Generational effects on adult height in individual heterogeneity

As adult height is a well-established retrospective measure of health and standard of living, it is important to understand the factors that determine it. Among them, the influence of socio-environmental factors has been subjected to empirical scrutiny. This paper explores the influence of generational (or environmental) effects and individual and gender-specific heterogeneity on adult height. Our data set is from contemporary Spain, a country governed by an authoritarian regime between 1939 and 1977. First, we use normal position and quantile regression analysis to identify the determinants of self-reported adult height and to measure the influence of individual heterogeneity. Second, we use a Blinder-Oaxaca decomposition approach to explain the `gender height gap¿ and its distribution, so as to measure the influence on this gap of individual heterogeneity. Our findings suggest a significant increase in adult height in the generations that benefited from the country¿s economic liberalization in the 1950s, and especially those brought up after the transition to democracy in the 1970s. In contrast, distributional effects on height suggest that only in recent generations has ¿height increased more among the tallest¿. Although the mean gender height gap is 11 cm, generational effects and other controls such as individual capabilities explain on average roughly 5% of this difference, a figure that rises to 10% in the lowest 10% quantile.

Generational effects on adult height in individual heterogeneity

As adult height is a well-established retrospective measure of health and standard of living, it is important to understand the factors that determine it. Among them, the influence of socio-environmental factors has been subjected to empirical scrutiny. This paper explores the influence of generational (or environmental) effects and individual and gender-specific heterogeneity on adult height. Our data set is from contemporary Spain, a country governed by an authoritarian regime between 1939 and 1977. First, we use normal position and quantile regression analysis to identify the determinants of self-reported adult height and to measure the influence of individual heterogeneity. Second, we use a Blinder-Oaxaca decomposition approach to explain the `gender height gap¿ and its distribution, so as to measure the influence on this gap of individual heterogeneity. Our findings suggest a significant increase in adult height in the generations that benefited from the country¿s economic liberalization in the 1950s, and especially those brought up after the transition to democracy in the 1970s. In contrast, distributional effects on height suggest that only in recent generations has ¿height increased more among the tallest¿. Although the mean gender height gap is 11 cm, generational effects and other controls such as individual capabilities explain on average roughly 5% of this difference, a figure that rises to 10% in the lowest 10% quantile.

The use of micro-XRD for the study of glaze color decorations

The compounds responsible for the colours and decorations in glass and glazed ceramics include: colouring agents (transition metal ions), pigments (micro-and nano-precipitates of compounds that either do not dissolve or recrystallize in the glassy matrix) and opacifiers (microcrystalline compounds with high light scattering capability). Their composition, structure and range of stability are highly dependent not only on the composition but also on the procedures followed to obtain them. Chemical composition of the colorants and crystallites may be obtained by means of SEM-EDX and WDX. Synchrotron Radiation micro-X-ray Diffraction has a small beam size adequate (10 to 50 microns footprint size) to obtain the structural information of crystalline compounds and high brilliance, optimal for determining the crystallites even when present in low amounts. In addition, in glass decorations the crystallites often appear forming thin layers (from 10 to 100 micrometers thick) and they show a depth dependent composition and crystal structure. Their nature and distribution across the glass/glazes decorations gives direct information on the technology of production and stability and may be related to the color and appearance. A selection of glass and glaze coloring agents and decorations are studied by means of SR-micro- XRD and SEM-EDX including: manganese brown, antimony yellow, red copper lusters and cobalt blue. The selection includes Medieval (Islamic, and Hispano Moresque) and renaissance tin glazed ceramics from the 10th to the 17th century AD.

Los individuos en el espacio doméstico en la protohistoria de Cataluña

Los trabajos sobre demografía protohistórica suelen estimar el número de habitantes por asentamiento a partir de dos métodos básicos: el primero basado en el cálculo del espacio útil total dedicado a habitación; el segundo a partir del número de casas. El primer método implica una asignación igualitaria de espacio entre los habitantes, mientras el segundo suele atribuir un número fi jo de personas por casa, lo que implica mayor superfi cie por habitante cuanto mayor es la casa. Ambos métodos son igualmente viables para un cálculo global de la población del asentamiento, pero ninguno de ellos es totalmente satisfactorio, ya que no tienen en cuenta la posibilidad de una repartición del espacio de forma desigual o de la coexistencia de grupos domésticos de distintos tamaños en un mismo asentamiento. A partir de la reflexión crítica sobre estos métodos, proponemos utilizar el análisis del uso del espacio doméstico como indicador social y como base para plantear hipótesis sobre la composición de la estructura familiar en la protohistoria así como los cambios que ésta sufre a lo largo del tiempo.

