Karyotype diversity among predatory Reduviidae (Heteroptera)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Karyotype characterization reveals an up and down of 45S and 5S rDNA sites in Crotalaria (Leguminosae-Papilionoideae) species of the section Hedriocarpae subsection Macrostachyae

The genus Crotalaria is one of the largest within the family Leguminosae-Papilionoideae, with more than 600 species. However, few karyotypes have been described. In the present paper, five species belonging to the section Hedriocarpae were studied (subsection Machrostachyae), in order to better understand chromosomal evolution in Crotalaria. The results reveals that all species presented 2n = 2x = 16 with symmetrical karyotypes, and slight differences in the chromosome morphology. A secondary constriction was identified at short arm of the pair 1. The 45S rDNA was mapped in the secondary constriction and adjacent heterochromatin (NOR-heterochromatin) and a minor site was identified in C. ochroleuca. The 5S rDNA was mapped linked to 45S rDNA at chromosome 1 short arm in all species. Additional sites for 5S rDNA were identified in C. pallida, C. striata and C. mucronata. Heterochromatin blocks around the centromeres are not CMA(+) neither DAPI(+). The karyotypes of the subsection Macrostachyae are characterized by an inversion at chromosome pair one in relation to previous specialized floral species analyzed. Additional sites of 45S and 5S rDNA were assumed to be a result of transposition events by different ways. The results suggest heterochromatin differentiation and the position of ribosomal genes indicates chromosomal rearrangements during evolution. Karyotype characteristics corroborate the morphological infrageneric classification.

THE FIRST DETERMINATION OF THE VISCOSITY PARAMETER IN THE CIRCUMSTELLAR DISK OF A Be STAR

Be stars possess gaseous circumstellar decretion disks, which are well described using standard alpha-disk theory. The Be star 28 CMa recently underwent a long outburst followed by a long period of quiescence, during which the disk dissipated. Here we present the first time-dependent models of the dissipation of a viscous decretion disk. By modeling the rate of decline of the V-band excess, we determine that the viscosity parameter alpha = 1.0 +/- 0.2, corresponding to a mass injection rate (M) over dot = (3.5 +/- 1.3) x 10(-8) M-circle dot yr(-1). Such a large value of a suggests that the origin of the turbulent viscosity is an instability in the disk whose growth is limited by shock dissipation. The mass injection rate is more than an order of magnitude larger than the wind mass-loss rate inferred from UV observations, implying that the mass injection mechanism most likely is not the stellar wind, but some other mechanism.

A regional multirnodulus algorithm for blind equalization of QAM signals: Introduction and steady-state analysis

It is well known that constant-modulus-based algorithms present a large mean-square error for high-order quadrature amplitude modulation (QAM) signals, which may damage the switching to decision-directed-based algorithms. In this paper, we introduce a regional multimodulus algorithm for blind equalization of QAM signals that performs similar to the supervised normalized least-mean-squares (NLMS) algorithm, independently of the QAM order. We find a theoretical relation between the coefficient vector of the proposed algorithm and the Wiener solution and also provide theoretical models for the steady-state excess mean-square error in a nonstationary environment. The proposed algorithm in conjunction with strategies to speed up its convergence and to avoid divergence can bypass the switching mechanism between the blind mode and the decision-directed mode. (c) 2012 Elsevier B.V. All rights reserved.

