Characterization of thermal and mechanical properties of polypropylene-based composites for fuel cell bipolar plates and development of educational tools in hydrogen and fuel cell technologies

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi-walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbon's Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International's FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through-plane and in-plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in-plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through-plane and in-plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single-filler formulations. For thermal conductivity, Nielsen's model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen's model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

DEVELOPMENT OF A LOW COST IMPEDANCE TUBE TO MEASURE THE ACOUSTIC ABSORPTION AND TRANSMISSION LOSS OF MATERIALS

Traditional methods of measuring sound absorption coefficient and sound transmission loss of a material are time consuming. To overcome this limitation, normal incidence sound absorption and transmission loss measurement technique was developed. Unfortunately the equipment required for this task is equally expensive. Hence efforts are taken to develop a cost-effective equipment for measuring normal incidence sound absorption coefficient and transmission loss. An impedance tube capable of measure absorption coefficient and transmission loss is designed and built under a budget of $1500 for educational institutes. A background study is performed to gain knowledge and understanding of the normal incidence measurements technique. Based on the literature review, parameters involved such as tube material, source and microphone properties, sample holders, etc. are discussed in depth. Based on these parameters, design options are generated to meet the cost and functionality targets pre-assigned. After selection of materials and components, an impedance tube is built and tested using three fibrous absorption materials for absorption and a barrier for transmission loss performance. These measured results then compared with those obtained with the help of industry recognized Brüel & Kjær impedance tube. The results show performances are comparable, hence validation the new built tube.

Distributed Repositories for Educational Content

As education providers increasingly integrate digital learning media into their education processes, the need for the systematic management of learning materials and learning arrangements becomes clearer. Digital repositories, often called Learning Object Repositories (LOR), promise to provide an answer to this challenge. This article is composed of two parts. In this part, we derive technological and pedagogical requirements for LORs from a concretization of information quality criteria for e-learning technology. We review the evolution of learning object repositories and discuss their core features in the context of pedagogical requirements, information quality demands, and e-learning technology standards. We conclude with an outlook in Part 2, which presents concrete technical solutions, in particular networked repository architectures.

Distributed Repositories for Educational Content

In Part 1 of this article we discussed the need for information quality and the systematic management of learning materials and learning arrangements. Digital repositories, often called Learning Object Repositories (LOR), were introduced as a promising answer to this challenge. We also derived technological and pedagogical requirements for LORs from a concretization of information quality criteria for e-learning technology. This second part presents technical solutions that particularly address the demands of open education movements, which aspire to a global reuse and sharing culture. From this viewpoint, we develop core requirements for scalable network architectures for educational content management. We then present edu-sharing, an advanced example of a network of homogeneous repositories for learning resources, and discuss related technology. We conclude with an outlook in terms of emerging developments towards open and networked system architectures in e-learning.

Perceptions of Usability and Usefulness in Digital Libraries

This paper provides an overview of a case study research that investigated the use of Digital Library (DL) resources in two undergraduate classes and explored faculty and students’ perceptions of educational digital libraries. This study found that students and faculty use academic DLs primarily for textual resources, but turn to the open Web for visual and multimedia resources. The study participants did not perceive academic libraries as a useful source of digital images and used search engines when searching for visual resources. The limited use of digital library resources for teaching and learning is associated with perceptions of usefulness and ease of use, especially if considered in a broader information landscape, in conjunction with other library information systems, and in the context of Web resources. The limited use of digital libraries is related to the following perceptions: 1) Library systems are not viewed as user-friendly, which in turn discourages potential users from trying DLs provided by academic libraries; 2) Academic libraries are perceived as places of primarily textual resources; perceptions of usefulness, especially in regard to relevance of content, coverage, and currency, seem to have a negative effect on user intention to use DLs, especially when searching for visual materials.

Augmented Reality for preschoolers: an experience around Natural Sciences educational contents

Early education is a key element for the future success of students in the education system. This work analyzes the feasibility of using augmented reality contents with preschool students (four and five years old) as a tool for improving their learning process. A quasi experimental design based on a nonequivalent groups posttest-only design was used. A didactic unit has been developed around the topic “animals” by the participant teachers. The control group followed all the didactic activities defined in the developed didactic materials, while the experimental group was provided in addition with some augmented reality contents. Results show improved learning outcomes in the experimental group with respect to the control group.

Effectiveness of a pilot information service for educational research materials.

Mode of access: Internet.

Educational projects for a digital logic laboratory /

Thesis (M. S.)--University of Illinois at Urbana-Champaign.

Occupational and educational information materials for guidance purposes /

Cover title.

NBU Digital Collection “Bulgarian Cultural Heritage Materials”

Our experience in maintaining digital collections is described, which urged us to go deep in the process and build centralized digitalization policy. It instigated developing new strategy, adopting new technological solutions and staff training. The emphasis falls is placed on our digital collection “Bulgarian Cultural Heritage Materials” as an example of a focused digitization at the New Bulgarian University (NBU) Library and our answer to modern trends in launching digital collections. Our future digitization plans are also discussed.

Students’ Digital Archive at the State University of Library Studies and Information Technologies, Sofia

The paper describes the creation and content of the digital archive of photographs, films and materials from fieldwork (interviews, surveys, and observations) of students from the Information Funds of the Cultural and Historical Heritage program at the State University of Library Studies and Information Technologies, Sofia, Bulgaria. The text discusses the educational opportunities of the archive, and the plans for publishing it as CD and for conversion into an electronic archive on the Internet.

College of Medicine Updated Materials

Documents to be reviewed pertaining to the establishment of the College of Medicine's M.D. program. Includes Executed Annual Operating Agreement with Jackson Public Health Trust; Course Forms for Clinical Medicine I and II; Updated ED-10; Academic Calendar for the first year; Tables for Teaching Format Hours and Evaluation Plan for YEar 1; Overview of Professional Development Strand; and Faculty Roster by Department and Educational Role.

Section V: Educational Resources

Document detailing educational resources for the College of Medicine. Part of the Medical Education Database for Preliminary Accreditation 2006-2007.

Section II: Educational Program for the M.D. Degree

Document detailing educational objectives for the College of Medicine. Part of the Medical Education Database for Provisional Accreditation 2006-2007.