Reliability and validity of physiological data obtained within a cycle-run transition test in age-group triathletes.

This study examined the validity and reliability of a sequential "Run-Bike-Run" test (RBR) in age-group triathletes. Eight Olympic distance (OD) specialists (age 30.0 ± 2.0 years, mass 75.6 ± 1.6 kg, run VO2max 63.8 ± 1.9 ml· kg(-1)· min(-1), cycle VO2peak 56.7 ± 5.1 ml· kg(-1)· min(-1)) performed four trials over 10 days. Trial 1 (TRVO2max) was an incremental treadmill running test. Trials 2 and 3 (RBR1 and RBR2) involved: 1) a 7-min run at 15 km· h(-1) (R1) plus a 1-min transition to 2) cycling to fatigue (2 W· kg(-1) body mass then 30 W each 3 min); 3) 10-min cycling at 3 W· kg(-1) (Bsubmax); another 1-min transition and 4) a second 7-min run at 15 km· h(-1) (R2). Trial 4 (TT) was a 30-min cycle - 20-min run time trial. No significant differences in absolute oxygen uptake (VO2), heart rate (HR), or blood lactate concentration ([BLA]) were evidenced between RBR1 and RBR2. For all measured physiological variables, the limits of agreement were similar, and the mean differences were physiologically unimportant, between trials. Low levels of test-retest error (i.e. ICC <0.8, CV<10%) were observed for most (logged) measurements. However [BLA] post R1 (ICC 0.87, CV 25.1%), [BLA] post Bsubmax (ICC 0.99, CV 16.31) and [BLA] post R2 (ICC 0.51, CV 22.9%) were least reliable. These error ranges may help coaches detect real changes in training status over time. Moreover, RBR test variables can be used to predict discipline specific and overall TT performance. Cycle VO2peak, cycle peak power output, and the change between R1 and R2 (deltaR1R2) in [BLA] were most highly related to overall TT distance (r = 0.89, p < 0. 01; r = 0.94, p < 0.02; r = 0.86, p < 0.05, respectively). The percentage of TR VO2max at 15 km· h(-1), and deltaR1R2 HR, were also related to run TT distance (r = -0.83 and 0.86, both p < 0.05).

Chroma binary similarity and local alignment applied to cover song identification

We present a new technique for audio signal comparison based on tonal subsequence alignment and its application to detect cover versions (i.e., different performances of the same underlying musical piece). Cover song identification is a task whose popularity has increased in the Music Information Retrieval (MIR) community along in the past, as it provides a direct and objective way to evaluate music similarity algorithms.This article first presents a series of experiments carried outwith two state-of-the-art methods for cover song identification.We have studied several components of these (such as chroma resolution and similarity, transposition, beat tracking or Dynamic Time Warping constraints), in order to discover which characteristics would be desirable for a competitive cover song identifier. After analyzing many cross-validated results, the importance of these characteristics is discussed, and the best-performing ones are finally applied to the newly proposed method. Multipleevaluations of this one confirm a large increase in identificationaccuracy when comparing it with alternative state-of-the-artapproaches.

LdShake: learning design solutions sharing and co-edition

Two important challenges that teachers are currently facing are the sharing and the collaborative authoring of their learning design solutions, such as didactical units and learning materials. On the one hand, there are tools that can be used for the creation of design solutions and only some of them facilitate the co-edition. However, they do not incorporate mechanisms that support the sharing of the designs between teachers. On the other hand, there are tools that serve as repositories of educational resources but they do not enable the authoring of the designs. In this paper we present LdShake, a web tool whose novelty is focused on the combined support for the social sharing and co-edition of learning design solutions within communities of teachers. Teachers can create and share learning designs with other teachers using different access rights so that they can read, comment or co-edit the designs. Therefore, each design solution is associated to a group of teachers able to work on its definition, and another group that can only see the design. The tool is generic in that it allows the creation of designs based on any pedagogical approach. However, it can be particularized in instances providing pre-formatted designs structured according to a specific didactic method (such as Problem-Based Learning, PBL). A particularized LdShake instance has been used in the context of Human Biology studies where teams of teachers are required to work together in the design of PBL solutions. A controlled user study, that compares the use of a generic LdShake and a Moodle system, configured to enable the creation and sharing of designs, has been also carried out. The combined results of the real and controlled studies show that the social structure, and the commenting, co-edition and publishing features of LdShake provide a useful, effective and usable approach for facilitating teachers' teamwork.

