The effect of care solutions on the bulk and surface properties of soft contact lenses

Purpose: Soft contact lenses for continuous wear require the use of cleaning regimes which utilise hydrogen peroxide systems or multipurpose cleaning solutions (MPS). The compositions of MPS are becoming increasingly complex and often include disinfectants, cleaning agents, preservatives, wetting agents, demulcents, chelating and buffering agents. Recent research on solution–lens interactions has focused on specific ocular parameters such as corneal staining. However the effect of a solution on the lens, particularly silicone hydrogel lenses, itself has received less attention. The purpose of this work was to establish and understand the effects that care solutions have on selected bulk and surface material properties. Methods: Selected bulk and surface properties of each material (etafilcon A, vifilcon A, balafilcon A, senofilcon A, lotrafilcon A and lotrafilcon B, galyfilcon A) were measured after a 24 h soak in a variety of care solutions. Additionally the lenses were soaked for 24 h in hyperosmolar (680 mOsm L-1) and hyposmolar (170 mOsm L-1) PBS. A bulk property parameter the total diameter (TD) was measured using an Optimec contact lens analyser. The surface property related CoF of soaked lenses was measured on a nano-tribometer with conditions of load 30 mN, at a distance of 20 mm and speed 30 mm/min. Results: In terms of bulk properties, change is related to the EWC of the lens, the higher the EWC of the lens the greater the TD changes. Silicone hydrogel lenses have EWCs of <47% and little or no TD changes were observed; lotrafilcon A exhibited no change irrespective of the cleaning solution. Conventional contact lenses have higher EWCs (58% for etafilcon A and 55% for vifilcon A) and the TD was seen to change to a greater extent, for example the etafilcon A material in ReNu MPS had an increase to 14.45± 0.07 mm from the cited 14.2 mm. Other lenses increased or decreased in TD depending on the solution used. The osmolarity of the solution although important is not the only factor governing change in the TD, for example soaking senofilcon A in hyperosmolar PBS (680 mOsm L-1) for 24 h increased the TD of the lens (+0.25 ± 0.07 mm), however when the same lens type was soaked for 24 h in a MPS with a lower osmolarity there was a similar effect. Biotribology measurements demonstrated that some solution–lens combinations can reduce the CoF by 55%, when compared with biotribology with the native packing solution. An increase in the CoF was observed for other solution–lens combinations. Conclusions: There is a dramatic difference in bulk and surface performance of specific lens materials with particular care solutions. Individual components of the care solutions have effects on the bulk and surface properties of contact lenses. The affects are not as great with the silicone hydrogel as compared with conventional hydrogels.

The move to servitization (from a product service system point of view)

Product Service Systems (PSSs) emphasize the substitution of products with services. The term “Servitisation” was introduced by Sandra Vendermerwe in the 80s to represent the addition of services to increase a company’s competitive edge. Key to PSS, and Servitisation more generally, is the “informated product”. The informated product enables health monitoring of the product in use and can be key to a workable PSS. This paper reviews the evolution of servitisation and the associated business benefit. It also then reviews the concept of informated product reconfiguration techniques and remote services that enables PSS to be delivered.

Integration of a 3D hydrogel matrix within a hollow core photonic crystal fibre for DNA probe immobilization

In this paper, we demonstrate the integration of a 3D hydrogel matrix within a hollow core photonic crystal fibre (HC-PCF). In addition, we also show the fluorescence of Cy5-labelled DNA molecules immobilized within the hydrogel formed in two different types of HC-PCF. The 3D hydrogel matrix is designed to bind with the amino groups of biomolecules using an appropriate cross-linker, providing higher sensitivity and selectivity than the standard 2D coverage, enabling a greater number of probe molecules to be available per unit area. The HC-PCFs, on the other hand, can be designed to maximize the capture of fluorescence to improve sensitivity and provide longer interaction lengths. This could enable the development of fibre-based point-of-care and remote systems, where the enhanced sensitivity would relax the constraints placed on sources and detectors. In this paper, we will discuss the formation of such polyethylene glycol diacrylate (PEGDA) hydrogels within a HC-PCF, including their optical properties such as light propagation and auto-fluorescence.

