Discards from experimental trammel nets in southern European small-scale fisheries

Trammel net discards in four southern European areas were considerable, with a total of 137 species (79.7% of the total) discarded 65, 105, 46 and 32 species in the Basque country (Spain), Algarve (Portugal), Gulf of Cadiz (Spain) and Cyclades islands (Greece), respectively. The overall discard rate in terms of catch numbers ranged from 15% for the Cyclades to 49% for the Algarve, with the high discard rate for the latter due largely to small pelagic fishes. Discards in the four areas consisted mainly of Trisopterus luscus (Basque country), Scomber japonicus (Algarve), Torpedo torpedo (Cadiz) and Sardina pilchardus (all three areas), and Diplodus annularis in the Cyclades. Strong seasonal variation in discarding was found, reflecting differences in metiers and the versatility of trammel nets as a gear. Discarding, both in terms of numbers of species and individuals decreased with increasing inner panel mesh size. The main reasons for discarding were: (1) species of no or low commercial value (e.g. Scomber japonicus; Torpedo torpedo), (2) commercial species that were damaged or spoiled (e.g. Merluccius merluccius), (3) undersized commercial species (e.g. Lophius piscatorius), and (4) species of commercial value but not caught in sufficient quantities to warrant sale (e.g. Sardina pilchardus). A decrease in soak time together with the appropriate choice of mesh sizes could contribute to a reduction in discarding and to improved sustainability and use of scarce resources in the small-scale, inshore multi-species fisheries of southern Europe. (C) 2007 Elsevier B.V. All rights reserved.

Quantifying the roles of competing static gears: comparative selectivity of longlines and monofilament gill nets in a multi-species fishery of the Algarve (southern Portugal)

Fishing trials with monofilament gill nets and longlines using small hooks were carried out in Algarve waters (southern Portugal) over a one-year period. Four hook sizes of "Mustad" brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 25, 30, 35 and 40 mm (bar length) monofilament gill nets were used. Commercially valuable sea breams dominated the longline catches while small pelagics were relatively more important in the gill nets. Significant differences in the catch size frequency distributions of the two gears were found for all the most important species caught by both gears (Boops boops, Diplodus bellottii, Diplodus vulgaris, Pagellus acarne, Pagellus erythrinus, Spondyiosoma cantharus, Scomber japonicus and Scorpaena notata), with longlines catching larger fish and a wider size range than nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection. A variety of models were fitted to the gill net and hook data using the SELECT method, while the parameters of the logistic model were estimated by maximum likelihood for the longline data. The bi-normal model gave the best fits for most of the species caught with gill nets, while the logistic model adequately described hook selectivity. The results of this study show that the two static gears compete for many of the same species and have different impacts in terms of catch composition and size selectivity. This information will I;e useful for the improved management of these small-scale fisheries in which many different gears compete for scarce resources.

Size selectivity of trammel nets in southern European small-scale fisheries

Trammel net size selectivity was studied for the most important metiers in four southern European areas: the Cantabrian Sea (Atlantic, Basque Country, Spain), the Algarve (Atlantic, southern Portugal), the Gulf of Cadiz (Atlantic, Spain) and the Cyclades Islands (Mediterranean, Aegean Sea, Greece). These metiers were: cuttlefish (Sepia officinalis) and soles (Solea senegalensis, Microchirus azevia, Synaptura lusitanica) in the Algarve and the Gulf of Cadiz, sole (Solea solea) in the Cantabrian Sea and mixed fin-fish in the Cyclades. In each area, experimental trammel nets of six different types (combinations of two large outer panel mesh sizes and three small inner panel meshes) were constructed. Fishing trials were carried out on a seasonal basis (four seasons in the Cantabrian Sea, Algarve and Cyclades and two seasons in the Gulf of Cadiz) with chartered commercial fishing vessels. Overall, size selectivity was estimated for 17 out of 28 species for which sufficient data were available. Trammel nets generally caught a wide size range of the most important species, with length frequency distributions that were skewed to the right and/or bi-modal. In many cases the length frequency distributions of the different nets were highly overlapped. The Kolmogorov-Smirnov test also showed that the large outer panel meshes generally had no effect in terms of size selectivity, while the opposite was true for the small inner panel ones. Six different selectivity models (normal scale, normal location, gamma, log-normal, bi-modal and gamma semi-Wileman) were fitted to data for the most abundant species in the four areas. For fish, the bi-modal model provided the best fits for the majority of the data sets, with the uni-modal models giving poor fits in most cases. For Sepia officinalis, where trammelling or pocketing was the method of capture in 100% of the cases, the logistic model fitted by maximum likelihood was judged to be more appropriate for describing the size selective properties of the trammel nets. Our results, which are among the first ones on trammel net selectivity in European waters, will be useful for evaluating the impacts of competing gear for the socio-economically important small-scale static gear fisheries. (c) 2006 Elsevier B.V All rights reserved.

