Femtosecond light distribution at skin and liver of rats: analysis for use in optical diagnostics

In this study we investigated the light distribution under femtosecond laser illumination and its correlation with the collected diffuse scattering at the surface of ex-vivo rat skin and liver. The reduced scattering coefficients mu`s for liver and skin due to different scatterers have been determined with Mie-scattering theory for each wavelength (800, 630, and 490 nm). Absorption coefficients mu(a) were determined by diffusion approximation equation in correlation with measured diffused reflectance experimentally for each wavelength (800, 630, and 490 nm). The total attenuation coefficient for each wavelength and type of tissue were determined by linearly fitting the log based normalized intensity. Both tissues are strongly scattering thick tissues. Our results may be relevant when considering the use of femtosecond laser illumination as an optical diagnostic tool. [GRAPHICS] A typical sample of skin exposed to 630 nm laser light (C) 2010 by Astro Ltd. Published exclusively by WILEY-VCH Verlag GmbH & Co. KGaA

Evaluation of dental pulp repair using low level laser therapy (688 nm and 785 nm) morphologic study in capuchin monkeys

The aim of this study was to evaluate the hypothesis that low-level laser therapy (LLLT) 688 nm and 785 nm accelerate dentin barrier formation and repair process after traumatic pulp exposure. The sample consisted of 45 premolars of capuchin monkeys (Cebus apella) with pulp exposure Class V cavities. All premolars were treated with calcium hydroxide (Ca(OH)(2)), divided in groups of 15 teeth each, and analyzed on 7(th), 25(th), and 60(th) day. Group GI - only Ca(OH)(2), GIF- laser 688 nm, and GIII - laser 785 nm. Laser beam was used in single and punctual dose with the parameters: continuous, 688 nm and 785 nm wavelength, tip`s area of 0.00785 cm(2), power 50 mW, application time 20 s, dose 255 J/cm(2), energy 2 J. Teeth were capped with Ca(OH)(2), Ca(OH)(2) cement and restored with amalgam. All groups presented pulp repair. On 25(th) day the thickness of the formed dentin barrier was different between the groups GI and GII (p < 0.05) and between groups GI and GIII (p < 0.01). On 60(th) day there was difference between GI and GIII (p < 0.01). It may be concluded that, LLLT 688 nm and 785 nm accelerated dentin barrier formation and consequently pulp repair process, with best results using infrared laser 785 nm. (c) 2009 by Astro Ltd. Published exclusively by WLLEY-VCH Verlag GmbH & Co. KGaA

A characterisation of the Hoffman-Wohlgemuth surfaces in terms of their symmetries

For an embedded singly periodic minimal surface (M) over tilde with genus rho >= 4 and annular ends, some weak symmetry hypotheses imply its congruence with one of the Hoffman-Wohlgemuth examples. We give a very geometrical proof of this fact, along which they come out many valuable clues for the understanding of these surfaces.

Relação entre a cultura organizacional e os indicadores de desempenho econômico, ambiental, e social de sustentabilidade do triple bottom line (3BL): um estudo nas companhias de energia elétrica

Tese apresentada ao Programa de Pós-Graduação em Administração da Universidade Municipal de São Caetano do Sul para obtenção do título de Doutora em Administração

O método de Perron : aplicações e extensões

Nesta dissertação apresentamos e desenvolvemos o Método de Perron, fazendo uma aplicação ao ploblema de Dirichlet para a equação das superfícies de curvatura média constante em R3. Apresentamos também uma extensão deste método dentro de EDP's e, por fim, obtemos uma extensão geométrica que se aplica a superfícies ao invés de gráficos. Comentamos a aplicação deste método geométrico á existência de superfícies mínimas tendo como bordo duas curvas convexas em planos paralelos do R3.

