CODE final product series for the IGS

CODE, the Center for Orbit Determination in Europe, is a joint venture of the following four institutions:Astronomical Institute, University of Bern (AIUB), Bern, Switzerland; Federal Office of Topography swisstopo, Wabern, Switzerland; Federal Agency of Cartography and Geodesy (BKG), Frankfurt a. M., Germany; Institut für Astronomische und Physikalische Geodäsie, Technische Universität München (IAPG, TUM), Munich, Germany. It acts as a global analysis center of the International GNSS Service (IGS). The operational computations are performed at AIUB using the latest development version of the Bernese GNSS Software. In this context a final solution series is generated considering all active GPS and GLONASS satellites. It is published in daily files with a delay of about two weeks.

Características bioativas, funcionais e efeito protetor do resíduo desidratado de camu-camu (Myrciaria dubia H.B.K. (McVaugh)) sobre doenças degenerativas utilizando modelos in vivo C. elegans

Camu-camu (Myrciaria dubia H.B.K. (McVaugh)) is a native Amazon fruit, recognized worldwide as one of the main natural sources of ascorbic acid. Due to its great acidity, this fruit is generally consumed after processing into juice or as ingredient in food preparations. As a co-product of the camu-camu processing, a significant amount of agroindustrial residue is generated. Despite the studies showing the bioactive value and biological potential of the fruit, few studies have approached the possible processing techniques, transformation and preservation of camu-camu fruits and its agroindustrial pomace. Therefore, the present work has the objective of evaluating two different drying processes applied to camu-camu pomace (peel and seeds with residual pulp), freeze drying and hot air drying, in order to obtain a functional fruit product. This thesis was divided into three stages: the first one shows the studies related to the freeze drying and hot air drying, where we demonstrated the impact of the selected drying techniques on the bioactive components of camu-camu, taking the fresh pomace as the control group. Among the investigated conditions, the groups obtained at 50ºC and 4 m/s (SC50) and 80ºC and 6 m/s (SC80) were selected as for further studies, based on their ascorbic acid final content and Folin-Ciocalteau reducing capacity. In addition to SC50 and SC80, the fresh pomace (RF) and freeze dried (RL) samples were also evaluated in these further stages of the research. Overall, the results show higher bioactive concentration in the RF samples, followed by RL, SC50 and SC80. On the second step of the research, the antioxidant, antimicrobial and antienzymatic activities were evaluated and the same tendency was observed. It was also reported, for the first time in the literature, the presence of syringic acid in dried camu-camu pomace. In the third and final stage of the research, it was investigated the effect of dried camu-camu on aging and neuroprotective disorders, using the in vivo model C.elegans. It was observed that camu-camu extracts were able to modulate important signaling genes relevant to thermal and oxidative stresses (p < 0.05). The polar acid, polar basic and polar neutral fractions obtained from the low molecular extracts of SC50 were able to extend the lifespan of wild type N2 C. elegans in 20% and 13% (p < 0.001). Results also showed that the paralysis induced by the β1-42 amyloid was significantly (p < 0.0001) retarded in CL4176 worms. Similarly, the camu-camu extracts attenuated the dopaminergic induction associated to Parkinson’s disease. Finally, a global analysis of the data presented here reveal that the camu-camu pomace, a co-product obtained from the industrial processing of a native Brazilian fruit, is a relevant natural source of health relevant compounds. This thesis, shows for the first time, the multifunctionality of camu-camu pomace, a natural resource still underexploited for scientific, commercial and technological purposes.

Pseudo-Reimannian metrics with parallel spinor fields and vanishing Ricci tensor

I discuss geometry and normal forms for pseudo-Riemannian metrics with parallel spinor fields in some interesting dimensions. I also discuss the interaction of these conditions for parallel spinor fields with the condition that the Ricci tensor vanish (which, for pseudo-Riemannian manifolds, is not an automatic consequence of the existence of a nontrivial parallel spinor field).

