Identification of source of heavy metal contamination in a site - a case study

Accidental spills and improper disposal of industrial effluent/sludge containing heavy metals onto the open land or into subsurface result in soil and water contamination. Detailed investigations are carried out to identify the source of contamination of heavy metals in an industrial suburb near Bangalore in India. Detailed investigation of ground water and subsurface soil analysis for various heavy metals has been carried out. Ground water samples were collected in the entire area through the cluster of borewells. Subsurface soil samples were collected from near borewells which were found to contain heavy metals. Water samples and soils samples (after acid digestion) were analysed as per APHO-standard method of analysis. While the results of Zn, Ni and Cd showed that they are within allowable limits in the soil, the ground water and soils in the site have concentration of Cr+6 far exceeding the allowable limits (up to 832 mg/kg). Considering the topography of the area, ground water movement and results of chromium concentration in the borewells and subsurface it was possible to identify the origin, zone of contamination and the migration path of Cr+6. The results indicated that the predominant mechanism of migration of Cr+6 is by diffusion.

Real time monitoring of petroleum leakage detection using etched fiber Bragg grating

Detection of petroleum leakages in pipelines and storage tanks is a very important as it may lead to significant pollution of the environment, accidental hazards, and also it is a very important fuel resource. Petroleum leakage detection sensor based on fiber optics was fabricated by etching the fiber Bragg grating (FBG) to a region where the total internal reflection is affected. The experiment shows that the reflected Bragg's wavelength and intensity goes to zero when etched FBG is in air and recovers Bragg's wavelength and intensity when it is comes in contact with petroleum or any external fluid. This acts as high sensitive, fast response fluid optical switch in liquid level sensing, petroleum leakage detection etc. In this paper we present our results on using this technique in petroleum leakage detection.

Bronze and iron weapons from Luristan

The 30,000 km2 province of Luristan is situated in western Iran and encompasses the upper valleys of the Zagros Mountains. Even today, local tribesmen inhabit Luristan with their settlement patterns similar to ancient times. Several scientific excavations in the Luristan region have uncovered evidence that this particular region was a major attraction for human settlements from the Paleolithic era onwards. In Ancient Iran, the existence of rich mines together with discoveries made by innovative and inventive artisans spurred the growth of the metalworking culture as an art and a skill among early human communities in Ancient Iran. The art of Luristan can be described as the art of nomadic herdsmen and horsemen with an emphasis on the crafting of small, easily portable objects, among these a number of bronze daggers, swords and other weapons. Throughout its history, Luristan was never an ethnic or political entity because Luristan has been occupied by various tribes and races, throughout its history. Next to Elamites, other tribes who inhabited Luristan were the Hurrians, Lullubians, Kutians, and Kassites. As local tribesmen of Luristan were illiterate, information about their history can only be partially reconstructed from the literature of their southern neighbors: the Elamites and Babylonians. Luristan smiths made weapons for both civilizations. The region was later invaded by Assyrians and finally the Iranians settled the area and absorbed the local tribes. Following an accidental find by the local inhabitants in Luristan in 1928 CE, a number of unlawful diggings reveal a number of metal objects made of bronze and iron that showed a high level of craftsmanship. These objects were offered for sale on the art market with fancy names to hide their origin. The subsequent scientific excavations several decades after the initial discovery provided fascinating information about the culture of Luristan. The metalworking art of Luristan spans a time period from the third millennium BC to the Iron Age. The artifacts from Luristan seem to possess many unique and distinctive qualities, and are especially noteworthy for the apparently endless, intricate diversity and detail that they characteristically depict. The bronze artifacts found in or attributed to Luristan can be each be classed under five separate heads: a) arms and armor, including swords, dirks, daggers, axes, mace heads, spearheads, shields, quiver plaques, protective bronze girdles, helmets; b) implements related to horsemanship, including decorative or ornamental objects for horses as well as bits and snaffles; c) items for personal adornment and hygiene, including anklets, bangles, bracelets, finger rings, earrings and tweezers; d) ceremonial and ritual objects, including talismans, idols, pins, anthropomorphic and zoomorphic figurines; and e) utilitarian objects comprising various vessels and tools, including beakers, bowls and jugs. The scope of this article is limited to a discussion of the bronze and iron weapons made in Luristan. The techniques used for making bronze weapons in Luristan included: casting with open molds, casting with close molds, and casting with lost wax process. For metal sheets used for quiver plaques and bronze protective belts, the hammering technique was used. Edged weapons made in Luristan can be classified into: a) daggers, dirks, and swords with tangs; b) daggers, dirks, and swords with flanges; and c) daggers, dirks, and swords with cast-on hilts. Next to bronze, iron was also used for making weapons such as the characteristic weapon from this area, the iron mask sword.

