Biological management of the invasive Vachellia nilotica ssp. indica (Benth.) Kyal. & Boatwr. (Fabales: Mimosoideae) in tropical Australia: stress-inducing potential of Anomalococcus indicus Ramakrishna (Insecta: Hemiptera: Coccoidea: Lecanodiaspididae), an agent of promise

Vachellia nilotica ssp. indica (hereafter, V. n. indica) is an important tree weed in Australia. Its dense populations induce undesirable changes in the vast areas of northern Australia. Because chemical and mechanical management options appear unviable for various reasons, biological management of this tree is considered a better option. Among the many trialled arthropods in Australian context, Anomalococcus indicus, a lecanodiaspid native to India, has been identified as a potent-candidate, since in India, its native terrain, it is the most widespread and occurs throughout the year. Severe infestations of A. indicus cause defoliation, wilting and death of branches, and occasionally the tree. Populations of A. indicus have been brought into Australia and are being tested for its host specificity under quarantine conditions. This article reports the physiological damage and stress it inflicts in the shoots of V. n. indica. Younger-nymphal instars of A. indicus feed on cortical-parenchyma cells of young stems, whereas the older instars and adults feed from the phloem of old stems. Two conspicuous responses of V. n. indica arising in response to the feeding action of A. indicus are changes in the cell-wall dynamics and irregular cell divisions. The feeding action of A. indicus elicits a sequence of reactions in the stem tissues of V. n. indica such as differentiation of thick-walled elements in the outer cortical parenchyma, differential thickening of cells with supernumerary layers of either suberin or lignin, proliferations of parenchyma and phloem, wall thickening and obliteration of inner lumen of phloem cells, and the sieve plates plugged with callosic deposits. The responses are the culminations of interaction between the virulence factor (one or more of the salivary proteins?) from A. indicus and the resistance factor in V. n. indica. We have analysed structural changes in the context of their functions, by comparing the feeding action of A. indicus with that of other hemipteroids. From the level of stress it induces, this study confirms that A. indicus has the potential to be an effective biological management of V. n. indica in Australia. © 2014 © 2014 Taylor & Francis and Aboricultural Association.

Spirulina (Spirulina platensis) algae supplementation increases microbial protein production and feed intake and decreases retention time of digesta in the rumen of cattle

Cattle consuming pastures low in protein have low liveweight gain due to low rumen degradable protein (RDP) supply and thus low microbial crude protein (MCP) production and efficiency of MCP production [EMCP, g MCP/kg digestible organic matter (DOM)]. Nitrogen supplements can increase MCP production and EMCP of cattle grazing low protein pastures. The objective of this study was to compare the effects of supplementation with a non-protein-N source (NPN), in this case urea and ammonium sulfate (US), with a single-cell algal protein source (Spirulina platensis), on intake, microbial protein supply and digestibility in cattle. Nine cannulated Bos indicus steers [initial liveweight 250.1 ± 10.86 (s.d.) kg] were fed Mitchell grass hay (Astrebla spp; 6.1 g N, 746 g NDF/kg DM) ad libitum and were supplied with increasing amounts of US (0, 6, 13, 19 and 33 g US DM/kg hay DM) or Spirulina 0, 0.5, 1.4, 2.5 and 6.1 g Spirulina DM/kg W.day in an incomplete Latin square design. The response of MCP production and EMCP to increasing amounts of the two supplements was different, with a greater response to Spirulina evident. The MCP production was predicted to peak at 140 and 568 g MCP/day (0.64 and 2.02 g MCP/kg W.day) for the US and Spirulina supplements, respectively. The highest measured EMCP were 92 and 166 g MCP/kg DOM for the US and Spirulina treatments at 170 and 290 g RDP/kg DOM, respectively, or a Spirulina intake of 5.7 g DM/kg W.day. Increasing RDP intake from US and Spirulina resulted in an increase in Mitchell grass hay intake and rumen NH3-N concentration and reduced the retention time of liquid and particulate markers and digesta DM, NDF and lignin in the rumen with greater changes due to Spirulina. Total DM intake peaked at a Spirulina supplement level of 4.6 g Spirulina DM/kg W.day with a 2.3-fold higher DOM intake than Control steers. Rumen NH3-N concentrations reached 128 and 264 mg NH3-N/L for the US and Spirulina treatments with a significant increase in the concentration of branched-chain fatty acids for the Spirulina treatment. The minimum retention time of liquid (Cr-EDTA; 23 and 13 h) and particulate (Yb; 34 and 22 h) markers in the rumen were significantly lower for Spirulina compared with US and lower than unsupplemented animals at 24 and 34 h for Cr-EDTA and Yb, respectively. Spirulina could be provided safely at much higher N intakes than NPN supplements. The results suggest that, at an equivalent RDP supply, Spirulina provided greater increases than US in MCP production, EMCP and feed intake of Bos indicus cattle consuming low protein forage and could also be fed safely at higher levels of N intake.

