QED and relativistic corrections in superheavy elements

In this paper we review the different relativistic and QED contributions to energies, ionic radii, transition probabilities and Landé g-factors in super-heavy elements, with the help of the MultiConfiguration Dirac-Fock method (MCDF). The effects of taking into account the Breit interaction to all orders by including it in the self-consistent field process are demonstrated. State of the art radiative corrections are included in the calculation and discussed. We also study the non-relativistic limit of MCDF calculation and find that the non-relativistic offset can be unexpectedly large.

Assessment and optimization of wind energy integration into the power systems: application to the portuguese system

The increasing integration of wind energy in power systems can be responsible for the occurrence of over-generation, especially during the off-peak periods. This paper presents a dedicated methodology to identify and quantify the occurrence of this over-generation and to evaluate some of the solutions that can be adopted to mitigate this problem. The methodology is applied to the Portuguese power system, in which the wind energy is expected to represent more than 25% of the installed capacity in a near future. The results show that the pumped-hydro units will not provide enough energy storage capacity and, therefore, wind curtailments are expected to occur in the Portuguese system. Additional energy storage devices can be implemented to offset the wind energy curtailments. However, the investment analysis performed show that they are not economically viable, due to the present high capital costs involved.

An high-speed parametric ADC and a co-designed mixer for CMOS RF receivers

Dissertação apresentada na faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Low power low voltage quadrature RC oscillators for modern RF receivers

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

A atividade dos estabilizadores da omoplata e movimento compensatório do tronco no gesto de alcance em indivíduos pós AVE

Introdução: Lesões como o AVE interferem com a capacidade de recrutar níveis adequados de atividade muscular, podendo levar ao aparecimento de movimentos compensatórios como a excessiva translação anterior do tronco, associada ao gesto de alcance. Objetivos: Descrever a relação entre a atividade dos estabilizadores da omoplata e o movimento compensatório do tronco no gesto de alcance, em 4 indivíduos pós AVE. Pretendeu-se também analisar o papel dos estabilizadores da omoplata na função do membro superior. Métodos: Quatro indivíduos com diagnóstico de AVE, que apresentavam alterações no nível de actividade dos estabilizadores da omoplata contralesional, foram sujeitos a uma avaliação realizada em três momentos, antes (M0), durante (M1) e após (M2) e a um período de intervenção, segundo os princípios do Conceito de Bobath. Recorreu-se à electromiografia de superfície para avaliar a atividade e o timming dos músculos grande dorsal, trapézio superior e trapézio inferior do hemicorpo contralesional e ao software de Avaliação Postural (SAPO) para analisar o deslocamento do tronco no sentido anterior, associados à realização do gesto de alcance. Foram aplicadas as escalas RPS e MESUPES para avaliar as componentes de movimento do gesto de alcance e a função do membro superior, respetivamente. Recorreu-se ao registo fotográfico para análise dos componentes de movimento na posição de sentado e em pé.Resultados: Os dados eletromiográficos registam atividade dos estabilizadores da omoplata unicamente num indivíduo em M2. A análise do deslocamento anterior do tronco revela melhorias em M1 em todos os indivíduos, sendo que em M2 essa evolução positiva não foi observada em três dos participantes. Entre M0 e M2, na escala RPS registam-se melhorias de 7 a 9 pontos no alvo próximo e de 5 a 10 pontos no alvo distante. Na escala MESUPES verificam-se melhorias entre 5 a 18 pontos na sub-escala braço e entre 5 a 8 pontos na sub-escala mão, em M2. A avaliação do registo fotográfico revela modificações nos componentes de movimento dos quatro indivíduos, nomeadamente na integração dos MI na base de suporte, na atividade do tronco inferior e superior e no alinhamento do MS contralesional. Conclusão: A melhoria do nível da atividade dos estabilizadores dinâmicos da omoplata sugere ter influência na diminuição do movimento compensatório do tronco no gesto de alcance e parece ter um papel na melhoria da eficácia distal do MS do mesmo lado.

