou-se o delineamento inteiramente casualizado em arranjo fatorial 5 × 2, com cinco níveis de lisina (0,841; 0,876; 0,997; 1,022 e 1,030%) e dois de zinco (43 e 243 ppm). No primeiro ensaio, utilizaram-se 900 aves com peso médio inicial de 957,4 g distribuídas em parcelas experimentais de 30 aves e três repetições e, no segundo ensaio, 180 frangos com peso médio inicial de 866,22 g, divididos em parcelas de três aves e seis repetições. As características avaliadas foram desempenho, rendimento de cortes e composição corporal (1º ensaio), balanço de nitrogênio e digestibilidade aparente das dietas (2º ensaio). Houve interação entre os níveis de lisina e zinco para o ganho de peso, a conversão alimentar, a matéria seca ingerida e o balanço energético. Os rendimentos de peito, coxa e sobrecoxa tiveram aumentos lineares em resposta ao acréscimo no nível de lisina digestível na dieta. O melhor desempenho foi obtido com o nível de 0,997% de lisina digestível (ou 1,134% lisina total) e de 43 ppm de zinco. Para maior rendimento dos cortes, o nível de lisina digestível recomendável deve ser no mínimo 1,002% (ou 1,139% de lisina total), independentemente dos níveis de zinco quelato. A maior inclusão de zinco em dietas para frangos de corte dos 22 aos 42 dias de idade não melhora a utilização da lisina na dieta e aumenta a deposição de gordura corporal.

Disponibilidade de metais pesados em Latossolo com aplicação superficial de escória, lama cal, lodos de esgoto e calcário

O objetivo deste trabalho foi avaliar alguns atributos químicos do solo e a disponibilidade de cádmio (Cd), cromo (Cr), níquel (Ni), mercúrio (Hg), chumbo (Pb) e arsênio (As), por meio da extração pelo DTPA,em conseqüência da aplicação superficial de escória de aciaria, lama cal e lodos de esgoto centrifugados e de biodigestores, nas doses 0 (testemunha), 2, 4 e 8 Mg ha-1 e um tratamento adicional composto pela calagem superficial na dose 2 Mg ha-1. O experimento foi conduzido em delineamento de blocos ao acaso, em condições de campo, em área sob sistema plantio direto, durante 2003 e 2004. A aplicação superficial de escória de aciaria,lama cal, lodo de esgoto centrifugado e de biodigestor, até a dose 8 Mg ha-1, assim como o calcário na dose 2 Mg ha-1, não trazem problemas de disponibilidade ao ambiente, com relação aos metais pesados Cd, Cr, Hg, Pb, Ni e As, quando aplicados sobre a superfície em Latossolo Vermelho distrófico, no sistema plantio direto. A fitodisponibilidade de metais pesados às culturas da soja e aveia-preta foi nula, quando foram aplicadas doses de até 8 Mg ha-1 de lodo de esgoto, escória e lama cal sobre a superfície do solo, no sistema plantio direto

Determination of Threshold Dose of Photodynamic Therapy to Measure Superficial Necrosis

Background Data: Photodynamic therapy (PDT) involves the photoinduction of cytotoxicity using a photosensitizer agent, a light source of the proper wavelength, and the presence of molecular oxygen. A model for tissue response to PDT based on the photodynamic threshold dose (Dth) has been widely used. In this model cells exposed to doses below Dth survive while at doses above the Dth necrosis takes place. Objective: This study evaluated the light Dth values by using two different methods of determination. One model concerns the depth of necrosis and the other the width of superficial necrosis. Materials and Methods: Using normal rat liver we investigated the depth and width of necrosis induced by PDT when a laser with a gaussian intensity profile is used. Different light doses, photosensitizers (Photogem, Photofrin, Photosan, Foscan, Photodithazine, and Radachlorin), and concentrations were employed. Each experiment was performed on five animals and the average and standard deviations were calculated. Results: A simple depth and width of necrosis model analysis allows us to determine the threshold dose by measuring both depth and surface data. Comparison shows that both measurements provide the same value within the degree of experimental error. Conclusion: This work demonstrates that by knowing the extent of the superficial necrotic area of a target tissue irradiated by a gaussian light beam, it is possible to estimate the threshold dose. This technique may find application where the determination of Dth must be done without cutting the tissue.