Genome-wide association analysis and differential expression analysis of resistance to Sclerotinia stem rot in Brassica napus

Brassica napus is one of the most important oil crops in the world, and stem rot caused by the fungus Sclerotinia sclerotiorum results in major losses in yield and quality. To elucidate resistance genes and pathogenesis-related genes, genome-wide association analysis of 347 accessions was performed using the Illumina 60K Brassica SNP (single nucleotide polymorphism) array. In addition, the detached stem inoculation assay was used to select five highly resistant (R) and susceptible (S) B. napus lines, 48 h postinoculation with S. sclerotiorum for transcriptome sequencing. We identified 17 significant associations for stem resistance on chromosomes A8 and C6, five of which were on A8 and 12 on C6. The SNPs identified on A8 were located in a 409-kb haplotype block, and those on C6 were consistent with previous QTL mapping efforts. Transcriptome analysis suggested that S. sclerotiorum infection activates the immune system, sulphur metabolism, especially glutathione (GSH) and glucosinolates in both R and S genotypes. Genes found to be specific to the R genotype related to the jasmonic acid pathway, lignin biosynthesis, defence response, signal transduction and encoding transcription factors. Twenty-four genes were identified in both the SNP-trait association and transcriptome sequencing analyses, including a tau class glutathione S-transferase (GSTU) gene cluster. This study provides useful insight into the molecular mechanisms underlying the plant's response to S. sclerotiorum.

Peroxidases in lignifying xylem of Norway spruce, Scots pine and silver birch

Lignin is a complex plant polymer synthesized through co-operation of multiple intracellular and extracellular enzymes. It is deposited to plant cell walls in cells where additional strength or stiffness are needed, such as in tracheary elements (TEs) in xylem, supporting sclerenchymal tissues and at the sites of wounding. Class III peroxidases (POXs) are secreted plant oxidoreductases with implications in many physiological processes such as the polymerization of lignin and suberin and auxin catabolism. POXs are able to oxidize various substrates in the presence of hydrogen peroxide, including lignin monomers, monolignols, thus enabling the monolignol polymerization to lignin by radical coupling. Trees produce large amounts of lignin in secondary xylem of stems, branches and roots. In this study, POXs of gymnosperm and angiosperm trees were studied in order to find POXs which are able to participate in lignin polymerization in developing secondary xylem i.e. are located at the site of lignin synthesis in tree stems and have the ability to oxidize monolignol substrates. Both in the gymnosperm species, Norway spruce and Scots pine, and in the angiosperm species silver birch the monolignol oxidizing POX activities originating from multiple POX isoforms were present in lignifying secondary xylem in stems during the period of annual growth. Most of the partially purified POXs from Norway spruce and silver birch xylem had highest oxidation rate with coniferyl alcohol, the main monomer in guaiacyl-lignin in conifers. The only exception was the most anionic POX fraction from silver birch, which clearly preferred sinapyl alcohol, the lignin monomer needed in the synthesis of syringyl-guaiacyl lignin in angiosperm trees. Three full-length pox cDNAs px1, px2 and px3 were cloned from the developing xylem of Norway spruce. It was shown that px1 and px2 are expressed in developing tracheids in spruce seedlings, whereas px3 transcripts were not detected suggesting low transcription level in young trees. The amino acid sequences of PX1, PX2 and PX3 were less than 60% identical to each other but showed up to 84% identity to other known POXs. They all begin with predicted N-terminal secretion signal (SS) peptides. PX2 and PX3 contained additional putative vacuolar localization determinants (VSDs) at C-terminus. Transient expression of EGFP-fusions of the SS- and VSD-peptides in tobacco protoplasts showed SS-peptides directed EGFP to secretion in tobacco cells, whereas only the PX2 C-terminal peptide seems to be a functional VSD. According to heterologous expression of px1 in Catharanthus roseus hairy roots, PX1 is a guaicol-oxidizing POX with isoelectric point (pI) approximately 10, similar to monolignol oxidizing POXs in protein extracts from Norway spruce lignifying xylem. Hence, PX1 has characteristics for participation to monolignol dehydrogenation in lignin synthesis, whereas the other two spruce POXs seem to have some other functions. Interesting topics in future include functional characterization of syringyl compound oxidizing POXs and components of POX activity regulation in trees.

