Lagrangian transport of particles in Ria de Aveiro lagoon, Portugal

A two-dimensional vertically integrated hydrodynamic model coupled to a particle tracking model is applied to study the dispersion processes and residence time in Ria de Aveiro lagoon (Portugal). The only dispersion process that is considered in this study is the advection, according to the main characteristics of the local hydrodynamic. The particle tracking model computes the particles position at each time step, using a fourth-order Runge-Kutta integration method. The dispersion of passive particles released along the lagoon and in critical areas are studied in this work. The residence time is also determined for the entire lagoon. The results show that the mixture between particles coming from different channels of the lagoon is negligible in a time scale higher than 2 tidal cycles. The residence time for the lagoon central area is about 2 days, revealing a strong marine influence in this area. At the upper reaches of the channels were found values higher than 2 weeks.

Simulating SOC changes in 11 land use change chronosequences from the Brazilian Amazon with RothC and Century models

Land use and land cover changes in the Brazilian Amazon have major implications for regional and global carbon (C) cycling. Cattle pasture represents the largest single use (about 70%) of this once-forested land in most of the region. The main objective of this study was to evaluate the accuracy of the RothC and Century models at estimating soil organic C (SOC) changes under forest-to-pasture conditions in the Brazilian Amazon. We used data from 11 site-specific 'forest to pasture' chronosequences with the Century Ecosystem Model (Century 4.0) and the Rothamsted C Model (RothC 26.3). The models predicted that forest clearance and conversion to well managed pasture would cause an initial decline in soil C stocks (0-20 cm depth), followed in the majority of cases by a slow rise to levels exceeding those under native forest. One exception to this pattern was a chronosequence in Suia-Missu, which is under degraded pasture. In three other chronosequences the recovery of soil C under pasture appeared to be only to about the same level as under the previous forest. Statistical tests were applied to determine levels of agreement between simulated SOC stocks and observed stocks for all the sites within the 11 chronosequences. The models also provided reasonable estimates (coefficient of correlation = 0.8) of the microbial biomass C in the 0-10 cm soil layer for three chronosequences, when compared with available measured data. The Century model adequately predicted the magnitude and the overall trend in delta C-13 for the six chronosequences where measured 813 C data were available. This study gave independent tests of model performance, as no adjustments were made to the models to generate outputs. Our results suggest that modelling techniques can be successfully used for monitoring soil C stocks and changes, allowing both the identification of current patterns in the soil and the projection of future conditions. Results were used and discussed not only to evaluate soil C dynamics but also to indicate soil C sequestration opportunities for the Brazilian Amazon region. Moreover, modelling studies in these 'forest to pasture' systems have important applications, for example, the calculation of CO, emissions from land use change in national greenhouse gas inventories. (0 2007 Elsevier B.V. All rights reserved.

The climate sensitivity and its components diagnosed from Earth Radiation Budget data

One of the major uncertainties in the ability to predict future climate change, and hence its impacts, is the lack of knowledge of the earth's climate sensitivity. Here, data are combined from the 1985-96 Earth Radiation Budget Experiment (ERBE) with surface temperature change information and estimates of radiative forcing to diagnose the climate sensitivity. Importantly, the estimate is completely independent of climate model results. A climate feedback parameter of 2.3 +/- 1.4 W m(-2) K-1 is found. This corresponds to a 1.0-4.1-K range for the equilibrium warming due to a doubling of carbon dioxide (assuming Gaussian errors in observable parameters, which is approximately equivalent to a uniform "prior" in feedback parameter). The uncertainty range is due to a combination of the short time period for the analysis as well as uncertainties in the surface temperature time series and radiative forcing time series, mostly the former. Radiative forcings may not all be fully accounted for; however, all argument is presented that the estimate of climate sensitivity is still likely to be representative of longer-term climate change. The methodology can be used to 1) retrieve shortwave and longwave components of climate feedback and 2) suggest clear-sky and cloud feedback terms. There is preliminary evidence of a neutral or even negative longwave feedback in the observations, suggesting that current climate models may not be representing some processes correctly if they give a net positive longwave feedback.

Discovery of 157W and 161Os

The nuclides 157W and 161Os have been discovered in reactions of 58Ni ion beams with a 106Cd target. The 161Os α -decay energy and half-life were 6890±12 keV and 640±60 μs. The daughter 157W nuclei β -decayed with a half-life of 275±40 ms, populating both low-lying α-decaying states in 157Ta, which is consistent with a 7/2− ground state in 157W. Fine structure observed in the α decay of 161Os places the lowest excited state in 157W with Iπ=9/2− at 318±30 keV. The branching ratio of View the MathML source indicates that 161Os also has a 7/2− ground state. Shell-model calculations analysing the effects of monopole shifts and a tensor force on the relative energies of 2f7/2 and 1h9/2 neutron states in N=83 isotones are presented.