Detecção de cinco novas mutações em pacientes brasileiros com gangliosidose GM1

A Gangliosidose GM1 é um Erro Inato do Metabolismo (EIM) causado pela deficiência da enzima B-galactosidase ácida. Essa doença é caracterizada pelo acúmulo de metabólitos não degradados, principalmente gangliosídeo GM1, nos lisossomos de vários tipos celulares. Baseado na idade de início e na atividade residual da enzima, a Gangliosidose GM1 é classificada em três diferentes tipos: infantil, juvenil e adulto. O gene da B-galactosidase ácida (GLB1, GeneBank M27507) está situado no cromossomo 3 e possui mais de 60 kb, contendo 16 exons. Cerca de 50 mutações associadas à doença estão descritas na literatura. No sul do Brasil, há uma alta freqüência dessa doença (1:17.000 nascidos vivos). Neste trabalho, vinte pacientes diagnosticados no Hospital de Clínicas de Porto Alegre (Brasil) tiveram o gene GLB1 investigado por SSCP (Single Strand Conformational Polymorphism) usando DNA extraído de sangue periférico. Através desta triagem foram encontradas 52 alterações de mobilidade do DNA, indicando a presença de mutações. As amostras relativas aos exons 2 e 15 foram submetidas a sequenciamento direto com seqüenciador ABI31O(Applied Biosystens) utilizado kit BigDye 3.1. Cinco novas mutações no gene GLB1 (F63Y, R38G, Y36S, Y64F e R59C) e duas mutações já descritas (R59H e 1622-1627insG) foram encontradas. Este trabalho possibilitou a genotipagem completa de 6 pacientes e parcial de 5, e direcionou a investigação de mutações, contribuindo diretamente no diagnóstico da enfermidade e permitindo a realização de estudos de correlação genótipo/fenótipo destes pacientes.

Na primeira rodada da Copa, Neymar foi (quase) absoluto no Twitter

A primeira fase da Copa do Mundo no Brasil encerrou-se na última quinta-feira (26), tendo atraído grande atenção internacional. Até ontem, foram registradas cerca de 17 milhões de menções relacionadas ao torneio no Twitter no mundo inteiro, com média de mais de 1 milhão de "tuítes" por dia. Os principais destaques até o momento foram Neymar, astro da Seleção Brasileira e um dos artilheiros do Mundial com quatro gols, e Luis Suárez, artilheiro uruguaio que praticamente monopolizou as redes desde a terça-feira (25), após morder o italiano Giorgio Chiellini em partida válida pela terceira rodada da primeira fase.

Na primeira rodada da Copa, Neymar foi (quase) absoluto no Twitter

A primeira fase da Copa do Mundo no Brasil encerrou-se na última quinta-feira (26), tendo atraído grande atenção internacional. Até ontem, foram registradas cerca de 17 milhões de menções relacionadas ao torneio no Twitter no mundo inteiro, com média de mais de 1 milhão de "tuítes" por dia. Os principais destaques até o momento foram Neymar, astro da Seleção Brasileira e um dos artilheiros do Mundial com quatro gols, e Luis Suárez, artilheiro uruguaio que praticamente monopolizou as redes desde a terça-feira (25), após morder o italiano Giorgio Chiellini em partida válida pela terceira rodada da primeira fase. Os números são do Mundial na Rede, ferramenta da Diretoria de Análise de Políticas Públicas da Fundação Getulio Vargas em parceria com a empresa britânica Brandwatch, que monitora menções à Copa do Mundo no Twitter. A ferramenta, que pode ser acessada no site da FGV/DAPP, monitora os "tuítes" em inglês no mundo inteiro e também em português, oferecendo insights em tempo real sobre cada um dos países participantes do Mundial.

Luto, admiração e política no tributo das redes sociais a David Bowie

A notícia da morte do músico inglês David Bowie, em 10 de janeiro, repercutiu internacionalmente em homenagens e lamentos. As redes sociais transformaram-se, na manhã de segunda-feira, 11 de janeiro, em um espaço online de culto ao celebrado artista, vítima de câncer aos 69 anos, e ao longo da semana o adeus a Bowie se manteve pulsante no mundo inteiro. No Twitter, os tributos ao astro emanaram de diversos países, desde colegas artistas até líderes políticos, numa comprovação de que sua criação artística e influência perpassaram diferentes gerações e culturas. Afinal, Bowie foi capaz de fundir distintas tendências e elementos sonoros, comportamentais e visuais em um sincretismo sensível continuamente inovador.

Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Síntese, estudo cinético e análise microestrutural do sistema cério-níquel obtido pelo método pechini

The cerium oxide has a high potential for use in removing pollutants after combustion, removal of organic matter in waste water and the fuel-cell technology. The nickel oxide is an attractive material due to its excellent chemical stability and their optical properties, electrical and magnetic. In this work, CeO2-NiO- systems on molars reasons 1:1(I), 1:2(II) e 1:3(III) metal-citric acid were synthesized using the Pechini method. We used techniques of TG / DTG and ATD to monitor the degradation process of organic matter to the formation of the oxide. By thermogravimetric analysis and applying the dynamic method proposed by Coats-Redfern, it was possible to study the reactions of thermal decomposition in order to propose the possible mechanism by which the reaction takes place, as well as the determination of kinetic parameters as activation energy, Ea, pre-exponential factor and parameters of activation. It was observed that both variables exert a significant influence on the formation of complex polymeric precursor. The model that best fitted the experimental data in the dynamic mode was R3, which consists of nuclear growth, which formed the nuclei grow to a continuous reaction interface, it proposes a spherical symmetry (order 2 / 3). The values of enthalpy of activation of the system showed that the reaction in the state of transition is exothermic. The variables of composition, together with the variable temperature of calcination were studied by different techniques such as XRD, IV and SEM. Also a study was conducted microstructure by the Rietveld method, the calculation routine was developed to run the package program FullProf Suite, and analyzed by pseudo-Voigt function. It was found that the molar ratio of variable metal-citric acid in the system CeO2-NiO (I), (II), (III) has strong influence on the microstructural properties, size of crystallites and microstrain network, and can be used to control these properties

Herança da resistência ao enfezamento em milho

Os objetivos deste trabalho foram determinar a herança da resistência ao complexo de enfezamento em milho e determinar as melhores fontes de resistência entre as linhagens estudadas. Foram realizadas as análises dialélica e médias de gerações em linhagens de milho. Para a análise dialélica, foram cruzadas 12 linhagens de milho, em dialélico parcial. Para análises de médias de gerações, foram cruzadas três linhagens resistentes e quatro suscetíveis, para a obtenção das gerações F1, F2, RCP R e RCP S. Os trabalhos foram conduzidos em Jaboticabal, SP. A incidência de enfezamento foi avaliada no estádio fenológico R3. Efeitos significativos quanto à capacidade geral de combinação e capacidade específica de combinação foram obtidos, o que indicou que, no controle do caráter enfezamentos, estão envolvidos tanto os efeitos aditivos quanto os de dominância. Análises de médias de gerações mostraram a presença de poucos genes envolvidos com o controle da resistência, com predominância de efeitos aditivos, o que permite a seleção de genótipos resistentes. As linhagens L02, L03 e L05 poderão ser utilizadas como fontes de resistência, em futuras combinações híbridas.

Relative potency of ketamine and S(+)-ketamine in dogs

The aim of this study was to determine the relative potency of racemic ketamine and S(+)-ketamine for the hypnotic effect and to evaluate the clinical anesthesia produced by equianesthetic doses of these two substances in dogs. One hundred and eight dogs were allocated in groups R2, R2.5, R3, R6, R9, R12, S2, S2.5, S3, S6, S9, and S12, to receive by intravenous route 2, 2.5, 3, 6, 9, and 12 mg/kg of ketamine or S(+)-ketamine, respectively. A dose-effect curve was drawn with the dose logarithm and the percentage of dogs that presented hypnosis in each group. The curve was used to obtain a linear regression, to determine the effective doses 100 and the potency relationship. In another experimental phase, eight groups of five dogs received 3, 6, 9 and 12 mg/kg of ketamine or S(+)-ketamine to evaluate the periods of latency, hypnosis, and total recovery. The times in which the dogs reached the sternal position, attempted to stand up for the first time, recovered the standing position, and started to walk were also recorded. The hypnotic dose for ketamine was 9.82 +/- 3.02 (6.86-16.5) mg/kg and for S(+)-ketamine was 7.76 +/- 2.17 (5.86-11.5) mg/kg. The time of hypnosis was longer in R3 and the first attempt to stand up occurred early in R6 when compared with S3 and S6 respectively. When R9 (100% of hypnosis with ketamine) and S6 [100% of hypnosis with S(+)-ketamine] were compared (1:1.5 ratio), the time to sternal position (12 +/- 2.5 and 20.2 +/- 5.6 min respectively) and the total recovery time (45 +/- 5.5 and 60.2 +/- 5.2 min respectively) were significantly shorter with S(+)-ketamine. It was concluded that the potency ratio between ketamine and S(+)-ketamine in dogs is smaller than the one reported in other species, and that the dose obtained after a reduction of 50%, as usually performed in humans, would not be enough to obtain equianesthetic effects in dogs.