Influência do tipo de adesivo em juntas híbridas soldadas-adesivas

A necessidade de utilizar métodos de ligação entre componentes de forma mais rápida, eficaz e com melhores resultados, tem causado a crescente utilização das juntas adesivas, em detrimento dos métodos tradicionais de ligação tais como a soldadura, brasagem, ligações aparafusadas e rebitadas. A utilização das juntas adesivas tem vindo a aumentar em diversas aplicações industriais por estas apresentarem vantagens das quais se destacam a redução de peso, redução de concentrações de tensões e facilidade de fabrico. No entanto, também apresentam desvantagens, como a necessidade de preparação das juntas e o descentramento da carga aplicada que provoca efeitos de flexão, os quais dão origem a tensões normais na direcção da espessura do adesivo (tensões de arrancamento), afectando assim a resistência da junta. A combinação da ligação adesiva com a soldadura por pontos permite algumas vantagens em comparação com as juntas adesivas tradicionais como a maior resistência, aumento da rigidez, melhor resistência ao corte e arrancamento e também à fadiga. Neste trabalho é apresentado um estudo experimental e numérico de juntas de sobreposição simples adesivas e híbridas (adesivas-soldadas). Os adesivos utilizados são o Araldite AV138®, apresentado como sendo frágil, e os adesivos Araldite 2015® e Sikaforce® 7752, intitulados como adesivos dúcteis. Foram considerados substratos de aço (C45E) em juntas com diferentes comprimentos de sobreposição ( ), que foram sujeitas a esforços de tracção. Foi realizada uma análise dos valores experimentais e efectuada uma comparação destes valores com os resultados obtidos por Elementos Finitos (EF) no software ABAQUS®, que incluiu uma análise de tensões na camada de adesivo e previsão do comportamento das juntas por Modelos de Dano Coesivo (MDC). A análise por MDC permitiu obter os modos de rotura, as curvas força-deslocamento e a resistência das juntas com bastante precisão, com excepção das juntas coladas com o adesivo Sikaforce® 7752. Estes resultados permitiram validar a técnica de modelação proposta para as juntas coladas e híbridas, o que representa uma base para posterior aplicação desta técnica em projecto, com as vantagens decorrentes da redução do tempo de projecto e maior facilidade de optimização.

Desinfestação de diferentes tipos de papel utilizando o calor solar: estudo dos seus efeitos em estufa e aplicação sob diferentes condições climatéricas

Dissertação de Mestrado em Conservação e Restauro área de especialização: Documentos Gráficos

A framework for memory contention analysis in multi-core platforms

The last decade has witnessed a major shift towards the deployment of embedded applications on multi-core platforms. However, real-time applications have not been able to fully benefit from this transition, as the computational gains offered by multi-cores are often offset by performance degradation due to shared resources, such as main memory. To efficiently use multi-core platforms for real-time systems, it is hence essential to tightly bound the interference when accessing shared resources. Although there has been much recent work in this area, a remaining key problem is to address the diversity of memory arbiters in the analysis to make it applicable to a wide range of systems. This work handles diverse arbiters by proposing a general framework to compute the maximum interference caused by the shared memory bus and its impact on the execution time of the tasks running on the cores, considering different bus arbiters. Our novel approach clearly demarcates the arbiter-dependent and independent stages in the analysis of these upper bounds. The arbiter-dependent phase takes the arbiter and the task memory-traffic pattern as inputs and produces a model of the availability of the bus to a given task. Then, based on the availability of the bus, the arbiter-independent phase determines the worst-case request-release scenario that maximizes the interference experienced by the tasks due to the contention for the bus. We show that the framework addresses the diversity problem by applying it to a memory bus shared by a fixed-priority arbiter, a time-division multiplexing (TDM) arbiter, and an unspecified work-conserving arbiter using applications from the MediaBench test suite. We also experimentally evaluate the quality of the analysis by comparison with a state-of-the-art TDM analysis approach and consistently showing a considerable reduction in maximum interference.

Gait Analysis of Natural and Artificial Walking Systems

This paper studies periodic gaits of multi-legged locomotion systems based on dynamic models. The purpose is to determine the system performance during walking and the best set of locomotion variables. For that objective the prescribed motion of the robot is completely characterized in terms of several locomotion variables such as gait, duty factor, body height, step length, stroke pitch, foot clearance, legs link lengths, foot-hip offset, body and legs mass and cycle time. In this perspective, we formulate three performance measures of the walking robot namely, the mean absolute energy, the mean power dispersion and the mean power lost in the joint actuators per walking distance. A set of model-based experiments reveals the influence of the locomotion variables in the proposed indices.

Performance Issues in Biped Walking Robots

This paper presents the dynamic analysis of robotic biped systems. The main goal is to gain insight into the phenomena of walking and to evaluate its performance. In this study, we propose three methods to quantitatively measure the dynamic efficiency of walking: energy analysis, perturbation analysis and lowpass frequency analysis. In order to accomplish this goal, the prescribed motion of the biped is completely characterised in terms of a set of locomotion variables, namely: step lenght, hip height, hip ripple, hip offset, foot clearance and link lenghts. based on these variables and their influence, the performance measures aer discussed and the results compared with those observed in nature.