Effect of pretreatment on the formation of 5-chloromethyl furfural derived from sugarcane bagasse

Chloromethylfurfural (CMF), a valuable intermediate for the production of chemicals and fuel, can be derived in high yields from the cellulose component of biomass. This study examined the effect of sugar cane bagasse components and biomass architecture on CMF/bio-oil yield using a HCl/dichloroethane biphasic system. The type of pretreatment affected bio-oil yield, as the CMF yield increased with increasing glucan content. CMF yield reached 81.9% with bagasse pretreated by acidified aqueous ionic liquid, which had a glucan content of 81.6%. The lignin content of the biomass was found to significantly reduce CMF yield, which was only 62.3% with acid-catalysed steam exploded sample having a lignin content of 29.6%. The change of CMF yield may be associated with fibre surface changes as a result of pretreatment. The hemicellulose content also impacted negatively on CMF yield. Storage of the bio-oil in chlorinated solvents prevented CMF degradation.

Two ex situ fungal technologies to treat contaminated soil

Wood-degrading fungi are able to degrade a large range of recalcitrant pollutants which resemble the lignin biopolymer. This ability is attributed to the production of lignin-modifying enzymes, which are extracellular and non-specific. Despite the potential of fungi in bioremediation, there is still an understanding gap in terms of the technology. In this thesis, the feasibility of two ex situ fungal bioremediation methods to treat contaminated soil was evaluated. Treatment of polycyclic aromatic hydrocarbons (PAHs)-contaminated marsh soil was studied in a stirred slurry-phase reactor. Due to the salt content in marsh soil, fungi were screened for their halotolerance, and the white-rot fungi Lentinus tigrinus, Irpex lacteus and Bjerkandera adusta were selected for further studies. These fungi degraded 40 - 60% of a PAH mixture (phenanthrene, fluoranthene, pyrene and chrysene) in a slurry-phase reactor (100 ml) during 30 days of incubation. Thereafter, B. adusta was selected to scale-up and optimize the process in a 5 L reactor. Maximum degradation of dibenzothiophene (93%), fluoranthene (82%), pyrene (81%) and chrysene (83%) was achieved with the free mycelium inoculum of the highest initial biomass (2.2 g/l). In autoclaved soil, MnP was the most important enzyme involved in PAH degradation. In non-sterile soil, endogenous soil microbes together with B. adusta also degraded the PAHs extensively, suggesting a synergic action between soil microbes and the fungus. A fungal solid-phase cultivation method to pretreat contaminated sawmill soil with high organic matter content was developed to enhance the effectiveness of the subsequent soil combustion. In a preliminary screening of 146 fungal strains, 28 out of 52 fungi, which extensively colonized non-sterile contaminated soil, were litter-decomposing fungi. The 18 strains further selected were characterized by their production of lignin-modifying and hydrolytic enzymes, of which MnP and endo-1,4-β-glucanase were the main enzymes during cultivation on Scots pine (Pinus sylvestris) bark. Of the six fungi selected for further tests, Gymnopilus luteofolius, Phanerochaete velutina, and Stropharia rugosoannulata were the most active soil organic matter degraders. The results showed that a six-month pretreatment of sawmill soil would result in a 3.5 - 9.5% loss of organic matter, depending on the fungus applied. The pretreatment process was scaled-up for a 0.56 m3 reactor, in which perforated plastic tubes filled with S. rugosoannulata growing on pine bark were introduced into the soil. The fungal pretreatment resulted in a soil mass loss of 30.5 kg, which represents 10% of the original soil mass (308 kg). Despite the fact that Scots pine bark contains several antimicrobial compounds, it was a suitable substrate for fungal growth and promoter of the production of oxidative enzymes, as well as an excellent and cheap natural carrier of fungal mycelium. This thesis successfully developed two novel fungal ex situ bioremediation technologies and introduce new insights for their further full-scale application. Ex situ slurry-phase fungal reactors might be applied in cases when the soil has a high water content or when the contaminant bioavailability is low; for example, in wastewater treatment plants to remove pharmaceutical residues. Fungal solid-phase bioremediation is a promising remediation technology to ex situ or in situ treat contaminated soil.

