Les Iroquoiens de Droulers/Tsiionhiakwatha et le cristal de quartz

Parmi la grande quantité de témoins culturels découverts sur le site Droulers/Tsiionhiakwatha (BgFn-1), la pierre taillée et polie forme un assemblage bien modeste. Les Iroquoiens de Droulers ont habité un village semi-permanent daté du Sylvicole supérieur, plus précisément entre l’an 1430 et 1500 ap. J.-C. Ils ont fabriqués des grattoirs, des pointes de flèches, des forets, des polissoirs et des meules à mains, en plus d’outils en quartz hyalin dont la fonction n’est pas bien définie. Parmi les 3595 objets lithiques, nous trouvons 18 outils et 1085 déchets de taille en cristal, ce qui représente près de 30% du total. Le quartz hyalin fut utilisé durant la préhistoire québécoise, mais jamais en aussi grande quantité que sur Droulers. Nous présentons la chaîne opératoire du quartz hyalin, de son extraction à son rejet sur les sites archéologiques. Nous explorons également son utilisation et sa symbolique chez les habitants du village Droulers, une enquête basée sur des données archéologiques et ethnographiques des Amérindiens actuels et de ceux de la période de Contact du nord-est de l’Amérique du nord.

Coût bioenergetique des modes de déplacements irréguliers en sport

The objective of this thesis was to quantify the physiological responses such as O2 uptake (VO2), heart rate (HR) and blood lactate ([LA]) to some types of activities associated with intermittent sports in athletes. Our hypothesis is that the introduction of accelerations and decelerations with or without directional changes results in a significative increase of the oxygen consumption, heart rate and blood lactate. The purpose of the first study was to measure and compare the VO2 and the HR of 6 on-court tennis drills at both high and low displacement speeds. These drills were done with and without striking the ball, over full and half-width court, in attack or in defense mode, using backhand or forehand strokes. Results show that playing an attacking style requires 6.5% more energy than playing a defensive style (p < 0.01) and the backhand stroke required 7% more VO2 at low speed than forehand stroke (p < 0.05) while the additional cost of striking the ball lies between 3.5 and 3.0 mL kg-1 min-1. Finally, while striking the ball, the energy expanded during a shuttle displacement on half-width court is 14% higher than running on full-width court. Studies #2 and #3 focused on different modes of displacement observed in irregular sports. The objective of the second study was to measure and compare VO2, HR and [LA] responses to randomly performed multiple fractioned runs with directional changes (SR) and without directional changes (FR) to those of in-line running (IR) at speeds corresponding to 60, 70 and 80% of the subject’s maximal aerobic speed (MAS). All results show that IR’s VO2 was significantly lower than SR’s and FR’s (p<0.05). SR’s VO2 was greater than FR’s only at speeds corresponding to 80%MAS. On the other hand, HR was similar in SR and FR but significantly higher than IR’s (p<0.05). [LA] varied between 4.2 ± 0.8 and 6.6 ± 0.9 mmol L-1 without significant differences between the 3 displacement modes. Finally, the third study’s objective was to measure and compare VO2 , HR and [LA] responses during directional changes at different angles and at different submaximal running speeds corresponding to 60, 70 and 80% MAS. Subjects randomly performed 4 running protocols 1) a 20-m shuttle running course (180°) (SR), 2) an 8-shaped running course with 90-degree turns every 20 m (90R), 3) a Zigzag running course (ZZR) with multiple close directional changes (~ 5 m) at different angle values of 91.8°, 90° and 38.6°, 4) an In-line run (IR) for comparison purposes. Results show that IR’s was lower (p<0.001) than for 90R’s, SR’s and ZZR’s at all intensities. VO2 obtained at 60 and 70%MAS was 48.7 and 38.1% higher during ZZR when compared to IR while and depending on the intensity, during 90R and SR was between 15.5 and 19.6% higher than during IR. Also, ZZR’s VO2 was 26.1 and 19.5% higher than 90R’s, 26.1 and 15.5% higher than SR’s at 60 and 70%MAS. SR’s and 90R’s VO2 were similar. Changing direction at a 90° angle and at 180° angle seem similar when compared to continuous in-line running. [LA] levels were similar in all modalities. Overall, the studies presented in this thesis allow the quantification of the specific energetic demands of certain types of displacement modes in comparison with conventional forward running. Also, our results confirm that the energy cost varies and increase with the introduction of accelerations and decelerations with and without directional changes.