An analysis of the role of soft systems methodology in the change process and the contribution of the facilitator within this process

This research aims to examine the effectiveness of Soft Systems Methodology (SSM) to enable systemic change within local goverment and local NHS environments and to examine the role of the facilitator within this process. Checkland's Mode 2 variant of Soft Systems Methodology was applied on an experimental basis in two environments, Herefordshire Health Authority and Sand well Health Authority. The Herefordshire application used SSM in the design of an Integrated Care Pathway for stroke patients. In Sandwell, SSM was deployed to assist in the design of an Infonnation Management and Technology (IM&T) Strategy for the boundary-spanning Sandwell Partnership. Both of these environments were experiencing significant organisational change as the experiments unfurled. The explicit objectives of the research were: To examine the evolution and development of SSM and to contribute to its further development. To apply the Soft Systems Methodology to change processes within the NHS. To evaluate the potential role of SSM in this wider process of change. To assess the role of the researcher as a facilitator within this process. To develop a critical framework through which the impact of SSM on change might be understood and assessed. In developing these objectives, it became apparent that there was a gap in knowledge relating to SSM. This gap concerns the evaluation of the role of the approach in the change process. The case studies highlighted issues in stakeholder selection and management; the communicative assumptions in SSM; the ambiguous role of the facilitator; and the impact of highly politicised problem environments on the effectiveness of the methodology in the process of change. An augmented variant on SSM that integrates an appropriate (social constructivist) evaluation method is outlined, together with a series of hypotheses about the operationalisation of this proposed method.

Solutions of Analytical Systems of Partial Differential Equations

In this paper are examined some classes of linear and non-linear analytical systems of partial differential equations. Compatibility conditions are found and if they are satisfied, the solutions are given as functional series in a neighborhood of a given point (x = 0).

Synthesis Methods of Multiple-valued Structures of Language Systems

The basic construction concepts of many-valued intellectual systems, which are adequate to primal problems of person activity and using hybrid tools with many-valued of coding are considered. The many-valued intellectual systems being two-place, but simulating neuron processes of space toting which are different on a level of actions, inertial and threshold of properties of neurons diaphragms, and also modification of frequency of following of the transmitted messages are created. All enumerated properties and functions in point of fact are essential not only are discrete on time, but also many-valued.

Multiple-Valued Structures of Intellectual Systems

The basic construction concepts of many-valued intellectual systems, which are adequate to primal problems of person activity and using hybrid tools with many-valued intellectual systems being two-place, but simulating neuron processes of space toting which are different on a level of actions, inertial and threshold of properties of neuron diaphragms, and also frequency modification of the following transmitted messages are created. All enumerated properties and functions in point of fact are essential not only are discrete on time, but also many-valued.

A lean termelési rendszer munkásokra gyakorolt hatása (Effects of lean production on quality of working life from workers’ point of view)

