Explaining dinophysis cf. acuminata abundance in Antifer (Normandy, France) using dynamic linear regression

Classical regression analysis can be used to model time series. However, the assumption that model parameters are constant over time is not necessarily adapted to the data. In phytoplankton ecology, the relevance of time-varying parameter values has been shown using a dynamic linear regression model (DLRM). DLRMs, belonging to the class of Bayesian dynamic models, assume the existence of a non-observable time series of model parameters, which are estimated on-line, i.e. after each observation. The aim of this paper was to show how DLRM results could be used to explain variation of a time series of phytoplankton abundance. We applied DLRM to daily concentrations of Dinophysis cf. acuminata, determined in Antifer harbour (French coast of the English Channel), along with physical and chemical covariates (e.g. wind velocity, nutrient concentrations). A single model was built using 1989 and 1990 data, and then applied separately to each year. Equivalent static regression models were investigated for the purpose of comparison. Results showed that most of the Dinophysis cf. acuminata concentration variability was explained by the configuration of the sampling site, the wind regime and tide residual flow. Moreover, the relationships of these factors with the concentration of the microalga varied with time, a fact that could not be detected with static regression. Application of dynamic models to phytoplankton time series, especially in a monitoring context, is discussed.

Preservación de espermatozoides de la cola del epidídimo bovino en condiciones de campo

La cola del epidídimo constituye un reservorio de espermatozoides que han alcanzado la madurez biológica a través de su trayecto por el largo conducto del epidídimo (Robaire y Hinton, 2014). Los espermatozoides de esta reserva epididimaria pueden obtenerse postmortem o a través de biopsias y utilizarse con fines reproductivos (Albers y Barrios, 2011). El presente trabajo tiene como objetivo principal probar algunas condiciones iniciales de manejo de espermatozoides de la cola del epidídimo de bovinos y su incidencia en parámetros específicos del análisis seminal.

Estandarización de un protocolo de criopreservación de espermatozoides bovinos recuperados de la cola del epidídimo

Tesis (Médico Veterinario). -- Universidad de La Salle. Facultad de Ciencias Agropecuarias. Programa de Medicina Veterinaria, 2013

Determinación de anticuerpos anti-diarrea viral bovina (DVB) mediante elisa competitivo en una población cautiva de venados cola blanca (Odocoileus virginianus) en Cundinamarca, Colombia

Tesis (Médico Veterinario). -- Universidad de La Salle. Facultad de Ciencias Agropecuarias. Programa de Medicina Veterinaria, 2013

¡Hola, zapatín con cola! : dime con qué andas ...

Fondo Margaritainés Restrepo

Evaluación cuali-cuantitativa de espermatozoides de la cola del epedídimo de cuyes cavia porcellus criollos y mejorados en dos edades reproductivas

El objetivo de esta investigación fue evaluar las características cuali-cuantitativas de espermatozoides de cuyes extraídos de la cola del epidídimo según su fenotipo y edad reproductiva. Se realizó en la granja Irquis de la U. de Cuenca en 20 reproductores identificados por sus características fenotípicas y dispuestos en cuatro grupos: 5 criollos jóvenes (CJ), 5 criollos adultos (CA), 5 mejorados jóvenes (MJ), y 5 mejorados adultos (MA). Los cuyes fueron hemicastrados y de los epidídimos fueron disectados la cola sobre una caja petri. Se recuperó los espermatozoides por Swim up, diluidos en 1ml de medio (18% rafinosa y 3% leche descremada), procesados con Triladyl®, refrigerados a 5oC/1 hora, y equilibrados por 0, 2, 24, 48, 96, 192, y 360 horass para su análisis de viabilidad espermática. Se congelaron únicamente los espermatozoides de 2 hs de equilibrio en vapores de nitrógeno. Se usó un DCA de 2x2: fenotipo y edad, y se usó un ANOVA para comprobar significancia. Se obtuvo interacción (P<0,05) entre factores con eficiencia atribuida a MJ a las 0 hs: en Concentración (C) y Anormalidades de cola (AC), a las 24 hs: en motilidad individual (MIP) y 48 hs: en Vitalidad (VE). En MIP no se encontró diferencias (P>0,05) en ningún tiempo de medición. En VE sólo encontró diferencias (P<0,05) a las 96 hs (CJ:18,0;MJ:10,2;MA:8,6;CA:6,0%). En anormalidades totales (AT) sólo se encontró diferencias (P<0,05) a las 0 hs (MJ:26,3;CJ:32,6;MA:36,2;CA:38,5%); y en AC se encontró diferencias (P<0,05) a las 0 hs (MJ:4,6; CJ:9,5; CA:11,5; MA:16,4%), y a las 48 hs (CA:5,7;CJ:7,3;MJ:16,0;MA:18,1%). En Integridad de la membrana (HOS-Test) se obtuvo (P<0,05) diferencias a las 2 hs (MJ:20,0; MA:13,1;CA:10,7;CJ:9,0%) y a las 96 hs (CA:25,4;CJ:15,3;MJ:9,7; MA:8,8%). A la congelabilidad no se obtuvo sobrevivencia de espermatozoides en ninguno de los tratamientos. En conclusión, la cantidad y calidad de espermatozoides epididimarios de cuyes identificados fenotípicamente varía según su edad; sin embargo, no se pudo comprobar su variación en la congelabilidad mostrándose absolutamente inviables a la crío conservación