Numerical assessment of stability of interface discontinuous finite element pressure spaces

The stability of two recently developed pressure spaces has been assessed numerically: The space proposed by Ausas et al. [R.F. Ausas, F.S. Sousa, G.C. Buscaglia, An improved finite element space for discontinuous pressures, Comput. Methods Appl. Mech. Engrg. 199 (2010) 1019-1031], which is capable of representing discontinuous pressures, and the space proposed by Coppola-Owen and Codina [A.H. Coppola-Owen, R. Codina, Improving Eulerian two-phase flow finite element approximation with discontinuous gradient pressure shape functions, Int. J. Numer. Methods Fluids, 49 (2005) 1287-1304], which can represent discontinuities in pressure gradients. We assess the stability of these spaces by numerically computing the inf-sup constants of several meshes. The inf-sup constant results as the solution of a generalized eigenvalue problems. Both spaces are in this way confirmed to be stable in their original form. An application of the same numerical assessment tool to the stabilized equal-order P-1/P-1 formulation is then reported. An interesting finding is that the stabilization coefficient can be safely set to zero in an arbitrary band of elements without compromising the formulation's stability. An analogous result is also reported for the mini-element P-1(+)/P-1 when the velocity bubbles are removed in an arbitrary band of elements. (C) 2012 Elsevier B.V. All rights reserved.

On response time reduction of electrothermomechanical MEMS using topology optimization

Electrothermomechanical MEMS are essentially microactuators that operate based on the thermoelastic effect induced by the Joule heating of the structure. They can be easily fabricated and require relatively low excitation voltages. However, the actuation time of an electrothermomechanical microdevice is higher than the actuation times related to electrostatic and piezoelectric actuation principles. Thus, in this research, we propose an optimization framework based on the topology optimization method applied to transient problems, to design electrothermomechanical microactuators for response time reduction. The objective is to maximize the integral of the output displacement of the actuator, which is a function of time. The finite element equations that govern the time response of the actuators are provided. Furthermore, the Solid Isotropic Material with Penalization model and Sequential Linear Programming are employed. Finally, a smoothing filter is implemented to control the solution. Results aiming at two distinct applications suggest the proposed approach can provide more than 50% faster actuators. (C) 2012 Elsevier B.V. All rights reserved.

Cytogenetic and molecular analyses in troglobitic and epigean species of Pimelodella (Siluriformes: Heptapteridae) from Brazil

Samples from seven different locations of the genus Pimelodella were genetically examined, two caves (exclusively subterranean, upper Tocantins River and Sao Francisco River) and five epigean (from upper Parana River basin). Cytogenetic analyses revealed the same diploid number (2n=46) for all species besides similarities in both number and location of nucleolar organizer regions and C bands. FISH with 5S rDNA probes and CMA(3) staining indicated significant differences among the studied species. Application of PCR-RFLP in ATPase 6 and 8 mitochondrial genes allowed building a minimum evolution phenogram identifying the close evolutionary relationship among groups. Both chromosomal and molecular data were useful to infer the relationships among studied Pimelodella species.

Finite element methods for the Stokes system based on a Zienkiewicz type N-simplex

Hermite interpolation is increasingly showing to be a powerful numerical solution tool, as applied to different kinds of second order boundary value problems. In this work we present two Hermite finite element methods to solve viscous incompressible flows problems, in both two- and three-dimension space. In the two-dimensional case we use the Zienkiewicz triangle to represent the velocity field, and in the three-dimensional case an extension of this element to tetrahedra, still called a Zienkiewicz element. Taking as a model the Stokes system, the pressure is approximated with continuous functions, either piecewise linear or piecewise quadratic, according to the version of the Zienkiewicz element in use, that is, with either incomplete or complete cubics. The methods employ both the standard Galerkin or the Petrov–Galerkin formulation first proposed in Hughes et al. (1986) [18], based on the addition of a balance of force term. A priori error analyses point to optimal convergence rates for the PG approach, and for the Galerkin formulation too, at least in some particular cases. From the point of view of both accuracy and the global number of degrees of freedom, the new methods are shown to have a favorable cost-benefit ratio, as compared to velocity Lagrange finite elements of the same order, especially if the Galerkin approach is employed.