Faunistic analysis of Carabidae and Staphylinidae (Coleoptera) in five agroecosystems in northeastern São Paulo state, Brazil

The objective of this study was to determined species composition and community structure of Carabidae and Staphylinidae in five areas of forest fragment and soybean/corn crops or orange orchard, from December 2004 to May 2007. Beetles were captured in pitfall traps distributed along two parallel transects of 200 m in length, placed across crop land/forest boundary fragment, with 100 m each. The Shannon-Wiener diversity and evenness indexes and Morisita similarity index were calculated. The carabids Abaris basistriatus Chaudoir, Calosoma granulatum Perty, Megacephala brasiliensis Kirby, Odontochila nodicornis (Dejean) and Selenophorus seriatoporus Putzeys. are dominant and are widely distributed in northeastern São Paulo state, Brazil. Point-scale species diversity was greatest at the transition between forest fragment and cultivated area. The carabid and staphylinid communities of the forest fragment were more similar to the community of orange orchard than that of soybean/corn crops.

The ABCG transporter PEC1/ABCG32 is required for the formation of the developing leaf cuticle in Arabidopsis.

The cuticle is an essential diffusion barrier on aerial surfaces of land plants whose structural component is the polyester cutin. The PERMEABLE CUTICLE1/ABCG32 (PEC1) transporter is involved in plant cuticle formation in Arabidopsis. The gpat6 pec1 and gpat4 gapt8 pec1 double and triple mutants are characterized. Their PEC1-specific contributions to aliphatic cutin composition and cuticle formation during plant development are revealed by gas chromatography/mass spectrometry and Fourier-transform infrared spectroscopy. The composition of cutin changes during rosette leaf expansion in Arabidopsis. C16:0 monomers are in higher abundance in expanding than in fully expanded leaves. The atypical cutin monomer C18:2 dicarboxylic acid is more prominent in fully expanded leaves. Findings point to differences in the regulation of several pathways of cutin precursor synthesis. PEC1 plays an essential role during expansion of the rosette leaf cuticle. The reduction of C16 monomers in the pec1 mutant during leaf expansion is unlikely to cause permeability of the leaf cuticle because the gpat6 mutant with even fewer C16:0 monomers forms a functional rosette leaf cuticle at all stages of development. PEC1/ABCG32 transport activity affects cutin composition and cuticle structure in a specific and non-redundant fashion.

Surface Studies of Thiolate Adsorbates on Some Metals

The results and discussions in this thesis are based on my studies about selfassembled thiol layers on gold, platinum, silver and copper surfaces. These kinds of layers are two-dimensional, one molecule thick and covalently organized at the surface. They are an easy way to modify surface properties. Self-assembly is today an intensive research field because of the promise it holds for producing new technology at nanoscale, the scale of atoms and molecules. These kinds of films have applications for example, in the fields of physics, biology, engineering, chemistry and computer science. Compared to the extensive literature concerning self-assembled monolayers (SAMs) on gold, little is known about the structure and properties of thiolbased SAMs on other metals. In this thesis I have focused on thiol layers on gold, platinum, silver and copper substrates. These studies can be regarded as a basic study of SAMs. Nevertheless, an understanding of the physical and chemical nature of SAMs allows the correlation between atomic structure and macroscopic properties. The results can be used as a starting point for many practical applications. X-ray photoelectron spectroscopy (XPS) and synchrotron radiation excited high resolution photoelectron spectroscopy (HR-XPS) together with time-offlight secondary ion mass spectrometry (ToF-SIMS) were applied to investigate thin organic films formed by the spontaneous adsorption of molecules on metal surfaces. Photoelectron spectroscopy was the main method used in these studies. In photoelectron spectroscopy, the sample is irradiated with photons and emitted photoelectrons are energy-analyzed. The obtained spectra give information about the atomic composition of the surface and about the chemical state of the detected elements. It is widely used in the study of thin layers and is a very powerful tool for this purpose. Some XPS results were complemented with ToF-SIMS measurements. It provides information on the chemical composition and molecular structure of the samples. Thiol (1-Dodecanethiol, CH3(CH2)11SH) solution was used to create SAMs on metal substrates. Uniform layers were formed on most of the studied metal surfaces. On platinum, surface aligned molecules were also detected in investigations by XPS and ToF-SIMS. The influence of radiation on the layer structure was studied, leading to the conclusion that parts of the hydrocarbon chains break off due to radiation and the rest of the layer is deformed. The results obtained showed differences depending on the substrate material. The influence of oxygen on layer formation was also studied. Thiol molecules were found to replace some of the oxygen from the metal surfaces.

