The knowledge and use of critical thinking teaching strategies of faculty in associate degree nursing education programs

The purpose of this study was to determine the knowledge and use of critical thinking teaching strategies by full-time and part-time faculty in Associate Degree Nursing (ADN) programs. Sander's CTI (1992) instrument was adapted for this study and pilottested prior to the general administration to ADN faculty in Southeast Florida. This modified instrument, now termed the Burroughs Teaching Strategy Inventory (BTSI), returned reliability estimates (Cronbach alphas of .71, .74, and .82 for the three constructs) comparable to the original instrument. The BTSI was administered to 113 full-time and part-time nursing faculty in three community college nursing programs. The response rate was 92% for full-time faculty (n = 58) and 61 % for part-time faculty (n = 55). The majority of participants supported a combined definition of critical thinking in nursing which represented a composite of thinking skills that included reflective thinking, assessing alternative viewpoints, and the use of problem-solving. Full-time and part-time faculty used different teaching strategies. Fulltime faculty most often used multiple-choice exams and lecture while part-time faculty most frequently used discussion within their classes. One possible explanation for specific strategy choices and differences might be that full-time faculty taught predominately in theory classes where certain strategies would be more appropriate and part-time faculty taught predominately clinical classes. Both faculty types selected written nursing care plans as the second most effective critical thinking strategy. Faculty identified several strategies as being effective in teaching critical thinking. These strategies included discussion, case studies, higher order questioning, and concept analysis. These however, were not always the strategies that were used in either the classroom or clinical setting. Based on this study, the author recommends that if the profession continues to stress critical thinking as a vital component of practice, nursing faculty should receive education in appropriate critical teaching strategies. Both in-service seminars and workshops could be used to further the knowledge and use of critical thinking strategies by faculty. Qualitative research should be done to determine why nursing faculty use self-selected teaching strategies.

Female employment from the household. Towards a comprehensive analysis of work-life articulation

Research on women’s employment has proliferated over recent decades, often under a perspective that conceptualizes female labour market activity as independent of male presences and absences in the productive and reproductive spheres. In the face of these approaches, the article argues the need to focus on the couple as the unit of analysis of work-life articulation. After referring to the main theoretical arguments that, from a gender perspective within labour studies, have pointed out the relevance of placing the household as the central space for the analysis of the sexual division of labour, the article reviews different empirical contributions that have incorporated such perspective in the international literature. Next, the state of the art in the Spanish literature is presented, before arguing the desirability of applying such framework of analysis to the study of employment and care work in Spanish households, which are at present undergoing major transformations.

Incertidumbre y actitudes pro-redistributivas: mercados de trabajo y modelos de bienestar en Europa

La articulación entre las políticas de empleo y las políticas sociales condicionan la percepción subjetiva de incertidumbre los individuos. El modelo de mercado laboral tiene un peso determinante en la percepción de incertidumbre. El empleo en sí mismo ya no es suficiente garantía de ingresos seguros. El empleo a tiempo parcial y los contratos temporales generan una creciente demanda de políticas de redistribución de los ingresos en los países del Sur y Este de Europa. En los países escandinavos los mismos tipos de contratos laborales generan menos desigualdad porque el empleo público contribuye a generar un “círculo virtuoso” que favorece las políticas de igualdad y la conciliación entre la vida laboral y familiar. A nivel individual las actitudes pro-redistributivas las impulsan las mujeres, aquellas personas con incertidumbre en sus ingresos económicos y con bajo nivel de estudios. Por el contrario, quienes más confían en el éxito individual y el mérito son los jóvenes con estudios universitarios y aquellos que perciben ingresos económicos altos.

