Corporations and corporate governance: what do these concepts mean for multinational corporate power and social responsibility?

International Journal of Liability and Scientific Enquiry 2007 - Vol. 1, No.1/2 pp. 29 - 49 RAE2008

Behaviour and rationality in corporate governance

Marnet, Oliver, 'Behaviour and rationality in corporate governance', Journal of Economic Issues (2005) 39(3) pp.613-632 RAE2008

Impact of Islamic values on HRM practices: an empirical study of Jordanian universities

Purpose This study aims to present an in-depth theoretical and practical analysis of HRM practice in the light of Islamic values and principles. It looks at the four main HRM functions of recruitment and selection, training and development, performance appraisal, and rewards, from the Islamic perspective. Besides establishing a theoretical base for the influence of Islam on HRM, it analyses the key characteristics of HRM practice as applied in Jordanian universities and analyses the extent to which Islamic values are embedded in that practice. Design/methodology/approach The paper draws on a structured questionnaire distributed to 500 respondents working in four Jordanian universities which sought to elicit the respondents views on the influence of Islamic values within specific HR functions. Findings The findings indicate that there is a diffusion of Islamic values into HRM practice in the participating organisations. The extent of the diffusion varies between the organisations; there is a clear indication that explicitly Islamic values are being practiced, albeit to a limited extent. Originality/value The role of spirituality and/or religion in shaping the working of contemporary organisations is not sufficiently recognised in the literature. This paper is a response to the limited number of research studies assessing the extent of the absorption of religious values into the management of human resources. The study undertaken examines the current status of HRM practice in Jordanian universities and contributes to deepening the contemporary understanding of interactions between Islamic values and the core HR functions.

The mechanical and thermal structure of Mercury's early lithosphere

Cook, Anthony; Watters, T.R.; Schultz, R.A.; Robinson, M.S., (2002) 'The mechanical and thermal structure of Mercury's early lithosphere', Geophysical Research Letters 29(11) pp.1542 RAE2008

Discovering Clusters in Motion Time-Series Data

A new approach is proposed for clustering time-series data. The approach can be used to discover groupings of similar object motions that were observed in a video collection. A finite mixture of hidden Markov models (HMMs) is fitted to the motion data using the expectation-maximization (EM) framework. Previous approaches for HMM-based clustering employ a k-means formulation, where each sequence is assigned to only a single HMM. In contrast, the formulation presented in this paper allows each sequence to belong to more than a single HMM with some probability, and the hard decision about the sequence class membership can be deferred until a later time when such a decision is required. Experiments with simulated data demonstrate the benefit of using this EM-based approach when there is more "overlap" in the processes generating the data. Experiments with real data show the promising potential of HMM-based motion clustering in a number of applications.

Proteomic approach to oxidative stress in Daphnia magna

The keystone aquatic organism Daphnia magna is extensively used to assess the toxicity of chemicals. This has recently lead to an increase in the omics literature focusing on daphnids, an increase fuelled by the sequencing of the Daphnia pulex genome. Yet, no omics study has looked directly at oxidative stress (OS) in daphnids, even though OS is of primary importance in the response of aquatic organisms to their changing environment and is often induced by anthropogenic xenobiotics. This thesis thus focuses on the application of redox-proteomics, the study of the oxidative modification of proteins, to D. magna Specifically, daphnids were exposed to copper or paraquat, two well studied prooxidants, and protein carbonyls were labelled with fluorescein-5-thiosemicarbazide prior to twodimensional electrophoresis (2DE). This showed clearly that both compounds affect a different portion of the proteome. The identified proteins indicated that energy metabolism was affected by paraquat, while copper induced a reduction of the heat shock response (heat shock proteins, proteases and chaperones) a counterintuitive result which may be adaptative to metal toxicity in arthropods. The same approach was then applied to the study of the toxicity mechanism of silver nanoparticles (AgNP), an increasingly utilised form of silver with expected environmental toxicity, and its comparison to silver nitrate. The results demonstrate that, although less toxic than silver ions, AgNP toxicity functions through a different mechanism. AgNP toxicity is thus not a product of silver dissolution and increased protein carbonylation indicates that AgNP cause OS. Interestingly three of the four tested compounds altered vitellogenin levels and oxidation. Vitellogenins could thus represent an interesting subproteome for the detection of stress in daphnids. Finally, an experiment with oxidised BSA demonstrates the applicability of solid phase hydrazide in the enrichment of undigested carbonylated proteins.

Plate-specific gain map correction for the improvement of detective quantum efficiency in computed radiography.

