589 resultados para Endodontia - Espalhamento
Resumo:
The need to build durable structures and resistant to harsh environments enabled the development of high strength concrete, these activities generate a high cement consumption, which implies factor in CO2 emissions. Often the desired strength is not achieved using only the cement composition. This study aims to evaluate the influence of pozzolans with the addition of metakaolin on the physical mechanics of high strength concrete comparing them with the standard formulation. Assays were performed to characterize the aggregates according to NBR 7211, evaluation of cement and coarse aggregate through the trials of petrography (NBR 15577-3/08) and alkali-aggregate reaction (NBR 15577-05/08). Specimens were fabricated according to NBR 5738-1/04 with additions of 0%, 4%, 6%, 8% and 10% of metakaolin for cement mortars CP V in the formulations. For evaluation of the concrete hardened in fresh state and scattering assays were performed and compressive strength in accordance with the NBR 7223/1992 and NBR 5739-8/94 respectively. The results of the characterization of aggregates showed good characteristics regarding size analysis and petrography, as well as potentially innocuous as the alkali-aggregate reaction. As to the test of resistance to compression, all the formulations with the addition of metakaolin showed higher value at 28 days of disruption compared with the standard formulation. These results present an alternative to reduce CO2 emissions, and improvements in the quality and durability of concrete, because the fine particle size of metakaolin provides an optimal compression of the mass directly influencing the strength and rheology of the dough
Resumo:
Os polímeros biodegradáveis, como o poliácido láctico (PLA) apesar de consolidado nos campos farmacêuticos, médico e biomédico como biomateriais úteis para aplicações variadas, porém, depende da necessidade de funcionalizar a sua superfície estudando suas propriedades tais como hidrofilidade e hidrofobicidade favorecendo a interação do polímero com os materiais de aplicação farmacêutica, médica e biomédica. Este trabalho tem como objetivo produzir um material com características diferentes em cada um de seus lados, sendo um lado hidrofílico e o outro hidrofóbico. O substrato têxtil utilizado neste estudo foi um tecido de malha de composição 100% PLA que é biodegradável e biocompatível, o que possibilita sua aplicação na área biomédica. Para modificação superficial foi utilizado o tratamento a plasma de baixa pressão. A técnica de modificação de superfície por plasma foi escolhida por ser uma tecnologia limpa, anticorrosiva e não tóxica ao contrario de muitos processos químicos convencionais utilizados na indústria têxtil, além disso, não afeta as propriedades de massa do substrato. Neste estudo, um lado da superfície do substrato foi tratado com plasma oxigênio, argônio e nitrogênio, para o trabalho de melhoria da hidrofilidade da superfície e metano para a hidrofobicidade da amostra. A espectroscopia de emissão ótica (OEE) foi utilizada para fazer o diagnóstico das espécies do plasma durante o tratamento. Após o tratamento a plasma as amostras foram caracterizadas por medidas de ângulo de contato, microscopia eletrônica de varredura (MEV), Espectroscopia de fotoelétrons de raios-X (XPS), Infravermelho com Transformada de Fourier (FTIR) de reflexão total atenuada (ATR), medidas da área de espalhamento do líquido e arraste vertical. Onde foi caracterizado o aumento e diminuição da molhabilidade das amostras tratadas por plasma bem como as variáveis que contribuíram para tal efeito. O tratamento das amostras de PLA com O2 + CH4 apresenta comportamento hidrofílico no lado tratado com O2, apresentando aumento de rugosidade e grupos funcionais e no lado tratado com CH4, apresentando a formação de um filme polimérico formado sobre a superfície da amostra. O tratamento com N2 + CH4 apresenta comportamento hidrofóbico, porém com variações no fluxo do CH4 tem-se um controle da molhabilidade na superfície das amostras, podendo ir de hidrofóbico a hidrofílico, neste tratamento as amostras apresentaram pequenas diferenças de molhabilidade entre os lados tratados com plasma de N2 e com plasma de CH4
Resumo:
In the petroleum industry, water is always present in the reservoir formation together with petroleum and natural gas and this fact provokes the production of water with petroleum, resulting in a great environmental impact. Several methods can be applied for treatment of oily waters, such as: gravitational vases, granulated media filtration systems, flotation process, centrifugation process and the use of hydrocyclones, which can also be used in a combined way. However, the flotation process has showed a great efficiency as compared with other methods, because these methods do not remove great part of the emulsified oil. In this work was investigated the use of surfactants derived from vegetable oils, OSS and OGS, as collectors, using the flotation process in a glass column with a porous plate filter in its base for the input of the gaseous steam. For this purpose, oil/water emulsions were prepared using mechanical stirring, with concentrations around 300 ppm. The air flow