Catalytic reactions with palladium supported on mesocellular foam : Applications in hydrogenation, isomerization, and C-C bond forming reactions

The major part of this thesis concerns the development of catalytic methodologies based on palladium nanoparticles immobilized on aminopropyl-functionalized siliceous mesocellular foam (Pd0-AmP-MCF). The catalytic activity of the precursor to the nanocatalyst, PdII-AmP-MCF is also covered by this work. In the first part the application of Pd0-AmP-MCF in Suzuki-Miyaura cross-coupling reactions and transfer hydrogenation of alkenes under microwave irradiation is described. Excellent reactivity was observed and a broad range of substrates were tolerated for both transformations. The Pd0-AmP-MCF exhibited high recyclability as well as low metal leaching in both cases. The aim of the second part was to evaluate the catalytic efficiency of the closely related PdII-AmP-MCF for cycloisomerization of various acetylenic acids. The catalyst was able to promote formation of lactones under mild conditions using catalyst loadings of 0.3 - 0.5 mol% at temperatures of up to 50 oC in the presence of Et3N. By adding 1,4-benzoquinone to the reaction, the catalyst could be recycled four times without any observable decrease in the activity. The selective arylation of indoles at the C-2 position using Pd-AmP-MCF and symmetric diaryliodonium salts is presented in the third part. These studies revealed that Pd0-AmP-MCF was more effective than PdII-AmP-MCF for this transformation. Variously substituted indoles as well as diaryliodonium salts were tolerated, giving arylated indoles in high yields within 15 h at 20 - 50 oC in H2O. Only very small amounts of Pd leaching were observed and in this case the catalyst exhibited moderate recyclability. The final part of the thesis describes the selective hydrogenation of the C=C in different α,β-unsaturated systems. The double bond was efficiently hydrogenated in high yields both under batch and continuous-flow conditions. High recyclability and low metal leaching were observed in both cases.

The Importance of Work-Life Balance Opportunities and Support from the Perspective of Nursing Stu-dents in Dalarna, Sweden

There is a shortage of nurses leading to challenges in recruitment in Sweden and many other countries. Especially for less populated regions recruitment can be chal-lenging. Nurses often face difficulties with work-life balance (WLB). This study aims to identify the importance of WLB opportunities and support that make a work-place attractive from the perspective of nursing students studying in Dalarna. A questionnaire was distributed via email to 525 students enrolled in the nursing bach-elor program at Dalarna University. They were asked to rate the importance of 15 sub questions regarding WLB opportunities and support. These sub questions were asked in order to analyze the importance of 15 components regarding WLB oppor-tunities and support. 196 students (37 percent) answered the questionnaire. Three WLB components, working from home, childcare and rooms for breastfeeding, were found to be not important to nursing students studying in Dalarna. This was reason-able due to the profession of nursing and the WLB support provided by the Swedish government. Cultural factors, such as the organization being positive towards using WLB opportunities and support, were more important than structural factors, such as the possibility to work part-time. Moreover, to have a manager that is supportive towards using WLB opportunities and support was found to be the most important factor and having workplace practical support such as childcare was found least im-portant. Furthermore, contrary to the expected results, no statistical significance was found on the influence on the importance of all combined relevant WLB opportuni-ties and support by the sociodemographic variables; gender, semester of studies, age, having children, months of work experience and work experience in the healthcare sector. However, nine individual components were found to be influ-enced by one or more sociodemographic variables. Therefore, some recommenda-tions on how to target specific groups of individuals were made. However, the con-clusion of the study is that, regardless of the sociodemographic variables and gov-ernmental support, organizations should offer new nurses opportunities and support to gain a balance between work and life, especially in terms of cultural factors.

Changing family models in Spain: the impact of the sociodemographic factors

Abstract During the last few decades, there has been an increasing international recognition of the studies related to the analysis of the family models change, the focus being the determinants of the female employment and the problems related to the work family balance (Lewis, 2001; Petit & Hook, 2005Saraceno, Crompton & Lyonette, 20062008; Pfau-Effinger, 2012). The majority of these studies have been focused on the analysis of the work-family balance problems as well as the effectiveness of the family and gender policies in order to encourage female employment (Korpi et al., 2013). In Spain, special attention has been given to the family policies implemented, the employability of women and on the role of the father in the family (Flaquer et al., 2015; Meil, 2015); however, there has been far less emphasis on the analysis of the family cultural models (González and Jurado, 2012; Crespi and Moreno, 2016). The purpose of this paper is to present some of the first results on the influence of the socio-demographic factors on the expectations and attitudes about the family models. This study offers an analytical reflection upon the foundation of the determinants of the family ambivalence in Spain from the cultural and the institutional dimension. This study shows the Spanish family models of preferences following the Pfau-Effinger (2004) classification of the famiy living arrangements. The reason for this study is twofold; on the one hand, there is confirmed the scarcity of studies that have focused their attention on this objective in Spain; on the other hand, the studies carried out in the international context have confirmed the analytical effectiveness of researching on the attitude and value changes to explain the meaning and trends of the family changes. There is also presented some preliminary results that have been obtained from the multinomial analysis related to the influence of the socio-demographic factors on the family model chosen by the individuals in Spain (father and mother working full time; mother part-time father full-time; mother not at work father full-time; mother and father part-time). 3 The database used has been the International Social Survey Programme: Family and Changing Gender Roles IV- ISSP 2012-. Spain is the only country of South Europe that has participated in the survey. For this reason it has been considered as a representative case study.