Satisfacción del paciente de cirugía mayor ambulatoria con los ciudadanos anestésicos perioperatorios en relación con el miedo

Eliminadas las páginas en blanco del pdf

A new approach to solid modeling with trivariate

[EN]We present a new method to construct a trivariate T-spline representation of complex genuszero solids for the application of isogeometric analysis. The proposed technique only demands a surface triangulation of the solid as input data. The key of this method lies in obtaining a volumetric parameterization between the solid and the parametric domain, the unitary cube. To do that, an adaptive tetrahedral mesh of the parametric domain is isomorphically transformed onto the solid by applying a mesh untangling and smoothing procedure. The control points of the trivariate T-spline are calculated by imposing the interpolation conditions on points sited both on the inner and on the surface of the solid...

Carlos Martí Arís e i suoi eteronimi. Vocazione all'anonimo

Questa ricerca indaga la prospettiva investigativa di Carlos Martí Arís. È stato assunto il campo d’azione da lui prediletto, ovvero l’articolato rapporto che in architettura si instaura tra teoria e pratica, comprensivo delle svariate ricadute nel mondo dell’arte e della produzione umana in genere, che fanno del progetto architettonico un campo disciplinare complesso. La sua figura è però assunta in modo strumentale, come grimaldello per addentrarsi in un articolato ambito culturale, che se da un lato coincide con la sua città, Barcellona, dall’altro la trascende grazie a quei “ponti della conoscenza” che CMA interrottamente ha teso al suo intorno. Ci riferiamo alla sua costruzione teorica destinata a consolidare la storica reciprocità tra Italia e Spagna, le cui tematiche urbane e tipologiche ne sono la base, Milano e Barcellona ne sono gli estremi. Ci riferiamo al suo sguardo sull’esperienza del Movimento Moderno e il relativo tema della residenza. Ci riferiamo alla sua naturale vocazione al silenzio, che si oppone al fragoroso rumore della contemporaneità e affianca la discreta parola del mestiere: un modo per porsi all’ascolto. All’ascolto dell’altro e del mondo. Ci riferiamo, insomma, alla sua idea di architettura intesa come «territorio dissodato da tempi remoti»; come trama di corrispondenze sincroniche tra terre, tempi, fatti, uomini, vicini e lontani: condizione ideale per chi voglia disciogliere il proprio lavoro nei labirintici sentieri del mondo, indifferente al rischio di perdersi nell’oblio. Oggi, in cui il progetto architettonico risulta sempre più spesso veicolo di soggettive e arbitrarie sperimentazioni formali, la lezione di CMA indica una via d’uscita: un mo(n)do condiviso che all’arroganza opponga la discrezione, che persuada a celarsi nella tradizione e a porsi umilmente all’ombra dei maestri. Tradizione e Maestri, Eteronimi e Nomi, complementarità a cui CMA affida il suo progetto di anonimato, sovrapersonale e ostinatamente teso a rilevarne le relazioni inedite.

Influence of defects and disorder on anomalous Hall effect and spin Seebeck effect on permalloy and Heusler compounds