PURPOSE: The purpose of this work is to improve the noise power spectrum (NPS), and thus the detective quantum efficiency (DQE), of computed radiography (CR) images by correcting for spatial gain variations specific to individual imaging plates. CR devices have not traditionally employed gain-map corrections, unlike the case with flat-panel detectors, because of the multiplicity of plates used with each reader. The lack of gain-map correction has limited the DQE(f) at higher exposures with CR. This current work describes a feasible solution to generating plate-specific gain maps. METHODS: Ten high-exposure open field images were taken with an RQA5 spectrum, using a sixth generation CR plate suspended in air without a cassette. Image values were converted to exposure, the plates registered using fiducial dots on the plate, the ten images averaged, and then high-pass filtered to remove low frequency contributions from field inhomogeneity. A gain-map was then produced by converting all pixel values in the average into fractions with mean of one. The resultant gain-map of the plate was used to normalize subsequent single images to correct for spatial gain fluctuation. To validate performance, the normalized NPS (NNPS) for all images was calculated both with and without the gain-map correction. Variations in the quality of correction due to exposure levels, beam voltage/spectrum, CR reader used, and registration were investigated. RESULTS: The NNPS with plate-specific gain-map correction showed improvement over the noncorrected case over the range of frequencies from 0.15 to 2.5 mm(-1). At high exposure (40 mR), NNPS was 50%-90% better with gain-map correction than without. A small further improvement in NNPS was seen from carefully registering the gain-map with subsequent images using small fiducial dots, because of slight misregistration during scanning. Further improvement was seen in the NNPS from scaling the gain map about the mean to account for different beam spectra. CONCLUSIONS: This study demonstrates that a simple gain-map can be used to correct for the fixed-pattern noise in a given plate and thus improve the DQE of CR imaging. Such a method could easily be implemented by manufacturers because each plate has a unique bar code and the gain-map for all plates associated with a reader could be stored for future retrieval. These experiments indicated that an improvement in NPS (and hence, DQE) is possible, depending on exposure level, over a wide range of frequencies with this technique.

Liquid metal induction heating modelling for cold crucible applications

The time dependent numerical model of cold crucible melting is based on the coupled electromagnetic, temperature and turbulent velocity field calculation accounting for the magnetically confined liquid metal shape continuous change. The model is applied to investigate the process energy efficiency dependence on the critical choice of AC power supply frequency and an optional addition of a DC magnetic field. Test cases of the metal load up to 50 kg are considered. The behaviour of the numerical model at high AC frequencies is instructively validated by the use of the electromagnetic analytical solution for a sphere and temperature measurements in a commercial size cold crucible furnace

Pseudo-spectral solutions for fluid flow and heat transfer in electro-metallurgical applications

The pseudo-spectral solution method offers a flexible and fast alternative to the more usual finite element and volume methods, particularly when the long-time transient behaviour of a system is of interest. The exact solution is obtained at grid collocation points leading to superior accuracy on modest grids. Furthermore, the grid can be freely adapted in time and space to particular flow conditions or geometric variations, especially useful where strongly coupled, time-dependent, multi-physics solutions are investigated. Examples include metallurgical applications involving the interaction of electromagnetic fields and conducting liquids with a free surface. The electromagnetic field determines the instantaneous liquid volume shape, which then affects the electromagnetic field. A general methodology of the pseudo-spectral approach is presented, with several instructive example applications: the aluminium electrolysis MHD problem, induction melting in a cold crucible and the dynamics of AC/DC magnetically levitated droplets. Finally, comparisons with available analytical solutions and to experimental measurements are discussed.

The completeness and soundness of temporal theories

Generally speaking, the term temporal logic refers to any system of rules and symbolism for representing and reasoning about propositions qualified in terms of time. In computer science, particularly in the domain of Artificial Intelligence, there are mainly two known approaches to the representation of temporal information: modal logic approaches including tense logic and hybrid temporal logic, and predicate logic approaches including temporal arguement method and reified temporal logic. On one hand, while tense logic, hybrid temporal logic and temporal argument method enjoy formal theoretical foundations, their expressiveness has been criticised as not power enough for representing general temporal knowledge; on the other hand, although reified temporal logic provides greater expressive power, most of the current systems following the temporal reification lack of complete and sound axiomatic theories. With there observations in mind, a new reified temporal logic with clear syntax and semantics in terms of a sound and complete axiomatic formalism is introduced in this paper, which retains all the expressive power of temporal reification.

A critical evaluation of Enterprise Resource Planning (ERP) software sourcing and provision using theoretical constructs

Deliberating on Enterprise Resource Planning (ERP) software sourcing and provision, this paper contrasts the corporate environment with the small business environment. The paper is about Enterprise Resource Planning client (ERPc) expectations and Enterprise Resource Planning vendor (ERPv) value propositions as a mutually compatible process for achieving acceptable standards of ERP software performance. It is suggested that a less-than-equitable vendor–client relationship would not contribute to the implementation of the optimum solution. Adapting selected theoretical concepts and models, the researchers analyse ERPv to ERPc relationship. This analysis is designed to discover if the provision of the very large ERP vendors who market systems such as SAP, and the provision of the smaller ERP vendors (in this instance Eshbel Technologies Ltd who market an ERP software solution called Priority) when framed as a value proposition (Walters, D. (2002) Operations Strategy. Hampshire, UK: Palgrave), is at all comparable or distinctive.