Bayesian networks for evaluating forensic DNA profiling evidence: a review and guide to literature

Almost 30 years ago, Bayesian networks (BNs) were developed in the field of artificial intelligence as a framework that should assist researchers and practitioners in applying the theory of probability to inference problems of more substantive size and, thus, to more realistic and practical problems. Since the late 1980s, Bayesian networks have also attracted researchers in forensic science and this tendency has considerably intensified throughout the last decade. This review article provides an overview of the scientific literature that describes research on Bayesian networks as a tool that can be used to study, develop and implement probabilistic procedures for evaluating the probative value of particular items of scientific evidence in forensic science. Primary attention is drawn here to evaluative issues that pertain to forensic DNA profiling evidence because this is one of the main categories of evidence whose assessment has been studied through Bayesian networks. The scope of topics is large and includes almost any aspect that relates to forensic DNA profiling. Typical examples are inference of source (or, 'criminal identification'), relatedness testing, database searching and special trace evidence evaluation (such as mixed DNA stains or stains with low quantities of DNA). The perspective of the review presented here is not exclusively restricted to DNA evidence, but also includes relevant references and discussion on both, the concept of Bayesian networks as well as its general usage in legal sciences as one among several different graphical approaches to evidence evaluation.

Integrated Materials and Construction Practice for Concrete Pavement: A State-of-the-Practice Manual, 2006

At the heart of all concrete pavement projects is the concrete itself. This manual is intended as both a training tool and a reference to help concrete paving engineers, quality control personnel, specifiers, contractors, suppliers, technicians, and tradespeople bridge the gap between recent research and practice regarding optimizing the performance of concrete for pavements. Specifically, it will help readers do the following:

Handbook of Simplified Practice for Traffic Studies, November 2002

The Iowa Highway Research Board has identified the development of a simplified handbook of transportation studies as a high priority for the state of Iowa. The Center for Transportation Research and Education (CTRE) at Iowa State University was chosen to develop such a handbook. A well-executed, well-documented study is critical in the decision-making process for many transportation-related projects and in reporting to elected officials and members of the community. As more research is conducted in the area of transportation, study procedures in many cases have become more complex. It is often difficult for local jurisdictions with limited staff, training, experience, and time availability to perform these studies. The most commonly used publication for traffic studies is geared toward transportation professionals and professional engineers. That defining document, Manual of Transportation Studies (Institute of Transportation Engineers, 2000), is over 500 pages and includes several dozen types of transportation studies. Many of the transportation studies described in the manual are rarely (if ever) used by local jurisdictions. Further, those studies that are frequently used are at times very complex and possibly very costly to perform exactly as described. Local jurisdictions without the staff expertise to understand and apply the manual’s various studies have a need for a simplified handbook of procedures to perform common traffic studies themselves or properly define a scope of work to hire a consultant to perform the studies. This handbook describes simplified procedures that are easy to apply and are written for all potential users (civil engineers and traffic engineers, public works mangers, city managers and attorneys, and the general public).

2011 Energy Independence Plan

Iowa has experienced remarkable progress in the past four years as the state has pursued a vision of becoming the nation’s energy leader. One of the most profound changes over this time has been a richer understanding of the economic future that can be created in Iowa by adding “Made in Iowa” alternatives to our nation’s energy mix. Built around a strong commitment to transforming our economy through innovation, collaboration, and implementation in the energy industry, the role of the Office of Energy Independence (Office) is to bring together the essential prerequisites for maintaining the long-term health and economic growth of our state. What is clearer than ever before is Iowa cannot achieve success if any entity chooses to pursue these goals independently. Rather, success requires that we consistently work to achieve our goals through integrated initiatives that place a high priority on moving us forward simultaneously, and on multiple fronts. Success is what our citizens expect from a leading state in the energy industry whose actions carry such far-reaching implications for the economy and the environment.