A lean termelési rendszer munkásokra gyakorolt hatásaival foglalkozó irodalomban nincsen egyetértés annak megítélésében, hogy a hatásokban a negatív vagy pozitív hatások dominálnak-e. A szerző tanulmánya ehhez a vitához a pszichológiai, egészségügyi, munkahelyi jellemzőkre és a dolgozói elégedettségre vonatkozó eredmények áttekintésével kapcsolódik. A munkások elégedettségének vizsgálata arra utal, hogy a lean termelési rendszer egyszerre növeli és csökkenti is az elégedettséget, így az összességében nem változik más termelési rendszerekhez képest. A lean termelés kritikusai azt hangsúlyozzák, hogy a többi tényező negatívan hat a munkásokra. Megállapításaik megalapozottsága a nagyon kevés empirikus munka miatt megkérdőjelezhető. Ugyanakkor a tevékenységmenedzsment kutatói érdemben nem tudják cáfolni a stressz, a sérülések és betegségek kockázatának növekedését és a munka intenzívebbé válását. A negatív hatások és a várt pozitív hatások hiányának kiemelése felveti, hogy a munkavállalók bevonásán alapuló lean termelési rendszer nehezen ültethető át a gyakorlatba, illetve hogy a lean termelés intenzifikáción alapuló modellje is elterjedt. _____________ This literature review contributes to the debate related to the effects of lean production on workers. The study reviews different dimensions of the debate and focuses on issues like worker’s satisfaction, psychological effects, health and safety aspects, and workplace characteristics. Findings of researches reviewed in this paper cannot confirm that from workers’ point of view lean production is better than other production initiatives. Lean production enhances and decreases worker’s satisfaction at the same time, altogether, the satisfaction of workers does not change significantly compared to other systems. The negative impact of the other factors (psychological etc.) on workers is usually emphasized in the critique of lean production. Although, the limited number of (empirical) studies doubts these critical voices. However, Operations Management can not reject negative effects like increasing level of stress, increased risks of health and safety problems or intensification of work. The emphasis of the negative effects and the lack of positive effects can refer to the difficult employment of lean involvement system, or simply reflect that the model of lean intensification system is widely spread.

Design, analysis and evaluation of sigma-delta based beamformers for medical ultrasound imaging applications

The inherent analogue nature of medical ultrasound signals in conjunction with the abundant merits provided by digital image acquisition, together with the increasing use of relatively simple front-end circuitries, have created considerable demand for single-bit  beamformers in digital ultrasound imaging systems. Furthermore, the increasing need to design lightweight ultrasound systems with low power consumption and low noise, provide ample justification for development and innovation in the use of single-bit  beamformers in ultrasound imaging systems. The overall aim of this research program is to investigate, establish, develop and confirm through a combination of theoretical analysis and detailed simulations, that utilize raw phantom data sets, suitable techniques for the design of simple-to-implement hardware efficient  digital ultrasound beamformers to address the requirements for 3D scanners with large channel counts, as well as portable and lightweight ultrasound scanners for point-of-care applications and intravascular imaging systems. In addition, the stability boundaries of higher-order High-Pass (HP) and Band-Pass (BP) Σ−Δ modulators for single- and dual- sinusoidal inputs are determined using quasi-linear modeling together with the describing-function method, to more accurately model the  modulator quantizer. The theoretical results are shown to be in good agreement with the simulation results for a variety of input amplitudes, bandwidths, and modulator orders. The proposed mathematical models of the quantizer will immensely help speed up the design of higher order HP and BP Σ−Δ modulators to be applicable for digital ultrasound beamformers. Finally, a user friendly design and performance evaluation tool for LP, BP and HP  modulators is developed. This toolbox, which uses various design methodologies and covers an assortment of  modulators topologies, is intended to accelerate the design process and evaluation of  modulators. This design tool is further developed to enable the design, analysis and evaluation of  beamformer structures including the noise analyses of the final B-scan images. Thus, this tool will allow researchers and practitioners to design and verify different reconstruction filters and analyze the results directly on the B-scan ultrasound images thereby saving considerable time and effort.

GPs’ and community pharmacists’ opinions on medication management at transitions of care in Ireland

Objective. The aim of this study was to survey GPs and community pharmacists (CPs) in Ireland regarding current practices of medication management, specifically medication reconciliation, communication between health care providers and medication errors as patients transition in care.
Methods. A national cross-sectional survey was distributed electronically to 2364 GPs, 311 GP Registrars and 2382 CPs. Multivariable associations comparing GPs to CPs were generated and content analysis of free text responses was undertaken.
Results. There was an overall response rate of 17.7% (897 respondents—554 GPs/Registrars and 343 CPs). More than 90% of GPs and CPs were positive about the effects of medication reconciliation on medication safety and adherence. Sixty per cent of GPs reported having no formal system of medication reconciliation. Communication between GPs and CPs was identified as good/very good by >90% of GPs and CPs. The majority (>80%) of both groups could clearly recall prescribing errors, following a transition of care, they had witnessed in the previous 6 months. Free text content analysis corroborated the positive relationship between GPs and CPs, a frustration with secondary care communication, with many examples given of prescribing errors.
Conclusions. While there is enthusiasm for the benefits of medication reconciliation there are limited formal structures in primary care to support it. Challenges in relation to systems that support inter-professional communication and reduce medication errors are features of the primary/secondary care transition. There is a need for an improved medication management system. Future research should focus on the identified barriers in implementing medication reconciliation and systems that can improve it.