Análise topológica experimental por perfilometria cíclica indutiva de superficies de paredes estruturais

To enhance the maintenance practices, Oil and Gas Pipelines are inspected from the inside by automated systems called PIG (Pipeline Inspection Gauge). The inspection and mapping of defects, as dents and holes, in the internal wall of these pipelines are increasingly put into service toward an overall Structural Integrity Policy. The residual life of these structures must be determined such that minimize its probability of failure. For this reason, the investigation on the detection limits of some basic topological features constituted by peaks or valleys disposed along a smooth surface is of great value for determining the sensitivity of the measurements of defects from some combinations of circumferential, axial and radial extent. In this investigation, it was analyzed an inductive profilometric sensor to scan three races, radius r1, r2, r3, in a circular surface of low carbon steel, equipped with eight consecutive defects simulated by bulges and holes by orbit, equally spaced at p/4 rad. A test rig and a methodology for testing in laboratory were developed to evaluate the sensor response and identify their dead zones and jumps due to fluctuations as a function of topological features and scanning velocity, four speeds different. The results are presented, analyzed and suggestions are made toward a new conception of sensor topologies, more sensible to detect these type of damage morphologies

Um hipermídia sobre fases da lua para o ensino de astronomia a distância

The interdisciplinary nature of Astronomy makes it a field of great potential to explore various scientific concepts. However, studies show a great lack of understanding of fundamental subjects, including models that explain phenomena that mark everyday life, like the phases of the moon. Particularly in the context of distance education, learning of such models can be favored by the use of technologies of information and communication. Among other possibilities, we highlight the importance of digital materials that motivate and expand the forms of representation available about phenomena and models. It is also important, however, that these materials promote the explicitation of student's conceptions, as well as interaction with the most central aspects of the astronomical model for the phenomenon. In this dissertation we present a hypermedia module aimed at learning about the phases of the moon, drawn from an investigation on the difficulties with the subject during an Astronomy course for teaching training at undergraduate level at UFRN. The tests of three semesters of course were analyzed, taking into account also the alternative conceptions reported in the literature in astronomy education. The product makes use of small texts, questions, images and interactive animations. Emphasizes questions about the illumination of the Moon and other bodies, and their relationship to the sun, the perception from different angles of objects illuminated by a single source, the cause of the alternation between day and night, the identification of Moon's orbit around the Earth and the occurrence of the phases as a result of the position of observing it, and the perception of time involved in the phenomenon. The module incorporated considerations obtained from interviews with students in two poles where its given presential support for students of the course, and subjects from different pedagogical contexts. The final form of the material was used in a real situation of learning, as supplementary material for the final test of the discipline. The material was analyzed by 7 students and 4 tutors, among 56 users, in the period in question. Most students considered that the so called "Lunar Module" made a difference in their learning, the animations were considered the most prominent aspect, the images were indicated as stimulating and enlightening, and the text informative and enjoyable. The analysis of learning of these students, observing their responses to issues raised at the last evaluation, suggested gains in key aspects relating to the understanding of the phases, but also indicates more persistent difficulties. The work leads us to conclude that it is important to seek contributions for the training of science teachers making use of new technologies, with attention to the treatment of computer as a complementary resource. The interviews that preceded the use of the module, and the way student has sought the module if with questions and/or previous conflicts - established great difference in the effective contribution of the material, indicating that it should be used with the mediation of teacher or tutor, or via strategies that cause interactions between students. It is desirable that these interactions are associated with the recovery of memories of the subjects about previous observations and models, as well as the stimulus to new observations of phenomena