rate was set at 700 cm3/min and the porous plate filter used for the generation of the air bubbles has pore size varying from 16 to 40 Pm. The column operated at constant volume (1500mL). A new methodology has been developed to collect the samples, where, instead of collecting the water phase, it was collected the oil phase removed by the process in the top of the flotation column. It has been observed that it is necessary to find an optimum surfactant concentration to achieve enhanced removal efficiency. Being for OSS 1.275 mmol/L and for OGS 0.840 mmol/L, with removal efficiencies of 93% and 99%, respectively, using synthetic solutions. For the produced water, the removal in these concentrations was 75% for OSS and 65% for OGS. It is possible to remove oil from water in a flotation process using surfactants of high HLB, fact that is against the own definition of HLB (Hydrophile-Lipophile Balance). The interfacial tension is an important factor in the oil removal process using a flotation process, because it has direct interference in the coalescence of the oil drops. The spreading of the oil of the air bubble should be considered in the process, and for the optimum surfactant concentrations it reached a maximum value. The removal kinetics for the flotation process using surfactants in the optimum concentration has been adjusted according to a first order model, for synthetic water as for the produced water.
Resumo:
The growing utilization of surfactants in several different areas of industry has led to an increase on the studies involving solutions containing this type of molecules. Due to its amphiphilic nature, its molecule presents one polar part and one nonpolar end, which easily interacts with other molecules, being able to modify the media properties. When the concentration in which its monomers are saturated, the airliquid system interface is reached, causing a decrease in interfacial tension. The surfactants from pure fatty acids containing C8, C12 and C16 carbonic chains were synthesized in an alcoholic media using sodium hydroxide. They were characterized via thermal analysis (DTA and DTG) and via infrared spectroscopy, with the intention of observing their purity. Physical and chemical properties such as superficial tension, critical micelle concentration (c.m.c), surfactant excess on surface and Gibbs free energy of micellization were determined in order to understand the behaviour of these molecules with an aqueous media. Pseudo-ternary phase diagrams were obtained aiming to limit the Windsor equilibria conditions so it could be possible to understand how the surfactants carbonic chain size contributes to the microemulsion region. Solutions with known concentrations were prepared to study how the surfactants can influence the dynamic light scattering spectroscopy (DLS) and how the diffusion coefficient is influenced when the media concentration is altered. The results showed the variation on the chain size of the studied surfactant lipophilic part allows the conception of surfactants with similar interfacial properties, but dependent on the size of the lipophilic part of the surfactant. This variation causes the surfactant to have less tendency of microemulsionate oil in water. Another observed result is that the n-alcanes molecule size promoted a decrease on the microemulsion region on the obtained phase diagrams
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico
Resumo:
We studied the spin waves modes that can propagate in magnetic multilayers composed of ferromagnetic metallic films in the nanometer scale. The ferromagnetic films (iron) are separated and coupled through the nonmagnetic spacer films (chromium). The films that make up the multilayer are stacked in a quasiperiodic pattern, following the Fibonacci and double period sequences. We used a phenomenological theory taking into account: the Zeeman energy (between the ferromagnetic films and the external magnetic field), the energy of the magneto-crystalline anisotropy (present in the ferromagnetic films), the energy of the bilinear and biquadratic couplings (between the ferromagnetic films) and the energy of the dipole-dipole interaction (between the ferromagnetic films), to describe the system. The total magnetic energy of the system is numerically minimized and the equilibrium angles of the magnetization of each ferromagnetic film are determined. We solved the equation of motion of the multilayer to find the dispersion relation for the system and, as a consequence, the spin waves modes frequencies. Our theoretical results show that, in the case of trilayers (Fe/Cr/Fe), our model reproduces with excellent agreement experimental results of Brillouin light scattering, known from the literature, by adjusting the physical parameters of the nanofilms. Furthermore, we generalize the model to N ferromagnetic layers which allowed us to determine how complex these systems become when we increase the number of components. It is worth noting that our theoretical calculations generalize all the results known from the literature
Resumo:
