995 resultados para Geração de vapor in situ
Resumo:
Fiction stir processing (FSP) is a solid state technique used for material processing. Tool wear and the agglomeration of ceramic particles have been serious issues in FSP of metal matrix composites. In the present study, FSP has been employed to disperse the nanoscale particles of a polymer-derived silicon carbonitride (SiCN) ceramic phase into copper by an in-situ process. SiCN cross linked polymer particles were incorporated using multi-pass ESP into pure copper to form bulk particulate metal matrix composites. The polymer was then converted into ceramic through an in-situ pyrolysis process and dispersed by ESP. Multi-pass processing was carried out to remove porosity from the samples and also for the uniform dispersion of polymer derived ceramic particles. Microstructural observations were carried out using Field Emission Scanning Electron Microscopy (FE-SEM) and Transmission Electron Microscopy (TEM) of the composite. The results indicate a uniform distribution of similar to 100 nm size particles of the ceramic phase in the copper matrix after ESP. The nanocomposite exhibits a five fold increase in microhardness (260HV(100)) which is attributed to the nano scale dispersion of ceramic particles. A mechanism has been proposed for the fracturing of PDC particles during multi pass FSP. (C) 2015 Elsevier Ltd. All rights reserved
Resumo:
Fabricating supramolecular hydrogels with embedded metal nanostructures is important for the design of novel hybrid nanocomposite materials for diverse applications such as biosensing and chemosensing platforms, catalytic and antibacterial functional materials etc. Supramolecular self-assembly of bile acid-dipeptide conjugates has led to the formation of new supramolecular hydrogels. Gelation of these molecules depends strongly on the hydrophobic character of the bile acids. The possibility of in situ fabrication of Ag and Au NPs in these supramolecular hydrogels by incorporating Ag+ and Au3+ salts was investigated via photoreduction. Chemical reductions of Ag+ and Au3+ salts in the hydrogels were performed without adding any external stabilizing agents. In this report we have shown that the color, size and shape of silver nanoparticles formed by photoreduction depend on the amino acid residue of the side chain.
Resumo:
Using in situ, high-speed imaging of a hard wedge sliding against pure aluminum, and image analysis by particle image velocimetry, the deformation field in sliding is mapped at high resolution. This model system is representative of asperity contacts on engineered surfaces and die-workpiece contacts in deformation and machining processes. It is shown that large, uniform plastic strains of 1-5 can be imposed at the Al surface, up to depths of 500 mu m, under suitable sliding conditions. The spatial strain and strain rate distributions are significantly influenced by the initial deformation state of the Al, e.g., extent of work hardening, and sliding incidence angle. Uniform straining occurs only under conditions of steady laminar flow in the metal. Large pre-strains and higher sliding angles promote breakdown in laminar flow due to surface fold formation or flow localization in the form of shear bands, thus imposing limits on uniform straining by sliding. Avoidance of unsteady sliding conditions, and selection of parameters like sliding angle, thus provides a way to control the deformation field. Key characteristics of the sliding deformation such as strain and strain rate, laminar flow, folding and prow formation are well predicted by finite element simulation. The deformation field provides a quantitative basis for interpreting wear particle formation. Implications for engineering functionally graded surfaces, sliding wear and ductile failure in metals are discussed.
Resumo:
The influence of Pt layer thickness on the fracture behavior of PtNiAl bond coats was studied in situ using clamped micro-beam bend tests inside a scanning electron microscope (SEM). Clamped beam bending is a fairly well established micro-scale fracture test geometry that has been previously used in determination of fracture toughness of Si and PtNiAl bond coats. The increasing amount of Pt in the bond coat matrix was accompanied by several other microstructural changes such as an increase in the volume fraction of alpha-Cr precipitate particles in the coating as well as a marginal decrease in the grain size of the matrix. In addition, Pt alters the defect chemistry of the B2-NiAl structure, directly affecting its elastic properties. A strong correlation was found between the fracture toughness and the initial Pt layer thickness associated with the bond coat. As the Pt layer thickness was increased from 0 to 5 mu m, resulting in increasing Pt concentration from 0 to 14.2 at.% in the B2-NiAl matrix and changing alpha-Cr precipitate fraction, the initiation fracture toughness (K-IC) was seen to rise from 6.4 to 8.5 MPa.m(1/2). R-curve behavior was observed in these coatings, with K-IC doubling for a crack propagation length of 2.5 mu m. The reasons for the toughening are analyzed to be a combination of material's microstructure (crack kinking and bridging due to the precipitates) as well as size effects, as the crack approaches closer to the free surface in a micro-scale sample.