Fliesslochformen und Gewindefurchen in dünne Bleche und Rohre aus Kupfer und Kupferlegierungen

This thesis in Thermal Flow Drilling and Flowtap in thin metal sheet and pipes of copper and copper alloys had as objectives to know the comportment of copper and copper alloys sheet metal during the Thermal Flow Drill processes with normal tools, to know the best Speed and Feed machine data for the best bushing quality, to known the best Speed for Form Tapping processes and to know the best bush long in pure copper pipes for water solar interchange equipment. Thermal Flow Drilling (TFD) and Form Tapping (FT) is one of the research lines of the Institute of Production and Logistics (IPL) at University of Kassel. At December 1995, a work meeting of IPL, Santa Catarina University, Brazil, Buenos Aires University, Argentine, Tarapacá University (UTA), Chile members and the CEO of Flowdrill B.V. was held in Brazil. The group decided that the Manufacturing Laboratory (ML) of UTA would work with pure copper and brass alloys sheet metal and pure copper pipes in order to develop a water interchange solar heater. The Flowdrill BV Company sent tools to Tarapacá University in 1996. In 1999 IPL and the ML carried out an ALECHILE research project promoted by the DAAD and CONICyT in copper sheet metal and copper pipes and sheet metal a-brass alloys. The normal tools are lobed, conical tungsten carbide tool. When rotated at high speed and pressed with high axial force into sheet metal or thin walled tube generated heat softens the metal and allows the drill to feed forward produce a hole and simultaneously form a bushing from the displacement material. In the market exist many features but in this thesis is used short and longs normal tools of TFD. For reach the objectives it was takes as references four qualities of the frayed end bushing, where the best one is the quality class I. It was used pure copper and a-brass alloys sheet metals, with different thickness. It was used different TFD drills diameter for four thread type, from M-5 to M10. Similar to the Aluminium sheet metals studies it was used the predrilling processes with HSS drills around 30% of the TFD diameter (1,5 – 3,0 mm D). In the next step is used only 2,0 mm thick metal sheet, and 9,2 mm TFD diameter for M-10 thread. For the case of pure commercial copper pipes is used for ¾” inch diameter and 12, 8 mm (3/8”) TFD drill for holes for 3/8” pipes and different normal HSS drills for predrilling processes. The chemical sheet metal characteristics were takes as reference for the material behaviour. The Chilean pure copper have 99,35% of Cu and 0,163% of Zinc and the Chilean a-brass alloys have 75,6% of Cu and 24,0% of Zinc. It is used two German a-brass alloys; Nº1 have 61,6% of Cu, 36,03 % of Zinc and 2,2% of Pb and the German a-brass alloys Nº2 have 63,1% of Cu, 36,7% of Zinc and 0% of Pb. The equipments used were a HAAS CNC milling machine centre, a Kistler dynamometer, PC Pentium II, Acquisition card, TESTPOINT and XAct software, 3D measurement machine, micro hardness, universal test machine, and metallographic microscope. During the test is obtained the feed force and momentum curves that shows the material behaviour with TFD processes. In general it is take three phases. It was possible obtain the best machining data for the different sheet of copper and a-brass alloys thick of Chilean materials and bush quality class I. In the case of a-brass alloys, the chemical components and the TFD processes temperature have big influence. The temperature reach to 400º Celsius during the TFD processes and the a-brass alloys have some percents of Zinc the bush quality is class I. But when the a-brass alloys have some percents of Lead who have 200º C melting point is not possible to obtain a bush, because the Lead gasify and the metallographic net broke. During the TFD processes the recrystallization structures occur around the Copper and a-brass alloy bush, who gives more hardness in these zones. When the threads were produce with Form Tapping processes with Flowtap tools, this hardness amount gives a high limit load of the thread when hey are tested in a special support that was developed for it. For eliminated the predrilling processes with normal HSS drills it was developed a compound tool. With this new tool it was possible obtain the best machining data for quality class I bush. For the copper pipes it is made bush without predrilling and the quality class IV was obtained. When it is was used predrilling processes, quality classes I bush were obtained. Then with different HSS drill diameter were obtained different long bush, where were soldering with four types soldering materials between pipes with 3/8” in a big one as ¾”. Those soldering unions were tested by traction test and all the 3/8” pipes broken, and the soldering zone doesn’t have any problem. Finally were developed different solar water interchange heaters and tested. As conclusions, the present Thesis shows that the Thermal Flow Drilling in thinner metal sheets of cooper and cooper alloys needs a predrilling process for frayed end quality class I bushings, similar to thinner sheets of aluminium bushes. The compound tool developed could obtain quality class I bushings and excludes predrilling processes. The bush recrystalization, product of the friction between the tool and the material, the hardness grows and it is advantageous for the Form Tapping. The methodology developed for commercial copper pipes permits to built water solar interchange heaters.