Augmented Reality for Airport Control Tower: Analysis and Implementation of Safety Nets

With the development of new technologies, Air Traffic Control, in the nearby of the airport, switched from a purely visual control to the use of radar, sensors and so on. As the industry is switching to the so-called Industry 4.0, also in this frame, it would be possible to implement some of the new tools that can facilitate the work of Air Traffic Controllers. The European Union proposed an innovative project to help the digitalization of the European Sky by means of the Single European Sky ATM Research (SESAR) program, which is the foundation on which the Single European Sky (SES) is based, in order to improve the already existing technologies to transform Air Traffic Management in Europe. Within this frame, the Resilient Synthetic Vision for Advanced Control Tower Air Navigation Service Provision (RETINA) project, which saw the light in 2016, studied the possibility to apply new tools within the conventional control tower to reduce the air traffic controller workload, thanks to the improvements in the augmented reality technologies. After the validation of RETINA, the Digital Technologies for Tower (DTT) project was established and the solution proposed by the University of Bologna aimed, among other things, to introduce Safety Nets in a Head-Up visualization. The aim of this thesis is to analyze the Safety Nets in use within the control tower and, by developing a working concept, implement them in a Head-Up view to be tested by Air Traffic Control Operators (ATCOs). The results, coming from the technical test, show that this concept is working and it could be leading to a future implementation in a real environment, as it improves the air traffic controller working conditions also when low visibility conditions apply.

A constituição da intervenção profissional em Educação Fisica : interações entre o conhecimento formalizado e a noção de competencia

Universidade Estadual de Campinas. Faculdade de Educação Física

Risco, corpo e socialidade no voo livre

Universidade Estadual de Campinas . Faculdade de Educação Física

A assembléia de abelhas (Hymenoptera, Apidae) de uma área restrita de campos naturais do Parque Estadual de Vila Velha, Paraná e comparações com áreas de campos e cerrado

A assembléia de abelhas (Hymenoptera, Apidae) de uma área restrita de campos naturais do Parque Estadual de Vila Velha, Paraná e comparações com áreas de campos e cerrado. Foram realizadas coletas sistemáticas de abelhas em uma área restrita no Parque Estadual de Vila Velha, Paraná, no período de outubro de 2003 a setembro de 2004. Essa amostragem visou gerar subsídios para comparações entre áreas de campo dentro do Parque e com outras áreas de vegetação aberta brasileiras. A área de estudo possui cerca de quatro hectares e foi subdividida em quatro subáreas contínuas e com o mesmo perímetro. As abelhas em flores e em vôo foram capturadas com auxílio de rede entomológica. Foram coletados 1.459 espécimes pertencentes a 122 espécies de abelhas. Estas espécies estão distribuídas em 51 gêneros, 20 tribos e cinco subfamílias. As plantas visitadas correspondem a 93 espécies, pertencentes a 62 gêneros e 29 famílias. Neste estudo e em outro estudo realizado anteriormente em outra área do Parque foram coletadas 222 espécies sendo 74 espécies em comum as duas áreas e uma soma de 148 espécies restritas a uma ou outra área. Ainda, registros históricos de abelhas para Vila Velha elevam a riqueza conhecida para 261 espécies. O índice de similaridade de Morisita entre as áreas foi de 0,50 quando utilizadas as plantas como variáveis e 0,88 quando utilizados gêneros e espécies de abelhas, revelando uma notável heterogeneidade. Comparações entre as áreas do Parque Estadual de Vila Velha e áreas de campos e cerrado foram realizadas através do índice de similaridade e da análise de correspondência. Foram observados dois agrupamentos fortemente evidentes, referentes aos campos e ao cerrado. A análise de correspondência sugere que alguns gêneros podem ser relacionados a determinadas formações vegetais. Esse estudo indica que a fauna de abelhas de Vila Velha é composta principalmente por gêneros relacionados às áreas de campos, porém com presença de elementos de cerrado.