In dieser Arbeit wurden dünne Schichten von Heusler-Verbindungen hergestellt und auf ihre Transporteigenschaften hin untersucht.rnDer Anomale Hall-Effekt (AHE) ist dabei von besonderem Interesse. Er ist ein seit langer Zeit bekannter, jedoch noch nicht vollständig verstandener Transport-Effekt. Die meisten Veröffentlichungen theoretischer Arbeiten konzentrieren sich auf den Einfluss eines bestimmten Beitrags zum AHE. Tatsächlich gemessene experimentelle Daten können jedoch oft nicht in Einklang mit idealisierten Annahmen gebracht werden. rnDie vorliegende Arbeit diskutiert die Ergebnisse, welche aus Messungen von Materialien mit niedrigem Restwiderstand erhalten wurden. rnrnAls prototypische Materialien wurden hier hyphenation Heusler-Verbindungen untersucht. Als Material mit einer komplexen Topologie der Fermi-Fläche zeichnet sich dort der Einfluss von Defekten und der Unordnung der Kristallstruktur deutlich ab.rnrnDurch Verwendung von Filmen mit unterschiedlichem Grad der Unordnung können verschiedene Streumechanismen unterschieden werden. Für Co$_{2}$FeSi$_{0.6}$Al$_{0.4}$ and Co$_{2}$FeGa$_{0.5}$Ge$_{0.5}$ zeigt sich ein positiver AHE bei einer Unordnung vom Typ B2 und bei einer induzierten temperaturabh"angigen Streuung, wo hingegen eine Typ DO$_{3}$-Unordnung zusammen mit anderen möglichen intrinsischen Beiträgen einen negativen Effekt hervorruft.rnrnDarüber hinaus wurden die magneto-optische Kerr-Effekte (MOKE) dieser Verbindungen untersucht. Hierfür wurden Beiträge erster Ordnung als Funktion der intrinsischen und extrinsischen Parameter qualitativ analysiert. Auf den Einfluss der kristallinen Ordnung auf Beiträge zweiter Ordnung des MOKE-Signals wird ebenfalls eingegangen.rnrnDes Weiteren wurden dünne Schichten der Heusler-Verbindung Co$_{2}$MnAl auf MgO- und Si-Subs-traten (beide (100)) mit Hochfrequenz-Mag-netron-Sputtern erzeugt. Die zusammensetzung sowie die magnetischen und Transport-Eigenschaften wurden hinsichtlich unterschiedlicher Abscheidebedingungen systematisch untersucht.rnrnInsbesondere zeigt der AHE-Widerstand ein außerordentliches temperaturunabhängiges Verhalten in einem Bereich moderater Magnetfeldstärken von 0 bis 0.6,T. Hierf"ur wurde der nicht-diagonale Transport bei Temperaturen bis zu 300,$^{circ}$C analysiert. Die Daten zeigen die Eignung des Materials für Hall-Sensoren auch oberhalb der Raumtemperatur.rnrnJüngst wurde der Spin Seebeck-Effekt (SSE) entdeckt. Der Effekt aus dem Bereich der Spin-Kaloritronik erzeugt eine Spin-Spannung'' aufgrund eines Temperaturgradienten in magnetischen Materialien. Hier werden vorläufige Messungen des SSE in Ni$_{80}$Fe$_{20}$ und in Heusler-Verbindungen präsentiert.rn

Evaluation of Knowledge Regarding Diagnostic Strategies for Genetic Diseases in Select Residents

Genetics education for physicians has been a popular publication topic in the United States and in Europe for over 20 years. Decreasing numbers of medical genetics professionals and an increasing volume of genetic information has created a dire need for increased genetics training in medical school and in clinical practice. This study aimed to assess how well pediatrics-focused primary care physicians apply their general genetics knowledge to clinical genetic testing using scenario-based questions. We chose to specifically focus on knowledge of the diagnostic applicability of Chromosomal Microarray (CMA) technology in pediatrics because of its recent recommendation by the International Standard Cytogenomic Array (ISCA) Consortium as a first-tier genetic test for individuals with developmental disabilities and/or congenital anomalies. Proficiency in ordering baseline genetic testing was evaluated for eighty-one respondents from four pediatrics-focused residencies (categorical pediatrics, pediatric neurology, internal medicine/pediatrics, and family practice) at two large residency programs in Houston, Texas. Similar to other studies, we found an overall deficit of genetic testing knowledge, especially among family practice residents. Interestingly, residents who elected to complete a genetics rotation in medical school scored significantly better than expected, as well as better than residents who did not elect to complete a genetics rotation. We suspect that the insufficient knowledge among physicians regarding a baseline genetics work-up is leading to redundant (i.e. concurrent karyotype and CMA) and incorrect (i.e. ordering CMA to detect achondroplasia) genetic testing and is contributing to rising health care costs in the United States. Our results provide specific teaching points upon which medical schools can focus education about clinical genetic testing and suggest that increased collaboration between primary care physicians and genetics professionals could benefit patient health care overall.