On modeling and evaluating multicomputer transcoding architectures for live-video streams

The pervasive and ubiquitous computing has motivated researches on multimedia adaptation which aims at matching the video quality to the user needs and device restrictions. This technique has a high computational cost which needs to be studied and estimated when designing architectures and applications. This paper presents an analytical model to quantify these video transcoding costs in a hardware independent way. The model was used to analyze the impact of transcoding delays in end-to-end live-video transmissions over LANs, MANs and WANs. Experiments confirm that the proposed model helps to define the best transcoding architecture for different scenarios.

In situ synchrotron SAXS study of polymerizable microemulsions

We present for the first time a real-time small-angle X-ray scattering (SAXS) study of the structural transition of fluid microemulsion to solid polymerized material in a silicone polymerizable microemulsion system. A reactive methacrylate-terminated siloxane macromonomer (MTSM, Mn ∼ 1000 g/mol) was synthesized and used for microemulsion formulations comprising MTSM (oil phase), water, and a mixture of nonionic surfactant (Teric G9A8) with isopropanol. In situ synchrotron SAXS was used to investigate time-dependent nanostructure evolution during the polymerization reaction, which was directly initiated by X-ray radiation. The SAXS data were analyzed using both the Teubner-Strey model and the core-shell model. The results obtained by the Teubner-Strey model showed that the domain size (d) decreased while the correlation length (ξ) increased upon polymerization. The analysis in terms of the core-shell model displayed that adding water to the precursor microemulsion caused the water droplets to start swelling, which resulted in the discontinuity of water in oil microemulsion. There exhibited large differences in morphologies of polymerized materials from the microemulsion formulations with different water and surfactant contents. The core and shell sizes of water droplets decreased during the course of polymerization when there was 15 wt % or more water in the microemulsion formulation; the polymerized material thus exhibited increasingly discrete granular morphology. When there was 10 wt % or less water content in the precursor microemulsion, the rearrangement of water domains could be minimized during the course of polymerization and transparent polymerized material was obtained.

Trapping and imaging of embryonic organisms using dielectrophoresis

Development of dielectrophoretic (DEP) arrays for real-time imaging of embryonic organisms is described. Microelectrode arrays were used for trapping both embryonated eggs and larval stages of Antarctic nematode Panagrolaimus davidi. Ellipsoid single-shell model was also applied to study the interactions between DEP fields and developing multicellular organisms. This work provides proof-of-concept application of chip-based technologies for the analysis of individual embryos trapped under DEP force.

Trapping and imaging of micron-sized embryos using dielectrophoresis

Development of dielectrophoretic (DEP) arrays for real-time imaging of embryonic organisms is described. Microelectrode arrays were used for trapping both embryonated eggs and larval stages of Antarctic nematode Panagrolaimus davidi. Ellipsoid single-shell model was also applied to study the interactions between DEP fields and developing multicellular organisms. This work provides proof-of-concept application of chip-based technologies for the analysis of individual embryos trapped under DEP force.

Variation of yield loci in finite element analysis by considering texture evolution for AA5042 aluminum sheets

 Yield function has various material parameters that describe how materials respond plastically in given conditions. However, a significant number of mechanical tests are required to identify the many material parameters for yield function. In this study, an effective method using crystal plasticity through a virtual experiment is introduced to develop the anisotropic yield function for AA5042. The crystal plasticity approach was used to predict the anisotropic response of the material in order to consider a number of stress or strain modes that would not otherwise be evident through mechanical testing. A rate-independent crystal plasticity model based on a smooth single crystal yield surface, which removes the innate ambiguity problem within the rate-independent model and Taylor model for polycrystalline deformation behavior were employed to predict the material’s response in the balanced biaxial stress, pure shear, and plane strain states to identify the parameters for the anisotropic yield function of AA5042.