Resumo:
Hollow nanomaterials have attracted a lot of interest by virtue of their wide range of applications that arise primarily due to their unique architecture. A common strategy to synthesize hollow nanomaterials is by nucleation of the shell material over a preformed core and subsequent dissolution of the core in the second step. Herein an ultrafast, microwave route has been demonstrated, to synthesize PdO nanotubes in a single step using ZnO as a sacrificial template. The mechanism of the nanotube formation has been investigated in detail using control experiments. By tuning the starting ratio of PdCl2 : ZnO, hollow to hybrid PdO nanostructures could be obtained using the same method. Conversion of the PdO to Pd nanotubes has been shown by simple NaBH4 treatment. The thermal stability of the PdO nanotubes has been studied. The insights presented here are general and applicable for the synthesis of hybrids/hollow structures in other systems as well.
Resumo:
In-situ dark and light IV characteristics of inverted P3HT-PCBM devices on flexible glass substrates were measured while bending. Bending set up was simple and home built with servo controlled 2 parallel plate movements. ITO was sputter coated onto the thin flexible glass sheets of 25mmx25mm size in the lab. OPV devices were fabricated inside the glove box and conversion efficiency measured was about 2.8%. Bending of the device substrates and simultaneous PV measurements were carried out in ambient conditions. It was observed that the J(SC) and efficiency increased until the substrate breaking point but the V-OC and fill factor remained unchanged.
Resumo:
This study reports a multinuclei in situ (real-time) NMR spectroscopic characterization of the electrochemical reactions of a negative Cu3P electrode toward lithium. Taking advantage of the different nuclear spin characteristics, we have obtained real-time P-31 and Li-7 NMR data for a comprehensive understanding of the electrochemical mechanism during the discharge and charge processes of a lithium battery. The large NMR chemical shift span of P-31 facilitates the observation of the chemical evolutions of different lithiated and delithiated LixCu3-xP phases, whereas the quadrupolar line features in Li-7 enable identification of asymmetric Li sites. These combined NMR data offer an unambiguous identification of four distinct LixCu3-xP phases, Cu3P, Li0.2Cu2.8P, Li2CuP, and. Li3P, and the characterization of their involvement in the electrochemical reactions. The NMR data led us to propose a delithiation process involving the intercalation of metallic Cu-0 atomic aggregates into the Li2CuP structure to form a Cu-0-Li2-xCu1-xP phase. This process might be responsible for the poor capacity retention in Cu3P lithium batteries when cycled to a low voltage.
Resumo:
A new in situ method was realized by one step laser cladding to produce Ni-base alloy composite coating reinforced by in situ reacted and gradiently distributed TiCp particles. The submicron TiCp particles were formed and uniformly distributed because of the in situ reaction and trapping effect under the rapid solidification condition. And, TiCp particles were of gradient distribution on a macro scale and their volume fraction increased from 1.86% at the layer/substrate interface to a maximum 38.4% at the surface of the layer. Furthermore, the in situ generated TiCp/gamma-Ni interfaces were free from deleterious surface reactions. Additionally, the clad coating also revealed a high microhardness of gradient variation with the layer depth and the superior abrasive wear resistance.