Economic Evaluation of Ticagrelor for Secondary Prevention Following Acute Coronary Syndromes

INTRODUCTION AND OBJECTIVES: To estimate the cost-effectiveness and cost-utility of ticagrelor in the treatment of patients with acute coronary syndromes (unstable angina or myocardial infarction with or without ST-segment elevation), including patients treated medically and those undergoing percutaneous coronary intervention or coronary artery bypass grafting. METHODS: A short-term decision tree and a long-term Markov model were used to simulate the evolution of patients' life-cycles. Clinical effectiveness data were collected from the PLATO trial and resource use data were obtained from the Hospital de Santa Marta database, disease-related group legislation and the literature. RESULTS: Ticagrelor provides increases of 0.1276 life years and 0.1106 quality-adjusted life years (QALYs) per patient. From a societal perspective these clinical gains entail an increase in expenditure of €610. Thus the incremental cost per life year saved is €4780 and the incremental cost per QALY is €5517. CONCLUSIONS: The simulation results show that ticagrelor reduces events compared to clopidogrel. The costs of ticagrelor are partially offset by lower costs arising from events prevented. The use of ticagrelor in clinical practice is therefore cost-effective compared to generic clopidogrel.

Dual track sell-out: Signaling through IPO and Underpricing

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

High ffficiency transmission techniques for broadband wireless systems

Future broadband wireless systems are expected to cope with severely time dispersive channels, due to multi-path signal propagation between the transmitter and the receiver while having high power and spectral efficiency. Thus, advanced Frequency Domain Equalization techniques are required. The implementation complexity in mobile terminals should be as low as possible to achieve highest possible efficiency. Therefore, most of the signal processing requirements will be shifted to the base station and we will employ signals compatible with an efficient, grossly nonlinear power amplification. For this reason, we will consider offset modulation signals with quasi-constant envelope and develop receivers that will obtain good BER performance. However, these signals require a bandwidth significantly above the Nyquist rate, which can be reduced by an overlap of different frequency channels.

Pair trading: Clustering based on principal component analysis

This study focuses on the implementation of several pair trading strategies across three emerging markets, with the objective of comparing the results obtained from the different strategies and assessing if pair trading benefits from a more volatile environment. The results show that, indeed, there are higher potential profits arising from emerging markets. However, the higher excess return will be partially offset by higher transaction costs, which will be a determinant factor to the profitability of pair trading strategies. Also, a new clustering approach based on the Principal Component Analysis was tested as an alternative to the more standard clustering by Industry Groups. The new clustering approach delivers promising results, consistently reducing volatility to a greater extent than the Industry Group approach, with no significant harm to the excess returns.

The absence of the human platelet antigen polymorphism effect on fibrosis progression in human immunodeficiency virus-1/hepatitis C virus coinfected patients

AbstractINTRODUCTION:Hepatic fibrosis progression in patients with chronic hepatitis C virus infections has been associated with viral and host factors, including genetic polymorphisms. Human platelet antigen polymorphisms are associated with the rapid development of fibrosis in HCV-monoinfected patients. This study aimed to determine whether such an association exists in human immunodeficiency virus-1/hepatitis C virus-coinfected patients.METHODS:Genomic deoxyribonucleic acid from 36 human immunodeficiency virus-1/hepatitis C virus-coinfected patients was genotyped to determine the presence of human platelet antigens-1, -3, or -5 polymorphisms. Fibrosis progression was evaluated using the Metavir scoring system, and the patients were assigned to two groups, namely, G1 that comprised patients with F1, portal fibrosis without septa, or F2, few septa (n = 23) and G2 that comprised patients with F3, numerous septa, or F4, cirrhosis (n = 13). Fisher's exact test was utilized to determine possible associations between the human platelet antigen polymorphisms and fibrosis progression.RESULTS:There were no deviations from the Hardy-Weinberg equilibrium in the human platelet antigen systems evaluated. Statistically significant differences were not observed between G1 and G2 with respect to the distributions of the allelic and genotypic frequencies of the human platelet antigen systems.CONCLUSION:The greater stimulation of hepatic stellate cells by the human immunodeficiency virus and, consequently, the increased expression of transforming growth factor beta can offset the effect of human platelet antigen polymorphism on the progression of fibrosis in patients coinfected with the human immunodeficiency virus-1 and the hepatitis C virus.