818 resultados para Asian soybean rust
Resumo:
The use of cover crops in no-tillage systems can provide better conditions for the development of soybean plants with positive effects on grain yield and growth analysis techniques allow researchers to characterize and understand the behavior of soybean plants under different straw covers. Thus, the aim of this study was to characterize, using growth analysis, yield components and agronomic performance of soybean under common bean, Brachiaria brizantha and pearl millet straws. The experiment was performed on a soil under cerrado in the municipality of Santo Antônio de Goiás, GO. The experiment was arranged in a randomized complete block design with three treatments (cover crops) and five replications. Soybean grain yield was lower in the B. brizantha straw treatment (3,708 kg ha-1) than both in the pearl millet (4.772 kg ha-1) and common bean straw treatments (5,200 kg ha-1). The soybean growth analysis in B. brizantha, pearl millet and common bean allowed characterizing the variation in the production of dry matter of leaves, stems, pods and total and leaf area index that provided different grain yields. The cover crop directly affects the soybean grain yield.
Resumo:
Soybean genotypes grown in sub-tropical climate may exhibit lodging. The plant lodging is influenced by soil type and fertility level, sowing date, latitude and altitude of the location, plant population and conditions of crop development. Plant regulators and herbicides are able to avoid or reduce plant lodging. This study aimed to verify the effects of the growth regulators TIBA and daminozide on vegetative growth and yield of soybean cultivar CD 214 RR. The experiment was carried out at a field in randomized block design with four replications in a factorial scheme. The A factor was represented by the combination of regulators TIBA and daminozide and its concentrations, and the Factor B was seven times of evaluation of injury and plant height or eight times of evaluation of lodging. In the range of doses used, the application of daminozide resulted in greater injury to soybean plants than TIBA. The smaller plant height was achieved by the application of 6 g ha-1 of TIBA and 1200 g ha-¹ of daminozide. Treatments with daminozide (100 g ha-¹) and TIBA (10 g ha-1) stood out due to the reduced lodging of soybean plants. Grain weight increased linearly when the levels of TIBA increased. There was a negative correlation between lodging and grain yield and a positive correlation between plant height and lodging. There was also a negative correlation between injury caused by the application of plant regulators and lodging.
Resumo:
Heavy metals can accumulate in soil and cause phytotoxicity in plants with some specific symptoms. The present study evaluated the specific symptoms on rice and soybeans plants caused by excess of heavy metals in soil. Rice and soybean were grown in pots containing soil with different levels of heavy metals. A completely randomized design was used, with four replications, using two crop species and seven sample soils with different contamination levels. Rice and soybean exhibited different responses to the high concentrations of heavy metals in the soil. Rice plants accumulated higher Cu, Mn, Pb and Zn concentrations and were more sensitive to high concentrations of these elements in the soil, absorbing them more easily compared to the soybean plants. However, high available Zn concentrations in the soil caused phytotoxicity symptoms in rice and soybean, mainly chlorosis and inhibited plant growth. Further, high Zn concentrations in the soil reduced the Fe concentration in the shoots of soybean and rice plants to levels considered deficient.
Resumo:
ABSTRACTThis study aimed to evaluate the influence of foliar fertilizer doses containing Mn of phenological stages of suggested application in RR soybeans, to recover management damages with glyphosate at postemergence application on seed vigor in post-harvest and post six months storage. The seeds originated from a field experiment conducted , which included two applications of glyphosate, concomitant with foliar fertilizer in growth stages V4 and V6, with 0.00, 113.50 and 227.00 mg ha-1doses of Mn2+. Germination, GSI (Germination Speed Index), electrical conductivity tests and the first count of seeds were conducted. The application of Mn did not affect the physiological quality of RR soy in postharvest. However, in post-storage, higher doses of Mn had a negative effect on tests of abnormal seedlings, GSI and electrical conductivity. The applications of Mn, regardless of the developmental stage, did not interfere in the germination and first count tests, with and without storage. The electrical conductivity test showed a higher correlation with the seed germination test in the post-harvest treatment.