Analysis of testicular cell populations using flow cytometry

Studying testis is complex, because the tissue has a very heterogeneous cell composition and its structure changes dynamically during development. In reproductive field, the cell composition is traditionally studied by morphometric methods such as immunohistochemistry and immunofluorescence. These techniques provide accurate quantitative information about cell composition, cell-cell association and localization of the cells of interest. However, the sample preparation, processing, staining and data analysis are laborious and may take several working days. Flow cytometry protocols coupled with DNA stains have played an important role in providing quantitative information of testicular cells populations ex vivo and in vitro studies. Nevertheless, the addition of specific cells markers such as intracellular antibodies would allow the more specific identification of cells of crucial interest during spermatogenesis. For this study, adult rat Sprague-Dawley rats were used for optimization of the flow cytometry protocol. Specific steps within the protocol were optimized to obtain a singlecell suspension representative of the cell composition of the starting material. Fixation and permeabilization procedure were optimized to be compatible with DNA stains and fluorescent intracellular antibodies. Optimization was achieved by quantitative analysis of specific parameters such as recovery of meiotic cells, amount of debris and comparison of the proportions of the various cell populations with already published data. As a result, a new and fast flow cytometry method coupled with DNA stain and intracellular antigen detection was developed. This new technique is suitable for analysis of population behavior and specific cells during postnatal testis development and spermatogenesis in rodents. This rapid protocol recapitulated the known vimentin and γH2AX protein expression patterns during rodent testis ontogenesis. Moreover, the assay was applicable for phenotype characterization of SCRbKO and E2F1KO mouse models.

Kindergarten characteristics and risk-taking behaviors in middle childhood = Caractéristiques à la maternelle et comportements de prise de risques en 6e année

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Étude comparative des propagules extraracinaires et intraracinaires du champignon mycorhizien Glomus irregulare

