Erratum to: Thermal–mechanical behaviour of chitosan–cellulose derivative thermoreversible hydrogel films

CH, Chitosan; HPMC, (Hydroxypropyl)methyl cellulose; FT, Freeze-thaw; SC, Solvent casting; CH:HPMC (X:Y), pH Z, FT/SC, Chitosan and (hydroxypropyl)methyl cellulose hydrogel, at X and Y proportion (0-100), at Z pH (3.0-4.0) and prepared by freeze-thaw or solvent casting techniques; DSC, Differential scanning calorimetry; MDSC, Temperature modulated Differential scanning calorimetry; Tg, glass transition temperature; ΔH, enthalpy change; TGA, Thermogravimetric Analysis; TG, Thermogravimetry; DTG, Derivative or Differential thermogravimetry; σ, Tensile strength; ε, elongation at break; DMA, Dynamic mechanical analysis; X-Ray, X-radiation, FTIR-ATR, Attenuated total reflectance Fourier transform infrared spectroscopy; SEM, Scanning electron microscopy.

Influence of oxygen plasma treatment parameters on poly(vinylidene fluoride) electrospun fiber mats wettability

Electrospun poly(vinylidene fluoride) (PVDF) fiber mats find applications in an increasing number of areas, such as battery separators, filtration and detection membranes, due to their excellent properties. However, there are limitations due to the hydrophobic nature and low surface energy of PVDF. In this work, oxygen plasma treatment has been applied in order to modify the surface wettability of PVDF fiber mats and superhydrophilic PVDF electrospun membranes have been obtained. Further, plasma treatment does not significantly influences fiber average size (~400 ± 200 nm), morphology, electroactive -phase content (~80-85%) or the degree of crystallinity (Xc of 42 ± 2%), allowing to maintain the excellent physical-chemical characteristics of PVDF. Plasma treatment mainly induces surface chemistry modifications, such as the introduction of oxygen and release of fluorine atoms that significantly changes polymer membrane wettability by a reduction of the contact angle of the polymer fibers and an overall decrease of the surface tension of the membranes.

Mechanical fatigue performance of PCL-chondroprogenitor constructs after cell culture under bioreactor mechanical stimulus

In tissue engineering of cartilage, polymeric scaffolds are implanted in the damaged tissue and subjected to repeated compression loading cycles. The possibility of failure due to mechanical fatigue has not been properly addressed in these scaffolds. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. This is related to inherent discontinuities in the material due to the micropore structure of the macro-pore walls that act as stress concentration points. In this work, chondrogenic precursor cells have been seeded in Poly-ε-caprolactone (PCL) scaffolds with fibrin and some were submitted to free swelling culture and others to cyclic loading in a bioreactor. After cell culture, all the samples were analyzed for fatigue behavior under repeated loading-unloading cycles. Moreover, some components of the extracellular matrix (ECM) were identified. No differences were observed between samples undergoing free swelling or bioreactor loading conditions, neither respect to matrix components nor to mechanical performance to fatigue. The ECM did not achieve the desired preponderance of collagen type II over collagen type I which is considered the main characteristic of hyaline cartilage ECM. However, prediction in PCL with ECM constructs was possible up to 600 cycles, an enhanced performance when compared to previous works. PCL after cell culture presents an improved fatigue resistance, despite the fact that the measured elastic modulus at the first cycle was similar to PCL with poly(vinyl alcohol) samples. This finding suggests that fatigue analysis in tissue engineering constructs can provide additional information missed with traditional mechanical measurements.