Resumo:
ABSTRACT Soybean cultivation is increasing rapidly in the region of Alto Vale do Itajaí, State of Santa Catarina, where there is a predominance of silt soils. The objective of this work was to evaluate the content of primary macronutrients in shoots and shoot and root vegetative growth of soybean (Glicine max L. Merrill) grown in a silt-loam soil under different compactation densities and moisture levels. A randomized block design in a 4x4 factorial arrangement was used, with four compactation densities: 1.00; 1.20; 1.40 and 1.60 Mg m-3, and four soil moisture levels: 0.130; 0.160; 0.190 and 0.220 kg kg-1 and four replications. Each pot consisted of the overlapping of three 150-mm PVC rings, where soil was maintained in the higher and lower part of the pot with a density of 1.00 Mg m-3 and in the intermediate ring, the compactation densities were increased. Values of soil density higher than 120 Mg m-3 negatively affected N, P and K uptake by soybean plants, as well as the plant mass of the shoots and roots. The higher levels of soil moisture reduced the compaction effect and promoted better absorption of P and K.
Resumo:
Water covers over 70% of the Earth's surface, and is vital for all known forms of life. But only 3% of the Earth's water is fresh water, and less than 0.3% of all freshwater is in rivers, lakes, reservoirs and the atmosphere. However, rivers and lakes are an important part of fresh surface water, amounting to about 89%. In this Master Thesis dissertation, the focus is on three types of water bodies – rivers, lakes and reservoirs, and their water quality issues in Asian countries. The surface water quality in a region is largely determined both by the natural processes such as climate or geographic conditions, and the anthropogenic influences such as industrial and agricultural activities or land use conversion. The quality of the water can be affected by pollutants discharge from a specific point through a sewer pipe and also by extensive drainage from agriculture/urban areas and within basin. Hence, water pollutant sources can be divided into two categories: Point source pollution and Non-point source (NPS) pollution. Seasonal variations in precipitation and surface run-off have a strong effect on river discharge and the concentration of pollutants in water bodies. For example, in the rainy season, heavy and persistent rain wash off the ground, the runoff flow increases and may contain various kinds of pollutants and, eventually, enters the water bodies. In some cases, especially in confined water bodies, the quality may be positive related with rainfall in the wet season, because this confined type of fresh water systems allows high dilution of pollutants, decreasing their possible impacts. During the dry season, the quality of water is largely related to industrialization and urbanization pollution. The aim of this study is to identify the most common water quality problems in Asian countries and to enumerate and analyze the methodologies used for assessment of water quality conditions of both rivers and confined water bodies (lakes and reservoirs). Based on the evaluation of a sample of 57 papers, dated between 2000 and 2012, it was found that over the past decade, the water quality of rivers, lakes, and reservoirs in developing countries is being degraded. Water pollution and destruction of aquatic ecosystems have caused massive damage to the functions and integrity of water resources. The most widespread NPS in Asian countries and those which have the greatest spatial impacts are urban runoff and agriculture. Locally, mine waste runoff and rice paddy are serious NPS problems. The most relevant point pollution sources are the effluents from factories, sewage treatment plant, and public or household facilities. It was found that the most used methodology was unquestionably the monitoring activity, used in 49 of analyzed studies, accounting for 86%. Sometimes, data from historical databases were used as well. It can be seen that taking samples from the water body and then carry on laboratory work (chemical analyses) is important because it can give an understanding of the water quality. 6 papers (11%) used a method that combined monitoring data and modeling. 6 papers (11%) just applied a model to estimate the quality of water. Modeling is a useful resource when there is limited budget since some models are of free download and use. In particular, several of used models come from the U.S.A, but they have their own purposes and features, meaning that a careful application of the models to other countries and a critical discussion of the results are crucial. 5 papers (9%) focus on a method combining monitoring data and statistical analysis. When there is a huge data matrix, the researchers need an efficient way of interpretation of the information which is provided by statistics. 3 papers (5%) used a method combining monitoring data, statistical analysis and modeling. These different methods are all valuable to evaluate the water quality. It was also found that the evaluation of water quality was made as well by using other types of sampling different than water itself, and they also provide useful information to understand the condition of the water body. These additional monitoring activities are: Air sampling, sediment sampling, phytoplankton sampling and aquatic animal tissues sampling. Despite considerable progress in developing and applying control regulations to point and NPS pollution, the pollution status of rivers, lakes, and reservoirs in Asian countries is not improving. In fact, this reflects the slow pace of investment in new infrastructure for pollution control and growing population pressures. Water laws or regulations and public involvement in enforcement can play a constructive and indispensable role in environmental protection. In the near future, in order to protect water from further contamination, rapid action is highly needed to control the various kinds of effluents in one region. Environmental remediation and treatment of industrial effluent and municipal wastewaters is essential. It is also important to prevent the direct input of agricultural and mine site runoff. Finally, stricter environmental regulation for water quality is required to support protection and management strategies. It would have been possible to get further information based in the 57 sample of papers. For instance, it would have been interesting to compare the level of concentrations of some pollutants in the diferente Asian countries. However the limit of three months duration for this study prevented further work to take place. In spite of this, the study objectives were achieved: the work provided an overview of the most relevant water quality problems in rivers, lakes and reservoirs in Asian countries, and also listed and analyzed the most common methodologies.