Calibrated embeddings in the special Lagrangian and coassociative cases

Every closed, oriented, real analytic Riemannian 3-manifold can be isometrically embedded as a special Lagrangian submanifold of a Calabi-Yau 3-fold, even as the real locus of an antiholomorphic, isometric involution. Every closed, oriented, real analytic Riemannian 4-manifold whose bundle of self-dual 2-forms is trivial can be isometrically embedded as a coassociative submanifold in a G_2-manifold, even as the fixed locus of an anti-G_2 involution. These results, when coupled with McLean's analysis of the moduli spaces of such calibrated submanifolds, yield a plentiful supply of examples of compact calibrated submanifolds with nontrivial deformation spaces.

Rendimiento escolar e tipos de errores en la lectura en los niños con alteraciones de la función visual

Se desarrolló un estudio descriptivo con el objetivo de evaluar el rendimiento escolar así como tipos de errores en la lectura en niños con alteraciones de la función visual. En el estudio participaron 672 niños del Municipio de Lisboa (7.69±1.19 años): grupo de control (función visual normal=562) y grupo experimental (alteraciones da función visual=110). Se cuestionaron 34 profesores acerca del rendimiento escolar y lectura a través de un cuestionario validado. Para la evaluación en la lectura se empleó la prueba de lectura de 34 palabras sueltas. Los niños con la función visual alterada mostraron niveles más bajos de rendimiento escolar. Estaban en el nivel "negativo" del 10,9% de los niños con la función visual alterada y sólo del 5,3% de los niños con la función visual normal. Estos niños comenten más errores en la lectura (p<0,001) con un mayor número de no palabras (3,09±5,20) en comparación con los niños con la función visual normal (1,44±3,09). Comenten también más omisiones y adiciones de letras y confusiones de grafema, teniendo dificultades en el análisis global de la palabra. Se propone un modelo de orientación para los profesores.

Tratamentos de superfície em rolhas de cortiça

Este trabalho foi desenvolvido na empresa Amorim & Irmãos, SA e teve dois objectivos fundamentais. O primeiro centrou-se na análise do processo de tratamento de superfície das rolhas, procurando um produto alternativo ao actualmente implementado na empresa e a sua optimização. O segundo objectivo foi a elaboração de um novo método de determinação da absorção em garrafa, que permitisse a sua determinação sem o conhecimento da massa inicial da rolha. Para a concretização do primeiro objectivo foram estudados doze produtos químicos em comparação com o actualmente utilizado, em que o objectivo foi obter-se forças de extracção entre 15 e 20 daN. Após realização do tratamento de superfície para cada produto foram realizados vários testes laboratoriais, nomeadamente: forças de extracção, vedação em tubo, absorção em garrafa, capilaridade, análise de risco à quantidade de produto adicionado e análise de risco ao tempo de distribuição do tratamento. Após análise global dos resultados obtidos verificou-se que o produto T13, embora apresente forças de extracção no limite inferior ao desejado possui uma boa estabilização. Os produtos T5 e T6 são bons alternativos ao produto actualmente implementado (T8), embora seja necessário ter alguns cuidados no seu manuseamento. O produto T5 como foi considerado mau no teste da absorção em garrafa não poderá ser utilizado para mercados mais distantes (EUA, Austrália e África do Sul) devido ao risco de ocorrência de migração de vinho através da rolha de cortiça. O produto T6 como apresentou um comportamento irregular na análise de risco à quantidade de produto adicionado, e na análise de risco à distribuição de produto, deve-se ter muita atenção à quantidade inserida no tambor assim como o tempo de distribuição. Para a concretização do segundo objectivo foi determinada a absorção em garrafa pelo método actual e comparou-se com o novo método. Apesar do desvio padrão ser de aproximadamente 0,85, pode-se afirmar que o novo método de determinação da absorção em garrafa é um método eficaz que pode ser aprovado pela empresa. Desta forma, foi possível solucionar esta questão e permitir ao laboratório de controlo de qualidade determinar a absorção em garrafa de garrafas de vinho provenientes de clientes.