Implantació d'un sistema SCADA en una cèl·lula flexible de fabricació

La Universitat de Vic disposa, entre altres equips, d’una cèl·lula flexible de fabricació, del fabricant Festo, que simula un procés de formació de palets amb els productes que es disposen en un magatzem intermedi. Aquesta cèl·lula està composta de quatre estacions de muntatge diferenciades (càrrega de palets, càrrega de plaques, magatzem intermedi i transport). Cada una disposa d'un PLC SIEMENS S7-300 per la seva automatització, i tots aquests es troben interconnectats amb una xarxa industrial Profibus. L'objectiu d'aquest projecte és implantar el sistema SCADA Vijeo Citect pel control i supervisió de l'estació magatzem d'aquesta cèl·lula flexible de fabricació, establint també un intercanvi de dades entre l'SCADA i el Microsoft Access, per poder ser utilitzat per la docència. Aquest projecte s'ha desenvolupat en cinc fases diferents: 1. La primera fase s'ha dedicat a l'automatització pròpiament de l'estació magatzem a partir de l'autòmat programable Siemens S7-300 i complint amb les necessitats plantejades. 2. En la segona fase s'ha programat i establert la comunicació per l'intercanvi de dades (lectura i escriptura) entre el sistema SCADA Vijeo Citect i la base de dades de Microsoft Access. 3. En la tercera fase s'ha elaborat i programat l'entorn gràfic de supervisió i control del procés a partir del sistema SCADA Vijeo Citect. 4. En la quarta fase s'ha instal·lat un OPC Server en el PC i s'ha establert la comunicació entre el PLC i el sistema SCADA. 5. Finalment s'ha anat revisant i depurant les diferents programacions i comunicacions per tal de que el sistema funcioni com a un conjunt.

Potential Role of TRAIL in the Management of Autoimmune Diabetes Mellitus.

Type 1 diabetes mellitus (T1DM) is an autoimmune disease, due to the immune-mediated destruction of pancreatic β-cells, whose incidence has been steadily increasing during the last decades. Insulin replacement therapy can treat T1DM, which, however, is still associated with substantial morbidity and mortality. For this reason, great effort is being put into developing strategies that could eventually prevent and/or cure this disease. These strategies are mainly focused on blocking the immune system from attacking β-cells together with functional islet restoration either by regeneration or transplantation. Recent experimental evidences suggest that TNFrelated apoptosis-inducing ligand (TRAIL), which is an immune system modulator protein, could represent an interesting candidate for the cure for T1DM and/or its complications. Here we review the evidences on the potential role of TRAIL in the management of T1DM.

Situating forensic traces in time

Situating events and traces in time is an essential problem in investigations. To date, among the typical ques- 21¦tions issued in forensic science, time has generally been unexplored. The reason for this can be traced to the 22¦complexity of the overall problem, addressed by several scientists in very limited projects usually stimulated 23¦by a specific case. Considering that such issues are recurrent and transcending the treatment of each trace 24¦separately, the formalisation of a framework to address dating issues in criminal investigation is undeniably 25¦needed. Through an iterative process consisting of extracting recurrent aspects discovered from the study of 26¦problems encountered by practitioners and reported in the literature, common mechanisms were extracted 27¦and provide understanding of underlying factors encountered in forensic practise. Three complementary ap- 28¦proaches are thus highlighted and described to formalise a preliminary framework that can be applied for the 29¦dating of traces, objects, persons and indirectly events.

Time in e-Learning Research: A Qualitative Review of the Empirical Consideration of Time in Research into e-Learning

