Peptide models for b-turns.A circular dichroism study

The circular dichroism spectra of four 0-turn model peptides, Z-Aib-Pro-Aib-Pro- OMe (l), Piv-Pro-Aib-NHMe (2), Piv-Pro-D-Ala-NHMe (3) and Piv-Pro-Val-NHMe (4) have been examined under a wide range of solvent conditions, using methanol, hexafluoroisopropanol and cyclohexane. Type I and Type I1 0-turns have been observed for peptides 1 and 2 respectively, in the solid state, while the Pro-D-Ala sequence adopts a Type I1 Sturn in a related peptide crystal structure. A class C spectrum is observed for 1 in various solvents, suggesting a variant of a Type I(II1) structure. The Type I1 f3-turn is characterized by a CD spectrum having two positive CD bands at - 230 nm and - 202 nm, a feature observed in Piv-Pro- D-Ala-NHMe in cyclohexane and methanol and for Piv-Pro-Aib-NHMe in methanol. Peptide 2 exhibits solvent dependent CD spectra, which may be rationalized by considering Type 11, I11 and V reverse turn structures. Piv-Pro- Val-NHMe adopts nonaturn structures in polar solvents, but exhibits a class B spectrum in cyclohexane suggesting a population of Type I &turns.

Kiinnostusta vai ahdistusta? : Opettajaksi opiskelevien akateemiset tunteet, motivaatio ja opiskelun ongelmat suhteessa hyvinvointiin ja menestykseen aktivoivalla luentokurssilla

Previous studies indicate that positive learning experiences are related to academic achievement as well as to well-being. On the other hand, emotional and motivational problems in studying may pose a risk for both academic achievement and well-being. Thus, emotions and motivation have an increasing role in explaining university students learning and studying. The relations between emotions, motivation, study success and well-being have been less frequently studied. The aim of this study was to investigate what kind of academic emotions, motivational factors and problems in studying students experienced five days before an exam of an activating lecture course, and the relations among these factors as well as their relation to self-study time and study success. Furthermore, the effect of all these factors on well-being, flow experience and academic achievement was examined. The term academic emotion was defined as emotion experienced in academic settings and related to studying. In the present study the theoretical background to motivational factors was based on thinking strategies and attributions, flow experience and task value. Problems in studying were measured in terms of exhaustion, anxiety, stress, lack of interest, lack of self-regulation and procrastination. The data were collected in December 2009 in an activating educational psychology lecture course by using a questionnaire. The participants (n=107) were class and kindergarten teacher students from the University of Helsinki. Most of them were first year students. The course grades were also gathered. Correlations and stepwise regression analysis were carried out to find out the factors that were related to or explained study success. The clusters that presented students´ problems in studying as well as thinking strategies and attributions, were found through hierarchical cluster analysis. K-means cluster analysis was used to form the final groups. One-way analysis of variance, Kruskal-Wallis test and crosstabs were conducted to see whether the students in different clusters varied in terms of study success, academic emotions, task value, flow, and background variables. The results indicated that academic emotions measured five days before the exam explained about 30 % of the variance of the course grade; exhaustion and interest positively, and anxiety negatively. In addition, interest as well as the self-study time best explained study success on the course. The participants were classified into three clusters according to their problems in studying as well as their thinking strategies and attributions: 1) ill-being, 2) carefree, and 3) committed and optimistic students. Ill-being students reported most negative emotions, achieved the worst grades, experienced anxiety rather than flow and were also the youngest. Carefree students, on the other hand, expressed the least negative emotions and spent the least time on self-studying, and like committed students, experienced flow. In addition, committed students reported positive emotions the most often and achieved the best grades on the course. In the future, more in-depth understanding how and why especially young first year students experience their studying hard is needed, because early state of the studies is shown to predict later study success.

