Simulation of Dust Loaded V-I Characteristics of a Commercial Thermal Power Plant Precipitator

A new approach based on finite difference method, is proposed for the simulation of electrical conditions in a dc energized wire-duct electrostatic precipitator with and without dust loading. Simulated voltage-curren characteristics with and without dust loading were compared with the measured characteristics for analyzing the performance of a precipitator. The simple finite difference method gives sufficiently accurate results with reduced mesh size. The results for dust free simulation were validated with published experimental data. Further measurements were conducted at a thermal power plant in India and the results compares well with the measured ones.

Sport scandal and sponsorship decisions: Team identification matters

We conducted an experiment to investigate the impact of sport scandal on consumer attitudes toward a range of sport stakeholders. We examined the effects of fans’ social identity (fan of scandalized team vs. fan of rival team), scandal severity (single perpetrator vs. multiple perpetrators) and the sponsor brand’s response to the scandal (sponsorship retention vs. termination) on consumers’ attitudes toward the implicated team, the scandal perpetrators, the sport, and sponsor brand. We find evidence of differential reactions to scandal reflecting social identity, such that fans support their own team despite increased scandal severity but negatively judge a rival team’s transgressions. Results suggest that where fans are concerned, sponsors may be better served to continue with a sponsorship following scandal than to terminate, even for some forms of severe scandal. However, termination may receive more positive evaluation from rival team fans; hence continuation of sponsorship needs to accompany a tempered approach.

Accountability for good faith in commercial dealing: The Carter v Boehm legacy 250 years on

In common law jurisdictions such as England, Australia, Canada and New Zealand good faith in contracting has long been recognised in specific areas of the law such as insurance law and franchising, and more recently the implied duties of good faith and mutual trust and convenience in employment contracts have generated a considerable volume of case law. Outside of these areas of law that may be characterised as being strongly‘relational’ in character,the courts in common law jurisdictions have been reluctant to embrace a more universal application of good faith in contracting and performance. However increasingly there are cases which support the proposition that there is a common law duty of good faith of general application to all commercial contracts. Most important in this context is the recent decision of the Supreme Court of Canada in Bhasin v Hrynew.1 However, this matter is by no means resolved in all common law jurisdictions. This article looks at the recent case law and literature and at various legislative incursions including statutes, codes of conduct and regulations impacting good faith in commercial dealings.

Two Scenarios for How Scholarly Publishers Could Change Their Business Model to Open Access

The Internet has made possible the cost-effective dissemination of scientific journals in the form of electronic versions, usually in parallel with the printed versions. At the same time the electronic medium also makes possible totally new open access (OA) distribution models, funded by author charges, sponsorship, advertising, voluntary work, etc., where the end product is free in full text to the readers. Although more than 2,000 new OA journals have been founded in the last 15 years, the uptake of open access has been rather slow, with currently around 5% of all peer-reviewed articles published in OA journals. The slow growth can to a large extent be explained by the fact that open access has predominantly emerged via newly founded journals and startup publishers. Established journals and publishers have not had strong enough incentives to change their business models, and the commercial risks in doing so have been high. In this paper we outline and discuss two different scenarios for how scholarly publishers could change their operating model to open access. The first is based on an instantaneous change and the second on a gradual change. We propose a way to manage the gradual change by bundling traditional “big deal” licenses and author charges for opening access to individual articles.

Two Scenarios for How Scholarly Publishers Could Change Their Business Model to Open Access

The Internet has made possible the cost-effective dissemination of scientific journals in the form of electronic versions, usually in parallel with the printed versions. At the same time the electronic medium also makes possible totally new open access (OA) distribution models, funded by author charges, sponsorship, advertising, voluntary work, etc., where the end product is free in full text to the readers. Although more than 2,000 new OA journals have been founded in the last 15 years, the uptake of open access has been rather slow, with currently around 5% of all peer-reviewed articles published in OA journals. The slow growth can to a large extent be explained by the fact that open access has predominantly emerged via newly founded journals and startup publishers. Established journals and publishers have not had strong enough incentives to change their business models, and the commercial risks in doing so have been high. In this paper we outline and discuss two different scenarios for how scholarly publishers could change their operating model to open access. The first is based on an instantaneous change and the second on a gradual change. We propose a way to manage the gradual change by bundling traditional “big deal” licenses and author charges for opening access to individual articles.