Research Monograph : Sustainable Australia : Containing travel in master planned estates

Low density suburban development and excessive use of automobiles are associated with serious urban and environmental problems. These problems include traffic congestion, longer commuting times, high automobile dependency, air and water pollution, and increased depletion of natural resources. Master planned development suggests itself as a possible palliative for the ills of low density and high travel. The following study examines the patterns and dynamics of movement in a selection of master planned estates in Australia. The study develops new approaches for assessing the containment of travel within planned development. Its key aim is to clarify and map the relationships between trip generation and urban form and structure. The initial conceptual framework of the report is developed in a review of literature related to urban form and travel behaviour. These concepts are tested empirically in a pilot study of suburban travel activity in master planned estates. A geographical information systems (GIS) methodology is used to determine regional journey-to-work patterns and travel containment rates. Factors that influence self-containment patterns are estimated with a regression model. The key research findings of the pilot study are: - There is a strong relation between urban structural form and patterns of trip generation; - The travel self-containment of Australian master planned estates is lower than the scholarly literature implies would occur if appropriate planning principles to achieve sustainable urban travel were followed; - Proximity to the central business district, income level and education status are positively correlated with travel containment; - Master planned estates depend more on local and regional centres for employment than on the central business district; - The service sector is the major employer in and around master planned estates. It tends to provide part-time and casual employment rather than full-time employment; - Travel self-containment is negative correlated with car dependency. Master planned estates with less car dependent residents, and with good access to public transport, appear to be more self-contained and, consequently, more sustainable than the norm. This research is a useful preliminary examination of travel self-containment in Australian master planned estates. It by no means exhausts the subject. In future research we hope to further assess sustainable travel patterns with more detailed spatial analysis.

The Later Years

Chapter summary • The adolescent and work — Advantages of part-time work — Disadvantages of part-time work — Theory/literature re vocational issues — Influences on vocational choice — How do we prepare young people for thinking about work? • The Education and Training Reforms for the Future (ETRF) in Australia: Learning or earning — What these changes mean for young people — VET (Vocational Education and Training) • Summary • Key points • Further thinking • References Who we are, our self-concept and self-esteem, for many people is tied closely to what we do. Our profession, our employment and our ambitions define us in many ways. In our society we have not yet separated completely the notion of personal worth from social contribution and status. At Australian BBQs, a pretty staple question to ask is ‘So, what do you do?’ when meeting someone new. We are pretty tolerant with a range of responses to that question, but the bottom line is the notion that there ought to be a coherent answer. Adolescents know this, and as they try to define their identity/identities and launch into adulthood they are confronted with the great unknown, the world of work...