Diproline Templates as Folding Nuclei in Designed Peptides. Conformational Analysis of Synthetic Peptide Helices Containing Amino Terminal Pro-Pro Segments

The effect of N-terminal diproline segments in nucleating helical folding in designed peptides has been studied in two model sequences Piv-Pro-Pro-Aib-Leu-Aib-Phe-OMe (1) and Boc-Aib-Pro-Pro-Aib-Val-Ala-Phe-OMe (2). The structure of 1 in crystals, determined by X-ray diffraction, reveals a helical (RR) conformation for the segment residues 2 to 5, stabilized by one 4 -> 1 hydrogen bond and two 5 -> 1 interactions. The N-terminus residue, Pro(1) adopts a polyproline II (P-II) conformation. NMR studies in three different solvent systems support a conformation similar to that observed in crystals. In the apolar solvent CDCl3, NOE data favor the population of both completely helical and partially unfolded structures. In the former, the Pro-Pro segment adopts an alpha(R)-alpha(R) conformation, whereas in the latter, a P-II-alpha(R) structure is established. The conformational equilibrium shifts in favor of the P-II-alpha(R) structure in solvents like methanol and DMSO. A significant population of the Pro(1)- Pro(2) cis conformer is also observed. The NMR results are consistent with the population of at least three conformational states about Pro- Pro segment: trans alpha(R)-alpha(R), trans P-II-alpha(R) and cis P-II-alpha(R). Of these, the two trans conformers are in rapid dynamic exchange on the NMR time scale, whereas the interconversion between cis and trans form is slow. Similar results are obtained with peptide 2. Analysis of 462 diproline segments in protein crystal structures reveals 25 examples of the alpha(R)-alpha(R) conformation followed by a helix. Modeling and energy minimization studies suggest that both P-II-alpha(R) and alpha(R)-alpha(R) conformations have very similar energies in the model hexapeptide 1

Substance misuse problems during pregnancy with special emphasis on buprenorphine

Maternal drug abuse during pregnancy endangers the future health and wellbeing of the infant and growing child. On the other hand, via maternal abstinence, these problems would never occur; so the problems would be totally preventable. Buprenorphine is widely used in opioid maintenance treatment as a substitute medication. In Finland, during 2000 s buprenorphine misuse has steadily increased. In 2009 almost one third of clientele of substance treatment units were in treatment because of buprenorphine dependence. At Helsinki Women s Clinic the first child with prenatal buprenorphine exposure was born in 2001. During 1992-2001 in the three capital area maternity hospitals (Women s clinic, Maternity hospital, Jorvi hospital) 524 women were followed at special antenatal clinics due to substance abuse problems. Three control women were drawn from birth register to each case woman and matched for parity and same place and date of the index birth. According to register data mortality rate was 38-fold higher among cases than controls within 6-15 years after index birth. Especially, the risk for violent or accidental death was increased. The women with substance misuse problems had also elevated risk for viral hepatitis and psychiatric morbidity. They were more often reimbursed for psychopharmaceuticals. Disability pensions and rehabilitation allowances were more often granted to cases than controls. In total 626 children were born from these pregnancies. According to register data 38% of these children were placed in out-of-home care as part of child protection services by the age of two years, and half of them by the age of 12 years, the median follow-up time was 5.8 years. The risk for out-of-home care was associated with factors identifiable during the pre- and perinatal period. In 2002-2005 67 pregnant women with buprenorphine dependence were followed up at the Helsinki University Hospital, Department of Obstetrics and Gynecology. Their pregnancies were uneventful. The prematurity rate was similar and there were no more major anomalies compared to the national statistics. The neonates were lighter compared to the national statistics. They were also born in good condition, with no perinatal hypoxia as defined by standard clinical parameters or certain biochemical markers in the cord blood: erythropoietin, S100 and cardiac troponin-t. Almost 80% of newborns developed neonatal abstinence syndrome (NAS) and two third of them needed morphine medication for it. Maternal smoking over ten cigarettes per day aggravated and benzodiazepine use attenuated NAS. An infant s highest urinary norbuprenorphine concentration during their first 3 days of life correlated with the duration of morphine treatment. The average length of infant s hospital stay was 25 days.