European aspen and hybrid aspen under changing environment : Leaf traits, growth and litter decomposition

Understanding the responses of species and ecosystems to human-induced global environmental change has become a high research priority. The main aim of this thesis was to investigate how certain environmental factors that relate to global change affect European aspen (Populus tremula), a keystone species in boreal forests, and hybrid aspen (P. tremula × P. tremuloides), cultivated in commercial plantations. The main points under consideration were the acclimatization potential of aspen through changes in leaf morphology, as well as effects on growth, leaf litter chemistry and decomposition. The thesis is based on two experiments, in which young aspen (< 1 year) were exposed either to an atmospheric pollutant [elevated ozone (O3)] or variable resource availability [water, nitrogen (N)]; and two field studies, in which mature trees (> 8 years) were growing in environments exposed to multiple environmental stress factors (roadside and urban environments). The field studies included litter decomposition experiments. The results show that young aspen, especially the native European aspen, was sensitive to O3 in terms of visible leaf injuries. Elevated O3 resulted in reduced biomass allocation to roots and accelerated leaf senescence, suggesting negative effects on growth in the long term. Water and N availability modified the frost hardening of young aspen: High N supply, especially when combined with drought, postponed the development of frost hardiness, which in turn may predispose trees to early autumn frosts. This effect was more pronounced in European aspen. The field studies showed that mature aspen acclimatized to roadside and urban environments by producing more xeromorphic leaves. Leaf morphology was also observed to vary in response to interannual climatic variation, which further indicates the ability of aspen for phenotypic plasticity. Intraspecific variation was found in several of the traits measured, although intraspecific differences in response to the abiotic factors examined were generally small throughout the studies. However, some differences between clones were found in sensitivity to O3 and the roadside environment. Aspen leaf litter decomposition was retarded in the roadside environment, but only initially. By contrast, decomposition was found to be faster in the urban than the rural environment throughout the study. The higher quality of urban litter (higher in N, lower in lignin and phenolics), as well as higher temperature, N deposition and humus pH at the urban site were factors likely to promote decay. The phenotypic plasticity combined with intraspecific variation found in the studies imply that aspen has potential for withstanding environmental changes, although some global change factors, such as rising O3 levels, may adversely affect its performance. The results also suggest that the multiple environmental changes taking place in urban areas which correspond closely with the main drivers of global change can modify ecosystem functioning by promoting litter decomposition, mediated partly by alterations in leaf litter quality.

Heating values of mature trees.

The effective heating values of the above and below ground biomass components of mature Scots pine (Pinus sylvestris), Norway spruce (Picea abies), downy birch (Betula pubescens), silver birch (Betula pendula), grey alder (Alnus incana), black alder (Alnus glutinosa) and trembling aspen (Populus tremula) were studied. Each sample tree was divided into wood, bark and foliage components. Bomb calorimetry was used to determine the calorimetric heating values. The species is a significant factor in the heating value of individual tree components. The heating value of the wood proper is highest in conifers. Broad-leaved species have a higher heating value of bark than conifers. The species factor diminishes when the weighted heating value of crown, whole stems or stump-root-system are considered. The crown material has a higher heating value per unit weight in comparison with fuelwood from small-sized stems or wholetrees. The additional advantages of coniferous crown material are that it is a non-industrial biomass resource and is readily available. The variability of both the chemical composition and the heating value is small in any given tree component of any species. However, lignin, carbohydrate and extractive content were found to vary from one part of the tree to another and to correlate with the heating value.

