基于Windows CE的HIRFL-CSR前端控制系统设计与实现

介绍了一个基于WindowsCE的嵌入式分布控制系统,系统基于以太网和现场总线连接,节点用嵌入式平板计算机实现。给出了系统的硬件组成和软件设计,该系统已应用于HIRFL-CSR前端控制系统。

~(142)Ce的新激发态及其经验壳模型研究

利用 42 0MeV　82 Se轰击1 39La引起的深部非弹反应和在束γ谱学方法研究了1 4 2 Ce的中高自旋激发态 .识别出了激发能为 2 62 5,2 995和 3 83 4keV的 3个新能级 ,自旋、宇称分别被指定为 8+,9(- ) 和 1 1 (- ) .发现这些能级非常好地符合N=84偶偶核转晕能级的系统性 .利用经验壳模型计算了1 4 2 Ce的中高自旋激发态的激发能 ,计算结果比较好地重现了实验值 .对它们的结构进行了讨论 ,表明在1 4 2 Ce的中高自旋激发态中以单粒子激发为主

~(130)Ce(EC+β~+)衰变研究及其放射化学分离

利用兰州SFC加速的16O束轰击同位素118Sn ,由熔合蒸发 4n反应产生目标核13 0 Ce。为了消除本底干扰并指定13 0 Ce核 ,采用溶剂萃取法对He - jet带传输系统从靶室传输出来的反应产物进行了离线分离与纯化。将目标核13 0 Ce从大量的靶材料、反应产物及母核中分离出来 ,快速制成薄源后在铅室中进行γ单谱测量及X -γ、γ -γ符合测量。从化学分离后的产物中观察到了半衰期为 2 2 .9min的 10 8条γ射线 ,其中 10 7条是新发现的 ,该活性被指定为13 0 Ce。在此基础上 ,进一步研究这些γ线的级联关系 ,建立了缺中子同位素13 0 Ce较完整的 (EC + β+ )衰变纲图。为118Sn(16O ,4n) 13 0 Ce反应体系建立的放化分离流程的分离时间仅 10min ,化学产额大于70 %。化学分离除去 98%以上的核反应生成的13 0 La ,对其它杂质的去污完全满足13 0 Ce(EC + β+ )衰变研究的要求。

缺中子核素~(129)Ce的(EC/β~+)衰变

利用 10 2MeV16O6+束轰击同位素靶117Sn ,通过熔合蒸发 4n反应产生核素12 9Ce.由氦喷嘴快速带传输系统将反应产物送到低本底区 .通过化学分离来制备待测的Ce样品 ,与此同时用16O束轰击117Sn的两种相邻的同位素靶118Sn和116Sn ,并比较上述 3种反应中的产物来进一步区分元素Ce的不同的同位素 .结果一种半衰期为 4.1min的活性被鉴定为12 9Ce.基于X -γ -t和γ -γ -t符合测量 ,建议了包括 5 1条射线在内的12 9Ce的 (EC/ β+)衰变纲图 .其中 ,12 9Ce基态直接馈送到12 9La基态的份额 ( 2 6± 7) %是用观测到的12 9La衰变的 2 78.6keV的γ射线的生长和衰变曲线估计出来的 .另外还给出了用La Kα X射线和6 8.2keVγ射线开门的γ谱以及典型的衰变γ射线的时间谱

Multi-quasiparticle gamma-band structure in neutron-deficient Ce and Nd isotopes

The newly developed multi-quasiparticle triaxial projected shell model approach is employed to study the high-spin band structures in neutron-deficient even-even Ce- and Nd-isotopes. It is observed that gamma-bands are built on each intrinsic configuration of the triaxial mean-field deformation. Due to the fact that a triaxial configuration is a superposition of several K-states, the projection from these states results in several low-lying bands originating from the same intrinsic configuration. This generalizes the well-known concept of the surface gamma-oscillation in deformed nuclei based on the ground-state to gamma-bands built on multi-quasiparticle configurations. This new feature provides an alternative explanation on the observation of two I = 10 aligning states in Ce-134 and both exhibiting a neutron character. (C) 2009 Elsevier B.V. All rights reserved.

Study of multi-quasiparticle excited states in Ce-139

High-spin states in Ce-139 have been populated using the Te-130(C-12, 3n) reaction at beam energy of 50MeV. The level scheme of Ce-139 has been revised and extended greatly up to E=5765.0keV. The level structure of Ce-139 shows typical characteristics of spherical nucleus, and the high-spin states were formed by the excitations of valence nucleons. Energies of the yrast and near yrast high-spin states in Ce-139 have been calculated by the empirical shell model, and the multi-quasiparticle nature of high-spin excited states has been discussed.

Effects of rare earth on the structure and properties of Mg–6Zn–5Al–4Gd–1RE (RE = Ce or Y) alloys

The microstructures and mechanical properties of Mg-6Zn-5Al-4Gd-1RE (RE = Ce or Y) alloys were investigated. The addition of Ce or Y obviously refines the grain size for the Mg-6Zn-5Al-4Gd-based alloy, while the Y element has a better refining effect. The Ce and Y show different grain-refining mechanisms: Ce addition mostly promotes the growth of secondary dendrite, while Y addition mainly increases the heterogeneous nucleation sites.

BaYF_5:Ce~(3+)纳米粒子的制备与光谱性质

在水/十六烷基三甲基溴化铵(CTAB)/正丁醇/正辛烷微乳液体系中成功的合成了BaYF5:Ce3+纳米粒子。运用X射线衍射(XRD)、环境扫描电子显微镜(ESEM)和荧光光谱等测试技术对所制备产物进行了表征。

Effects of doping lanthanide ions in YAG : Ce system on the spectral properties of Ce3+

(Y0.95Ln(0.01)Ce(0.04))(3)Al5O12 phosphors were synthesized by high-temperature solid state reaction under reducing atmosphere and the doping effects of lanthanide ions (Ln(3+)) on the luminescence properties of phosphors were studied. YAG: Ce, Ln spectra of excitation and emission show that the influence between Ce3+ and Ln(3+) can be divided into the following three types

The effect of La or Ce on ageing response and mechanical properties of cast Mg-Gd-Zr alloys

Mg-8Gd-0.6Zr-1RE (RE = La or Ce, wt.%) alloys were prepared by casting. The microstructures, age hardening behavior and mechanical properties were investigated. The results show that the addition of 1 wt.% La or Ce to a Mg-8Gd-0.6Zr alloy reduces the dendrite arm spacing and slightly improves the mechanical properties and age hardening response.

Micro structures, tensile properties and corrosion behavior of die-cast Mg-4Al-based alloys containing La and/or Ce

In order to study the properties of Mg-Al-RE (AE) series alloys, the Mg-4Al-4RE-0.4Mn (RE= La, Ce/La mischmetal or Ce) alloys were developed. Their microstructures, tensile properties and corrosion behavior have been investigated. The results show that the phase compositions of Mg-4Al-4La-0.4Mn alloy consist of alpha-Mg and Al11La3 phases. While two binary Al-RE (RE = Ce/La) phases, Al11RE3 and Al2RE, are formed in Mg-4Al-4Ce/La-0.4Mn alloy, and Al11Ce3 and Al2Ce are formed in Mg-4Al-4Ce-0.4Mn alloy.