Nupoutuskivun vaikutus vasikan hyvinvointiin

Nupouttamisella tarkoitetaan vasikan sarvenaiheiden tuhoamista sarvien kasvun estämiseksi esimerkiksi kuumapolton avulla. Nykyisin lähes kaikki Suomessa syntyvistä vasikoista nupoutetaan turvallisuusnäkökohtien vuoksi. Suomen eläinlääkintölainsäädännön mukaan riittävät tiedot ja taidot toimenpiteen suorittamiseksi omaava henkilö saa nupouttaa alle neliviikkoisen vasikan. Eläinlääkäri voi jättää tilalle pistoksena tai suun kautta annosteltavaa tulehduskipulääkettä nupoutuskivun hoitoa varten. Nupouttamisen on useissa tutkimuksissa todettu aiheuttavan vasikalle kipua, joka ilmenee muun muassa pakenemisyrityksinä toimenpiteen yhteydessä sekä levottomuutena, sosiaalisen käyttäytymisen vähenemisenä, kohonneena sydämen sykkeenä ja stressihormonien tason nousuna nupoutuksen jälkeen. Tähänastisissa tutkimuksissa nupoutuskipua on tutkittu pisimmillään kahden vuorokauden ajan. Koska kuumapoltolla nupouttaminen saa aikaan syvän palovamman, voidaan olettaa vasikan kokevan useiden päivien ajan kipua, joka vaikuttaa hyvinvointia alentavasti. Nupoutuksen vaikutusta vasikoiden makuukäyttäytymiseen tutkittiin viiden päivän ajan nupoutustoimenpiteen jälkeen olettaen, että useamman päivän mittainen tulehduskipulääkekuuri parantaisi vasikoiden hyvinvointia. Tutkimukseen valittiin satunnaisesti kymmenen sonnivasikkaa (keski-ikä 27± 5,6 vrk). Vasikat satunnaistettiin kahteen hoitoryhmään, joista toiset saivat nupoutuspäivänä ja sen jälkeen ketoprofeenivalmistetta suun kautta yhteensä viiden päivän ajan, ja toiset vastaavasti lumelääkettä. Kaikki vasikat nupoutettiin rauhoitettuina ja paikallispuudutettuina kaasukuumenteista nupoutuskolvia käyttäen. Vasikoita videoitiin kuuden vuorokauden ajan, alkaen vuorokausi ennen nupoutusta. Videoaineisto analysoitiin Cowlog -tietokoneohjelmalla. Vasikoita lääkinneet henkilöt sekä videoiden analysoinnin suorittaja eivät tienneet, kumpaan hoitoryhmään kukin vasikka kuului. Koetilanne oli siis kaksoissokkoutettu. Nupoutuspäivää ei otettu huomioon tuloksissa, koska vasikat nupoutettiin rauhoitettuna. Nupoutustoimenpide lyhensi vasikoiden keskimääräistä yhteenlaskettua makuuaikaa vuorokaudessa 1028,2 ± 23,8 minuutista (päivä ennen nupoutusta) 886,1 ± 23,8 minuuttiin (nupoutuspäivää seuraava päivä). Nupoutuspäivää seuraavana päivänä vasikoiden keskimääräinen kokonaismakuuaika oli tilastollisesti merkittävästi lyhyempi verrattuna kaikkiin muihin päiviin (p<0,05). Tuloksissa oli havaittavissa tilastollinen tendenssi, jonka mukaan lumelääkittyjen vasikoiden makuujaksojen lukumäärä vuorokaudessa (22,7±1,6 kertaa) oli tulehduskipulääkittyihin vasikoihin (17,7±1,6 kertaa) verrattuna suurempi koko seurantajakson aikana (p=0,06). Tulehduskipulääkittyjen vasikoiden makuujaksojen keskimääräinen pituus koko seurantajakson aikana oli merkittävästi suurempi (57,3 ± 3,1 minuuttia) kuin lumelääkittyjen vasikoiden (45,0 ± 3,1 minuuttia) (p=0,02). Nupoutus lyhensi kaikkien vasikoiden päivittäistä kokonaismakuuaikaa, mikä viittaa vasikoiden kokeneen akuuttia kipua tulehduskipulääkityksestä huolimatta. Akuutti kipu ja stressi ilmenivät levottomuutena vasikoiden makuukäyttäytymisessä. Riittävä ja laadukas uni on edellytys vasikan kasvulle ja hyvinvoinnille, mikä tekee aiheesta tärkeän myös taloudellisesta näkökulmasta. Tuloksien perusteella voidaan todeta, että nupoutuksen aiheuttama kipu kestää useita päiviä, mutta jatkotutkimuksia tarvitaan kivunhoitovaihtoehtojen osalta sekä kivun kestosta suuremmalla otannalla.