The study physical process that control the stellar evolution is strength influenced by several stellar parameters, like as rotational velocity, convective envelope mass deepening, and magnetic field intensity. In this study we analyzed the interconnection of some stellar parameters, as Lithium abundance A(Li), chromospheric activity and magnetic field intensity as well as the variation of these parameters as a function of age, rotational velocity, and the convective envelope mass deepening for a selected sample of solar analogs and twins stars. In particular, we analyzed the convective envelope mass deepening and the dispersion of lithium abundance for these stars. We also studied the evolution of rotation in subgiants stars, because its belong to the following evolutionary stage of solar analogs, and twins stars. For this analyze, we compute evolutionary models with the TGEC code to derive the evolutionary stage, as well as the convective envelope mass deepening, and derive more precisely the stellar mass, and age for this 118 stars. Our Investigation shows a considerable dispersion of lithium abundance for the solar analogs stars. We also realize that this dispersion is not by the convective zone deep, in this way we observed which the scattering of A(Li) can not be explained by classical theories of mixing in the convective zone. In conclusion we have that are necessary extra-mixing process to explain this decrease of Lithium abundance in solar analogs and twins stars. We analyzed the subgiant stars because this are the subsequent evolutionary stage after the solar analogs and twins stars. For this analysis, we compute the rotational period for 30 subgiants stars observed by Co- RoT satellite. For this task we apply two different methods: Lomb-Scargle algorithm, and the Plavchan Periodogram. We apply the TGEC code we compute models with internal distribution of angular momentum to confront the predict results with the models, and the observational results. With this analyze, we showed which solid body rotation models are incompatible with the physical interpretation of observational results. As a result of our study we still concluded that the magnetic field, convective envelope mass deepening, and internal redistribution of angular momentum are essential to explain the evolution of low-mass stars, and its observational characteristics. Based on population synthesis simulation, we concluded that the solar neighborhood presents a considerable quantity of solar twins when compared with the discovered set nowadays. Altogether we foresee the existence around 400 solar analogs in the solar neighborhood (distance of 100 pc). We also study the angular momentum of solar analogs and twins, in this study we concluded that added angular momentum from a Jupiter type planet, putted in the Jupiter position, is not enough to explain the angular momentum predicted by Kraft law (Kraft 1970)
Resumo:
In this work we study the spectrum (bulk and surface modes) of exciton-polaritons in infinite and semi-infinite binary superlattices (such as, ···ABABA···), where the semiconductor medium (A), whose dielectric function depends on the frequency and the wavevector, alternating with a standard dielectric medium B. Here the medium A will be modeled by a nitride III-V semiconductor whose main characteristic is a wide-direct energy gap Eg. In particular, we consider the numerical values of gallium nitride (GaN) with a crystal structure wurtzite type. The transfer-matrix formalism is used to find the exciton-polariton dispersion relation. The results are obtained for both s (TE mode: transverse electric) and p (TM mode: transverse magnetic) polarizations, using three diferent kind of additional boundary conditions (ABC1, 2 e 3) besides the standard Maxwell's boundary conditions. Moreover, we investigate the behavior of the exciton-polariton modes for diferent ratios of the thickness of the two alternating materials forming the superlattice. The spectrums shows a confinement of the exciton-polariton modes due to the geometry of the superlattice. The method of Attenuated Total Reflection (ATR) and Raman scattering are the most adequate for probing this excitations
Resumo:
Family Health Strategy (FHS), founded in 1994 has appeared to play a strategic role in the SUS construction and consolidation. It has reaffirmed its Principles and Guidelines and has elected family as core of attention. The principle that has guided the work concerns the quality of the relationship between professional and family. Thus, the FHS has the family as a subject of health-disease process, and relations with its own characteristics and can be partners in building their health and improvement of quality of life of its members and the entire community. This study aims to characterize the surgeon-dentist (SD) working process in the family health strategy, from the knowledge of the SD integration with other team members; organization of services; development of shares, changes perceived by SDs, as well as knowing the surgeon-dentist profile who is part of this strategy. The collecting tool used was a semi-structured questionnaire, in which participated 30 professionals. As for profile, most professionals were women, completed the graduation in public university and did not have any training to work by joining the FHS. Almost all have other public or private working ties. They often carry