Effects of gamma and electron beam irradiation in the antioxidante potential of methanolic extracts and infusions of Arenaria Montana L

Irradiation is a methodology qualified for dry ingredients preservation or decontamination and can be performed using various radiation sources and energy levels in accordance with the objectives to be achieved [1]. Electron beam irradiation is used mainly for food products with low density, while gamma irradiation is mainly used for large volumes [2]. Arenaria Montana L. has a high antioxidant potential and richness in bioactive phytochemicals. It is used in Portuguese traditional medicine, acting therapeutically as an anti-inflammatory and diuretic plant [3]. The aim of this work was to evaluate the effects of gamma and electron beam irradiation at different doses (I and 10 kGy) in the antioxidant activity of A. montana. Free radicals scavenging activity, reducing power and lipid peroxidation inhibition properties of its methanolic extracts and infusions were evaluated. Through a global analysis, it was concluded that the antioxidant activity proved to be higher in methanolic extracts in comparison with the infusions, where it decreased with increasing irradiation dose regardless of the technology used (gamma or electron beam). For methanolic extracts, electron beam resulted in increased antioxidant activity while gamma irradiation caused a decrease in these extracts. Thus, the antioxidant potential is variable depending not only on the type of radiation and the dose applied, but also on the solvent used in the preparation of the extracts (methanol or water).

Etude écologique de projet. Site de Flamanville. 1er cycle. Traitements mathématiques, Rapport général, Annexes

The study of a first annual hydrobiological cycle on the site of Flamanville was carried out through 19 campaigns conducted between July 76 and June 77. Twelve of them are considered as "heavy" and took place on the following dates: July 8th, 76; August 6th, September 4th, October 3rd, November 3rd, December 16th, January 5th, 77; February 2nd, March 3rd, April 14th, May 10th and May 24th. Seven campaigns consist only in one sample July 23rd, 76; August 21st, September 16th, November 19th, January 19th, 77; February 17th and June 16th. However, some variables which had not been measured during these "light" missions have not been taken into account for the analysis. A first global analysis groups together the first ten campaigns (in May, the nutritive salts had not been measured) and presents the annual variations of nine parameters: temperature, salinity, oxygen, nitrates (N0 3), nitrites (N0 2), phosphates (P0 4), silicates (Si0 2), chlorophyll and pheopigments. A second study of the annual hydrobiological cycle includes all campaigns but only five variables: temperature, salinity, oxygen, chlorophyll and pheopigments.

Análise de Sustentabilidade em Projetos de Instalações de Produção de Petróleo

A proposal for a global analysis of sustainability in projects related in oil facilities is presented. By considering economic, environmental and social aspects in the early stages of design, the suggested method is more comprehensive and can be used to complement the analysis commonly applied in the petroleum industry, such as: Study of Technical and Economic Feasibility; Environmental Impact Assessment and Risk Analysis. Several authors, associations, certification bodies and oil companies suggest different approaches to study sustainability in some specific activities (or industries). In this study, a checklist of significant sustainability aspects for the oil industry (surface facilities) was assembled. In addition, a matrix was developed to assess the sustainability items relevant to these projects. In this work, the checklist interacts with the matrix to perform a "Preliminary Analysis of Sustainability of the Enterprise" (APSE). This method allows the identification of aspects that contribute significantly to global sustainability. From this analysis, which includes economic, social and environmental aspects, is built a report that is used to analyze qualitatively and quantitatively the impact of the sustainability aspects of the project. In this analysis are identified items that strongly influence the economic, social or environmental aspects and evaluated alternatives that can increase the overall sustainability of the project. Finally, the alternatives that can be used to indicate the most sustainable option are identified. This method was applied in a project (design) of a small offshore platform. This case study shows how the APSE can contribute to the identification of sustainability initiatives for the enterprise. The results showed that relevant aspects can contribute decisively to global sustainability. Finally, it was observed that the proposed method can contribute to increased rates of sustainability, even after application of analysis commonly used in these projects

A perspectiva do cliente no processo de mudança em psicoterapia existencial

Dissertação de Mestrado apresentada no ISPA – Instituto Universitário para obtenção do grau de Mestre em Psicologia especialidade de Psicologia Clínica.