Peer-reviewed

Konfiguroituvan tuotteen tuoterakennesystematiikan kehittäminen

Ponsse Oyj:n kaltainen konfiguroituvaa, monimutkaista tuotetta valmistava yhtiö tarvitsee ehdottomasti nykyaikaisen modulaarisuuteen perustuvan tuoterakennesystematiikan. Käyttämällä osioita eri modulaarisuusmalleista ja soveltamalla niitä Ponssen näkökulmasta kaikkein edullisimmalla tavalla, on kehitetty ensimmäinen case - tapaus ja sen myötä mahdollisimman yksinkertainen toimintamalli. Mallissa on otettu huomioon myös useat tuoterakenteen kanssa vuorovaikutuksessa olevat tekijät. Myyntitilanteen valinnat ovat listattu konfigurointimatriisiin ja ne voivat olla itsenäisiä tai sulkea pois joitakin toisia valintoja. Kun sopiva koneyksilö on muodostettu, saadaan matriisista samantien tulostettua valintojen mukainen tuoteyksilö. Tuoteyksilön moduulirakenne toimii kyseisen, yksittäisen koneen työmääräimenä sekä koneenvalmistuksen dokumenttina, sillä luettelon yksi moduuli on yhden valmistettavantyövaiheen moduulipiirustus alimoduuleineen ja osineen. Moduulipiirustusten on siis otettava huomioon tuotannon, oston, suunnittelun ja dokumentoinnin näkökulmat. Piirustuksen laatijan on tiedettävä kyseisen moduulin valmistus eli koottavan komponenttikokoelman laajuus sekä tuotantolinjan että osto-osaston intressien mukaisesti. Piirustuksen on nivouduttava sitä kutsuvaan matriisiin ja kyseisen moduulin valinnan kytköksiin muihin moduuleihin nähden. Kaiken lisäksi piirustuksen on toimittava kokoonpano-ohjeena sekä jälkimarkkinoinnin työkaluna. Tässä työssä muodostettiin metsätraktorin ohjaamosta esimerkkitapaus. Case tapauksessa käytettiin työssä esitettyä uutta tuoterakennesystematiikkaa uuden modulaarisuussäännöstön käytöstä, laskettu sen aiheuttamat muutokset ja sen tuotantoon otosta on kerätty ensimmäiset kommentit. Esimerkillä pyrittiin saavuttamaan modulaarisen tuoterakenteen mahdollistamat edut ja projektia on jatkettu Ponsse Oyj:llä käsittämään muitakin tuotekokonaisuuksia.

Contribution of isotope ratio mass spectrometry to the investigation of improvised explosives: isotopic study of black powders ans ammonium nitrates

The establishment of legislative rules about explosives in the eighties has reduced the illicit use of military and civilian explosives. However, bomb-makers have rapidly taken advantage of substances easily accessible and intended for licit uses to produce their own explosives. This change in strategy has given rise to an increase of improvised explosive charges, which is moreover assisted by the ease of implementation of the recipes, widely available through open sources. While the nature of the explosive charges has evolved, instrumental methods currently used in routine, although more sensitive than before, have a limited power of discrimination and allow mostly the determination of the chemical nature of the substance. Isotope ratio mass spectrometry (IRMS) has been applied to a wide range of forensic materials. Conclusions drawn from the majority of the studies stress its high power of discrimination. Preliminary studies conducted so far on the isotopic analysis of intact explosives (pre-blast) have shown that samples with the same chemical composition and coming from different sources could be differentiated. The measurement of stable isotope ratios appears therefore as a new and remarkable analytical tool for the discrimination or the identification of a substance with a definite source. However, much research is still needed to assess the validity of the results in order to use them either in an operational prospect or in court. Through the isotopic study of black powders and ammonium nitrates, this research aims at evaluating the contribution of isotope ratio mass spectrometry to the investigation of explosives, both from a pre-blast and from a post-blast approach. More specifically, the goal of the research is to provide additional elements necessary to a valid interpretation of the results, when used in explosives investigation. This work includes a fundamental study on the variability of the isotopic profile of black powder and ammonium nitrate in both space and time. On one hand, the inter-variability between manufacturers and, particularly, the intra-variability within a manufacturer has been studied. On the other hand, the stability of the isotopic profile over time has been evaluated through the aging of these substances exposed to different environmental conditions. The second part of this project considers the applicability of this high-precision technology to traces and residues of explosives, taking account of the characteristics specific to the field, including their sampling, a probable isotopic fractionation during the explosion, and the interferences with the matrix of the site.