Acceleration of ortho ester Claisen rearrangement by a commercial microwave oven

Microwave irradiation, using a commercial microwave oven accelerates (in 10–15 min) the three-step ortho ester Claisen rearrangement of allyl and propynyl alcohols in dry DMF in open Erlenmeyer flasks.

The Commercial Structure of Pedestrian Streets and Shopping Districts - Three Cases from Finland

Kävelykadut ovat tunnustettu tapa elävöittää keskusta-alueiden kauppaa. Aluksi moni kauppias epäilee kävelykadun tuomia muutoksia, mutta kokemus osoittaa, että kävelykadut ovat olleet menestyksekkäitä ja nostavat siellä olevien yritysten myyntiä. Jotkut yritykset eivät kuitenkin hyödy kävelykaduista, kun taas toiset hyötyvät paljon kun katu muuttuu kävelykaduksi. Tämä pro gradu -tutkielma tutkii kävelykatujen kaupallista rakennetta, jotta saataisiin selville minkätyyppiset yritykset löytyvät kävelykadulta. Tuloksia verrataan sen kaupallisen keskusvyöhykkeen kaupalliseen rakenteeseen missä kävelykatu sijaitsee. Näin saadaan selville erot kaupallisessa rakenteessa. Pro gradu tutkii myös miten tavallisia ketjuyritykset ovat kävelykaduilla ja kaupallisissa keskusvyöhykkeissä. Tutkimusaineisto koottiin kaupallisen inventoinnin avulla, joka suoritettiin kolmessa suomalaisessa kaupungissa: Tammisaaressa, Keravalla ja Porissa. Saatu aineisto luokiteltiin ja tulokset piirrettiin kartalle. Perustilastollisia menetelmiä käytettiin tulosten analysoimisessa. Tulokset eriteltiin kävelykadun, kauppakeskusten ja muiden paikkojen osalta ja luokiteltiin yleisluokkiin vähittäiskauppa, ravintola ja muu palvelu. Tulokset näyttävät, että on olemassa selkeitä eroja kun vertaa kävelykatuja ja kaupallisia keskusvyöhykkeitä. Kävelykaduilla on paljon enemmän vähittäiskauppoja, etenkin muotikauppoja, kuin muilla kaduilla. Kauppakeskuksilla on samantapainen kaupallinen rakenne kuin kävelykaduilla kun taas muilla kaduilla esiintyy vähemmän vähittäiskauppoja ja enemmän palveluyrityksiä. Ravintolat ovat melkein yhtä tavallisia koko kaupallisessa keskusvyöhykkeessä. Ketjuyritysten osalta tulokset ovat epäselviä. On olemassa osviittaa siitä, että ne ovat tavallisempia kävelykaduilla, etenkin suurissa kaupungeissa. Saatua tulosta ei ole kuitenkin tarpeeksi, jotta varmaa tietoa olisi saatu. Viimeisten 10–15 vuoden ajan Suomen kävelykadut ovat muuttuneet enemmän ravintolavaltaisiksi muiden palveluiden kustannuksella. Vähittäiskauppojen määrä on pysynyt vakaana. Suomalaiset kävelykadut eroavat kaupalliselta rakenteeltaan pohjoismaisista kävelykaduista, joilla on enemmän vähittäiskauppoja ja vähemmän palveluyrityksiä. Tapauskohtaisissa tuloksissa esiintyy paljon eroavaisuuksia. Paikalliset tekijät ovat usein voimakkaampia kuin yleiset teoriat kauppojen sijainnista kävelykaduilla. Yleisesti ottaen tulokset tukevat teoreettista viitekehystä. Tulokset antavat tarkempaa tietoa kävelykatujen ja kaupallisten keskusvyöhykkeiden kaupallisesta rakenteesta ja siitä, mitkä tekijät tähän vaikuttaa.

Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C

Cylindrical specimens of textured commercial pure alpha-titanium plate, cut with the cylinder axis along the rolling direction for one set of experiments and in the long transverse direction for the other set, were compressed at strain rates in the range of 0.001 to 100 s-1 and temperatures in the range of 25-degrees-C to 400-degrees-C. At strain rates greater-than-or-equal-to 1 s-1, both sets of specimens exhibited adiabatic shear bands, but the intensity of shear bands was found to be higher in the rolling direction specimens than in the long transverse direction specimens. At strain rates -0.1 s-1, the material deformed in a microstructurally inhomogeneous fashion. For the rolling direction specimens, cracking was observed at 100-degrees-C and at strain rates -0.1 s-1. This is attributed to dynamic strain aging. Such cracking was not observed in the long transverse specimens. The differences in the intensity of adiabatic shear bands and that of dynamic strain aging between the two sets of test specimens are attributed to the strong crystallographic texture present in these plates.

Electrochemical Determination of L-Dopa in Mucuna pruriens Seeds, Leaves and Commercial Siddha Product Using Gold Modified Pencil Graphite Electrode

In the present work a gold modified pencil graphite electrode (GPGE) was used for the determination of L-dopa present in the aqueous extracts of Mucuna pruriens seeds (MPS), Mucuna pruriens leaves (MPL) and Commercial Siddha Product (CSP). The GPGE shows excellent electrocatalytic activity towards the oxidation of both L-dopa and ascorbic acid (AA), with the separation of peak potential of 98 mV. The differential pulse voltammetric (DPV) results indicated that the detection limit for L-dopa was 1.54 mu M (S/N=3). This method can be successfully applied for the determination of L-dopa in real samples.

Synthesis and Microstructure of Laser Surface Alloyed Al–Sn–Si Layer on Commercial Aluminum Substrate

A new type of bearing alloy containing ultrafine sized tin and silicon dispersions in aluminum was designed using laser surface alloying and laser remelting techniques. The microstructures of these non-equilibrium processed alloys were studied in detail using scanning and transmission electron microscopy. The microstructures revealed three distinct morphologies of tin particles namely elongated particles co-existing with silicon, globular particles, and very fine particles. Our detailed analyses using cellular growth theories showed that the formation of these globular tin particles was due to the pinching off of the tin rich liquid in the inter-cellular space by the growth of aluminum secondary dendrite arms. Evidence of fine recrystallized aluminum grains at the top layer due to constrained solidification was shown. Thermal analyses suggested that melting of the spherical shaped tin particles was controlled by the binary aluminum-tin eutectic reaction, whereas non-spherical tin particles melted via the tin-silicon eutectic reaction.

Expediency of Penetration Ratio and Evaluation of Mean Throughput for Safety and Commercial Applications in VANETs

Vehicular ad hoc network (VANET) applications are principally categorized into safety and commercial applications. Efficient traffic management for routing an emergency vehicle is of paramount importance in safety applications of VANETs. In the first case, a typical example of a high dense urban scenario is considered to demonstrate the role of penetration ratio for achieving reduced travel time between source and destination points. The major requirement for testing these VANET applications is a realistic simulation approach which would justify the results prior to actual deployment. A Traffic Simulator coupled with a Network Simulator using a feedback loop feature is apt for realistic simulation of VANETs. Thus, in this paper, we develop the safety application using traffic control interface (TraCI), which couples SUMO (traffic simulator) and NS2 (network simulator). Likewise, the mean throughput is one of the necessary performance measures for commercial applications of VANETs. In the next case, commercial applications have been considered wherein the data is transferred amongst vehicles (V2V) and between roadside infrastructure and vehicles (I2V), for which the throughput is assessed.