Resumo:
Titanium carbide reinforced nickel aluminide matrix in situ composites were produced using a newly patented laser melting furnace. Microstructure of the laser melted TiC/(Ni3Al–NiAl) in situ composites was characterized by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results showed that the constituent phases in the laser melted in situ composites are TiC, Ni3Al and NiAl. Volume fraction of TiC and NiAl increase with increasing content of titanium and carbon. The growth morphology of the reinforcing TiC carbide has typically faceted features, indicating that the lateral growth mechanism is still predominant growth mode under rapid.
Resumo:
The adsorption Of DL-homocysteine (Hcy) and L-homocysteine thiolactone (HTL) on Au(1 1 1) electrode was investigated in 0.1 M HClO4 by cyclic voltammetry and in situ scanning tunneling microscopy (STM). Hcy and HTL molecules formed highly ordered adlayers on Au(1 1 1) surface. High-resolution STM images revealed the orientation and packing arrangement in the ordered adlayers. Hcy molecules formed (2root3 x 3root3)R30degrees adlayer structure and H-bonds between carboxyl groups were assumed to be responsible for the origin of tail-to-tail or head-to-head molecular arrangement, while HTL molecules formed (4 x 6) adlayer structure, and two different orientations and appearances in the ordered adlayer were found. Structural models were proposed for the two adlayers.
Resumo:
Se determinó la digestibilidad de los pastos Angleton, Colonial y Taiwan mediante el método in situ, disponiendo para ello de tres novillos de la raza criolla Reyna cuya edad oscilaba entre 12 y 18 meses y con un peso promedio de 261 kg, los cuales estuvieron provistos de una fístula ruminal. El objetivo propuesto fue obtener y comparar los estimados cuantitativos relativos a la degradación ruminal a diferentes tiempos de incubación (24,48 y 72 horas} tanto de materia seca como de proteína bruta. Los pastos fueron cosechados a los 35 días después del rebrote y se analizaron químicamente según procedimientos de la A.O.A.C (1984) para materia seca (MS), proteína bruta (PB), extracto etéreo (EE), extracto libre de nitrógeno (ELN), fibra bruta (FB) y cenizas (C) (Weende), y según el método de Van Soest (CATIE, 1987) para fibra neutro detergente (FND)y fibra ácido detergente (FAD), así como Hemicelulosa (HC). Se incubaron 10 gr de las muestras de cada uno de los pastos en bolsas de nylon. Para analizar estadísticamente los valores de degradación obtenidos, se utilizaron análisis de varianza dentro de un DCA para determinar la significancia entre pastos en los tiempos medidos y prueba de rango múltiple de Duncan para comparar medias de los pastos dentro de cada tiempo, obteniéndose diferencias altamente significativas entre ellos (P <0.01), y al observar la separación de medias se manifestó la superioridad del Taiwan en todos los tiempos de incubación, sin embargo el Colonial, no presentó diferencias significativas con el Taiwan y el Angleton en el tiempo de 72 horas. Se concluye como resultado de este estudio, que a una edad de rebrote de 35 días, el. Taiwán es superior al Angleton y al Colonial en lo que respecta a solubilidad de materia seca v proteína bruta al mismo tiempo el Colonial. mostró superioridad ante el Angl.eton debido a su mayor solubilidad de materia seca. Las mayores degradaciones de materia seca se presentaron en el. período de 0 a 24 horas de fermentación para los tres pastos; en cambio para proteína bruta ocurrieron para el. Angleton y el Taiwán entra 1as 24 y 48 horas y para e1 Colonia1 entre O y 24 horas. En qenera1, a través de la dinámica de digestión de 1os pastos se observó la influencia negativa que ejerce proporcionalmente a su contenido, la fracción de fibra (fibra neutro detergente y fibra acido detergente).