Strateginen toimintoperusteisen kustannuslaskentaprojektin ohjaus

Työn päätavoitteena oli tutkia, miten toimintoperusteisia kustannuslaskentaprojekteja (ABC) voidaan ohjata tehokkaammin tulevaisuudessa, ja löytää toimintojohtamisen (ABM) tuki liiketoiminnan strategiselle johtamiselle verkottuvassa yritysmaailmassa. Lisäksi tavoitteena oli määritellä ABC-projektien johtamismallien viitekehys ja vertailla toteutettuja ABC-hankkeita.Toimintolaskentaa ja prosessijohtamista selvitettiin kirjallisuuden ja asiantuntijoiden haastatteluiden avulla. Tutkimuksen empiirisen osan ABC-hankkeiden tiedot pohjautuvat projekteissa tiiviisti mukana olleiden henkilöiden haastatteluihin. Kolmen eri yhtiön hankkeet kuvattiin, ja niiden analysoinnin pohjalta esitettiin mahdollisia jatkotoimenpiteitä liiketoiminnan johtamisen näkökulmasta. Lopuksi työssä pohdittiin myös liiketoiminnan ohjaamisen tulevaisuutta ja jatkotutkimustarpeita.Eri ABC-projektien vertailun pohjalta havaittiin mahdollisia hankekohtaisia kehitysalueita, kuten tietojärjestelmien yhtenäisyys, joustavuus, strateginen oppiminen tulevaisuudessa ja resurssien kohdentaminen. Lisäksi toteutettuja hankkeita arvioitiin liiketoiminnan ohjausta tukevan vuorovaikutteisen resurssisuunnittelun pohjalta. Työssä luotiin ABC-projektien johtamismallien kautta viitekehyksiä mahdollisille jatkohankkeille korostamalla prosessimaisuutta ja ulkoista verkottumista.Lopuksi esitetään, että ennen ABC-hankkeen aloitusta on yrityksen nykyinen tila ja tietojärjestelmät analysoitava. Projektia ei saa toteuttaa vain yhden hyväksi koetun tavan mukaisesti, vaan onnistunut ABC-projektin läpivienti vaatii monien erilaisten toteutus- ja ajattelumallien yhdistämistä. ABC-sovellusten on tuettava sekä operatiivista toimintaa että strategista liiketoiminnan johtamista. Tehokas verkottuminen mahdollistaa lopulta ulkoisten prosessien hallinnan yhdessä organisaation sidosryhmien kanssa.

The Changing Face of Psychiatric Nursing –Care or Control?

This report has been written as part of the project “Toward improved quality – developing nurse’s continuing vocational training in hospitals and inpatient units”. Its overall goal is to ensure high quality, ethically appropriate and therapeutically effective interventions to enable nurses to manage distressed and disturbed patients in European psychiatric hospitals and inpatient units. In this large-scale, multinational projects there are all together six European countries involved: Finland, Ireland, England, Portugal, Italy and Lithuania. The project work plan were during autumn 2006 and spring 2007. The content of this publication was produced in the first stage of the project aiming to collect the preliminary source material for the project. The literature review was carried out in the project stage, providing the groundwork for the next steps for the project. This project aims to develop an interactive multinational portal with training material. Therefore, it is important to share an understanding of basic information, psychiatric nurse’s continuing vocational education, laws and ethical codes and patient restriction used in mental health care. In this publication, the purpose of the material produced here is to understand nurses’ educational need related to vocational continuing education and to be used in further project stages as an empirical data collection. The data were collected as a preliminary source material for latter phases where nurse’s perceptions of the current practice, nurse’s attitudes to mental illness, prevalence of use of seclusion room and existing and desired vocational training provision will be collected in six different European countries. The following organisations are involved in this project: University of Turku, Dublin City University, St. Vincent Hospital, National Council for the Professional Development of Nursing and Midwifery, University of Padova, Klaipeda College - Health Faculty, Klaipeda Psychiatric Hospital, Escola Superior de Enfermagem de Lisboa, Centro Hospitalar Psiquiátrico de Lisboa, Omnia Vocational Institution the Espoo Region, Kellokoski psychiatric hospital, Hyvinkää hospital area, Pirkanmaa Hospital District, Kingston University & St. George’s Medical School and South West London & St. George’s Mental Health NHS Trust. A wide variety of different countries, organisations and individuals in this project give us a strong confidence that theoretical, practical, ethical and political issues around the topic of interest will be taken account during this project lifetime. We are aware the content of this book will be partially outdated almost as soon as it has been published. We still hope that this publication will encourage nurses and different professions working in mental health care field to have a basic understanding of similarities and differences between different European countries related in mental health care. We also hope that this publication will inspirate and motivate nurses in maintaining and developing the quality of psychiatric care in Europe.