Diagnostic Tests and their Application in the Management of Soil- and Water-borne Oomycete Pathogen Species

Oomycete diseases cause significant losses across a broad range of crop and aquaculture commodities worldwide. These losses can be greatly reduced by disease management practices steered by accurate and early diagnoses of pathogen presence. Determinations of disease potential can help guide optimal crop rotation regimes, varietal selections, targeted control measures, harvest timings and crop post-harvest handling. Pathogen detection prior to infection can also reduce the incidence of disease epidemics. Classical methods for the isolation of oomycete pathogens are normally deployed only after disease symptom appearance. These processes are often-time consuming, relying on culturing the putative pathogen(s) and the availability of expert taxonomic skills for accurate identification; a situation that frequently results in either delayed application, or routine ‘blanket’ over-application of control measures. Increasing concerns about pesticides in the environment and the food chain, removal or restriction of their usage combined with rising costs have focussed interest in the development and improvement of disease management systems. To be effective, these require timely, accurate and preferably quantitatve diagnoses. A wide range of rapid diagnostic tools, from point of care immunodiagnostic kits to next generation nucleotide sequencing have potential application in oomycete disease management. Here we review currently-available as well as promising new technologies in the context of commercial agricultural production systems, considering the impacts of specific biotic and abiotic and other important factors such as speed and ease of access to information and cost effectiveness

IDEATIONAL REPRESENTATIONS OF EDENTULISM AND PROSTHETIC REHABILITATION FROM THE POINT OF VIEW OF THE ELDERLY

Objetivo: Identificar as representações ideativas de idosos edêntulos uni ou bimaxilares acerca das perdas dentárias e da reabilitação protética oral. Métodos: Estudo qualitativo, realizado entre janeiro e março de 2011 com sete idosos residentes em uma Instituição Pública de Longa Permanência do Recife-PE, com 14 idosos em atendimento na Clínica de Prótese Dentária da Universidade Federal de Pernambuco (UFPE). Coletaram-se os dados através de uma entrevista semiestruturada que passou por análise de conteúdo. Resultados: Os achados possibilitaram identificar que, para os idosos, os dentes contribuíam tanto para a saúde quanto como para facilitar interações sociais, enquanto o edentulismo foi associado a uma pluralidade de sentimentos negativos. Quanto à reabilitação protética, eles enfatizaram os prejuízos para a saúde devido a próteses mal adaptadas. Conclusão: Os idosos acreditam que o edentulismo e a reabilitação protética estão associados, principalmente, a um conceito mecanicista da profissão, amplamente difundido entre os profissionais que privilegiam mais a odontologia curativa em detrimento da prevenção. Nesse contexto, para que o envelhecimento possa ser considerado uma etapa da vida com as mesmas qualidades e dificuldades de qualquer outra, sugere-se aos gestores e aos próprios profissionais em saúde que se comprometam mais com uma prática odontológica humanizadora e preventiva, a fim de proverem os requisitos mínimos para um envelhecimento com dignidade.