Resumo:
This work shows the influence of using different allocation approaches when modelling the inventory analysis in a soybean biodiesel life cycle assessment (LCA). Results obtained using mass, energy and economic based allocations are compared, focusing on the following aspects: normalised potential environmental impact (PEI) categories, total PEI and relative contributions to the total PEI from each life cycle stage and environmental impact category. Similar results are obtained either using economic and energy based allocations. However, different results are obtained when mass based allocation is used when compared with the other two. This study also illustrates that using different allocation approaches in biodiesel LCA may influence the final conclusions, especially in comparative assertions, emphasising the need to perform a sensitivity analysis in the LCA interpretation step.
Resumo:
This paper records for the first time the presence of Corbicula fluminea (Philipi, 1844) in the Brazilian Amazon Basin. This exotic bivalve was found in localities on the Amazonas, Pará and Tocantins rivers. Density and population size structure were measured in some localities. Mean density is between 6.66 and 7.3 individuals m-2. Population size structure and the dates of the first records suggest that the introductions may have occurred between 1997 and 1998. The introductions may have been mediated by ocean-going vessels visiting the ports of Manaus and Belém. The potential impact of the invasion on native freshwater bivalves is discussed along with the need for monitoring and prevention of further introductions of non-indigenous bivalves in Brazil.
Resumo:
Dissertação de mestrado em Ecology
Resumo:
En este proyecto se pretende demostrar que existen alternativas sustentables al monocultivo de soja y económicamente factibles si se consideran los costos ambientales.Se cumplirán los siguientes objetivos específicos:- Caracterizar la sensibilidad de indicadores de calidad del suelo: infiltración, densidad aparente, penetrometría, C orgánico, fracciones de la MO y un índice químico de disponibilidad de N. - Medir escurrimiento y erosión en dos microcuencas con manejos contrastantes donde existe instrumental instalado y registros desde hace mas de 10 años.- Establecer rangos para las situaciones encontradas en los suelos representativos de la región.- Integrar los parámetros considerados en un sistema de diagnóstico de calidad/salud del suelo, para las condiciones de la región. - Aplicar el sistema de Calidad/salud del suelo para situaciones con monocultivo de soja y otras alternativas.- Calibrar y aplicar el modelo de simulación de la materia orgánica AMG, al monocultivo de soja y otras alternativas, a distintas escalas temporales y espaciales.- Estimar los costos ambientales de monocultivo a partir de los datos obtenidos.- Extrapolar los resultados del monocultivo y las otras alternativas a los suelos característicos, para estimar la sustentabilidad de los suelos en el centro-norte de la provincia de Córdoba.Se trabajará en dos áreas piloto en campos de productores, con y sin erosión hídrica. Se evaluarán parámetros indicadores del estado de los suelos, se los integrará en un sistema, se evaluarán los suelos con situaciones de monocultivo de soja y manejos contrastantes y se los correlacionará con su historial de intervención antrópica. Se brindará una herramienta apta para el ordenamiento territorial.