Georgia y Rusia: la identidad como factor delimitador de los intereses y políticas de ambos estados con sus efectos en la Guerra de Osetia del Sur en 2008

Esta monografía se centra en evaluar mediante un enfoque constructivista, y a partir de una serie de hechos históricos, cómo la identidad construida por Rusia y Georgia fue el detonante de la Guerra de Osetia del Sur en 2008. Para tal objetivo, se partirá del supuesto que este conflicto fue el resultado de las diferencias entre ambos actores que desarrollaron una serie de políticas antagónicas, enmarcadas en una cultura de anarquía hobbesiana la cual se configuró tras la Revolución de las Rosas y la posterior llegada de Mijaíl Saakashvili al poder, puesto que Georgia se convertiría en el principal aliado de occidente en el Cáucaso, basado en un rol anti ruso y disidente de la influencia del Kremlin en la zona, divergiendo con el liderazgo de Rusia el cual se fundamenta en una identidad construida a raíz de su pasado imperial y hegemónico.

An octree isosurface codification based on discrete planes

Describes a method to code a decimated model of an isosurface on an octree representation while maintaining volume data if it is needed. The proposed technique is based on grouping the marching cubes (MC) patterns into five configurations according the topology and the number of planes of the surface that are contained in a cell. Moreover, the discrete number of planes on which the surface lays is fixed. Starting from a complete volume octree, with the isosurface codified at terminal nodes according to the new configuration, a bottom-up strategy is taken for merging cells. Such a strategy allows one to implicitly represent co-planar faces in the upper octree levels without introducing any error. At the end of this merging process, when it is required, a reconstruction strategy is applied to generate the surface contained in the octree intersected leaves. Some examples with medical data demonstrate that a reduction of up to 50% in the number of polygons can be achieved

Elementos-Chave para a Gestão Eficaz da Emergência num Complexo Educativo

Planos de emergência bem sucedidos devem ser funcionais, realistas, amigos do utilizador e inteligíveis. Este estudo descritivo tem como objetivo analisar a implementação de Medidas de Autoproteção (que passou a ser obrigatória, em Portugal, desde 2009) durante um período de cinco anos, num grande complexo escolar ocupado por 500 funcionários e 3000 crianças/alunos. Este estabelecimento de ensino consiste em vários edifícios desde a creche ao ensino secundário e está classificado numa categoria de risco de incêndio muito elevada. Desde 2009 até 2012 foram realizadas sessões de formação destinadas aos alunos e funcionários, bem como ações de formação sobre combate a incêndios e evacuação para as equipas de segurança. Como os exercícios de evacuação são cruciais para testar o plano de emergência e familiarizar o pessoal com as tarefas, todos os anos são realizados Simulacros de Incêndio. A fim de avaliar a sua eficácia foram recolhidos dados através de observação não participante, fotos e vídeos. A gestão de emergência neste estabelecimento escolar evidenciou ir para além das exigências legais e, ao dar um bom exemplo, tanto na escola como na comunidade, contribuiu para aumentar a segurança dos alunos e das suas famílias. / Successful emergency plans must be functional, realistic, user-friendly and understandable. This descriptive study aims to analyse the implementation of Fire Self-Protection Measures (which became mandatory, in Portugal, since 2009) during a five-year period in a large school compound occupied by 500 employees and 3000 children/students. This educational facility consists of several buildings from nursery school to high school and it’s classified in a very high fire risk category. Since 2009 until 2012 we carried out training sessions for students and school staff, as well as training courses about fire fighting and evacuation, for safety teams. Because evacuation drills are crucial for testing the emergency plan and to familiarize personnel with tasks, each year we do properly conducted fire drills. In order to evaluate it’s effectiveness, we collected data through non-participant observation, photos and videos. The school emergency management has proven to go beyond the legal requirements and by setting a good example both in school and community, it enhances the safety of students and their families.

Twelve sequence stories for use as part of reading curriculum for deaf children

This paper discusses the use of sight vocabulary drills, experience and sequence stories, pre-primers, basal readers and text books as part of a reading curriculum for hearing-impaired children.