Recoleta uterina como estratégia para aumentar a taxa de embriões em fêmeas bovinas de corte e leite

Embryo recovery rate in superovulated cows after uterine flushing is lower than the ovulation rate, which contributes to the relative inefficiency of the conventional cervical recovery procedure. A simple and easy alternative to improve embryo recovery rate is the uterine re-flushing procedure. To evaluate the effect of re-flushing and the influence of breed and operator on bovine embryo recovery rate, 38 Nelore and 19 Jersey females were stimulated using FSH, with embryos being collected by one of two trained operators. At the end of flushing, the catheter was sealed and maintained into the uterine body, filled with flushing medium, while females were released to a paddock for 30 to 50 min, to be submitted to the re-flushing procedure by the same operator. A total of 599 structures were recovered out of 57 procedures, from which 423 (70.6%) were obtained in the first flushing and 176 (29.4%) after re-flushing. Mean recovery rates of 7.4 and 3.1 structures were obtained after the first and second flushing, respectively, for a total of 10.5 structures per cow. Structures were obtained in 73.6% ( 42 out of 57) of the re-flushing procedures. No breed effect was observed on total ova or embryo recovery, with 10.9 total ova collected from Jersey and 10.3 from Nelore females. Likewise, the embryo recovery rate obtained following uterine flushing or re-flushing did not differ either between Jersey (8.1 and 2.7) and Nelore (7.0 and 3.2) animals, or between operators A (7.5 and 3.3) and B (7.3 and 2.9), respectively. In conclusion, the uterine re-flushing procedure significantly increased the rate of embryo recovery in Jersey and Nelore females, with no operator influence being observed.

Ablation Rate and Morphology of Superficial and Deep Dentin Irradiated with Different Er:YAG Laser Energy Levels

Objective: In this study we evaluated the ablation rate of superficial and deep dentin irradiated with different Er:YAG laser energy levels, and observed the micromorphological aspects of the lased substrates with a scanning electron microscope (SEM). Background Data: Little is known about the effect of Er: YAG laser irradiation on different dentin depths. Materials and Methods: Sixty molar crowns were bisected, providing 120 specimens, which were randomly assigned into two groups ( superficial or deep dentin), and later into five subgroups (160, 200, 260, 300, or 360 mJ). Initial masses of the specimens were obtained. After laser irradiation, the final masses were obtained and mass losses were calculated followed by the preparation of specimens for SEM examination. Mass-loss values were subjected to two-way ANOVA and Fisher's least significant difference multiple-comparison tests (p < 0.05). Results: There was no difference between superficial and deep dentin. A significant and gradual increase in the mass-loss values was reached when energies were raised, regardless of the dentin depth. The energy level of 360 mJ showed the highest values and was statistically significantly different from the other energy levels. The SEM images showed that deep dentin was more selectively ablated, especially intertubular dentin, promoting tubule protrusion. At 360 mJ the micromorphological features were similar for both dentin depths. Conclusion: The ablation rate did not depend on the depth of the dentin, and an energy level lower than 360 mJ is recommended to ablate both superficial and deep dentin effectively without causing tissue damage.

The synergism between high superficial roughness and corrosive atmosphere in the fatigue behavior of the SAE 1045 steel

The fatigue behavior of the SAE 1045 steel in four different conditions is reported in this paper. Four treatments were tested: polished surface, corrosive atmosphere (sugar cane juice), low quality roughness (typical equivalent surface of the shaft cane mill) and the combined condition of the two last treatments involved. Fatigue tests were performed in rotating bending conditions and the values of fatigue strength for the different situations from tests were obtained. The diminution in fatigue strength for the synergy condition of rough surface and corrosive atmosphere was of 8.7%, result statistically representative with less than 0.01% of uncertainty.