USO DE SISTEMAS DE INFORMACION GEOGRAFICA PARA ANALIZAR IMPACTOS DE ACTIVIDADES HUMANAS SOBRE EL HABITAT POTENCIAL DEL VENADO COLA BLANCA (odocoileus virginianus), GUANACASTE, COSTA RICA.

El presente trabajo se realizó en el distrito central del cantón de Bagaces, Guanacaste, Costa Rica y tiene como propósito evaluar el impacto de la II fase del proyecto de Riego Arenal-Tempisque en el hábitat potencial del venado cola blanca (odocoileus virginianus). Los resultados del estudio indican que la II etapa del Proyecto de Riego impactará 4.633 hectáreas del hábitat clasificado como alto para el venado. SUMMARY The aim of this paper is to discuss and illustrate the usefulness of the GIS in the evaluation of the impact of the II Phase of the Arenal-Tempisque irrigation project on the habitat of white-tailed deer. The study area is the central canton of Bagaces in Guanacaste, Costa Rica. Once fully developed, the irrigation project will impact 4633 hectares of prime deer habitat.

Staphylococcus Aureus Enterotoxins A And B Inhibit Human And Mice Eosinophil Chemotaxis And Adhesion In Vitro.

Staphylococcus aureus aggravates the allergic eosinophilic inflammation. We hypothesized that Staphylococcus aureus-derived enterotoxins directly affect eosinophil functions. Therefore, this study investigated the effects of Staphylococcal enterotoxins A and B (SEA and SEB) on human and mice eosinophil chemotaxis and adhesion in vitro, focusing on p38 MAPK phosphorylation and intracellular Ca(2+) mobilization. Eosinophil chemotaxis was evaluated using a microchemotaxis chamber, whereas adhesion was performed in VCAM-1 and ICAM-1-coated plates. Measurement of p38 MAPK phosphorylation and intracellular Ca(2+) levels were monitored by flow cytometry and fluorogenic calcium-binding dye, respectively. Prior incubation (30 to 240 min) of human blood eosinophils with SEA (0.5 to 3 ng/ml) significantly reduced eotaxin-, PAF- and RANTES-induced chemotaxis (P<0.05). Likewise, SEB (1 ng/ml, 30 min) significantly reduced eotaxin-induced human eosinophil chemotaxis (P<0.05). The reduction of eotaxin-induced human eosinophil chemotaxis by SEA and SEB was prevented by anti-MHC monoclonal antibody (1 μg/ml). In addition, SEA and SEB nearly suppressed the eotaxin-induced human eosinophil adhesion in ICAM-1- and VCAM-1-coated plates. SEA and SEB prevented the increases of p38 MAPK phosphorylation and Ca(2+) levels in eotaxin-activated human eosinophils. In separate protocols, we evaluated the effects of SEA on chemotaxis and adhesion of eosinophils obtained from mice bone marrow. SEA (10 ng/ml) significantly reduced the eotaxin-induced chemotaxis along with cell adhesion to both ICAM-1 and VCAM-1-coated plates (P<0.05). In conclusion, the inhibition by SEA and SEB of eosinophil functions (chemotaxis and adhesion) are associated with reductions of p38 MAPK phosphorylation and intracellular Ca(2+) mobilization.