Estádios de desenvolvimento dos órgãos reprodutivos dos machos de Panulirus echinatus Smith (Decapoda: Palinuridae)

Esta pesquisa caracteriza os estádios de desenvolvimento dos testículos e canais deferentes da lagosta Panulirus echinatus Smith, 1869 a partir da relação entre seus aspectos macroscópicos, microscópicos e a relação gonadossomática (RGS). Através de amostragem mensal (novembro de 1999 a outubro de 2000) foram capturados 1716 machos, empregando-se redes de espera de fundo. Retirou-se a região dorsal da carapaça para avaliação dos órgãos reprodutivos. Os testículos e canais deferentes foram dissecados, pesados, fixados em solução de Bouin e submetidos aos procedimentos histológicos. A análise microscópica dos órgãos reprodutivos foi avaliada pela presença ou ausência de espermatozóides nos testículos e canais deferentes. Esta, quando associada a macroscopia (mudança de cor, tamanho, diâmetro e desenvolvimento de espermatóforo) e a relação gonadossomática (RGS), possibilitou a caracterização de três estádios de desenvolvimento: imaturo, intermediário e maturo. Ficou evidenciada que a maturidade dos testículos precedeu a maturidade dos canais deferentes. Para avaliar se a RGS é um bom indicador quantitativo dos estádios de maturidade, um teste t (alfa = 0,05) foi usado e constatou diferença significativa nas médias da RGS. A RGS pode ser utilizada como indicadora dos estádios de maturidade para P. echinatus.

Capture fishery in northern Todos os Santos Bay, tropical southwestern Atlantic, Brazil

Information on marine and estuarine capture fishery activity in northern Todos os Santos Bay, northeastern Brazil, based on daily data collected between September 2003 and June 2005 is presented. Small-scale artisanal fishery in this area includes the use of traditional vessels both nonmotorized and motorized for locomotion, being carried out mainly by canoe or on foot, and involves many different kinds of gear, including gillnet, hook and line, seine nets, and traps. A total of 113 taxa were grouped into 77 resources, including 88 fish, 10 crustaceans, and 15 mollusks. Data on nominal catches of fish, crustaceans and mollusks are presented by month and location. A total of 345.2 tonnes of fishery resources were produced (285.4 tonnes of fish, 39.2 tonnes of fresh invertebrates, and 20.6 tonnes of processed invertebrates). Temporal variation in the fish catch was associated with the life cycle of the species or with the hydrographic conditions. The first-sale value of this catch amounted to around US$ 615,000.00, fishes representing 71.3% of it. A table of the average price of each fishery resource is presented. The results produced in this study may be considered a reference for future monitoring programs of fishery resources in the area.

The ichthyofauna of upper rio Capivari: defining conservation strategies based on the composition and distribution of fish species

Although the rio Capivari basin is recognized as an area of great importance for the ichthyofauna, it lacks virtually every basic requirement for the definition of appropriate conservation strategies, since not even its species composition is known. The objective of this work is to determine the composition and distribution of fish species in the upper rio Capivari basin, relating them to the local physical features, and to evaluate the effectiveness of proposed conservations units, delimited based on areas of native vegetation remains, on the conservation of local ichthyofauna. During 2007, 50 different watercourses were sampled with gillnets, cast nets and kick nets. A total of 1308 individuals belonging to 41 species were captured. Degree of conservation, altitude and width were the parameters that best explained fish species richness. Considering the recently proposed boundaries for potential conservation units in the region only 15 or 20 out of 41 species would be found in the State Park and Environmental Protection Area respectively. In practice, the proposed conservation units would not be effective tools for fish conservation, since it would be located in mountainous areas of high altitude, of headwaters streams and where few species are found. In such context, the conservation of specific stretches of larger rivers is critical.

As aves da Estação Ecológica Serra Geral do Tocantins, Centro do Brasil

A Estação Ecológica Serra Geral do Tocantins (EESGT) é uma das maiores Unidades de Conservação dentro do Bioma Cerrado. A avifauna desta UC foi inventariada entre os dias 25 de janeiro e 15 de fevereiro de 2008. Durante esse trabalho buscou-se amostrar os diferentes hábitats encontrados na EESGT, bem como algumas localidades no entorno. Além de registros auditivos e visuais foram utilizadas redes-de-neblina e armas de fogo para coletas de material testemunho, que se encontra depositado na coleção ornitológica do Museu de Zoologia da Universidade de São Paulo (MZUSP). Os resultados obtidos foram comparados com os dados disponíveis para outras unidades de conservação presentes na região. Foram registradas 254 espécies de aves, incluindo 11 endêmicas do Cerrado e outras três ameaçadas de extinção (Taoniscus nanus, Anodorhynchus hyacinthinus e Procnias averano). Três indivíduos pertencentes ao gênero Picumnus foram coletados; estes apresentam um distinto padrão de plumagem e de vocalização, podendo representar um táxon ainda não descrito.

