Impregnación en CO2 supercrítico de diferentes sustratos poliméricos, como alternativa a los tratamientos textiles, comúnmente empleados en el Mediterráneo

En el siguiente trabajo se realiza la impregnación de diferentes sustratos poliméricos con agentes biocidas y con un colorante textil, comúnmente empleados en los procesos de acabados textiles. En este estudio se realiza la selección del colorante Disperse Red 167 (DR167), mediante la comparación de solubilidad en CO2 supercrítico (scCO2) entre varios colorantes dispersos. Los agentes biocidas seleccionados han sido; esencia de clavo (eugenol) y aceite esencial de orégano. Se ha realizado la impregnación de diferentes sustratos poliméricos; poliéster (PES), polipropileno (PP), y algodón (CO), en diferentes condiciones. En total se realizaron impregnaciones utilizando diez concentraciones relativas del DR167. El objetivo principal es determinar las condiciones óptimas de procesado para cada sustrato. Para determinar el rendimiento de la tintura en scCO2 se han representado los diagramas cromáticos de las muestras tintadas en diferentes condiciones. Las muestras de PES son las que presentan mayor rendimiento de color, sabiendo que esta es la única fibra que presenta afinidad con el DR167. Para determinar el efecto de inhibición de las bacterias se han realizado ensayos de actividad antimicrobiana y actividad fungicida. Puede indicarse que sí se observó cierta actividad inhibitoria frente algunos microorganismos, como Staphylococcus aureus, mientras que no se observó una actividad inhibitoria importante frente a otros como Pseudomonas aeruginosa.

Sequential pyrolysis of willow SRC at low and high heating rates:implications for selective pyrolysis

The main aim of the work is to investigate sequential pyrolysis of willow SRC using two different heating rates (25 and 1500 °C/min) between 320 and 520 °C. Thermogravimetric analysis (TGA) and pyrolysis - gas chromatography - mass spectroscopy (Py-GC-MS) have been used for this analysis. In addition, laboratory scale processing has been undertaken to compare product distribution from fast and slow pyrolysis at 500 °C. Fast pyrolysis was carried out using a 1 kg/h continuous bubbling fluidized bed reactor, and slow pyrolysis using a 100 g batch reactor. Findings from this study show that heating rate and pyrolysis temperatures have a significant influence on the chemical content of decomposition products. From the analytical sequential pyrolysis, an inverse relationship was seen between the total yield of furfural (at high heating rates) and 2-furanmethanol (at low heating rates). The total yield of 1,2-dihydroxybenzene (catechol) was found to be significant higher at low heating rates. The intermediates of catechol, 2-methoxy-4-(2-propenyl)phenol (eugenol); 2-methoxyphenol (guaiacol); 4-Hydroxy-3,5-dimethoxybenzaldehyde (syringaldehyde) and 4-hydroxy-3-methoxybenzaldehyde (vanillin), were found to be highest at high heating rates. It was also found that laboratory scale processing alters the pyrolysis bio-oil chemical composition, and the proportions of pyrolysis product yields. The GC-MS/FID analysis of fast and slow pyrolysis bio-oils reveals significant differences. © 2011 Elsevier Ltd. All rights reserved.

Functionalised polymers

Synthetic routes to polymers possessing functional groups were studied. Direct functionalisation of poly(vinyltoluene) by lithiation and carboxylation resulted in the expected carboxylic acid but reaction was complicated by the production of a mixture of products. Reaction occurred both at the polymer backbone and at the pendant methyl group. Reaction with ethyl formate was also difficult to control and a secondary alcohol was formed even when an excess of the carbonyl compounds was employed. Grignard formation of poly(bromostyrene) was successful but once formed, the derivative rearranged resulting in chain scission and degradation of the polymer. Therefore subsequent reactions of the Grignard reagent with carbonyl groups were unsuccessful in producing functionalised polymers. Reactions of vinyltoluene monomer were more successful. Although complications arose when lithiation and carboxylation of the monomer were carried out using lithium diisopropylamide because the carboxylic acid product reacted with the excess lithium diisopropylamide present, metallation by potassium t-butoxide followed by reaction with 2-(3-chloropropyl)-2-methyl-1,3-dioxalane resulted in the formation of 2-methyl-2(4-(vinylphenyl)-butyl-1,3,-dioxalane. The butyllithium initiated anionic polymerisation of this protected monomer resulted in a polymer which had a very narrow molecular weight distribution (Mw/Mn= 1.05) and subsequent hydrolysis of the polymer resulted in poly(6(vinylphenyl)-hexan-2-one) which was derivatised with 2,4 dinitrophenyl-hydrazine. Functionalisation by modification of the siloxane derivative 3-(methylpropenoxycarbonyl)ltrimethoxysilane was unsuccessful. The acid catalysed exchange reactions of this monomer with alcohols such as eugenol, octan-1-ol, pentan-1-ol, and hexan-1-ol were inefficient, resulting in a mixture of products and unreacted starting materials.