Hydrophobic/hydrophilic P(VDF-TrFE)/PHEA polymer blend membranes

Polymer blend membranes have been obtained consisting of a hydrophilic and a hydrophobic polymers distributed in co-continuous phases. In order to obtain stable membranes in aqueous environments, the hydrophilic phase is formed by a poly(hydrohyethyl acrylate), PHEA, network while the hydrophobic phase is formed by poly(vinylidene fluoride-co-trifluoroethylene) P(VDF-TrFE). To obtain the composites, in a first stage, P(VDF-TrFE) is blended with poly(ethylene oxyde) (PEO), the latter used as sacrificial porogen. P(VDF-TrFE)/PEO blend membranes were prepared by solvent casting at 70° followed by cooling to room temperature. Then PEO is removed from the membrane by immersion in water obtaining a P(VDF-TrFE) porous membrane. After removing of the PEO polymer, a P(VDF-TrFE) membrane results in which pores are collapsed. Nevertheless the pores reopen when a mixture of hydroxethyl acrylate (HEA) monomer, ethyleneglycol dimethacrylate (as crosslinker) and ethanol (as diluent) is absorbed in the membrane and subsequent polymerization yields hybrid hydrophilic/hydrophobic membranes with controlled porosity. The membranes are thus suitable for lithium-ion battery separator membranes and/or biostable supports for cell culture in biomedical applications.

Erratum: Influence of oxygen plasma treatment parameters on poly(vinylidene fluoride) electrospun fiber mats wettability

Electrospun poly(vinylidene fluoride) (PVDF) fiber mats find applications in an increasing number of areas, such as battery separators, filtration and detection membranes, due to their excellent properties. However, there are limitations due to the hydrophobic nature and low surface energy of PVDF. In this work, oxygen plasma treatment has been applied in order to modify the surface wettability of PVDF fiber mats and superhydrophilic PVDF electrospun membranes have been obtained. Further, plasma treatment does not significantly influences fiber average size (~400 ± 200 nm), morphology, electroactive -phase content (~80-85%) or the degree of crystallinity (Xc of 42 ± 2%), allowing to maintain the excellent physical-chemical characteristics of PVDF. Plasma treatment mainly induces surface chemistry modifications, such as the introduction of oxygen and release of fluorine atoms that significantly changes polymer membrane wettability by a reduction of the contact angle of the polymer fibers and an overall decrease of the surface tension of the membranes.

Biomaterials for cartilage tissue engineering under mechanical stimulus

Tese de Doutoramento em Ciências (Especialidade de Física)

Immunologic evaluation in infective endocarditis

OBJECTIVE: To analyze the immune response in peripheral blood of patients with infective endocarditis. METHODS: We studied 10 patients with infective endocarditis, age range from 20 to 50 years-old, males and females, and 20 healthy subjects in the same age range. The diagnosis of the disease was based on the clinical picture, echocardiogram, and hemoculture based upon samples drawn and tested before the treatment started. The were no history of atopy or malnutrition, no autoimmune disease, and they were not using any immunosuppressant or antibiotic medication. RESULTS: The patients with endocarditis had significantly higher T and B lymphocyte, CD4+ and CD8+ cell counts, IgM and IgG serum levels, and C4 component of the complement than the control group; no significant difference concerning serum IgA and neutrophil oxidative metabolism; a significant decrease in C3, chemotaxis, and monocyte phagocytosis;cryoglobulins were detected in 66.6% of patients and they were formed by IgG, IgM, IgA, C3, and C4. CONCLUSION: The patients with infective endocarditis were immunocompetent in most sectors of immune response and, at a certain moment, an autoimmune component may be present.

Síntese e testes in vitro de novas pirimido[5,4-d] pirimidinas em células resistentes do cancro coloretal

Dissertação de mestrado em Química Medicinal

Aplicação do método analítico a plagioclásios em 4 posições de extinção

O método analítico de Chomard é aplicado a 13 plagioclásios, pertencentes a 7 grupamentos. Para cada indivíduo, efetuaram-se, em cada uma das 4 posições de extinção, 12 operações (φ, θ, ψ) resultantes da combinação de 3θ (θ = 15º, θ = 30º e θ = 45º), com 4φ (φ = 45º, φ = 135º, φ = 225º e φ = 315º). Cada ângulo de extinção (ψ) foi determinado como média de 8 medições de maneira que realizaram-se cerca de 5000 medições individuais de ângulos ψ. Um resumo operacional do método é apresentado. Através de programa para computador, o valor de 2V e os ângulos diretores dos eixos óticos foram determinados de 12 maneiras diferentes em cada indivíduo, usando-se as operações equivalentes à combinação de cada θ com as C³4 possíveis de φ. Para cada θ , calculou-se o D resultante. A conclusão principal que o exame dos resultados permite é que confirmam-se resultados anteriores do autor: o método analítico é, para plagioclásios, pelo menos tão seguro quanto os convencionais, quando se usa θ =30º e φ é um múltiplo de 45º. Entretanto, não se observou nenhuma vantagem no emprego de 4 posições de extinção ao invés de apenas uma, escolhida ao acaso.