Validation of 3D models of the outer and inner surfaces of an ovine femur

The validation of Computed Tomography (CT) based 3D models takes an integral part in studies involving 3D models of bones. This is of particular importance when such models are used for Finite Element studies. The validation of 3D models typically involves the generation of a reference model representing the bones outer surface. Several different devices have been utilised for digitising a bone’s outer surface such as mechanical 3D digitising arms, mechanical 3D contact scanners, electro-magnetic tracking devices and 3D laser scanners. However, none of these devices is capable of digitising a bone’s internal surfaces, such as the medullary canal of a long bone. Therefore, this study investigated the use of a 3D contact scanner, in conjunction with a microCT scanner, for generating a reference standard for validating the internal and external surfaces of a CT based 3D model of an ovine femur. One fresh ovine limb was scanned using a clinical CT scanner (Phillips, Brilliance 64) with a pixel size of 0.4 mm2 and slice spacing of 0.5 mm. Then the limb was dissected to obtain the soft tissue free bone while care was taken to protect the bone’s surface. A desktop mechanical 3D contact scanner (Roland DG Corporation, MDX 20, Japan) was used to digitise the surface of the denuded bone. The scanner was used with the resolution of 0.3 × 0.3 × 0.025 mm. The digitised surfaces were reconstructed into a 3D model using reverse engineering techniques in Rapidform (Inus Technology, Korea). After digitisation, the distal and proximal parts of the bone were removed such that the shaft could be scanned with a microCT (µCT40, Scanco Medical, Switzerland) scanner. The shaft, with the bone marrow removed, was immersed in water and scanned with a voxel size of 0.03 mm3. The bone contours were extracted from the image data utilising the Canny edge filter in Matlab (The Mathswork).. The extracted bone contours were reconstructed into 3D models using Amira 5.1 (Visage Imaging, Germany). The 3D models of the bone’s outer surface reconstructed from CT and microCT data were compared against the 3D model generated using the contact scanner. The 3D model of the inner canal reconstructed from the microCT data was compared against the 3D models reconstructed from the clinical CT scanner data. The disparity between the surface geometries of two models was calculated in Rapidform and recorded as average distance with standard deviation. The comparison of the 3D model of the whole bone generated from the clinical CT data with the reference model generated a mean error of 0.19±0.16 mm while the shaft was more accurate(0.08±0.06 mm) than the proximal (0.26±0.18 mm) and distal (0.22±0.16 mm) parts. The comparison between the outer 3D model generated from the microCT data and the contact scanner model generated a mean error of 0.10±0.03 mm indicating that the microCT generated models are sufficiently accurate for validation of 3D models generated from other methods. The comparison of the inner models generated from microCT data with that of clinical CT data generated an error of 0.09±0.07 mm Utilising a mechanical contact scanner in conjunction with a microCT scanner enabled to validate the outer surface of a CT based 3D model of an ovine femur as well as the surface of the model’s medullary canal.

Patterns of fitting cosmetically tinted contact lenses

Cosmetically tinted soft contact lenses are an attractive option for contact lens wearers. Data that we have gathered from annual contact lens fitting surveys demonstrate that those wearing tinted lenses are more likely to be female (4.6% of all soft lenses fitted vs. 1.6% for males; p < 0.0001) and younger (27 11 years vs. 33 13 years for those wearing non-tinted lenses; p < 0.0001). Tinted lenses tend to be worn more on a part-time basis and are replaced less frequently than non-tinted lenses. The decline in fitting tinted lenses over the past 12 years may be due to (a) the current limited availability of tinted lenses in silicone hydrogel materials and daily disposable replacement frequencies, which together represent a significant majority (78%) of new soft lenses fits today, (b) growing concerns among lens wearers and practitioners relating to the risks of complications associated with the wearing of tinted lenses, and (c) reduced promotion of such lenses by the contact lens industry.

A life jacket with holes- : a case study of 'temporary engagement' : a strategy used by Education Queensland to employ beginning secondary teachers