Lipeäkäsitellyn vehnän vaikutus lypsylehmien syöntiin ja tuotokseen vapaalla seosrehuruokinnalla

Lipeä on vahva emäs, jonka on havaittu lisäävän hemiselluloosan ja ligniinin hydrolyysiä pötsissä. Näin ollen lipeäkäsittelyllä on mahdollista korvata viljan mekaaninen litistys ja jauhatus. Seosrehuruokinnalla, jonka osana on lipeäkäsitelty vilja, on mahdollista vähentää liiallisesta tärkkelyksestä aiheutuvia metabolisia ongelmia pötsissä. Tämän tutkielman tarkoituksena oli selvittää lipeäkäsitellyn vehnän vaikutusta lypsylehmien syöntiin ja tuotokseen ad libitum seosrehuruokinnoilla. Ruokinnoissa korvattiin kuivaa murskattua vehnää asteittain kokonaisella lipeäkäsitellyllä vehnällä. Kontrollina oli perinteisesti käytetty kuiva, murskattu ohra-kaura seos. Koe tehtiin Ruotsin maatalousyliopiston (SLU) maataloustieteiden laitoksella Uumajassa. Koe alkoi syyskuussa ja päättyi joulukuussa 2010. Kokeessa oli 17 useamman kerran poikinutta lehmää ja 6 ensikkoa (Ruotsin punainen -rotu). Lehmät olivat lämpimässä pihattonavetassa, jossa seosrehun syöntiä mitattiin vaakakuppien avulla. Koekäsittelyt olivat murskattu ohra-kaura seos (1:1), murskattu kuiva vehnä (1:0), murskatun kuivan vehnän ja kokonaisen lipeävehnän seos (1:1) ja kokonainen lipeävehnä (1:0). Ruokintojen kuiva-ainepitoisuudeksi asetettiin 370 g/kg ja raakavalkuaispitoisuudeksi 180 g/kg kuiva-ainetta. Näennäinen ravintoaineen sulavuus määritettiin happoon liukenemattoman tuhkan avulla. Typen hyväksikäyttöä arvioitiin laskennallisen typpitaseen avulla. Koe toteutettiin 4x4 latinalaisen neliön koemallin mukaisesti ja käsittelyjen väliset tilastolliset erot testattiin kontrastien avulla. Kuiva-aineen (PQ=0,02) ja orgaanisen aineen (PQ=0,02) syönnit lisääntyivät, samalla kun niiden sulavuudet paranivat korvattaessa puolet kuivasta vehnästä lipeävehnällä. Ruokintojen välillä ei ollut tilastollisesti merkitsevää eroa maitotuotoksessa eikä energiakorjatussa maitotuotoksessa. Maidon rasvatuotos lisääntyi vähän (PQ=0,04) ja rasvapitoisuus selvästi (PQ=0,004), kun kuivasta vehnästä korvattiin puolet lipeävehnällä. Kun kaikki kuiva vehnä korvattiin lipeävehnällä, maidon valkuaispitoisuus väheni (PL<0,001). Samoin kävi maidon ureapitoisuudelle (PL=0,002). Lipeäkäsittely ei tuottanut tässä kokeessa taloudellisesti kannattavaa tulosta, sillä maidon valkuaispitoisuus väheni ja syönti lisääntyi maitotuotoksen pysyessä samana. Vehnäruokinnoista paras tuotosvaste saatiin kuivan vehnän ja lipeävehnän seoksella.