Accessibility as a determinant of opportunities : A case study from Peruvian Amazonia

Accessibility is a crucial factor for interaction between areas in economic, cultural, political and environmental terms. Therefore, information concerning accessibility is relevant for informed decision making, planning and research. The Loreto region in the Peruvian Amazonia provides an interesting scene for an accessibility study. Loreto is sparsely populated and because there are few roads in the region, in practice all movement and transportation happens along the river network. Due to the proximity of the Andes, river dynamics are strong and annual changes in water level combined with these dynamic processes constantly reshape accessibility patterns of the region. Selling non-timber forest products (NTFP) and agricultural products (AP) in regional centres is an important income source for local rain forest dwellers. Thus, accessibility to the centres is crucial for the livelihood of local population. -- In this thesis I studied how accessible the regional centre Iquitos is from other parts of Loreto. In addition, I studied the regional NTFP/AP trade patterns and compared them with patterns of accessibility. Based on GPS-measurements, using GIS, I created a time-distance surface covering Loreto. This surface describes the time-distance to Iquitos, along the river network. Based on interview material, I assessed annual changes to accessibility patterns in the region. The most common regional NTFP/AP were classified according to the amount of time they can be preserved, and based on the accessibility surface, I modelled a catchment area for each of these product classes. -- According to my results, navigation speeds vary considerably in different parts of the river network, depending on river types, vessels, flow direction and season. Navigating downstream is, generally, faster than upstream navigation. Thus, Iquitos is better accessible from areas situated south and south west of the city, like along the rivers Ucayali and Marañon. Differences in accessibility between different seasons are also substantial: during the dry season navigation is slower due to lower water levels and emerging sand bars. Regularly operating boats follow routes only along certain rivers and close to Iquitos transport facilities are more abundant than in more distant areas. Most of the products present in Iquitos market places are agricultural products, and the share of NTFP is significantly smaller. Most of the products were classified in product class 2, and the catchment area for these products is rather small. Many products also belonged to class 5, and the catchment area for these products reaches up to the edges of my study area, following the patterns of the river network. -- The accessibility model created in this study predicts travel times relatively well, although in some cases the modelled time-distances are substantially shorter than observed time-distances. This is partly caused by the fact that real-life navigation routes are more complicated than the modelled routes. Rain forest dwellers having easier access to Iquitos have more opportunities in terms of the products they decide to market. Thus, they can better take advantage of other factors affecting the market potential of different products. -- In all, understanding spatial variation in accessibility is important. In the Amazonian context it is difficult to combine the accessibility-related needs of the local dwellers with conservation purposes and the future challenge lies in finding solution that satisfy both of these needs.

Axially homogeneous, zero mean flow buoyancy-driven turbulence in a vertical pipe

We report an experimental study of a new type of turbulent flow that is driven purely by buoyancy. The flow is due to an unstable density difference, created using brine and water, across the ends of a long (length/diameter=9) vertical pipe. The Schmidt number Sc is 670, and the Rayleigh number (Ra) based on the density gradient and diameter is about 108. Under these conditions the convection is turbulent, and the time-averaged velocity at any point is ‘zero’. The Reynolds number based on the Taylor microscale, Reλ, is about 65. The pipe is long enough for there to be an axially homogeneous region, with a linear density gradient, about 6–7 diameters long in the midlength of the pipe. In the absence of a mean flow and, therefore, mean shear, turbulence is sustained just by buoyancy. The flow can be thus considered to be an axially homogeneous turbulent natural convection driven by a constant (unstable) density gradient. We characterize the flow using flow visualization and particle image velocimetry (PIV). Measurements show that the mean velocities and the Reynolds shear stresses are zero across the cross-section; the root mean squared (r.m.s.) of the vertical velocity is larger than those of the lateral velocities (by about one and half times at the pipe axis). We identify some features of the turbulent flow using velocity correlation maps and the probability density functions of velocities and velocity differences. The flow away from the wall, affected mainly by buoyancy, consists of vertically moving fluid masses continually colliding and interacting, while the flow near the wall appears similar to that in wall-bound shear-free turbulence. The turbulence is anisotropic, with the anisotropy increasing to large values as the wall is approached. A mixing length model with the diameter of the pipe as the length scale predicts well the scalings for velocity fluctuations and the flux. This model implies that the Nusselt number would scale as Ra1/2Sc1/2, and the Reynolds number would scale as Ra1/2Sc−1/2. The velocity and the flux measurements appear to be consistent with the Ra1/2 scaling, although it must be pointed out that the Rayleigh number range was less than 10. The Schmidt number was not varied to check the Sc scaling. The fluxes and the Reynolds numbers obtained in the present configuration are much higher compared to what would be obtained in Rayleigh–Bénard (R–B) convection for similar density differences.