La germination des spores est une étape essentielle dans le cycle de vie de la majorité des champignons filamenteux. Les champignons mycorhiziens à arbuscules (CMA) forment un certain nombre de propagules infectieuses différentes qui augmentent leur potentiel à coloniser les racines. Parmi elles se trouvent les spores extraracinaires et intraracinaires. La paroi cellulaire des spores joue un rôle majeur dans la survie de ces propagules en étant une barrière physique et osmotique. Puisque une cellule peut faire des ajustements considérables dans la composition et la structure de sa paroi, en réponse aux conditions environnementales, il est possible que les parois des spores intraracinaires et extraracinaires montrent des propriétés mécaniques et osmotiques différentes affectant leur germination et leur survie. Pourtant, contrairement à la connaissance de la génétique moléculaire et de la formation de la paroi cellulaire des CMA, peu d’information est disponible au sujet de ces propriétés mécaniques. Les informations sur la germination des CMA dans des conditions hypertoniques sont aussi rares, et les modèles expérimentaux ne séparent généralement pas les effets directs de la forte pression osmotique externe sur la germination des champignons et les effets attribuables aux plantes. Cette étude avait pour but de répondre à deux importantes séries de questions concernant le comportement des spores mycorhiziennes. Nous avons d'abord déterminé la relation entre la composition de la paroi cellulaire, la structure et les propriétés mécaniques du champignon modèle Glomus irregulare (isolat DAOM 197198). La micro-indentation a été utilisée pour mesurer quantitativement les propriétés mécaniques de la paroi cellulaire. La composition (contenu de chitine et de glomaline) de la paroi cellulaire a été quantifiée par immunofluorescence tandis que la microscopie optique a été utilisée pour mesurer l'épaisseur de la paroi cellulaire. La densité locale en glomaline et l’épaisseur de la paroi étaient significativement plus élevées pour les parois des spores extraracinaires alors que la densité locale en chitine et la rigidité n’ont pas montré de variations entre les spores extraracinaires et intraracinaires. La grande variabilité dans les paramètres étudiés nous a empêchés de cibler un facteur principal responsable de la force totale de la paroi lors de la compression. La diminution des concentrations de chitine et de glomaline a été corrélée à l'évolution de la paroi du champignon au cours de son cycle de vie. On a aussi observé une composition différentielle des couches de la paroi: les polymères de chitine et de glomaline furent localisés principalement dans les couches externes et internes de la paroi, respectivement. Dans la deuxième partie de notre travail, nous avons exploré les effets directs d'engrais, par rapport à leur activité de l'eau (aw), sur la germination des spores et la pression de turgescence cellulaire. Les spores ont été soumises à trois engrais avec des valeurs de aw différentes et la germination ainsi que la cytorrhyse (effondrement de la paroi cellulaire) des spores ont été évaluées après différents temps d'incubation. Les valeurs de aw des engrais ont été utilisées comme indicateurs de leurs pressions osmotiques. L'exposition des spores de Glomus irregulare au choc osmotique causé par les engrais dont les valeurs de aw se situent entre 0,982 et 0,882 a provoqué des changements graduels au niveau de leur cytorrhyse et de leur germination. Avec l'augmentation de la pression de turgescence externe, la cytorrhyse a augmenté, tandis que le taux de germination a diminué. Ces effets ont été plus prononcés à des concentrations élevées en éléments nutritifs. La présente étude, bien qu’elle constitue une étape importante dans la compréhension des propriétés mécaniques et osmotiques des spores de CMA, confirme également que ces propriétés dépendent probablement de plusieurs facteurs, dont certains qui ne sont pas encore identifiés.

La conservation de la biodiversité dans les aires protégées en zones périurbaines : dynamique des communautés végétales au parc national du Mont-Saint-Bruno entre 1977 et 2013

Ce mémoire visait à déterminer si un petit parc périurbain, en l’occurrence le Parc national du Mont-Saint-Bruno, est parvenu à maintenir l’intégrité de sa flore au cours des trente dernières années en dépit de pressions humaines croissantes et de perturbations naturelles passées, en plus d’identifier les principaux changements floristiques survenus au cours de cette période et les facteurs responsables. Pour répondre à ces objectifs, une étude historique a été réalisée, en comparant un inventaire floristique ancien (1977) à un inventaire récent (2013). Mes résultats montrent d’abord une forte croissance de la diversité alpha indigène au cours des 35 dernières années, accompagnée d’un déclin significatif de la diversité bêta (30%). Malgré cette homogénéisation taxonomique, la diversité fonctionnelle de la flore forestière s’est accrue, la rendant probablement plus résiliente aux événements perturbateurs. D’autre part, mes analyses ont révélé la progression de traits fonctionnels souvent associés à des habitats forestiers intensément broutés, révélant une certaine influence du cerf de Virginie sur la composition et la structure de la flore forestière. Enfin, mes résultats ont montré que les herbiers botaniques se révèlent être une alternative fiable aux méthodes traditionnelles pour documenter et évaluer l’impact des grands herbivores sur la morphologie des plantes broutées. Au final, cette étude a montré que les petites aires protégées périurbaines peuvent jouer un rôle majeur dans la préservation de la diversité floristique d’habitats forestiers d’intérêt, particulièrement lorsque leur statut de protection permet d’encadrer de manière stricte les activités humaines.