Optimal control of non-linear systems through hybrid cell-mapping/artificial-neural-networks techniques

In this paper, a real-time optimal control technique for non-linear plants is proposed. The control system makes use of the cell-mapping (CM) techniques, widely used for the global analysis of highly non-linear systems. The CM framework is employed for designing approximate optimal controllers via a control variable discretization. Furthermore, CM-based designs can be improved by the use of supervised feedforward artificial neural networks (ANNs), which have proved to be universal and efficient tools for function approximation, providing also very fast responses. The quantitative nature of the approximate CM solutions fits very well with ANNs characteristics. Here, we propose several control architectures which combine, in a different manner, supervised neural networks and CM control algorithms. On the one hand, different CM control laws computed for various target objectives can be employed for training a neural network, explicitly including the target information in the input vectors. This way, tracking problems, in addition to regulation ones, can be addressed in a fast and unified manner, obtaining smooth, averaged and global feedback control laws. On the other hand, adjoining CM and ANNs are also combined into a hybrid architecture to address problems where accuracy and real-time response are critical. Finally, some optimal control problems are solved with the proposed CM, neural and hybrid techniques, illustrating their good performance.

Método LNEC para avaliação e classificação da qualidade acústica de edifícios habitacionais: ferramenta de estimação de custos médios de transição entre classes acústicas

O conforto acústico na habitação é essencial para permitir um repouso tranquilo e regenerativo. Este conforto é obtido principalmente pela redução do ruído e aumento do isolamento sonoro dos elementos de compartimentação. Para a qualificação deste conforto é necessário efetuar uma análise global do edifício, onde são considerados os fatores internos e externos à habitação, ou seja, considerando a acústica da envolvente (Vizinhança), do edifício (Edifício) e da fração (Habitação). Para este efeito foi produzido o “Método LNEC para avaliação e classificação da qualidade acústica de edifícios habitacionais”, o qual permite fazer uma avaliação global do conforto acústico na habitação. Este método inovador em Portugal origina uma Classe Acústica LNEC que permite representar com razoável fiabilidade o conforto acústico realmente sentido e a qualidade acústica da habitação. Este método pode ser aplicado a edifícios novos e a edifícios a reabilitar. De modo a permitir uma estimação dos custos médios necessários para transitar entre determinadas classes (e alcançar respetivo conforto acústico) é necessário possuir uma ferramenta de cálculo apropriada. Deste modo apresenta-se nesta comunicação uma ferramenta para estimar os custos de transição entre classes acústicas. Esta metodologia permite fazer escolhas mais fundamentadas nos processos de obtenção de determinado conforto acústico. Abstract The acoustic comfort in dwellings is essential to a peaceful and regenerative sleep. The achievement of this comfort is primarily obtained by reducing noise and increasing sound insulation of separating elements. To classify this comfort is necessary to conduct a comprehensive analysis of the habitation. This global analysis assesses the internal and external factors of the habitation, evaluating the acoustics of the environment (Vicinity), of the building (Building) and of the dwelling place (Lodging). Recently in Portugal was developed the “LNEC method for evaluation and acoustic quality classification of residential buildings” that allows an overall evaluation of the acoustic comfort in dwellings, resulting also in a “LNEC Acoustic Class” that portrays the real acoustic comfort sensed. Since this method can be applied to evaluate the acoustic comfort of new and of restored buildings, it is necessary a tool that gives an estimation of the needed investment to upgrade to a specific “LNEC Acoustic Class” (and achieve the respective acoustic comfort). In this communication is presented a tool that allows the estimation of that upgrade costs.