out activities with students, and occasionally do home visits. In relation to team work, in activities such as home visits, school health, community activities, among others, they sometimes seek the cooperation of other members. The way of accessing for users in the most part has occurred through the schedule. The most frequently activities made to the Centro Especialidades Odontológicas (CEO), are in Endodontics and Prosthesis. The majority of them participate in team meetings, but they do not have frequency set to happen. As for the planning and programming of activities to be conducted, most said that individually develops them. Concerning the performance of their duties, most reported being satisfied, but that improvements could happen. Besides, they reported improvements in dental care following the inclusion of SD in the FHS in various aspects, such as access, organization, humanization, care and oral disease prevention. The professionals had poor integration with other team members, in addition to have a profile to more individualistic work, a fact seized by way of development and planning of actions. They work the actions in individual and curative way, in detriment promotion and collective ones. They work humanization, definition of territory and adscript population. Thus, it is concluded that the working process developed by SDs, includes the part which is advocated by FHS. This points out to a greater undertaking of this process aiming to detect the weakness met in order to reach the potential that the FHS represents in organization of basic attention
Resumo:
The Specialized Dental Care Centers (CEO) were developed to provide specialized dental care to the population, given the accumulated needs of health since the past. They must operate as units of reference for the Oral Health Team of the Primary Care, complementing the dental procedures performed at this level of attention. This study aims to assess the performance of CEOs of the Grande Natal Health Region as a strategy of Secondary Care consolidation in oral health through users, dentists and managers. For this to try to identify factors about access, hosting and satisfaction with the service, the actions developed in these centers, integration between the CEOs and the Basic Health Units (UBS), considering the reference and counter reference. Data were collected through semi-structured interview, conducted in four CEOs, among 253 users, 31 dentists and 4 managers. It was submitted to descriptive statistical analysis and to content analysis by software ALCESTE 4.5. The results revealed that the specialties of prosthesis, endodontics and surgery were the most sought by 38.2%, 23.7% and 21.7% of respondents, respectively. It was noticed that among users aged 18 to 30 years-old the greatest demand is for the specialty of endodontics (44.4%) and over 50 years for prosthesis (76.4%). There is a weakness in the reference and counter reference between UBS and CEO, because part of users goes directly to the centers without going before to the Primary Care and the majority does not want to return to the dentist of Health Unit. Satisfaction with care was reported by 90.9% of users, because they resolved the problems needed and were welcomed by the team. But the delay in care was the main factor for not satisfaction. For most dentists, some users could solve their problems completely in Primary Care, which shows the existence of unnecessary referrals to the CEOs, however they consider the existence of limiting factors in UBS that compromise the service. Most dentists revealed that some users do not get to CEOs with the basic dental treatment done, and some of them do not counter reference users. It can be concluded that the studied CEOs are being resolutive for those who access them, offering necessary care for the population, and if they don t account with this service, will encounter obstacles to resolution of problems, ranging seek care service in particular, in another public sector, or even giving up treatment. However, it is perceived the need of professionals training to understand the importance of the reference and counter reference, to that they can better serve and guide users. It is also important that cities offer better conditions to UBS and CEOs, so they can work together, with complementary actions of oral health, seeking full care, aiming for better resolution to the users' health problems
Resumo:
The Health Family Program (HFP) was founded in the 1990s with the objective of changing the health care model through a restructuring of primary care. Oral health was officially incorporated into HFP mainly through the efforts of dental professionals, and was seen as a way to break from oral health care models based on curative, technical biological and inequity methods. Despite the fast expansion of HFP oral health teams, it is essential to ask if changes are really occurring in the oral health model of municipalities. Therefore, the purpose of this study is to evaluate the incorporation of oral health teams into the Health Family Program by analyzing the factors that may interfere positively or negatively in the implementation of this strategy and consequently in the process of changing oral health