Ação de venenos de serpentes brasileiras sôbre a alexina ou complemento

O autor estudou a ação inativante, sôbre o complemento de cobaia, alguns venenos de serpentes brasileiras pertencentes às famílias dos Elapideos e Crotalideos. Da primeira, foi utilizado veneno de Micrurus frontalis, da segunda, foram usados venenos de espécies pertencentes aos gêneros Crotalus (C. terrificus) e Bothrops (B. atrox, B. neuwiedii, B. jararaca, B. ja-raracussú, B. cotiara e B. alternata). O venenos de M. frontalis e C. terri¬ficus se revelaram incapazes de inativar o complemento, ao passo que os diversos de Bothrops empregados se mostraram altamente inativantes, destruindo sempre o 4.° componente do complemento (C4), fração idêntica à afetada pela ação da amônea.

Ação inativante de corantes sobre a alexina ou complemento

Os autores estudaram a ação inativante de corantes sôbre a alexina. Para isto, empregaram 50 corantes das diferentes séries químicas, chegando à conclusão que sòmente 11 dêles possuem esta ação: o ponceau, vermelho congo, violeta de metila, auramina, eosina, rosa bengala, verde verdadeiro, violeta paris, azul de metila, pironina amarela e a anilina zul. Verificaram que êles inativam sempre em proporção constante: 0,5 ml- de uma solução a 1% e que esta ação parece ser independente das constantes físicas do corante (carga elétrica, pêso molecular, absorção máxima no espectrômetro) e das peculiaridades intrinsicas de suas constituições químicas. Determinaram também que êstes corantes inativaram em sua maioria o quarto componente termoestável (C4) da alexina, exceção feita do vermelho congo e da violeta de metila que inativavam o terceiro componente termoestável (C3). A pi-ronina amarela revelou atuar sôbre os 3.° e 4.° compenentes (C3 e C4) ou sobre algum elemento indispensável a ação dêles.

Uso de cubierta de invernadero de alta transmisión de luz en el cultivo de geranio

El aumento de la luminosidad tiene un efecto positivo sobre la cantidad y calidad de la mayoría de cultivos en invernadero, no solamente en latitudes claramente deficitarias de luz (Cockshull, 1989) sino también en zonas como el Sureste español (Castilla, 1994). Un aumento de luz aumenta la tasa de fotosíntesis y por tanto la producción de azúcares y ácidos, componentes determinantes del gusto de los frutos; asimismo el aspecto de los frutos también se verá mejorado con el aumento de la luz (Bakker et al., 1995). En la transmisión de luz del invernadero influye la forma y pendiente del techo, la orientación y las propiedades ópticas del material de cubierta. Los modelos físico- matemáticos abordan el cálculo de la transmisión de luz del invernadero considerando todos estos factores en su conjunto, además del efecto sombra que un módulo puede tener en la transmisión de luz de las otras naves del invernadero (Bot, 1983; Critten, 1983). Los modelos constituyen una excelente herramienta de diseño de nuevas estructuras y pueden servir para comparar la transmisión luminosa de invernaderos asimétricos de distintas pendientes y orientaciones (Castilla et al., 2000) Una característica fundamental que debe tener cualquier material de cubierta es la de ser altamente transmisor de la radiación solar. Por este motivo es interesante conocer las características ópticas de los nuevos filmes plásticos y de las mallas anti insectos, que cada vez cubren una mayor superficie del invernadero (Montero et al., 2000). Un material de alta transmisión de luz es el filme de copolímero Tetrafluor-Etileno (Asahi Glass Company, Japón, nombre comercial Aflex), que cuenta además con la propiedad de ser muy resistente a las condiciones ambientales; En Japón hay invernaderos con esta cubierta desde hace mas de 20 años sin mostrar pérdida apreciable de luminosidad. Debido al interés potencial de este plástico para los invernaderos del mediterráneo se procedió a evaluar su comportamiento en condiciones de campo, con los objetivos de comprobar su adaptación a los invernaderos arqueados, su efecto en el clima del invernadero y la respuesta de los cultivos al aumento de luminosidad.