This research investigated the impact of Education Queensland's employment policy and practices for beginning secondary teachers appointed on temporary engagement. The context was the public secondary school sector within the state of Queensland, Australia. The study was set within a context of the changing nature of work from full-time permanent employment towards casual, fixed-term contracts, temporary and part-time employment, a trend reflected in the employment patterns for teachers within Australia. Two broad categories of literature relating to the research problem of this thesis were reviewed, namely the beginning teacher and permanency or tenure. The focus in the research literature on beginning teachers was the professional experiences of teachers within the classroom and school. There was a paucity of research that considered the working and industrial conditions of temporary employment for beginning teachers or the personal and professional implications of this form of employment. The review of the context and literature was conceptualised as a Beginning Temporary Teacher Theoretical Framework which served to inform the study. Using a qualitative case study methodology, the research techniques employed for the thesis were semi-structured interview and document analysis. A simultaneously conducted research project in which the researcher participated entitled 'Winning the Lottery? Beginning Teachers on Temporary Engagement' foregrounded this thesis in terms of refining the research question, contributing to the literature and in the selection of the participants. For this case study the perspectives of four distinct yet inter-related categories of professionals were sought. These included four beginning secondary teachers, three school administrators, a Senior Personnel Officer with Education Queensland, and a representative from the Queensland Teachers' Union. The research findings indicated that none of the beginning teachers or other professionals viewed starting a career in teaching on temporary engagement as the ideal. The negative features identified were the differential treatment received and the high level of uncertainty associated with temporary employment. Differential treatment tended to indicate 'less' entitlements, in terms of access to induction and professional development, recreational and sick leave, acceptance by and expectations of other colleagues, and avenues of redress in grievance cases. Moreover, interviews indicated a high level of uncertainty in terms of starting within the teaching profession, commencing at a new school, and a regular income. In addition, frequent changes in schools and/or cohorts of students exacerbated levels of uncertainty. The beginning teachers reported significantly decreased motivation, self-esteem and sense of belonging, and increased stress levels. There was an even more marked negative impact on those beginning teachers who had experienced a higher number of temporary engagements and schools in their first year of teaching. Conversely, strong staff support and a reasonable length of time in the one school improved the quality of the beginning teachers' experiences. The overall impact of being on temporary engagement resulted in delayed permanent position appointments, decreased commitment to particular schools and to Education Queensland as the employing authority, and for two of the beginning teachers, it produced a desire to seek alternative employment. The implementation of Education Queensland's policies relating to working conditions and entitlements for these temporary beginning teachers at the school level was revealed to be less than satisfactory. There was a tendency towards 'just-in- time' management of the beginning teacher on temporary engagement. The beginning teachers received 'less-than-messages' about access to and use of departmental documentation, support through induction and professional development, and their transition from temporary to permanent employment. To ensure a more systematic, supportive and inclusive process for managing the temporary beginning teacher, a conceptual framework entitled 'Continuums of Tension' was developed. The four continuums included permanent employment - temporary employment; system perspective - individual perspective; teaching as a profession - teaching as a job; and the permanent beginning teacher - university graduate. The general principles of the human resource policies of Education Queensland were based on a commitment to permanent employment, a system's perspective, viewing teaching as a profession and a homogeneous group of permanent beginning teachers. Contrasting with this, the beginning teacher on temporary engagement tended to operate from the position of temporary employment and a perspective that was individually based. Their priorities therefore included the 'occupational' aspects of being a temporary teacher striving to become permanent. Thus there existed a tension or contradiction between the general principles of human resource policies within Education Queensland and the employment experiences of beginning teachers on temporary engagement. The study proposed three actions for resolution to address the aforementioned tensions. The actions included: (a) the effective provision and targeted communication of information; (b) support, induction and professional development; and (c) a coordinated approach between Education Queensland, Queensland Teachers' Union, the Universities and the beginning teacher. These actions are fm1her refined to include: (a) an induction kit to suppm1 the individual through the pre-employment to permanent employee phases, (b) an extrapolation of the roles and responsibilities of Education Queensland personnel charged with supporting the beginning temporary teacher, and (c) a series of recommendations to effect a coordinated approach amongst the key stakeholders. The theoretical and conceptual frameworks have provided a means of addressing the identified needs of the beginning teacher on temporary engagement. As such, this study has contributed to the research literature on teacher employment and professionalism and aims to provide a beginning temporary teacher with managed professional and occupational support.

Trends in Australian contact lens prescribing during the first decade of the 21st Century (2000–2009)