Scanning electron microscopic study of the in situ effect of salivary stimulation on erosion and abrasion in human and bovine enamel

This in situ study investigated, using scanning electron microscopy, the effect of stimulated saliva on the enamel surface of bovine and human substrates submitted to erosion followed by brushing abrasion immediately or after one hour. During 2 experimental 7-day crossover phases, 9 previously selected volunteers wore intraoral palatal devices, with 12 enamel specimens (6 human and 6 bovine). In the first phase, the volunteers immersed the device for 5 minutes in 150 ml of a cola drink, 4 times a day (8h00, 12h00, 16h00 and 20h00). Immediately after the immersions, no treatment was performed in 4 specimens (ERO), 4 other specimens were immediately brushed (0 min) using a fluoride dentifrice and the device was replaced into the mouth. After 60 min, the other 4 specimens were brushed. In the second phase, the procedures were repeated but, after the immersions, the volunteers stimulated the salivary flow rate by chewing a sugar-free gum for 30 min. Enamel superficial alterations of all specimens were then evaluated using a scanning electron microscope. Enamel prism core dissolution was seen on the surfaces submitted to erosion, while on those submitted to erosion and to abrasion (both at 0 and 60 min) a more homogeneous enamel surface was observed, probably due to the removal of the altered superficial prism layer. For all the other variables - enamel substrate and salivary stimulation -, the microscopic pattern of the enamel specimens was similar.

The influence of residual salivary fluoride from dentifrice on enamel erosion: an in situ study

The objective of this study was to assess the salivary residual effect of fluoride dentifrice on human enamel subjected to an erosive challenge. This crossover in situ study was performed in two phases (A and B), involving ten volunteers. In each phase, they wore acrylic palatal appliances, each containing 3 human enamel blocks, during 7 days. The blocks were subjected to erosion by immersion of the appliances in a cola drink for 5 minutes, 4 times a day. Dentifrice was used to brush the volunteers’ teeth, 4 times a day, during 1 minute, before the appliance was replaced into the mouth. In phases A and B the dentifrices used had the same formulation, except for the absence (PD) or presence (FD) of fluoride, respectively. Enamel alterations were determined using profilometry, microhardness (%SMHC), acid- and alkali-soluble F analysis. The data were tested using ANOVA (p < 0.05). The concentrations (mean ± SD) of alkali- and acid-soluble F (µgF/cm²) were, respectively, PD: 1.27ª ± 0.70/2.24A ± 0.36 and FD: 1.49ª ± 0.44/2.24A ± 0.67 (p > 0.05). The mean wear values (± SD, µm) were PD: 3.63ª ± 1.54 and FD: 3.54ª ± 0.90 (p > 0.05). The mean %SMHC values (± SD) were PD: 89.63ª ± 4.73 and FD: 87.28ª ± 4.01 (p > 0.05). Thus, we concluded that the residual fluoride from the fluoride-containing dentifrice did not protect enamel against erosion.

Effect of staining solutions and repolishing on color stability of direct composites

OBJECTIVES: The purpose of this study was to assess the color change of three types of composite resins exposed to coffee and cola drink, and the effect of repolishing on the color stability of these composites after staining. MATERIALS AND METHODS: Fifteen specimens (15 mm diameter and 2 mm thick) were fabricated from microhybrid (Esthet-X; Dentsply and Filtek Z-250; 3M ESPE) and high-density hybrid (Surefil; Dentsply) composites, and were finished and polished with aluminum oxide discs (Sof-Lex; 3M ESPE). Color of the specimens was measured according to the CIE L*a*b* system in a refection spectrophotometer (PCB 6807; BYK Gardner). After baseline color measurements, 5 specimens of each resin were immersed in different staining solutions for 15 days: G1 - distilled water (control), G2 - coffee, G3 - cola soft drink. Afterwards, new color measurement was performed and the specimens were repolished and submitted to new color reading. Color stability was determined by the difference (ΔE) between the coordinates L*, a*, and b* obtained from the specimens before and after immersion into the solutions and after repolishing. RESULTS: There was no statistically signifcant difference (ANOVA, Tukey's test; p>0.05) among the ΔE values for the different types of composites after staining or repolishing. For all composite resins, coffee promoted more color change (ΔE>3.3) than distilled water and the cola soft drink. After repolishing, the ΔE values of the specimens immersed in coffee decreased to clinically acceptable values (ΔE<3.3), but remained signifcantly higher than those of the other groups. CONCLUSIONS: No signifcant difference was found among composite resins or between color values before and after repolishing of specimens immersed in distilled water and cola. Immersing specimens in coffee caused greater color change in all types of composite resins tested in this study and repolishing contributed to decrease staining to clinically acceptable ΔE values.