Resumo:
El presente trabajo se realizó en la Hda. Las Mercedes, perteneciente a la Universidad Nacional Agraria, Situada en el Kilómetro once y medio carretera Norte, Managua, con el objetivo de determinar el valor nutritivo del afrecho de cerveza y la degradación de la MS y PB del mismo, por un tiempo determinado. Se empleó una vaca adulta, con previa fistulación, el manejo de la vaca fue similar al que se utiliza en la Hacienda. El afrecho de cerveza fue secado y molido y se efectúo análisis bromatológico según metodología de la A.O.A.C. (1984). Se incubaron en el rumen de la vaca fistulada ocho bolsas con 10 grs. de afrecho de cerveza cada una, para ser sacadas las bolsas de dos en dos en loa intervalos de tiempo de 6, 12, 24 y 48 hrs., se cálculo el porcentaje de MS y PB según metodología A.O.A.C. (1984). Además se utilizó una bolsa testigo, conteniendo también 10 grs. de afrecho de cerveza, la cual sirvió para determinar las pérdidas de MS y PB que se dieron por el lavado o por rápida solubilización, conocido como tiempo cero. Calculándose el porcentaje de degradación, de la MS (44.9, 60.2, 61.2 y 73.0) y la PB (60.6, 79.5, 83.8 y 93.3); se hicieron curvas de degradación según ecuación; D = A+B(l-e-ct)de Orskov y McDonald (1979). Donde los porcentajes de la ecuación para la MS fueron de 44.9, 63.0, 77.3, 82.2 y para la PB de 60.2, 82.3, 93.9 y 95.9. Se efectuó la prueba de t (student) para datos pareados, para comparar, la degradación de la MS y PB de la parte experimental vs la degradación de la ecuación, para lo cual se encontró, que no existen diferencias significativas (P<0.05), tanto para la MS experimental vs MS ecuación, como para la PB experimental vs PB ecuación. Lo cual indica que la estimación es eficiente. Se concluyó, que el afrecho de cerveza según su valor nutritivo y tasa de degradación, puede ser considerado un suplemento proteico de lenta degradación. La máxima degradación de la MS y PB, fue a las 48 horas, presentando porcentajes altos de degradación 73% y 93.3% respectivamente.
Resumo:
La prospección y caracterización preliminar in situ de Manilkara zapota L. y Chrysophyllum cainita L. fue realizado en todo Nicaragua. Inicialmente se recopiló toda información existente a cerca de estas especies, luego se realizó un inventario y caracterización in situ; además se obtuvo información a través de entrevistas realizadas a los poseedores de los árboles y se registraron con fichas de datos etnobotánicos, finalmente se elaboró una guía de descriptores básicos permitiendo la toma de datos tanto cuantitativos como cualitativos. Para la interpretación de los caracteres cualitativos se utilizó la ficha de inventarios de la caracterización preliminar y los caracteres cuantitativos obtenidos en las giras de colectas se introdujeron en una base de datos para luego ser procesados a través del programa de análisis estadístico SAS; además se realizó un análisis de agrupamiento, seleccionándose para este fin el análisis de conglomerados (Cluster analysis). Se hizo referencia a aspectos económicos y sociales, así se determinó que los nombres comunes varían de acuerdo a la zona, región y lengua; en cuanto al uso se establece que el más frecuente es el consumo de fruto fresco, pero también se le atribuyen propiedades medicinales y maderables. Existe poca información sobre las tazas de producción y consumo, la comercialización de su fruto es a nivel interno dentro de los diferentes mercados locales de las regiones y por lo general estas especies se encuentran como árboles aislados entre otros frutales a nivel de huertos familiares y raramente se encuentran manejados como plantaciones comerciales debido a que la producción es a largo plazo, esto sumado a la introducción de frutas exóticas causan la erosión genética de las especies. La mayor distribución de ambas especies se encontró en la región ecológica 1, presentando el 83.58 por ciento del total de muestras evaluadas para Manilkara zapota L (146 muestras evaluadas) y 56.47 por ciento para Chrysophyllum cainito L (85 muestras evaluadas); esto se debe a que esta región presenta condiciones adecuadas para el establecimiento de Sapotáceas.