Anaerobic retting of banana and arecanut wastes in a plug flow digester for recovery of fiber, biogas and compost

Leaves and leaf sheath of banana and areca husk (Areca catechu) constitute an important component of urban solid waste (USW) in India which are difficult to degrade under normal windrow composting conditions. A successful method of anaerobic digestion built around the fermentation properties of these feedstock has been evolved which uses no moving parts, pretreatment or energy input while enabling recovery of four products: fiber, biogas, compost and pest repellent. An SRT of 27 d and 35 d was found to be optimum for fiber recovery for banana leaf and areca husk, respectively. Banana leaf showed a degradation pattern different from other leaves with slow pectin-1 degradation (80%) and 40% lignin removal in 27 d SRT. Areca husk however, showed a degradation pattern similar to other plant biomass. Mass recovery levels for banana leaf were fiber-20%, biogas-70% (400 ml/g TS) and compost-10%. For areca husk recovery was fiber-50%, biogas-45% (250 ml/g TS) and compost-5%. (C) 2012 Elsevier Inc. All rights reserved.

The environmental and economic sustainability of potential bioethanol from willow in the UK.

Life cycle assessment has been used to investigate the environmental and economic sustainability of a potential operation in the UK in which bioethanol is produced from the hydrolysis and subsequent fermentation of coppice willow. If the willow were grown on idle arable land in the UK, or, indeed, in Eastern Europe and imported as wood chips into the UK, it was found that savings of greenhouse gas emissions of 70-90%, when compared to fossil-derived gasoline on an energy basis, would be possible. The process would be energetically self-sufficient, as the co-products, e.g. lignin and unfermented sugars, could be used to produce the process heat and electricity, with surplus electricity being exported to the National Grid. Despite the environmental benefits, the economic viability is doubtful at present. However, the cost of production could be reduced significantly if the willow were altered by breeding to improve its suitability for hydrolysis and fermentation.

Chelation-enforced metal-arene interactions : insights into substrate binding and catalysis by late transition metal complexes

Understanding and catalyzing chemical reactions requiring multiple electron transfers is an endeavor relevant to many outstanding challenges in the field of chemistry. To study multi-electron reactions, a terphenyl diphosphine framework was designed to support one or more metals in multiple redox states via stabilizing interactions with the central arene of the terphenyl backbone. A variety of unusual compounds and reactions and their relevance toward prominent research efforts in chemistry are the subject of this dissertation.

Chapter 2 introduces the para-terphenyl diphosphine framework and its coordination chemistry with group 10 transition metal centers. Both mononuclear and dinuclear compounds are characterized. In many cases, the metal center(s) are stabilized by the terphenyl central arene. These metal–arene interactions are characterized both statically, in the solid state, and fluxionally, in solution. As a proof-of-principle, a dinickel framework is shown to span multiple redox states, showing that multielectron chemistry can be supported by the coordinatively flexible terphenyl diphosphine.

Chapter 3 presents reactivity of the terphenyl diphosphine when bound to a metal center. Because of the dearomatizing effect of the metal center, the central arene of the ligand is susceptible to reactions that do not normally affect arenes. In particular, Ni-to-arene H-transfer and arene dihydrogenation reactions are presented. Additionally, evidence for reversibility of the Ni-to-arene H-transfer is discussed.

Chapter 4 expands beyond the chelated metal-arene interactions of the previous chapters. A dipalladium(I) terphenyl diphosphine framework is used to bind a variety of exogenous organic ligands including arenes, dienes, heteroarenes, thioethers, and anionic ligands. The compounds are structurally characterized, and many ligands exhibit unprecedented bindng modes across two metal centers. The relative binding affinities are evaluated spectroscopically, and equilibrium binding constants for the examined ligands are determined to span over 13 orders of magnitude. As an application of this framework, mild hydrogenation conditions of bound thiophene are presented.

Chapter 5 studies nickel-mediated C–O bond cleavage of aryl alkyl ethers, a transformation with emerging applications in fields such as lignin biofuels and organic methodology. Other group members have shown the mechanism of C–O bond cleavage of an aryl methyl ether incorporated into a meta-terphenyl diphosphine framework to proceed through β-H elimination of an alkoxide. First, the electronic selectivity of the model system is examined computationally and compared with catalytic systems. The lessons learned from the model system are then applied to isotopic labeling studies for catalytic aryl alkyl ether cleavage under dihydrogen. Results from selective deuteration experiments and mass spectrometry draw a clear analogy between the mechanisms of the model and catalytic systems that does not require dihydrogen for C–O bond cleavage, although dihydrogen is proposed to play a role in catalyst activation and catalytic turnover.