A shock capturing scheme for steady, supercritical, free-surface flow

Abstract A finite difference scheme is presented for the solution of the two-dimensional shallow water equations in steady, supercritical flow. The scheme incorporates numerical characteristic decomposition, is shock capturing by design and incorporates space-marching as a result of the assumption that the flow is wholly supercritical in at least one space dimension. Results are shown for problems involving oblique hydraulic jumps and reflection from a wall.

Shock capturing scheme for steady, supersonic, isentropic flow

A finite difference scheme is presented for the solution of the two-dimensional equations of steady, supersonic, isentropic flow. The scheme incorporates numerical characteristic decomposition, is shock-capturing by design and incorporates space marching as a result of the assumption that the flow is wholly supersonic in at least one space dimension. Results are shown for problems involving oblique hydraulic jumps and reflection from a wall.

A finite difference scheme for steady, supersonic, two-dimensional, compressible flow of real gases

A finite difference scheme is presented for the solution of the two-dimensional equations of steady, supersonic, compressible flow of real gases. The scheme incorparates numerical characteristic decomposition, is shock-capturing by design and incorporates space-marching as a result of the assumption that the flow is wholly supersonic in at least one space dimension. Results are shown for problems involving oblique hydraulic jumps and reflection from a wall.

Haptics in medicine and clinical skill acquisition

THE clinical skills of medical professionals rely strongly on the sense of touch, combined with anatomical and diagnostic knowledge. Haptic exploratory procedures allow the expert to detect anomalies via gross and fine palpation, squeezing, and contour following. Haptic feedback is also key to medical interventions, for example when an anaesthetist inserts an epidural needle, a surgeon makes an incision, a dental surgeon drills into a carious lesion, or a veterinarian sutures a wound. Yet, current trends in medical technology and training methods involve less haptic feedback to clinicians and trainees. For example, minimally invasive surgery removes the direct contact between the patient and clinician that gives rise to natural haptic feedback, and furthermore introduces scaling and rotational transforms that confuse the relationship between movements of the hand and the surgical site. Similarly, it is thought that computer-based medical simulation and training systems require high-resolution and realistic haptic feedback to the trainee for significant training transfer to occur. The science and technology of haptics thus has great potential to affect the performance of medical procedures and learning of clinical skills. This special section is about understanding

Verifiable Visualization for Isosurface Extraction

Visual representations of isosurfaces are ubiquitous in the scientific and engineering literature. In this paper, we present techniques to assess the behavior of isosurface extraction codes. Where applicable, these techniques allow us to distinguish whether anomalies in isosurface features can be attributed to the underlying physical process or to artifacts from the extraction process. Such scientific scrutiny is at the heart of verifiable visualization - subjecting visualization algorithms to the same verification process that is used in other components of the scientific pipeline. More concretely, we derive formulas for the expected order of accuracy (or convergence rate) of several isosurface features, and compare them to experimentally observed results in the selected codes. This technique is practical: in two cases, it exposed actual problems in implementations. We provide the reader with the range of responses they can expect to encounter with isosurface techniques, both under ""normal operating conditions"" and also under adverse conditions. Armed with this information - the results of the verification process - practitioners can judiciously select the isosurface extraction technique appropriate for their problem of interest, and have confidence in its behavior.

Refraction corrected transmission ultrasound computed tomography for application in breast imaging

Purpose: We present an iterative framework for CT reconstruction from transmission ultrasound data which accurately and efficiently models the strong refraction effects that occur in our target application: Imaging the female breast. Methods: Our refractive ray tracing framework has its foundation in the fast marching method (FNMM) and it allows an accurate as well as efficient modeling of curved rays. We also describe a novel regularization scheme that yields further significant reconstruction quality improvements. A final contribution is the development of a realistic anthropomorphic digital breast phantom based on the NIH Visible Female data set. Results: Our system is able to resolve very fine details even in the presence of significant noise, and it reconstructs both sound speed and attenuation data. Excellent correspondence with a traditional, but significantly more computationally expensive wave equation solver is achieved. Conclusions: Apart from the accurate modeling of curved rays, decisive factors have also been our regularization scheme and the high-quality interpolation filter we have used. An added benefit of our framework is that it accelerates well on GPUs where we have shown that clinical 3D reconstruction speeds on the order of minutes are possible.