Resumo:
Las poblaciones microbianas juegan un rol fundamental en la estabilidad de los sistemas agrícolas e indican los niveles de salud de un suelo, tanto que pueden ser utilizadas como indicadores de sustentabilidad de un agroecosistema. Los microorganismos reflejan el efecto que tienen las prácticas agrícolas sobre el suelo a través de modificaciones en la abundancia (biodiversidad estructural) y actividades de sus poblaciones (como control biológico de los patógenos, entre otras). Al cuantificarse la biodiversidad microbiana nativa se puede conocer la riqueza de un agroecosistema y utilizarla para el manejo sustentable de hongos patógenos. En este trabajo se evaluará el efecto de la rotación de cultivo (soja-maíz y soja en monocultivo) y los sistemas de labranza (siembra directa y labranzas reducida) sobre la biodiversidad microbiana. Se cuantificarán a partir de suelo: poblaciones de hongos y bacterias totales; agentes potenciales de biocontrol de como Trichoderma spp., Gliocladium spp. y micorrizas vesículo arbusculares (mediante la cuantificación de glomalina), biomasa y respiracion microbiana, y la biodiversidad de comunidades de microorganismos que habitan en el suelo mediante el análisis de perfiles de ácidos grasos (PLFA). Al final del ciclo de cultivo de soja se cuantificará la incidencia de enfermedades causadas por hongos de suelo. Dada la gran abundancia y diversidad de los microorganismos del suelo, las metodologías que se emplearán permitirán obtener información global de la riqueza microbiana de un agro-ecosistema. Se relacionará la biodiversidad microbiana con la incidencia de enfermedades por hongos de suelo, en respuesta a diferentes prácticas de manejo. Esto permitirá aprender a combinar las tecnologías para mejorar los beneficios de la produccion y preservar el agroecosistema en el marco de una agricultura sustentable, y no de una agricultura sostenida por insumos.
Resumo:
La producción de los cultivos está afectada por factores bióticos entre los que se destacan las enfermedades, malezas y plagas, por esto es de importancia el uso de plaguicidas que permitan mantener la producción. Sin embargo, estos productos constituyen un serio riesgo para la salud si no se aplican adecuadamente a fin de no dejar residuos en los granos. La introducción de marcos regulatorios cada vez más estrictos constituyen una barrera para las exportaciones actuales y futuras. El sistema agrícola-industrial argentino no cuenta aún con suficiente información para implementar las medidas adecuadas para prevenir la contaminación de granos con plaguicidas en pre y postcosecha. Se hipotetiza que la residualidad de plaguicidas en granos de soja en la Región Centro de Córdoba está influenciada por factores tanto tecnológicos como ambientales. La evaluación de la importancia relativa de estos factores permite sugerir estrategias de manejo adecuadas para asegurar niveles de residuos por debajo de los límites máximos permitidos. Se plantea como objetivo general identificar los factores tecnológicos (tecnología del cultivo, propiedades fisico-químicas de los plaguicidas, tecnología de aplicación) y sus interacciones, que inciden a campo y en postcosecha sobre el nivel de residuos de insecticidas en granos de soja, en la Región Centro de Córdoba. Como objetivos específicos se pretende cuantificar los residuos que generan las aplicaciones habituales de insecticidas, evaluar la influencia de los diferentes factores tecnológicos y sus interacciones sobre los niveles de residuos y adecuar curvas de disipación de plaguicidas a las condiciones de la región. También aportar conocimientos e información sobre el tema y sugerir prácticas de manejo que reduzcan los niveles de residuos, asegurando la calidad e inocuidad de los alimentos. Para el logro de estos objetivos se realizarán ensayos de evaluación de insecticidas a campo y en postcosecha en la localidad de Manfredi, Provincia de Córdoba, durante dos temporadas agrícolas. Se evaluarán distintas dosis y momentos de aplicación de los insecticidas endosulfán, clorpirifós+cipermetrina y fenitrotión en los ensayos a campo y fenitrotión, esfenvalerato, clorpirifós, deltametrina, DDVP y pirimifós metil en postcosecha. Con endosulfan se realizarán ensayos adecuados para el desarrollo de curvas de disipación. La determinación de residuos de plaguicidas se realizará utilizando determinación de multiresiduos a través cromatografía. Las curvas de disipación para endosulfan se ajustarán a través de modelos no lineales. Los conocimientos e información respecto a la influencia de los factores tecnológicos y sus interacciones sobre el nivel de residuos de plaguicidas en granos de soja, generados como resultados del presente proyecto, serán de utilidad para enriquecer las bases científico-técnicas en el tema y enfrentar el problema de la contaminación de granos con plaguicidas. Identificar la influencia de los factores tecnológicos y sus interacciones permitirá desarrollar prácticas de manejo tendientes a obtener productos con un nivel de residuos por debajo de los límites permitidos. La adecuación de curvas de disipación de plaguicidas a la Región Centro de Córdoba, permitirá efectuar predicciones sobre el contenido de residuos a causa de un tratamiento en un momento dado, conocer la importancia de las distintas variables y la posibilidad de variarlas para disminuir el nivel de residuos en los granos. Es importante profundizar sobre este tema ya que no existe la cantidad de información suficiente para enfrentar el problema de la contaminación por plaguicidas en nuestros sistemas productivos. Esta información es necesaria para poder garantizar la calidad e inocuidad de los alimentos tanto para el comercio interno como externo, asegurando la permanencia de los productos argentinos en los mercados internacionales.