Purpose: The aim was to document contact lens prescribing trends in Australia between 2000 and 2009. ---------- Methods: A survey of contact lens prescribing trends was conducted each year between 2000 and 2009. Australian optometrists were asked to provide information relating to 10 consecutive contact lens fittings between January and March each year. ---------- Results: Over the 10-year survey period, 1,462 practitioners returned survey forms representing a total of 13,721 contact lens fittings. The mean age (± SD) of lens wearers was 33.2 ± 13.6 years and 65 per cent were female. Between 2006 and 2009, rigid lens new fittings decreased from 18 to one per cent. Low water content lenses reduced from 11.5 to 3.2 per cent of soft lens fittings between 2000 and 2008. Between 2005 and 2009, toric lenses and multifocal lenses represented 26 and eight per cent, respectively, of all soft lenses fitted. Daily disposable, one- to two-week replacement and monthly replacement lenses accounted for 11.6, 30.0 and 46.5 per cent of all soft lens fittings over the survey period, respectively. The proportion of new soft fittings and refittings prescribed as extended wear has generally declined throughout the past decade. Multi-purpose lens care solutions dominate the market. Rigid lenses and monthly replacement soft lenses are predominantly worn on a full-time basis, whereas daily disposable soft lenses are mainly worn part-time.---------- Conclusions: This survey indicates that technological advances, such as the development of new lens materials, manufacturing methods and lens designs, and the availability of various lens replacement options, have had a significant impact on the contact lens market during the first decade of the 21st Century.

Daily disposable contact lens prescribing around the world

Daily disposable contact lenses were introduced into the market 16 years ago. Data that we have gathered from annual contact lens fitting surveys conducted in Australia, Canada, Japan, The Netherlands, Norway, the UK and the USA between 2000 and 2008 indicates an overall increase in daily disposable lens fitting during this period. Daily disposable lenses are especially popular in Japan, Norway and the UK. There is a trend for these lenses to be fitted on a part-time basis. Males are over-represented in daily disposable lens fitting—a trend that is especially evident in Canada. Daily disposable lens wearers are about two years younger than wearers of reusable lenses in Japan and The Netherlands. The convenience and health benefits of daily disposable lenses are expected to fuel continued growth in this sector.

Education-to-work transitions of aspiring creatives

Despite some segments of the creative industries in Australia performing better than other segments in terms of earnings and employment growth, they all rely on highly skilled workers and face similar workforce challenges. Workers typically experience multiple entry attempts, spells of unemployment, short-term contracts, high degrees of mobility, casual/part-time employment within and outside the creative industries, and pressure to ensure their skills remain relevant. Skills shortages and gaps, an insufficient supply of high quality industry-ready graduates, difficulties in predicting demand for skills, weak linkages between industry and education providers, reliance on overseas talent in some segments, limited opportunities for workers to engage in skill development, and pressure on workers to keep abreast of technological developments are ongoing issues in the creative industries workforce. In response to these concerns, the Australian Research Council, three State Governments, industry, and a large vocational education and training (VET) provider funded Queensland University of Technology (QUT) to conduct the 60Sox project. This three-year project investigated the education, training, and work experiences of aspiring creatives defined as new entrants, recent graduates, and students enrolled in creative industries courses. It involved the largest survey of aspiring creatives ever undertaken in Australia, attracting 507 respondents, and a survey of 50 employers. Using the framework proposed by Hannan, Raffe, and Smyth (1996), this article presents findings from an analysis of the macro and micro labour market outcomes of aspiring creatives using data from the two 60Sox project surveys and publicly available sources. The analysis confirmed that many graduates of creative industries courses who participated in the 60Sox survey and the national surveys for the National Centre for Vocational Education Research and Graduate Careers Australia were struggling to make a successful transition from education to work. This article also discusses the causes of this key finding and possible solutions to address transition issues.

Strategies to engage engineering students in group project work

Project focused group work is significant in developing social and personal skills as well as extending the ability to identify, formulate and solve engineering problems. As a result of increasing undergraduate class sizes, along with the requirement for many students to work part-time, group projects, peer and collaborative learning are seen as a fundamental part of engineering education. Group formation, connection to learning objectives and fairness of assessment has been widely reported as major issues that leave students dissatisfied with group project based units. Several strategies were trialled including a study of formation of groups by different methods across two engineering disciplines over the past 2 years. Other strategies involved a more structured approach to assessment practices of civil and electrical engineering disciplines design units. A confidential online teamwork management tool was used to collect and collate student self and peer assessment ratings and used for both formative feedback as well as assessment purposes. Student satisfaction and overall academic results in these subjects have improved since the introduction of these interventions. Both student and staff feedback highlight this approach as enhancing student engagement and satisfaction, improved student understanding of group roles, reducing number of dysfunctional groups whilst requiring less commitment of academic resources.