Magnetic liquid marbles : Toward “Lab in a Droplet“

Liquid marbles exhibit great potential for use as miniature labs for small-scale laboratory operations, such as experiment and measurement. While important progress has been made recently in exploring their applications as microreactions, “on-line“ measurement of the components inside the liquid still remains a challenge. Herein, it is demonstrated that “on-line“ detection can be realized on magnetic liquid marbles by taking advantage of their unique magnetic opening feature. By partially opening the particle shell, electrochemical measurement is carried out with a miniaturized three-electrode probe and the application of this technique for quantitative measurement of dopamine is demonstrated. Fully opened magnetic liquid marble makes it feasible to detect the optical absorbance of the liquid in a transmission mode. With this optical method, a glucose assay is demonstrated. Moreover, when magnetic particle shell contains low melting point material, e.g., wax, the liquid marble shows a unique encapsulation ability to form a rigid shell after heating, which facilitates the storage of the non-volatile ingredients. These unique features, together with the versatile use as microreactors, enable magnetic liquid marbles to function as a miniature lab (or called “lab in a droplet“), which may find applications in clinical diagnostics, biotechnology, chemical synthesis, and analytical chemistry.

The adoption of social media by Australian banks to communicate with the public

 This thesis focuses on social media adoption by the Australian banks as method of communication. It proposes a ‘technology independent’ adoption model with components that encompass sociotechnological factors governing the adoption of social media. The model can also be adapted by any business organisation and prove beneficial for future.

s-wave approximation for asymmetry in nonmesonic decay of finite hypernuclei

We establish the bridge between the commonly used Nabetani-Ogaito-Sato-Kishimoto (NOSK) formula for the asymmetry parameter a(Lambda) in the Lambda p -> np emission of polarized hypernuclei, and the shell-model (SM) formalism for finite hypernuclei. We demonstrate that the s-wave approximation leads to a SM formula for a(Lambda) that is as simple as the NOSK one and that reproduces the exact results for (5)(Lambda)He and (12)(Lambda)C better than initially expected. The simplicity achieved here is indeed remarkable. The new formalism makes the theoretical evaluation of a(Lambda) more transparent and explains clearly why the one-meson exchange model is unable to account for the experimental data of (5)(Lambda)He.

Transition amplitudes for the nonmesonic hypernuclear decay

We give general expressions for the two-body decomposition of the transition amplitudes for the nonmesonic decay of Lambda-hypernuclei within a finite-nucleus shell-model approach.

Avaliação de modelo matemático para estimar a radiação solar incidente sobre superfícies com diferentes exposições e declividades

Este trabalho teve por objetivo avaliar modelo matemático para estimar a radiação solar global diária sobre superfícies com diferentes exposições e declividades, no período de março de 2002 a março de 2003. A pesquisa foi desenvolvida em uma estrutura denominada Bacia Hidrográfica Experimental do Departamento de Engenharia Rural da UNESP, Câmpus de Jaboticabal - SP. Nessa estrutura, foram utilizadas superfícies caracterizadas como H, 10N, 10S, 20N, 20S, 10E, 10W, 20E e 20W. O sensor utilizado para medir a radiação solar global incidente nas superfícies estudadas foi um piranômetro da marca Kipp & Zonnen, modelo CM3. Para calcular a radiação solar incidente nas superfícies estudadas, foi utilizado o modelo de Kondratyev. As análises dos resultados foram feitas para o período diário, utilizando-se de análise de regressão e considerando o modelo linear (y = ax + b), na qual a variável dependente foi a radiação global medida (K¯M) e a radiação global calculada (K¯C) foi a variável independente. Os resultados deste estudo mostram que o modelo apresentou bons resultados para estimar a radiação nas superfícies H, 10N, 10S, 10E, 10W, 20E e 20W. Utilizando-se de dados de dias com céu límpido, foram obtidos os seguintes resultados: no inverno, o modelo foi preciso para estimar a radiação solar na superfície 20N, e apresentou resultados aceitáveis para estimar a radiação solar na superfície 20S.

Asymmetry parameter for nonmesonic hypernuclear decay

We give general expressions for the vector asymmetry in the angular distribution of protons in the nonmesonic weak decay of polarized hypernuclei. From these we derive an explicit expression for the calculation of the asymmetry parameter, a(Lambda), which is applicable to the specific cases of He-5(Lambda) and C-12(Lambda) described within the extreme shell model. In contrast to the approximate formula widely used in the literature, it includes the effects of three-body kinematics in the final states of the decay and correctly treats the contribution of transitions originating from single-proton states beyond the s-shell. This expression is then used for the corresponding numerical computation of a(Lambda) within several one-meson-exchange models. Besides the strictly local approximation usually adopted for the transition potential, we also consider the addition of the first-order nonlocality terms. We find values for a(Lambda) ranging from -0.62 to -0.24, in qualitative agreement with other theoretical estimates but in contradiction with some recent experimental determinations.