Velocity and rotation measurements in acoustically levitated droplets

The velocity scale inside an acoustically levitated droplet depends on the levitator and liquid properties. Using Particle Imaging Velocimetry (PIV), detailed velocity measurements have been made in a levitated droplet of different diameters and viscosity. The maximum velocity and rotation are normalized using frequency and amplitude of acoustic levitator, and droplet viscosity. The non-dimensional data are fitted for micrometer- and millimeter-sized droplets levitated in different levitators for different viscosity fluids. It is also shown that the rotational speed of nanosilica droplets at an advanced stage of vaporization compares well with that predicted by exponentially fitted parameters. (C) 2012 Elsevier B.V. All rights reserved.

Study of Submerged Jet for Suction of Fluid

This paper deals with the study of a submerged jet for the suction of unwanted fluid. This submerged jet is caused by the fluid coming out from a source. The presence of a sink in front of this source facilitates the suction of the fluid depending upon the source and sink flow rates, the axial and lateral separations of the source and sink, and the angle between the axes of the source and sink. The main purpose is the determination of the sink flow rate for 100% removal of the source fluid as a function of these parameters. The experiments have been carried using a source nozzle 6 mm in diameter and two sizes for the sink pipe diameter: 10 mm and 20 mm. The main diagnostics used are flow visualization using dye and particle image velocimetry (PIV). The dependence of the required suction flow rate to obtain 100% effectiveness on the suction tube diameter and angle is relatively weak compared to the lateral separation. DOI: 10.1115/1.4007266]

Crystal-structure analysis of cis-X-pro-containing peptidomimetics: understanding the steric interactions at cis X-pro amide bonds

Catch the twist: The cis Piv-Pro conformer (Piv=pivaloyl) of peptides is no longer inaccessible. Any cis X-Pro tertiary-amide-bond conformer can be stabilized in crystals of peptides by accommodating the unavoidable distortion of the dihedral angle of the peptide bond to the carbonyl group of the Pro residue (see picture), in this case through ni−1→πi* interactions. Steric clashes were not observed in the cis Piv-Pro rotamers studied.

Experimental Studies on the Kinematics of Cutting in Granular Materials

Slow flow in granular materials is characterized by high solid fraction and sustained inter-particle interaction. The kinematics of trawling or cutting is encountered in processes such as locomotion of organisms in sand; trawl gear movement on a soil deposit; plow movement; movement of rovers, earth moving equipment etc. Additionally, this configuration is very akin to shallow drilling configuration encountered in the mining and petroleum industries. An experimental study has been made in order to understand velocity and deformation fields in cutting of a model rounded sand. Under nominal plane strain conditions, sand is subjected to orthogonal cutting at different tool-rake angles. High-resolution optical images of the region of cutting were obtained during the flow of the granular ensemble around the tool. Interesting kinematics underlying the formation of a chip and the evolution of the deformation field is seen in these experiments. These images are also analyzed using a PIV algorithm and detailed information of the deformation parameters such as velocity, strain rate and volume change is obtained.

Stall flutter of NACA 0012 airfoil at low Reynolds numbers

In the present work, we experimentally study and demarcate the stall flutter boundaries of a NACA 0012 airfoil at low Reynolds numbers (Re similar to 10(4)) by measuring the forces and flow fields around the airfoil when it is forced to oscillate. The airfoil is placed at large mean angle of attack (alpha(m)), and is forced to undergo small amplitude pitch oscillations, the amplitude (Delta alpha) and frequency (f) of which are systematically varied. The unsteady loads on the oscillating airfoil are directly measured, and are used to calculate the energy transfer to the airfoil from the flow. These measurements indicate that for large mean angles of attack of the airfoil (alpha(m)), there is positive energy transfer to the airfoil over a range of reduced frequencies (k=pi fc/U), indicating that there is a possibility of airfoil excitation or stall flutter even at these low Re (c=chord length). Outside this range of reduced frequencies, the energy transfer is negative and under these conditions the oscillations would be damped. Particle Image Velocimetry (PIV) measurements of the flow around the oscillating airfoil show that the shear layer separates from the leading edge and forms a leading edge vortex, although it is not very clear and distinct due to the low oscillation amplitudes. On the other hand, the shear layer formed after separation is found to clearly move periodically away from the airfoil suction surface and towards it with a phase lag to the airfoil oscillations. The phase of the shear layer motion with respect to the airfoil motions shows a clear difference between the exciting and the damping case.