Altered inhibitory synaptic transmission in superficial dorsal horn neurones in spastic and oscillator mice

The spastic (spa) and oscillator (ot) mouse have naturally occurring mutations in the inhibitory glycine receptor (GlyR) and exhibit severe motor disturbances when exposed to unexpected sensory stimuli. We examined the effects of the spa and ot mutations on GlyR- and GABA(A)R-mediated synaptic transmission in the superficial dorsal horn (SFDH), a spinal cord region where inhibition is important for nociceptive processing. Spontaneous mIPSCs were recorded from visually identified neurones in parasagittal spinal cord slices. Neurones received exclusively GABA(A)R-mediated mIPSCs, exclusively GlyR-mediated mIPSCs or both types of mIPSCs. In control mice (wild-type and spa/+) over 40 % of neurones received both types of mIPSCs, over 30 % received solely GABA(A)R-mediated mIPSCs and the remainder received solely GlyR-mediated mIPSCs. In spa/spa animals, 97 % of the neurones received exclusively GABA(A)ergic or both types of mIPSCs. In ot/ot animals, over 80 % of the neurones received exclusively GABA(A)R-mediated mIPSCs. GlyR-mediated mIPSC amplitude and charge were reduced in spa/spa and ot/ot animals. GABA,Rmediated mIPSC amplitude and charge were elevated in spa/spa but unaltered in ot/ot animals. GlyR- and GABA(A)R-mediated mIPSC decay times were similar for all genotypes, consistent with the mutations altering receptor numbers but not kinetics. These findings suggest the spastic and oscillator mutations, traditionally considered motor disturbances, also disrupt inhibition in a sensory region associated with nociceptive transmission. Furthermore, the spastic mutation results in a compensatory increase in GABA(A)ergic transmission in SFDH neurones, a form of inhibitory synaptic plasticity absent in the oscillator mouse.

Microvascular Lymphatic Density Analysis in Cutaneous Regressive and Nonregressive Superficial Spreading Melanomas Using the Lymphatic Marker D2-40

Background: The prognostic significance of spontaneous regression in melanoma, especially thin lesions, has been a controversial issue for the past 20 years, although recent studies suggest that extensive and late regression may be related to worse prognosis. Many data suggest that lymphangiogenesis predicts metastatic spread in melanoma. Methods: We have quantified lymphatic microvascular density (LMVD) in thin (<= 1.0 mm) superficial spreading melanomas comparing regressive and nonregressive melanomas, regressive and nonregressive areas from the same tumor, and early and late histological stages of regression in the same tumor. In addition, we tried to correlate lymphangiogenesis and tumor growth phase. We conducted histological examinations and immunohistochemical analyses using monoclonal antibody D2-40 with subsequent quantification by image analysis of 37 melanomas, 16 regressive and 21 nonregressive (controls). Results: We found higher LMVD in the late stage of regression compared with nonregressive area (internal control) of regressive melanomas. Conclusions: Our study suggest that the late stage of spontaneous regression in thin melanomas may be related to worse prognosis as it showed higher LMVD, and evidence shows that this is related with increased risk of metastatic spread. But this supposition must be confirmed by a longer follow-up for detection of lymph node metastases.