Appendix A presents initial efforts toward heterodinuclear complexes as models for CO dehydrogenase and Fischer Tropsch chemistry. A catechol-incorporating terphenyl diphosphine is reported, and metal complexes thereof are discussed.

Appendix B highlights some structurally characterized terphenyl diphosphine complexes that either do not thematically belong in the research chapters or proved to be difficult to reproduce. These compounds show unusual coordination modes of the terphenyl diphosphine from which other researchers may glean insights.

Caracterização e utilização do resíduo de palha de milho para obtenção de nanocelulose

Esta Dissertação discorre sobre a pesquisa de caracterização de palha de milho e a sua utilização como matéria prima para a obtenção de nanocelulose. Segundo o IBGE, este resíduo agrícola foi produzido no Brasil, no ano de 2013, em cerca de seis milhões de toneladas. As amostras deste resíduo lignocelulósico utilizadas neste trabalho foram coletadas na forma cotidiana de descarte mais frequentemente encontrada em supermercados e feiras livres. Procedeu-se, então, ao beneficiamento mecânico, beneficiamento químico (mercerização e branqueamento) e hidrólise ácida dessas amostras, o que produziu os seguintes materiais: palha de milho beneficiada mecanicamente, palha de milho beneficiada quimicamente e nanocelulose. Cada um destes materiais foi caracterizado, conforme o tipo, por menos ou mais dos seguintes ensaios: determinação de densidade, determinação de umidade, determinação do teor de cinzas, resistência à tração, determinação do teor de extraíveis, determinação do teor de holocelulose, determinação do teor de hemicelulose, determinação do teor de alfacelulose, determinação do teor de lignina, análise termogravimétrica (TGA), espectroscopia por infravermelho por transformada de Fourier (FTIR), índice de cristalinidade por difração de raios-x (CrI), medição do tamanho de partícula por espalhamento de luz dinâmico (DLS), morfologia por microscopia eletrônica de varredura (SEM) e determinação do rendimento dos produtos de hidrólise. Nesta pesquisa também se estudou, empregando a técnica de planejamento de experimento fatorial com ponto central, a influência dos fatores razão fibra/ácido e tempo da reação na obtenção da nanocelulose, conseguida com êxito em todos os experimentos executados com a palha de milho que foi branqueada de forma efetiva neste trabalho

小麦肉桂酰辅酶A还原酶（CCR）基因的分离和功能分析

作为植物界广泛存在的一类酚类聚合物，木质素是陆生植物正常生长发育过程中非常重要的生物大分子，而且与人类的生活息息相关。利用分子生物学手段和基因工程方法，从小麦中分离木质素生物合成途径的关键酶-肉桂酰辅酶A还原酶基因（CCR），研究肉桂酰辅酶A还原酶基因在木质素代谢途径中的调控规律，从其催化的限速步骤入手，来调控木质素的合成，有效的改变木质素的组成、含量和结构，是改善木质素在植物生长发育中的作用乃至开发木质素资源的关键所在。本文就小麦肉桂酰辅酶A还原酶基因的分离、表达特征及其在木质素合成途径中的作用开展了研究工作。 首先用RACE方法从小麦中克隆了CCR的两个cDNA的部分序列，序列分析表明它们编码的蛋白具有CCR的典型特点，GC含量高于均60%，两者在核酸水平和蛋白水平的同源性为76%和 69%，证明在小麦中至少存在着两个CCR基因。通过 RT-PCR和Northern 杂交确定W-cr6和W-cr19在小麦的发育中具有不同的表达特征，W-cr6主要在茎中表达，而W-cr19的表达集中在根中。以W-cr6为探针，从cDNA文库中筛选到一个全长1317bp的cDNA，命名为TaCCR1。TaCCR1包括开放阅读框 (ORF) 1047bp、5′端侧翼 72bp和3′端侧翼198bp的非翻译序列。TaCCR1能够编码由349个氨基酸组成的蛋白质，预期的分子量为37.4kD。同源性比较显示TaCCR1基因在核酸水平和蛋白质水平与其他物种的CCR基因的同源性高于60%。 为了分析CCR在木质素合成中的作用，用TaCCR1构建了用于转化烟草的正义和反义表达载体pStCCR和pAtCCR、用于转化小麦的正义和反义表达载体pBSC1和pBAC1。通过农杆菌介导得到了30株反义转基因烟草和12株正义转基因烟草。由于外源基因的抑制作用，转基因烟草在形态、木质素组成和含量、木质部显微结构上都程度不同的发生了变化。正义和反义的转基因株系呈现出株型矮化、木质素含量下降、木质部导管细胞壁受到破坏等现象。同时利用花粉管通道法转化小麦种子5000多粒，部分处理经过初步的PCR和 Southern分子鉴定获得了1株转基因株系，需要对其遗传、生理和形态特征做进一步的研究。 本文还对木质素对小麦茎杆的机械强度的影响做了初步的探讨，得到的结果是小麦茎杆的木质素含量、维管束的数量、茎杆有效的横界面积与其最大弯曲应力存在着正相关，而维管束的结构、密度对茎杆的最大弯曲应力没有明显的影响，从而为通过CCR基因来改善小麦茎杆的抗倒特性建立了生理学基础。