Iberoamérica de reojo en la visión de Tocqueville

Resumen: La democracia en América de Alexis de Tocqueville contiene una teoría de las causas de la república democrática anglosajona en el norte del continente que se entremezcla con la explicación de los factores de la prosperidad norteamericana. A lo largo del libro el autor francés formula una serie de observaciones dispersas sobre los países del Nuevo Mundo colonizados por España y Portugal. El artículo analiza sistemáticamente estas observaciones, de manera de reconstruir la teoría comparativa del desarrollo económico de ambas regiones culturales, en parte esbozada y en parte implícita en este libro de Tocqueville. La revisión del peso relativo de a) las leyes, b) las costumbres y c) lo que Tocqueville llama circunstancias o causas accidentales en el desarrollo de la república democrática y su prosperidad, descubre inconsistencias de interés para quienes desean comprender las causas del atraso material de Iberoamérica respecto de Angloamérica.

La pena de muerte en la Corona de Castilla en la Edad Media

[ES]A lo largo de este artículo se pasan revista a cinco cuentiones que muestran la evolución de la pena de muerte en la Corona de Castilla a lo largo de la Edad Media. En primer lugar, se presta atención al paso de la ejecución privada de la justicia a la pública y en qué casos se mantuvo la venganza, aunque con la autorización judicial. En segundo lugar, se pasa revista a las formas de aplicar la pena de muerte, privilegiando los siguientes tipos: el ahorcamiento por los pies, el asaeteamiento, el empozamiento y el encubamiento. En tercer lugar, se expone el ritual de ejecución de las penas capitales desde que el reo sale de la cárcel y es conducido al cadalso, hasta que el cuerpo es sepultado o queda expuesto a perpetuidad. En cuarto lugar, se reflexiona sobre la incidencia de la rebeldía o contumacia del acusado ante los requerimientos de la justicia en la imposición de la pena de muerte. En quinto y último lugar, se analizan las circunstancias que llevaron a la Corona de Castilla, a partir del último tercio del siglo XV, a relegar la pena de muerte entre el elenco punitivo y preferir castigos que tuvieran utilidad pública.

Magnitude and extent of sediment toxicity in selected estuaries of South Carolina and Georgia

Toxic chemicals can enter the marine environment through numerous routes: stormwater runoff, industrial point source discharges, municipal wastewater discharges, atmospheric deposition, accidental spills, illegal dumping, pesticide applications and agricultural practices. Once they enter a receiving system, toxicants often become bound to suspended particles and increase in density sufficiently to sink to the bottom. Sediments are one of the major repositories of contaminants in aquatic envronments. Furthermore, if they become sufficiently contaminated sediments can act as sources of toxicants to important biota. Sediment quality data are direct indicators of the health of coastal aquatic habitats. Sediment quality investigations conducted by the National Oceanic and Atmospheric Administration (NOAA) and others have indicated that toxic chemicals are found in the sediments and biota of some estuaries in South Carolina and Georgia (NOAA, 1992). This report documents the toxicity of sediments collected within five selected estuaries: Savannah River, Winyah Bay, Charleston Harbor, St. Simons Sound, and Leadenwah Creek (Figure 1). (PDF contains 292 pages)

Researches on essential mechanics issues for submerged floating tunnel

Since 2001, a research group in the Institute of Mechanics, Chinese Academy of Sciences, has been devoted to the research of essential mechanics issues for submerged floating tunnel (SFT). In addition to the structural design of the SFT prototype in Qiandao Lake, the relevant researches cover a number of topics. This paper briefly describes the research procedure and results, including dynamic response of SFT due to surface wave, vortex-induced vibration of anchoring system, structural analysis of curved SFT, temperature effects of curved SFT, structural dynamic response due to accidental load, and effects of structural parameters (buoyancy-weight ratio, tunnel length，tether stiffness，etc.) on dynamic response.

Baryon and lepton numbers in particle physics beyond the standard model

The works presented in this thesis explore a variety of extensions of the standard model of particle physics which are motivated by baryon number (B) and lepton number (L), or some combination thereof. In the standard model, both baryon number and lepton number are accidental global symmetries violated only by non-perturbative weak effects, though the combination B-L is exactly conserved. Although there is currently no evidence for considering these symmetries as fundamental, there are strong phenomenological bounds restricting the existence of new physics violating B or L. In particular, there are strict limits on the lifetime of the proton whose decay would violate baryon number by one unit and lepton number by an odd number of units.

