Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis

The present work presents the results of experimental investigation of semi-solid rheocasting of A356 Al alloy using a cooling slope. The experiments have been carried out following Taguchi method of parameter design (orthogonal array of L-9 experiments). Four key process variables (slope angle, pouring temperature, wall temperature, and length of travel of the melt) at three different levels have been considered for the present experimentation. Regression analysis and analysis of variance (ANOVA) has also been performed to develop a mathematical model for degree of sphericity evolution of primary alpha-Al phase and to find the significance and percentage contribution of each process variable towards the final outcome of degree of sphericity, respectively. The best processing condition has been identified for optimum degree of sphericity (0.83) as A(3), B-3, C-2, D-1 i.e., slope angle of 60 degrees, pouring temperature of 650 degrees C, wall temperature 60 degrees C, and 500 mm length of travel of the melt, based on mean response and signal to noise ratio (SNR). ANOVA results shows that the length of travel has maximum impact on degree of sphericity evolution. The predicted sphericity obtained from the developed regression model and the values obtained experimentally are found to be in good agreement with each other. The sphericity values obtained from confirmation experiment, performed at 95% confidence level, ensures that the optimum result is correct and also the confirmation experiment values are within permissible limits. (c) 2014 Elsevier Ltd. All rights reserved.

A Numerical Model of Rapid Solidification Processing of Ni-Al Alloy in Planar Flow Casting

A numerical model has been developed for simulating the rapid solidification processing (RSP) of Ni-Al alloy in order to predict the resultant phase composition semi-quantitatively during RSP. The present model couples the initial nucleation temperature evaluating method based on the time dependent nucleation theory, and solidified volume fraction calculation model based on the kinetics model of dendrite growth in undercooled melt. This model has been applied to predict the cooling curve and the volume fraction of solidified phases of Ni-Al alloy in planar flow casting. The numerical results agree with the experimental results semi-quantitatively.

Electron Beam Surface Remelting of AISI D2 Cold-Worked Die Steel

Electron beam surface remelting has been carried out on AISI D2 cold-worked die steel. The microstructure and hardening behavior of the electron beam surface remelted AISI D2 cold-worked die steel have been studied by means of optical microscopy and Vickers hardness testing. It was found that AISI D2 steel can be successfully surface hardened by electron beam surface remelting. This surface hardening effect can be attributed to microstructural refinement following electron beam surface remelting. (C) 2002 Elsevier Science B.V. All rights reserved.

Rheological flow from a die and painting on a moving solid wall

Die swell is an important, phenomenon. in polymer processing, and is explained usually by rheological properties of the fluid. Because of the nonuniform of temperature distribution on the free surface of the liquid jet, the thermo capillary convection driven by surface tension gradient exists. The rheological fluid flowing out of a die and painting on a moving solid wall is studied by the numerical finite element method of a two-dimensional and unsteady model in the present paper, and both the rheological effect of a non-Newtonian fluid and the thermocapillary effect are considered. The results show that both,effects; will enlarge the cross-section of the fluid jet, and the rheological effect of non-Newtonian fluid dominates the process in general.

Non-die explosive forming of spherical pressure-vessels

This paper presents a newly developed method of manufacturing spherical pressure vessels based on the technology of non-die explosive forming. Compared with the traditional method, this technology does not need any dies and pressing equipment, so that the cost of the production process can be greatly reduced, especially for vessels of less than 100 m3 capacity.

Die lateinische Epigraphie Hispaniens als Quelle für die keltische Gesell-schaft und Religion

Presentado en el III Workshop F.E.R.C.A.N (Fontes Epigraphici Religionum Celticarum Aantiquarum)

"Verwundete Orte" in Hettches Nox und Pareis Die Schattenboxerin

[EN] Body and space play a determinant role in the formation of societies, according to the social analyst Richard Sennet. His thesis that the configuration of spaces in history, such as that of the cities, is closely linked to the perception of the own body offers a relevant theorethical approach for the analysis of Nox (1995) by Thomas Hettche and Die Schattenboxerin (1999) by Inka Parei. In both novels bodies are perceived conscientiously by the self as a wounded and exhausted “I”, but also as a rebellious and fighting “self”. Both novels offer a concept of the body as an inadequate and wounded space, which is actually a key procedure to successfully face the similarly unstable geographical, social and political context of Germany after the Fall of the Berlin Wall.