Um século de tradição: a banda de música do Colégio Salesiano de Santa Rosa (1888-1988)

A música nos colégios salesianos sempre ocupou um lugar de destaque, pois na pedagogiade Dom Bosco é considerada importante fator educativo, devido a seu grande poder deinfluência no espírito dos jovens. Para Dom Bosco, uma escola sem música é um corposem alma , afirmação que explicita o valor pedagógico da música. Ainda segundo ele, aalegria é o elemento básico da educação, e a música expressa esse estado da alma. Estetrabalho visa valorizar a Banda de Música do Colégio Salesiano Santa Rosa, de Niterói,RJ, em sua trajetória de mais de 100 anos de atividade ininterrupta, e resgatar umamemória que tende a se perder. A banda sempre esteve à frente das festas cívicas,contagiando o público com marchas e hinos patrióticos, comandando desfiles escolares,impondo sua cadência e expressando através da música o sentimento de sua comunidade.Esta pesquisa surgiu da observação de que os trabalhos sobre bandas tinham como pontoprincipal a questão do ensino musical, mas não o valor pedagógico da música. Tambémnada havia sido escrito sobre a Banda de Música do Colégio Salesiano Santa Rosa. Assim,por meio da documentação histórica e da memória como suportes de reconstrução dahistória dessa banda secular, este trabalho lança um novo olhar sobre o tema.

Estabelecimentos isolados de ensino superior: um estudo das fundações educacionais de SC

Este estudo centra-se na análise das Instituições Isoladas de Ensino Superior. O universo da análise são as Fundações Educacionais de Santa Catarina e suas unidades de ensino superior. Estas Fundações, instituídas pelos poderes públicos Estadual e Municipais, foram responsáveis pelo processo de interiorização e regionalização do ensino superior em Santa Catarina, detendo, à época da pesquisa, mais de 2/3 do alunado deste nível de ensino. A legislação sobre o ensino superior, vigente em nosso País, adota a Universidade como norma e o Estabelecimento Isolado como exceção. Mas a exceção, segundo a lei, estatisticamente, ocupa posição modal. A Universidade e o Estabelecimento Isolado são realidades distintas e, normalmente, situadas em ambientes diferentes. Se diferente é a realidade de ambas não se pode enquadrá-las no mesmo "figurino" conceptual. O Estabelecimento Isolado de Ensino Superior deve buscar sua identidade institucional, sua vocação. Na busca da identidade dos Estabelecimentos Isolados de Ensino Superior, é analisada a experiência de Santa Catarina, através de suas Fundações Educacionais. A análise aborda essas instituições sob três aspectos: seus objetivos, sua estrutura organizacional e as formas de interação com o meio ambiente. A análise dos objetivos situa-se numa tríplice dimensão: os fins e funções do Ensino Superior, preconizados pela Lei, os fins e funções das Fundações Educacionais e suas unidades de ensino, expressos em seus documentos legais, e os resultados alcançados por estas instituições. Tanto na análise dos objetivos propostos, como dos resultados alcançados, são enfocados os três tipos de participantes: o pessoal docente admi-nistrativo das Instituições, os alunos e as comunidades a que servem. Estabelecem-se relações entre os objetivos propostos frente aos alcançados e as aspirações do pessoal docente-administrativo frente às dos alunos e comunidades, visando avaliar a coerência entre o proposto e o alcançado e a discrepância dos objetivos dos participantes. Para explicar a falta de coerência encontrada entre objetivos e resultados, são analisadas a estrutura formal e as práticas administrativas das instituições. Parte-se do pressuposto de que estruturas formais sofisticadas, além de complexidade da organização, geram "formalismos", entendidos como a discrepância entre o prescrito e os comportamentos. Os " formalismos" tendem a explicar a falta de coerência entre o proposto e o alcançado, no campo dos objetivos. Os dados mostram existir relação entre tipo de estrutura (formal-concreto) e coerência de objetivos com resultados. Para explicar as discrepâncias dos objetivos dos participantes, são analisadas as interações com o ambiente, entendidas como a atuação das IES sobre o meio e deste sobre aquelas, em termos de "trocas". Encontra-se, aqui, também, relação entre as variáveis analisadas. Os dados obtidos levam a conclusões no sentido da busca de vocação própria, da especificidade das Instituições Isoladas do Ensino Superior. São levantadas alternativas de ação, na busca da identidade das IES isoladas, propondo novos e mais aprofundados estudos sobre o assunto.