The role of lower partial moments in stochastic modeling

Lower partial moments plays an important role in the analysis of risks and in income/poverty studies. In the present paper, we further investigate its importance in stochastic modeling and prove some characterization theorems arising out of it. We also identify its relationships with other important applied models such as weighted and equilibrium models. Finally, some applications of lower partial moments in poverty studies are also examined

Desigualdad, educación y crecimiento económico

Este documento plantea un modelo teórico de generales traslapadas en el que se resalta la importancia de la educación pública como instrumento para reducir las brechas salariales, asimismo, considera la relación inversa entre la desigualdad en la distribución del ingreso y el crecimiento económico de un país. Por último, resalta la importancia del capital humano como fuente del desarrollo de un país, en la medida que éste es un insumo para la producción y estimula la acumulación de capital físico.

A segurança estrutural na reabilitação de património habitacional composto por elementos pré-fabricados

Pretende-se no presente artigo analisar a segurança estrutural do tipo de edificações referido, durante o seu processo de reabilitação. Considerando a existência de três momentos diferentes – o período antecedente ao início dos trabalhos, o intervalo de tempo correspondente ao decurso dos trabalhos de reabilitação e o período posterior, correspondente à futura utilização do património, é sobre o segundo que incidirá a nossa análise, por ser aquele em que a estrutura se encontra mais fragilizada, implicando uma menor segurança estrutural, que tende a ser desvalorizada, por ter uma natureza temporária. Numa primeira fase descreve-se o existente, assim como as alterações arquitetónicas propostas. Posteriormente indicam-se os potenciais danos estruturais resultantes das alterações pretendidas e as principais medidas a considerar para os evitar. Numa fase posterior propõe-se a sequenciação dos trabalhos de modo a evitar um colapso parcial ou global e, por último, apresentam-se conclusões e sugerem-se desenvolvimentos futuros. / The present work seeks to present an analysis related to the structural safety of prefabricated buildings, referred above, associated it’s rehabilitation process. Considering the existence of three different moments – a first period before the beginning of the works, a second one correspondent to the rehabilitation procedures and a last one related with the future utilization of the patrimony, this article will focus on the second period, because during that gap of time, the structure is usually weakened, which implies a lower structural safety that tends to be ignored, due to its temporary nature. In a first moment, the existing construction is described, as well as the architectonical proposals. Afterwards, are referred the potential structural damages resultant of the architectonical proposals and the measures to implemented to prevent them. In the posterior phase we propose the work sequence, in order to avoid a partial or global collapse and, finally, we reach some conclusions and suggest other works to be developed in the future.

A segurança estrutural relacionada com a escavação sob fundações de edifícios pré-existentes

Pretende-se no presente artigo analisar a segurança estrutural de edificações condicionadas por escavações a um nível inferior ao das suas fundações. Considerando a existência de três momentos diferentes – o período antecedente ao início dos trabalhos, o intervalo de tempo correspondente ao decurso dos trabalhos de reabilitação e o período posterior, correspondente à futura utilização do património, é sobre o segundo que incidirá a nossa análise, por ser aquele em que a estrutura se encontra mais fragilizada, implicando uma menor segurança estrutural, que tende a ser desvalorizada, por ter uma natureza temporária. Numa primeira fase descreve-se o existente, assim como as intervenções propostas. Posteriormente indicam-se os potenciais danos estruturais resultantes das alterações pretendidas e as principais medidas a considerar para os evitar. Numa fase posterior propõe-se a sequenciação dos trabalhos de modo a evitar um colapso parcial ou global e, por último, apresentam-se conclusões e sugerem-se desenvolvimentos futuros. / The present work seeks to present an analysis related to the structural safety of buildings that are object of excavations at a lower level than their foundations. Considering the existence of three different moments – a first period before the beginning of the works, a second one correspondent to the rehabilitation procedures and a last one related with the future utilization of the patrimony, this article will focus on the second period, because during that gap of time, the structure is usually weakened, which implies a lower structural safety that tends to be ignored, due to its temporary nature. In the first phase, the existing construction is described, as well as the proposed interventions. Afterwards, are referred the potential structural damages resultant of the architectonical proposals and the measures to implemented to prevent them. In the posterior phase we propose the work sequence, in order to avoid a partial or global collapse and, finally, we reach some conclusions and suggest other works to be developed in the future.