Surface and subsurface erosion of primary enamel by acid beverages over time

This study evaluated the influence of a cola-type soft drink and a soy-based orange juice on the surface and subsurface erosion of primary enamel, as a function of the exposure time. Seventy-five primary incisors were divided for microhardness test (n=45) or scanning electron microscopy (SEM) analysis (n=30). The specimens were randomly assigned to 3 groups: 1 - artificial saliva (control); 2 - cola-type soft drink; and 3 - soy-based orange juice. Immersion cycles in the beverages were undertaken under agitation for 5 min, 3 times a day, during 60 days. Surface microhardness was measured at 7, 15, 30, 45 and 60 days. After 60 days, specimens were bisected and subsurface microhardness was measured at 30, 60, 90, 120, 150 and 200 µm from the surface exposed. Data were analyzed by ANOVA and Tukey’s test (a=0.05). Groups 2 and 3 presented similar decrease of surface microhardness. Regarding subsurface microhardness, group 2 presented the lowest values. SEM images revealed that after 60 days the surfaces clearly exhibited structural loss, unlike those immersed in artificial saliva. It may be concluded that erosion of the surfaces exposed to the cola-type soft drink was more accentuated and directly proportional to the exposure time.

Influence of surface sealant on the translucency of composite resin: effect of immersion time and immersion media

This study evaluated the effect of surface sealant on the translucency of composite resin immersed in different solutions. The study involved the following materials: Charisma, Fortify and coffee, Coca-Cola®, tea and artificial saliva as solutions. Sixty-four specimens (n = 8) were manufactured and immersed in artificial saliva at 37 ± 1 °C. Samples were immersed in the solutions for three times a day and re-immersed in artificial saliva until the translucency readings. The measurements were carried out at nine times: T1 - 24 hours after specimen preparation, T2 - 24 hours after immersion in the solutions, T3 - 48 hours and T4 to T9 - 7, 14, 21, 30, 60 and 90 days, respectively, after immersion. The translucency values were measured using a JOUAN device. The results were subjected to ANOVA and Tukey's test at 5%. The surface sealant was not able to protect the composite resin against staining, the coffee showed the strongest staining action, followed by tea and regarding immersion time, a significant alteration was noted in the translucency of composite resin after 21 days.

Demonstrando os fundamentos, potencialidades e limitações da análise por injeção seqüencial

The sensitivity and accuracy of sequential injection methods are dependent on efficient overlapping of reagent and sample zones as they are propelled toward the detector cell. The formation of the reduced phosphomolybdic acid is used to demonstrate that the overlapping efficiency in a fixed reaction coil relies on a suitable choice of reagent to sample volume ratio. Additionally, under poor mixing conditions or highly concentrated samples, the reaction extension is strongly dependent on the reagent concentration. The zone-sampling concept is exploited to determine phosphate in cola-based soft drinks after in-line dilution in an auxiliary coil.

A novel disposable electrochemical microcell: construction and characterization

An alternative technique for the fabrication of disposable electrochemical microcells containing working, reference and auxiliary electrodes on a single device is reported. The procedure is based on thermal-transfer of toner masks onto CD-R (recordable compact discs) gold surfaces to define the layout of the electrodes (contour). In a subsequent step, the layout is manually painted with a permanent marker pen. The unprotected gold surface is conveniently etched (chemical corrosion) and the ink is then easily removed with ethanol, generating gold surfaces without contamination. The final and reproducible area of the electrodes is defined by heat transference of a second toner mask. Silver epoxy is deposited on one of the gold bands which is the satisfactorily used as reference electrode. These microcells were electrochemically characterized by cyclic, linear, and square wave voltammetry, and several electroactive species were used as model systems. The area reproducibility of the electrodes for different microcells was studied and a relative standard deviation better than 1,0% (n = 10) was obtained. Disposable electrochemical microcells were successfully used in analysis of liquid samples with volumes lower than 200 µL and good stability and reproducibility (RSD less than 2.0%) were achieved. These microcells were also evaluated for quantification of paracetamol and dipyrone in pharmaceutical formulations.