Case study: Developing screen casting as a tool for formative and summative feedback

Case study on Oldham College and Edge Hill University working in partnership on a project to use screencasts as a way of providing feedback to learners.

Falsche Fische – ein Bericht über die Schwierigkeiten der Identifizierung einer „Seezunge“

In the last years German food control laboratories have established proof of a significant number of cases of incorrectly labelled flatfish on the German market. A flatfish offered as sole (Solea vulgaris) in Southern Germany served as an example for mislabelled flatfish and for the difficulties food control laboratories may encounter and to identify products of unknown origin. Morphometric and meristic examination, as well as isoelectric focusing of sarcoplasmic proteins, PCR-based DNA-analysis failed to identify the fish. By using these methods, it only could be excluded that the fish belonged to the species of Solea vulgaris or another described flatfish species. DNA sequencing of an amplicon gave a sequence identical to a sequence in GenBank, which, however, turned out to be incorrectly assigned to Solea vulgaris. More research about characterization and identification of tropical flatfish is recommended, because of the growing importance of these fishes for the European market.

Simulierte Auswirkungen des mehrjährigen Bewirtschaftungsplans für die Dorschfischerei in der westlichen Ostsee und die Möglichkeit einer technischen Alternative

The cod stock in the Western Baltic Sea is assessed to be overfished regarding the definitions of the UN World Summit on Sustainable Development at Johannesburg in 2002. Thus, the European Fisheries Council enforced a multi-annual management plan in 2007. Our medium term simulations over the future 10 years assume similar stock productivity as compared with the past four decades and indicate that the goals of the management plan can be achieved through TAC and consistent effort regulations. Taking account of the uncertainty in the recruitment patterns, the target average fishing mortality of age groups 3 – 6 years of F = 0.6 per year as defined in the management plan is indicated to exceed sustainable levels consistent with high long term yields and low risk of depletion. The stipulated constraint of the annual TAC variations of ±15% will dominate future fisheries management and implies a high recovery potential of the stock through continued reductions in fishing mortality. The scientific assessment of sustainable levels of exploitation and consideration in the plan is strongly advised, taking account of uncertainties attributed to environmental and biological effects. We recommend our study to be complemented with economic impact assessments including effects on by-catch species, which have been disregarded in this study. It is further demonstrated, that the goals of the management plan can alternatively be achieved by mesh size adaptations. An alternative technical option of mesh size increases to realize the required reductions in fishing mortality provides avoidance of discards of undersized fish after a few years by means of improved selectivity, another important element of the Common Fisheries Policy. However, it is emphasized that technical regulations since 1990 failed to affect the by-catch and discards of juvenile cod. In any way, the meaningful implementation of the multiannual management plan through stringent control and enforcement appears critical.

Auswirkungen der Wassertemperatur auf die Missbildungshäufigkeit pelagischer Fischembryonen

Malformation rates in embryos of dab, whiting, cod, flounder and plaice have been monitored for several years (1984-2006) in the Southern North Sea. For embryos of all species investigated trends for the fluctuation of malformation rates over the time were registered in the areas showing intermediate prevalences at the beginning of the studies in 1984 and maxima in 1987. Thereafter for all species a decrease of malformation rates was found until 2006 excepting an increase in 1996. A significant negative correlation existed between surface water temperature and prevalences of malformed embryos of dab and other species.

Die Ostsee als Welterbe für die Lebensmittelversorgung

The Baltic Sea, the largest existing brackish water is a little smaller than the Baikal, which is a world heritage. The Baltic Sea is very young, less than 10 000 years, whereas the Baikal, which is of about the same volume, is the oldest lake with 25 million years. Not so long ago the Baltic was considered mainly as a recipient for effluents. Fisheries are administrated by the European Union in agreement with Russia. Fisheries in the Baltic could give, when optimally managed, some 900 000 ton fish a year, to less than 20 000 professional fisherfolk from nine nations. During the course of time they have developed different coastal cultures with different languages, not so well known outside their own countries. The proposal is made that the unique Baltic becomes a world heritage for food supply and for food production in a traditional way. This would lead towards a sustainable small scale fisheries and to maintaining food security. A cooperation between fisherfolk from different nations is essential. In order to raise the public interest in that important World heritage issue and additionally, how to better use fish resources from the Baltic sea, it is also suggested to arrange for a competition between coastal restaurants, offering food prepared from Baltic resources.