Processing Speed and Working Memory Span: Their Differential Role in Superficial and Deep Memory Processes in Schizophrenia

Previous work has suggested that decrement in both processing speed and working memory span plays a role in the memory impairment observed in patients with schizophrenia. We undertook a study to examine simultaneously the effect of these two factors. A sample of 49 patients with schizophrenia and 43 healthy controls underwent a battery of verbal and visual memory tasks. Superficial and deep encoding memory measures were tallied. We conducted regression analyses on the various memory measures, using processing speed and working memory span as independent variables. In the patient group, processing speed was a significant predictor of superficial and deep memory measures in verbal and visual memory. Working memory span was an additional significant predictor of the deep memory measures only. Regression analyses involving all participants revealed that the effect of diagnosis on all the deep encoding memory measures was reduced to non-significance when processing speed was entered in the regression. Decreased processing speed is involved in verbal and visual memory deficit in patients, whether the task require superficial or deep encoding. Working memory is involved only insofar as the task requires a certain amount of effort. (JINS, 2011, 17, 485-493)

Effect of erbium:yttrium-aluminum-garnet laser energies on superficial and deep dentin microhardness

This study evaluated the microhardness of superficial and deep dentin irradiated with different erbium:yttrium-aluminum-garnet (Er:YAG) laser energies. Seventy-two molars were bisected and randomly assigned to two groups (superficial dentin or deep dentin) and into six subgroups (160 mJ, 200 mJ, 260 mJ, 300 mJ, 360 mJ, and control). After irradiation, the cavities were longitudinally bisected. Microhardness was measured at six points (20 A mu m, 40 A mu m, 60 A mu m, 80 A mu m, 100 A mu m, and 200 A mu m) under the cavity floor. Data were submitted to analysis of variance (ANOVA) and Fisher`s tests (alpha = 0.05). Superficial dentin presented higher microhardness than deep dentin; energy of 160 mJ resulted in the highest microhardness and 360 mJ the lowest one. Values at all points were different, exhibiting increasing microhardness throughout; superficial dentin microhardness was the highest at 20 A mu m with 160 mJ energy; for deep dentin, microhardness after irradiation at 160 mJ and 200 mJ was similar to that of the control. The lowest energy increased superficial dentin microhardness at the closest extent under the cavity; deep dentin microhardness was not altered by energies of 160 mJ and 200 mJ.

Deep and superficial fibers of the lumbar multifidus muscle are differentially active during voluntary arm movements

AB Study Design. A cross-sectional study was conducted. Objective. To determine the activity of the deep and superficial fibers of the lumbar multifidus during voluntary movement of the arm. Summary of Background Data. The multifidus contributes to stability of the lumbar spine. Because the deep and superficial parts of the multifidus are near the center of lumbar joint rotation, the superficial fibers are well suited to control spine orientation, and the deep fibers to control intervertebral movement. However, there currently are limited in vivo data to support this distinction. Methods. Electromyographic activity was recorded in both the deep and superficial multifidus, transversus abdominis, erector spinae, and deltoid using selective intramuscular electrodes and surface electrodes during single and repetitive arm movements. The latency of electromyographic onset in each muscle during single movements and the pattern of electromyographic activity during repetitive movements were compared between muscles. Results. With single arm movements, the onset of electromyography in the erector spinae and superficial multifidus relative to the deltoid was dependent on the direction of movement, but the onset in the deep multifidus and transversus abdominis was not. With repetitive arm movements, peaks in superficial multifidus and erector spinae electromyography occurred only during flexion for most subjects, whereas peaks in deep multifidus electromyography occurred during movement in both directions. Conclusions. The deep and superficial fibers of the multifidus are differentially active during single and repetitive movements of the arm. The data from this study support the hypothesis that the superficial multifidus contributes to the control of spine orientation, and that the deep multifidus has a role in controlling intersegmental motion. (C) 2002 Lippincott Williams & Wilkins, Inc.

Preparação e caracterização de carvão ativado quimicamente a partir da casca de arroz

This work consists in a study about the chemical activation of charred rice hulls using NaOH as the activation agent. The influence of the naturally-occurring silica was particularly evidenced. X-ray diffraction patterns showed the formation of sodium carbonate and silicates in the activated samples, whereas thermogravimetric curves revealed a strong reduction in the ash content of these samples after washing with water. Nitrogen adsorption data indicated a microporosity development only in the washed samples, with BET surface area values of 450 and 1380 m2/g achieved for the samples activated at 800 °C starting from the precursor with or without silica, respectively.