Provision of care services for rheumatic and musculoskeletal diseases-related foot and ankle problems: a survey from sixteen european countries

Background: The increased prevalence of foot and ankle pathologies in Rheumatic and Musculoskeletal diseases (RMDs) is well documented1, however the provision of foot & ankle (F&A) healthcare services for people with RMDs in Europe has not been evaluated. Objectives: To assess the current healthcare systems for providing foot & ankle healthcare services for people with RMDs in Europe. Methods: A survey was undertaken to evaluate current provision of F&A health care services for people with RMDs across Europe. A questionnaire was distributed to all 22 country presidents representing HP associations within EULAR. The questionnaire used was developed and piloted (in 7 countries) by the EULAR F&A Study Group, and structured to capture the provision and type of F&A services for people with RMDs. When the HP presidents felt unable to answer specific questions they were encouraged to consult a colleague who may be better placed to provide the answers. Results: Sixteen questionnaires were completed (Norway, Ireland, Sweden, Hungary, Netherlands, UK, Denmark, Portugal, Italy, Switzerland, Austria, France, Czech Republic, Spain, Belgium, Malta). Of the 16, 13 respondents indicated provision of F&A health care services in their country, but only three countries had services specialising in RMD-related F&A problems (Netherlands, UK, Malta). The professions providing the care for patients with RMD-related F&A problems were different depending on the pathology and the country (Table1). Podiatrists provided care for F&A pain and deformity problems in 11 countries, but provided F&A ulcer care in only 8 countriesConclusions: Only 3 countries have F&A health care services specialised to the needs of people with RMDs. The professions providing the care varied between countries, and also depended on the F&A pathology. Interestingly, F&A healthcare services were provided by professions that do not solely specialised in F&A care. Further research is needed to assess the variation of F&A healthcare services between and within European countries and the impact on healthcare of various F&A healthcare service designs. References: Woodburn, J. & Helliwell, P. Foot problems in rheumatology. Rheumatology 36, 932-934 (1997).

Point of View: The importance of Leadership towards universal health coverage in Low Income Countries

Universal health coverage—defined as access to the full range of the most appropriate health care and technology for all people at the lowest possible price or with social health protection—was the goal of the 1978 Alma-Ata Conference on Primary Health Care in Kazakhstan. Many low-income (developing) countries are currently unable to reach this goal despite having articulated the same in their health-related documents. In this paper we argue that, over 30 years on, inadequate political and technical leadership has prevented the realization of universal health coverage in low-income countries.

Dentine Bond Strength And Antimicrobial Activity Evaluation Of Adhesive Systems.

This study evaluated the dentine bond strength (BS) and the antibacterial activity (AA) of six adhesives against strict anaerobic and facultative bacteria. Three adhesives containing antibacterial components (Gluma 2Bond (glutaraldehyde)/G2B, Clearfil SE Protect (MDPB)/CSP and Peak Universal Bond (PUB)/chlorhexidine) and the same adhesive versions without antibacterial agents (Gluma Comfort Bond/GCB, Clearfil SE Bond/CSB and Peak LC Bond/PLB) were tested. The AA of adhesives and control groups was evaluated by direct contact method against four strict anaerobic and four facultative bacteria. After incubation, according to the appropriate periods of time for each microorganism, the time to kill microorganisms was measured. For BS, the adhesives were applied according to manufacturers' recommendations and teeth restored with composite. Teeth (n=10) were sectioned to obtain bonded beams specimens, which were tested after artificial saliva storage for one week and one year. BS data were analyzed using two-way ANOVA and Tukey test. Saliva storage for one year reduces the BS only for GCB. In general G2B and GCB required at least 24h for killing microorganisms. PUB and PLB killed only strict anaerobic microorganisms after 24h. For CSP the average time to eliminate the Streptococcus mutans and strict anaerobic oral pathogens was 30min. CSB showed no AA against facultative bacteria, but had AA against some strict anaerobic microorganisms. Storage time had no effect on the BS for most of the adhesives. The time required to kill bacteria depended on the type of adhesive and never was less than 10min. Most of the adhesives showed stable bond strength after one year and the Clearfil SE Protect may be a good alternative in restorative procedures performed on dentine, considering its adequate bond strength and better antibacterial activity.