The first paper included in this thesis explores some of the simplest possible extensions of the standard model in which baryon number is violated, but the proton does not decay as a result. The second paper extends this analysis to explore models in which baryon number is conserved, but lepton flavor violation is present. Special attention is given to the processes of μ to e conversion and μ → eγ which are bound by existing experimental limits and relevant to future experiments.

The final two papers explore extensions of the minimal supersymmetric standard model (MSSM) in which both baryon number and lepton number, or the combination B-L, are elevated to the status of being spontaneously broken local symmetries. These models have a rich phenomenology including new collider signatures, stable dark matter candidates, and alternatives to the discrete R-parity symmetry usually built into the MSSM in order to protect against baryon and lepton number violating processes.

A retrofitting framework for pre-Northridge steel moment-frame buildings

In the 1994 M_w 6.7 Northridge and 1995 M_w 6.9 Kobe earthquakes, steel moment-frame buildings were exposed to an unexpected flaw. The commonly utilized welded unreinforced flange, bolted web connections were observed to experience brittle fractures in a number of buildings, even at low levels of seismic demand. A majority of these buildings have not been retrofitted and may be susceptible to structural collapse in a major earthquake.

This dissertation presents a case study of retrofitting a 20-story pre-Northridge steel moment-frame building. Twelve retrofit schemes are developed that present some range in degree of intervention. Three retrofitting techniques are considered: upgrading the brittle beam-to-column moment resisting connections, and implementing either conventional or buckling-restrained brace elements within the existing moment-frame bays. The retrofit schemes include some that are designed to the basic safety objective of ASCE-41 Seismic Rehabilitation of Existing Buildings.

Detailed finite element models of the base line building and the retrofit schemes are constructed. The models include considerations of brittle beam-to-column moment resisting connection fractures, column splice fractures, column baseplate fractures, accidental contributions from ``simple'' non-moment resisting beam-to-column connections to the lateral force-resisting system, and composite actions of beams with the overlying floor system. In addition, foundation interaction is included through nonlinear translational springs underneath basement columns.

To investigate the effectiveness of the retrofit schemes, the building models are analyzed under ground motions from three large magnitude simulated earthquakes that cause intense shaking in the greater Los Angeles metropolitan area, and under recorded ground motions from actual earthquakes. It is found that retrofit schemes that convert the existing moment-frames into braced-frames by implementing either conventional or buckling-restrained braces are effective in limiting structural damage and mitigating structural collapse. In the three simulated earthquakes, a 20% chance of simulated collapse is realized at PGV of around 0.6 m/s for the base line model, but at PGV of around 1.8 m/s for some of the retrofit schemes. However, conventional braces are observed to deteriorate rapidly. Hence, if a braced-frame that employs conventional braces survives a large earthquake, it is questionable how much service the braces provide in potential aftershocks.

Balance de la política fiscal desarrollada en España en época de crisis. ¿Por qué elegir el camino contractivo?

The use of a contractive fiscal policy in times of crisis and austerity can lead to so many different opinion streams which can be, at the same time, very opposite with each other. The high budget deficit in some economies has forced the eurozone to implement austerity policies, meaning that the debate is now more alive than ever. Therefore, the aim of this paper is to analyze the effects of the implementation of a contractive policy during a crisis considering the case of Spain. The positive effects in financial markets were noticed due to the decrease of the risk premium and the payment of interests, and also thanks to the increase of trust towards Spain. This way, the reduction of the Spanish deficit was remarkable but in any case there is still a long path until reaching the limit of 3% of the GDP. Also, in the short run it is possible to see that the consolidation had contractive effects in the economic activity but, in the long run, the debate is among the defenders of the fact that austerity is followed by a growing period and the ones opposing to it due to the drowning effect produced by it.

Genetic engineering of microorganisms: free release into the environment

Genetic engineering now makes possible the insertion of DNA from many organisms into other prokaryotic, eukaryotic and viral hosts. This technology has been used to construct a variety of such genetically engineered microorganisms (GEMs). The possibility of accidental or deliberate release of GEMs into the natural environment has recently raised much public concern. The prospect of deliberate release of these microorganisms has prompted an increased need to understand the processes of survival, expression, transfer and rearrangement of recombinant DNA molecules in microbial communities. The methodology which is being developed to investigate these processes will greatly enhance our ability to study microbial population ecology.