Chemical profile and antifungal potential of essential oils from leaves and flowers of Salvia algeriensis (Desf.): A comparative study

Salvia is a plant genus widely used in folk medicine in the Mediterranean area since antiquity. A large number of Salvia essential oils have been reported against diverse microorganisms. In the current study, chemical composition of essential oils from leaves and flowers of Salvia algeriensis (Desf.) was determined using gas chromatography-electron impact mass spectrometry (GC-EIMS) as well as their antifungal activity against phytopathogenic fungi Alternaria solani and Fusarium oxysporum exploring disk method. The GC-EIMS analysis identified 59 compounds (84.8%) in the essential oil obtained from leaves of S. algeriensis. Its major constituents were benzaldehyde (9.7%), eugenol (8.7%) and phenylethyl alcohol (8.4%). In flowers oil, 34 compounds (92.8%) were detected. The main ones were viridiflorol (71.1%) and globulol (8.6%). The essential oil obtained from leaves exhibited the highest antifungal activity, where the effective dose inhibiting 50% of mycelial fungal (ED50) against A. solani was 0.90 μL mL-1 with minimum inhibitory concentration (MIC) equal to 2 μL mL-1, whereas the ED50 and MIC in F. oxysporum culture was 1.84 μL mL-1 and 3 μL mL-1 respectively. The mycelial inhibition by flowers oil varies from 1.77 μL mL-1 (ED50) with A. solani culture (MIC 6.5 μL mL-1) to the lowest effect recorded (ED50 3.00 μL mL-1 and MIC 9.33 μL mL-1) against F. oxysporum. To our best knowledge, this is the first report on S. algeriensis, their leaves oil can constitute an alternative biocontrol against phytopathogenic fungi commonly controlled by chemical fungicides.

Evaluación fitoquímica y microbiológica de extractos naturales y su incorporación en nanopartículas poliméricas para su aplicación odontológica

La caries dental es la principal enfermedad oral que padece la población a nivel mundial. Su prevención se basa en educación sobre higiene oral, además del uso complementario de agentes antimicrobianos. Entre las alternativas de prevención una área prometedora incluye el empleo de extractos de plantas como agentes antimicrobianos incorporados en nanopartículas poliméricas (NP), las cuales, puedan funcionar como vehículos de liberación de extractos, mejorando el desempeño de estos agentes activos naturales. El objetivo de este trabajo fue obtener extractos de plantas de Ocimum basilicum (Albahaca) Calendula officinalis (Cálendula) y aceites esenciales de Syzigium aromaticum (Clavo) y Thymus vulgaris (Tomillo). Se realizó su caracterización fitoquímica y se evaluó su actividad antimicrobiana mediante dilución en tubo contra células plantónicas de Streptococcus gordonii, Streptococcus mutans y Candida albicans (ATCC), determinando la concentración mínima inhibitoria (CMI). El extracto con mayor actividad fue incorporado en NP mediante el método de nanoprecipitación (NP) y las nanopartículas se caracterizaron en base a su tamaño e índice de polidispersidad por espectroscopia de relación fotónica; el porcentaje y la eficiencia de encapsulación y mecanismo de liberación del eugenol contenido en el aceite encapsulado, se realizó mediante cromatografía de gases acoplado a espectrometría de masas (GSMC). En la presente investigación, se determinó que el aceite esencial de clavo mostró la mayor actividad antimicrobiana con respecto a los demás extractos evaluados. Por medio de GSMC se identificó al eugenol como el componente principal del aceite esencial obtenido por hidrodestilación. Se obtuvieron NP esféricas con tamaño alrededor de 157 nm, el porcentaje y la eficiencia de encapsulación de eugenol presente en el aceite encapsulado fue de 73.16 % y 47 % respectivamente; además de mostrar una liberación in vitro de eugenol del 50 % a las 24 horas. Finalmente, la CMI del aceite de clavo sin encapsular e incorporado en NP, correspondió a 125 y 75 μg/mL respectivamente. En base a los resultados obtenidos, es factible incorporar extractos vegetales en NP para su liberación sostenida, siendo una terapia antimicrobiana prometedora dentro del área odontológica.

Eficácia de películas edíveis suplementadas com componentes de óleos essenciais no controlo de Listeria monocytogenes e Salmonella enterica Typhimurium

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Avaliação da atividade fungicida de óleos essenciais e suas substâncias ativas no controlo de fungos de armazenamento

Mestrado em Engenharia Agronómica - Proteção da Plantas - Instituto Superior de Agronomia - UL