care models in the National Health System in the state of Rio Grande do Norte, Brazil. This evaluation involves three dimensions: access, work organization and strategies of planning. For this purpose,19 municipalities, geographically distributed according to Regional Public Health Units (RPHU), were randomly selected. The data collection instruments used were: structured interview of supervisors and dentists, structured observation, documental research and data from national health data banks. It was possible to identify critical points that may be impeding the implementation of oral health into HFP, such as, low incomes, no legal employment contract, difficulty in referring patients for high-complexity procedures, in developing intersectoral actions and program strategies such as epidemiologic diagnosis and evaluation of the new actions. The majority of municipalities showed little or no improvement in oral health care after incorporating the new model into HFP. All of them had failures in most of the aspects mentioned above. Furthermore, these municipalities are similar in other areas, such as low educational levels in children from 7 to 14 years of age, high child mortality rates and wide social inequalities. On the other hand, the five municipalities that had improved oral health, according to the categories analyzed, offered better living conditions to the population, with higher life expectancy, low infant mortality rates, per capita income among the highest in the state as well as high Human Development Index (HDI) means. Therefore, it is possible to conclude that public policies that include aspects beyond the health sector are decisive for a real change in health care models
Resumo:
Objective: To evaluate the degree of users satisfaction and technical quality of endodontic treatment in specialized dental clinics (CEO) of Grande Natal / RN between 2006 and 2008. Methodology: evaluated 282 endodontically treated teeth in CEOs through clinical and radiographic examinations. A questionnaire about the clinical condition of the tooth, evaluation of care and satisfaction with treatment was applied. Data on pre-and trans-operative were noted by the patient's clinical record. Endodontically treated teeth were examined by a specialist in endodontics, which compared with previous radiographs and current ones. The collected datas were presented descriptively by absolute numbers, percentages, averages. To determine the association between the independent and dependent variables was carried out through the bivariate association test Chi-square and Fisher exact test. Results: 79.8% presented with radiographic normal and 84.4% without pain symptoms. 8.2% of the teeth were fractured and 3.2% extracted. The persistence of the periapical lesion was associated with initial periapical status (p <0.05). 91.5% of patients are satisfied with the outcome of treatment. Such satisfaction is associated with absence of pain and an adequate esthetic tooth position (p <0.05). Conclusion: endodontic treatment in specialized dental clinics have an adequate technical quality, resulting in the success of endodontic therapy performed in these centers and that users are satisfied with the treatment
Resumo:
The neurovascular system of the pulp and of the periodontium is interconnected and among the possible intercommunications between these two tissues, there is the cavo inter-radicular canal. It is a small canal that goes through any inter-radicular dentine and arises in the furca region of the multi-radicular teeth. Its predominance has been studied in the literature, by several methodologies, with divergent results. The objective of this work was to establish, in vitro, the predominance of the cavo inter-radicular canal, in human lower molars, through the diaphanization technique and dye leakage. For this research, 140 teeth (100 first and second 40 lower molars) were selected, extracted due to different reasons, belonging to a teeth bank of the Endodontics discipline of the Dentistry College at Federal University of Rio Grande do Norte. The teeth were preserved in formol until the moment of use and immersed in physiological solution. Had the endodontic access fulfilled and the whole external surface, except for the furcation, sealed with two layers of nail enamel. The cleaning of the pulpar chamber floor was carried out with sodium hypochlorite solution 5%, being this solution renewed every 5 minutes, during 1 hour. The teeth were immersed in Indian dye and, after drying of the dye, they had their crowns split up in the amelo-cemental junction. Then, they were examined in a stereomicroscope, where marks of the coloring were observed in the furcation and on the pulpar floor. After this recording, the sample was diaphanized and with the transparent teeth, it was possible to observe in the stereomicroscope, the true inter-radicular canals. As a result of this experiment, the presence of these canals was observed in 13 % of the first and 7, 5 % of the second evaluated molars. The study showed that both the presence of the cavo inter-radicular canal is real and the diaphanization and dye leakage is an efficient method for this type of research
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)