Salmonella typhi: lisotipia VI e biotipificação em amostras oriundas de algumas regiões do Brasil

Fez-se uma análise da distribuicão da frequência dos lisotipos VI e dos tipos fermentativos segundo o esquema de Kristensen, em 1.150 amostras de Salmonella typhi, isoladas de diferentes regiões do Brasil (Pará, Pernambuco, Bahia, Minas Gerais, Rio de Janeiro, São Paulo e Rio Grande do Sul). No computo geral, observou-se a prevalência dos lisotipos A (38,1%); Ela (18,9%); amostras VI negativas (16,6%); D6 (8,7%) I + IV (4,6%); T (2,3%) e C1 (2,1%) e a ocorrência de alguns tipos fágicos característicos para determinadas áreas (B3, C4 e 40 na Bahia; E1b, F2, G1 e L1 em São Paulo; E4 e 28 no Rio de Janeiro). Quanto a classificacão bioquímica, 55,2% das amostras caracterizaram-se no biotipo II (xilose e arabinose negativas), 44,2% no tipo fermentativo I (xilose positiva e arabinose negativas) e 0,52% no tipo III (xilose e arabinose positivas), respectivamente.

Relació entre fotosíntesi i respiració en cultius sotmesos a estrés hídric mitjançant isòtops estables

Report for the scientific sojourn carried out at the Universite Paris Sud – XI, France, from July until october 2007. The relationship between photosynthesis and respiration were studied in crops using carbon and nitrogen stable isotopes under well watered and water-stressed conditions. The analyses of the 13C isotopic composition (δ13C) of total organic matter (TOM) recently fixed of well-watered plants revealed that it was mainly delivered to apical tissues and tap root. The fact that that the apical leaf and stems together with the inflorescences were d13C depleted, suggests that those tissues were newly formed and had a larger sink strength and metabolic activity. Secondly, the analyses of δ13C of respired CO2 immediately after the labelling (T=0) showed that a significant part of the C respired by leaves and nodules proceeded of the recently fixed CO2. In the following harvests (T=7 and T=14) such percentage tended to decrease, especially in apical leaves. Interestingly, the respiration d13C data also highlighted that even if at T=0 part of the respired proceeded from the CO2 fixed during the labelling, this percentage was even larger at T=7. Finally, the d15N also revealed that, similarly to what described for 12C, immediately after the 15N2 labelling (T=0), apical leaf and stems, together with tap root and in this case the nodules, were the tissues with larger sink strength. It is noteworthy the fact that the largest amount of N2 newly fixed was delivered to the tap roots where it was stored until it was required for the aboveground regrowth period.

Muntatge i caracterització d'una placa DSSC: Buscant potència

Treball de recerca realitzat per alumnes d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. Els objectius inicials foren la construcció d una 'Cèl•lula Solar Sensibilitzada mitjançant un Colorant’ (DSSC) amb el tint d una col llombarda i posterior caracterització segons el dossier 'Nanocrystalline Solar Cell Kit: Recreating Photosynthesis’. Les DSSC (Dye Sensitized Solar Cell) són un tipus de cèl•lules que imiten els principis que la fotosíntesis ha fet servir exitosament durant més de 3,5 bilions d anys. S’han construït algunes DSSC i se n’ha provat la seva eficiència. El seu funcionament es basa en l’energia d’un fotó que excita un electró i el fa saltar de nivell energètic fins que es desprèn de l’àtom de colorant, deixant un forat en la molècula. Aquest electró lliure passa a través de la capa de TiO2 fins arribar a la càrrega on es genera el corrent elèctric. Tot seguit, l’electró arriba al contra-elèctrode i és aquí on entra en contacte amb l’electròlit, el mediador iode/triiode. Aquest regenera l’electró, que anteriorment ha saltat del colorant, oxidant-se ell mateix.