毛竹茎木质化过程的组织细胞学研究

应用光学显微镜和透射电子显微镜，并结合组织化学和细胞化学方法，研究了毛竹（Phyllostachys pubescens Mazel）茎各组织中细胞壁的木质化过程、木质素异质性、酚酸类成分的分布、木质素在细胞壁中的沉积方式以及过氧化物酶的组织、细胞化学定位等。 研究结果表明：毛竹茎的原生木质部导管在维管束发育早期就已木质化;后生木质部导管和纤维细胞在维管束分化完成后，自胞间层和细胞角隅处开始木质化;基本薄壁组织细胞木质化的发生较晚，通常在茎的节间完成伸长生长后才开始，但也有少数薄壁组织细胞始终保持非木质化的薄壁状态。根据可见光显微分光光度的分析结果，纤维细胞壁在木质化的早期，主要形成愈创木基木质素（guaiacyl lignin）, 随着木质化过程的发展，紫丁得基木质素（syringyl lignin）含量不断增加，最后成为纤维细胞壁木质素的主要组成成分。导管分子的木质素主要成分为愈创木基木质素，基本薄壁组织细胞壁为愈创木基与紫丁香基两种。 毛竹茎各组织在紫外光激发下自发荧光的荧光显微分光光度分析表明，氨水处理可以有效地识别阿魏酸的分布，如在竹笋各种幼嫩组织中均分布有阿魏酸;而用过氧化氢／冰醋酸混合液处理，则可以区分木素与结合于半纤维素中的阿魏酸和对－香豆酸，随着毛竹茎的生长和细胞壁木质化的增加，阿魏酸的含量下降。 通过对毛竹茎纤维细胞壁木质化过程中超微结构的观察表明，高尔基体、高尔基小泡、内质网、壁旁体细胞器在木质素前体的形成和运输等方面均起着重要作用，而周质微管在细胞壁木质化过程中的具体作用方式尚不明确。木质素在细胞壁中的沉积方式分别为：胞间层的木质素呈分散的颗粒状沉积方式，导管次生壁的木质素为片层状沉积方式，而在纤维细胞次生壁Sl层中，木质素为团块状的沉积方式。木质素沉积方式与纤维素微纤丝的排列有密切关系。 在毛竹茎各组织的细胞壁尚未木质化之前，过氧化物酶仅分布于细胞角隅处，随着细胞次生壁的增厚和木质化的增强，过氧化物酶可大量出现在次生壁中;在纤维细胞次生壁中，木质素含量较高的St各层，过氧化物酶活性也较强，而木质素含量较低的Sl各层，过氧化物酶活性则较弱。由此表明，过氧化物酶直接参与了细胞壁木质素的合成。另外，在茎的部分基本薄壁组织细胞和韧皮部等未木质化的细胞壁中，过氧化物酶也同样表现出较强的活性，这说明在茎的不同组织中分布的这种酶，可能是几种不同功能的同工酶形式。