Rack Level Modeling of Air Flow Through Perforated Tile in a Data Center

Effective air flow distribution through perforated tiles is required to efficiently cool servers in a raised floor data center. We present detailed computational fluid dynamics (CFD) modeling of air flow through a perforated tile and its entrance to the adjacent server rack. The realistic geometrical details of the perforated tile, as well as of the rack are included in the model. Generally, models for air flow through perforated tiles specify a step pressure loss across the tile surface, or porous jump model based on the tile porosity. An improvement to this includes a momentum source specification above the tile to simulate the acceleration of the air flow through the pores, or body force model. In both of these models, geometrical details of tile such as pore locations and shapes are not included. More details increase the grid size as well as the computational time. However, the grid refinement can be controlled to achieve balance between the accuracy and computational time. We compared the results from CFD using geometrical resolution with the porous jump and body force model solution as well as with the measured flow field using particle image velocimetry (PIV) experiments. We observe that including tile geometrical details gives better results as compared to elimination of tile geometrical details and specifying physical models across and above the tile surface. A modification to the body force model is also suggested and improved results were achieved.

COMPARISON AND CROSS-VALIDATION OF OPTICAL TECHNIQUES IN DIFFERENT SWIRL SPRAY REGIMES

This paper deals with an experimental study of pressure-swirl hydraulic injector nozzles using non-intrusive optical techniques. Experiments were conducted to study atomization characteristics using two nozzles with different orifice diameters, 0.3 mm and 0.5 mm, and injection pressures, 0.3-3.5 Mpa, which correspond to Reynolds number (Re-p) = 7,000-45,000, depending on nozzle utilized. Three laser diagnostic techniques were utilized: Shadowgraph, PIV (Particle Image Velocimetry), and PDPA (Phase Doppler Particle Anemometry). Measurements made in the spray in both axial and radial directions indicate that velocity, average droplet diameter profiles, and spray dynamics are highly dependent on the nozzle characteristics and injection pressure. Limitations of these techniques in the different flow regimes, related to the primary and secondary breakups as well as coalescence, are provided. Results indicate that all three techniques provide similar results throughout the different regimes. Shadowgraph and PDPA were possible in the secondary atomization and coalescence regimes while PIV measurements could be made only at the end of secondary atomization and coalescence.

Steric and Electronic Interactions Controlling the cis/trans Isomer Equilibrium at X-Pro Tertiary Amide Motifs in Solution

A systematic understanding of the noncovalent interactions that influence the structures of the cis conformers and the equilibrium between the cis and the trans conformers, of the X-Pro tertiary amide motifs, is presented based on analyses of H-1-, C-13-NMR and FTIR absorption spectra of two sets of homologous peptides, X-Pro-Aib-OMe and X-Pro-NH-Me (where X is acetyl, propionyl, isobutyryl and pivaloyl), in solvents of varying polarities. First, this work shows that the cis conformers of any X-Pro tertiary amide motif, including Piv-Pro, are accessible in the new motifs X-Pro-Aib-OMe, in solution. These conformers are uniquely observable by FTIR spectroscopy at ambient temperatures and by NMR spectroscopy from temperatures as high as 273 K. This is made possible by the persistent presence of n(i-1i)* interactions at Aib, which also influence the disappearance of steric effects at these cis X-Pro rotamers. Second, contrary to conventional understanding, the energy contribution of steric effects to the cis/trans equilibrium at the X-Pro motifs is found to be nonvariant (0.54 +/- 0.02 kcal/mol) with increase in steric bulk on the X group. Third, the current studies provide direct evidence for the weak intramolecular interactions namely the n(i-1i)*, the N-Pro center dot center dot center dot Hi+1 (C(5)a), and the C-7 hydrogen bond that operate and influence the structures, stabilities, and dynamics between different conformational states of X-Pro tertiary amide motifs. NMR and IR spectral data suggest that the cis conformers of X-Pro motifs are ensembles of short-lived rotamers about the C-X-N-Pro bond. (c) 2013 Wiley Periodicals, Inc. Biopolymers 101: 66-77, 2014.