Butterflies (Lepidoptera, Papilionoidea and Hesperioidea) of the "Baixada Santista" region, coastal São Paulo, southeastern Brazil

Butterflies (Lepidoptera, Papilionoidea and Hesperioidea) of the "Baixada Santista" region, coastal São Paulo, southeastern Brazil. A list with 538 species of butterflies recorded in the Baixada Santista, São Paulo ( SE Brazil) is presented. Standard sampling protocols (i.e. with entomological nets) were followed. Baited traps were installed for fruit feeding species. Data from the literature and entomological collections were also considered in the total estimated species richness. The species richness recorded in the Baixada Santista region represents about 16% of the Brazilian butterfly fauna, and 34% of the known butterfly fauna for the state of São Paulo. The present list contains an appreciably higher number of species in comparison to other lists from similar biomes farther south, such as Blumenau in Santa Catarina, and Maquiné in Rio Grande do Sul.

Qualidade de luz na biometria e anatomia foliar de plântulas de Cattleya loddigesii L. (Orchidaceae) micropropagadas

A qualidade de luz pode alterar a morfogênese das plantas por meio de uma série de processos mediados por receptores de luz, principalmente na região do vermelho e azul. O objetivo do presente estudo foi verificar alterações anatômicas foliares e características biométricas de Cattleya loddigesii 'Tipo', cultivadas in vitro, sob diferentes malhas coloridas com nível de radiação de 50% de sombreamento. Plântulas oriundas de autopolinização e sementes germinadas in vitro, com aproximadamente 1,0cm de comprimento e com raízes, foram inoculadas em meio WPM e submetidas a diferentes condições de incubação. Testou-se o efeito de sombrites coloridos (vermelho e azul) sobre os frascos cultivados em casa de vegetação (CV) e sala de crescimento (SC), além dos tratamentos, nos dois ambientes, sem utilização das telas coloridas. A avaliação foi efetuada 180 dias após inoculação. Com os resultados obtidos, observou-se que o ambiente de cultivo promove alterações anatômicas e biométricas em plântulas de Cattleya loddigesii 'Tipo' micropropagadas. As alterações promovidas pelo cultivo em luz natural evidenciam maior capacidade fotossintética, por meio de maior diferenciação dos tecidos clorofilianos, promovendo uma superfície foliar anatomicamente adaptada à fase de aclimatização.

Ecologia de Haemagogus e Sabethes (Diptera: Culicidae) em áreas epizoóticas do vírus da febre amarela, Rio Grande do Sul, Brasil

Objetivou-se com este estudo investigar característica ecológica e o hábito alimentar de Haemagogus e Sabethes em área epizoótica da febre amarela silvestre em duas localidades do Rio Grande do Sul, capturados com aspirador, armadilha de Shannon e puçá. Para identificação do sangue ingerido pelas fêmeas foi utilizada a técnica imunoenzimática ELISA de captura. Obteve-se maior atividade de Hg. leucocelaenus na primavera e outono, entre 12 e 17 horas, enquanto Sabethes albiprivus e Sa. quasycianus durante todo o ano. Para fêmeas de Hg. leucocelaenus em Santo Antônio das Missões, houve predomínio de sangue humano e para as demais espécies destaca-se a atratividade para bovinos nos dois municípios. A capacidade vetorial do Hg. leucocelaenus fundamenta vigilância entomológica em seu papel de estratificar áreas problemas ou a sustentabilidade do programa de imunização da população

Influence of Annealing Heat Treatment and Cr, Mg, and Ti Alloying on the Mechanical Properties of High-Silicon Cast Iron

The influence of annealing on the mechanical properties of high-silicon cast iron for three alloys with distinct chromium levels was investigated. Each alloy was melted either with or without the addition of Ti and Mg. These changes in the chemical composition and heat treatment aimed to improve the material's mechanical properties by inhibiting the formation of large columnar crystals, netlike laminae, precipitation of coarse packs of graphite, changing the length and morphology of graphite, and rounding the extremities of the flakes to minimize the stress concentration. For alloys with 0.07 wt.% Cr, the annealing reduced the impact resistance and tensile strength due to an enhanced precipitation of refined carbides and the formation of interdendritic complex nets. Annealing the alloys containing Ti and Mg led to a decrease in the mechanical strength and an increase in the toughness. Alloys containing approximately 2 wt.% Cr achieved better mechanical properties as compared to the original alloy. However, with the addition of Ti and Mg to alloys containing 2% Cr, the chromium carbide formation was inhibited, impairing the mechanical properties. In the third alloy, with 3.5 wt.% of Cr additions, the mechanical strength improved. The annealing promoted a decrease in both hardness and amount of iron and silicon complex carbides. However, it led to a chromium carbide formation, which influenced the mechanical characteristics of the matrix of the studied material.