Resumo:
La soja es la especie oleaginosa de mayor importancia y consumo en el mundo. Su cultivo se efectúa en aproximadamente 50 países, aunque el 90 por ciento de la producción está concentrada en: Estados Unidos (40 por ciento), Brasil (24 por ciento), Argentina (18 por ciento) y China (8 por ciento). En nuestro país durante la campaña agrícola 2006/07 se alcanzaron 15.981.264 ha y 47.482.784 t. Actualmente, ocupa una amplia zona ecológica, desde los 23º a los 39º de latitud sur y la región pampeana, con cerca del 90 por ciento de la superficie sembrada en las provincias de Santa Fe (28.5 por ciento), Córdoba (28 por ciento) y Buenos Aires (23 por ciento) es la principal productora. Entre los factores que limitan la producción de este cultivo se encuentra el patosistema begomovirus - mosca blanca (Bemisia tabaci Gennadius), que causa pérdidas económicas, al reducir los rendimientos y calidad de los productos obtenidos y aumentar los costos de producción por el uso intensivo de insecticidas. La continua aplicación de agroquímicos para el control del insecto conlleva la selección de individuos resistentes en la población, que puede verse acelerada si se tiene en cuenta que, durante el ciclo de cultivo, se desarrollan varias generaciones. Además, formas inmaduras y adultos se alojan en el envés de las hojas y la acción de los insecticidas es menos eficaz. Ante esto, los agricultores aumentan el número y frecuencia de las aplicaciones, con lo que se incrementa la presión de selección en las poblaciones, favoreciendo el surgimiento de estirpes resistentes. El control químico resulta antieconómico y genera un severo peligro ambiental, con perjuicios para la salud humana y animal. Por lo tanto, resulta imprescindible la búsqueda de formas alternativas de control de la plaga y de los virus que transmite, a través del manejo integrado sustentable, dentro del cual se destacan la resistencia de la planta hospedante (HPR) y el empleo de métodos culturales. Con respecto a los geminivirus, como primer paso en la búsqueda de resistencia, es de gran importancia identificar las especies y/o razas que se encuentran infectando al cultivo de soja. Además, se presupone la existencia de fuentes de resistencia a moscas blancas en germoplasma de soja y, por ende, a los begomovirus que transmiten y que es posible la caracterización de los mecanismos que confieren dicha resistencia. En base a la problemática expuesta se proponen los siguientes objetivos de trabajo:- Aislar y caracterizar molecularmente a las nuevas especies y/o razas de begomovirus detectadas en cultivos de soja y ajustar las técnicas que permitan su identificación.- Detectar y caracterizar los mecanismos de resistencia, antixenosis, antibiosis o ambas, frente a la mosca blanca B. tabaci en distintos cultivares de soja. Para cumplimentar tales objetivos se efectuará el clonado y secuenciación del genoma completo de los diferentes begomovirus detectados; serán ajustadas técnicas de hibridación molecular con marcado no radioactivo y producidos clones infecciosos que, posteriormente, se emplearán para inocular distintas especies (rango de hospedantes). Por otro lado, se tratará de detectar y caracterizar fuentes de resistencia a B. tabaci en germoplasma de soja (cultivares comerciales y líneas en proceso avanzado de mejoramiento). Como primer paso se efectuará la cría de la mosca blanca bajo condiciones controladas.Se medirán variables indicadoras de antibiosis (en condiciones de no elección o alimentación forzada): número de huevos, ninfas y adultos, tasa de mortalidad, duración del ciclo biológico, longevidad y peso de insectos adultos. Complementariamente se determinará antixenosis (en condiciones de libre elección): índice de atracción y preferencia para la oviposición y su correlación con el número de tricomas foliares. Los resultados del proyecto serán de inmediata transferencia a fitotecnistas, semilleros y sector productivo en general, permitiendo la reducción de pérdidas significativas ocasionadas por begomovirus y por su vector.