Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C

Cylindrical specimens of textured commercial pure alpha-titanium plate, cut with the cylinder axis along the rolling direction for one set of experiments and in the long transverse direction for the other set, were compressed at strain rates in the range of 0.001 to 100 s-1 and temperatures in the range of 25-degrees-C to 400-degrees-C. At strain rates greater-than-or-equal-to 1 s-1, both sets of specimens exhibited adiabatic shear bands, but the intensity of shear bands was found to be higher in the rolling direction specimens than in the long transverse direction specimens. At strain rates -0.1 s-1, the material deformed in a microstructurally inhomogeneous fashion. For the rolling direction specimens, cracking was observed at 100-degrees-C and at strain rates -0.1 s-1. This is attributed to dynamic strain aging. Such cracking was not observed in the long transverse specimens. The differences in the intensity of adiabatic shear bands and that of dynamic strain aging between the two sets of test specimens are attributed to the strong crystallographic texture present in these plates.

Electrochemical Determination of L-Dopa in Mucuna pruriens Seeds, Leaves and Commercial Siddha Product Using Gold Modified Pencil Graphite Electrode

In the present work a gold modified pencil graphite electrode (GPGE) was used for the determination of L-dopa present in the aqueous extracts of Mucuna pruriens seeds (MPS), Mucuna pruriens leaves (MPL) and Commercial Siddha Product (CSP). The GPGE shows excellent electrocatalytic activity towards the oxidation of both L-dopa and ascorbic acid (AA), with the separation of peak potential of 98 mV. The differential pulse voltammetric (DPV) results indicated that the detection limit for L-dopa was 1.54 mu M (S/N=3). This method can be successfully applied for the determination of L-dopa in real samples.

Synthesis and Microstructure of Laser Surface Alloyed Al–Sn–Si Layer on Commercial Aluminum Substrate

A new type of bearing alloy containing ultrafine sized tin and silicon dispersions in aluminum was designed using laser surface alloying and laser remelting techniques. The microstructures of these non-equilibrium processed alloys were studied in detail using scanning and transmission electron microscopy. The microstructures revealed three distinct morphologies of tin particles namely elongated particles co-existing with silicon, globular particles, and very fine particles. Our detailed analyses using cellular growth theories showed that the formation of these globular tin particles was due to the pinching off of the tin rich liquid in the inter-cellular space by the growth of aluminum secondary dendrite arms. Evidence of fine recrystallized aluminum grains at the top layer due to constrained solidification was shown. Thermal analyses suggested that melting of the spherical shaped tin particles was controlled by the binary aluminum-tin eutectic reaction, whereas non-spherical tin particles melted via the tin-silicon eutectic reaction.

Expediency of Penetration Ratio and Evaluation of Mean Throughput for Safety and Commercial Applications in VANETs

Vehicular ad hoc network (VANET) applications are principally categorized into safety and commercial applications. Efficient traffic management for routing an emergency vehicle is of paramount importance in safety applications of VANETs. In the first case, a typical example of a high dense urban scenario is considered to demonstrate the role of penetration ratio for achieving reduced travel time between source and destination points. The major requirement for testing these VANET applications is a realistic simulation approach which would justify the results prior to actual deployment. A Traffic Simulator coupled with a Network Simulator using a feedback loop feature is apt for realistic simulation of VANETs. Thus, in this paper, we develop the safety application using traffic control interface (TraCI), which couples SUMO (traffic simulator) and NS2 (network simulator). Likewise, the mean throughput is one of the necessary performance measures for commercial applications of VANETs. In the next case, commercial applications have been considered wherein the data is transferred amongst vehicles (V2V) and between roadside infrastructure and vehicles (I2V), for which the throughput is assessed.

Rapid determination of main constituents of packed juices by reverse phase-high performance liquid chromatography: an insight in to commercial fruit drinks

The present work reports the compositional analysis of thirteen different packed fruit juices using high performance liquid chromatography (HPLC). Vitamin C, organic acids (citric and malic) and sugars (fructose, glucose and sucrose) were separated, analyzed and quantified using different reverse phase methods. A new rapid reverse phase HPLC method was developed for routine analysis of vitamin C in fruit juices. The precision results of the methods showed that the relative standard deviations of the repeatability and reproducibility were < 0.05 and < 0.1 respectively. Correlation coefficient of the calibration models developed was found to be higher than 0.99 in each case. It has been found that the content of Vitamin C was less variable amongst different varieties involved in the study. It is also observed that in comparison to fresh juices, the packed juices contain lesser amounts of vitamin C. Citric acid was found as the major organic acids present in packed juices while maximum portion of sugars was of sucrose. Comparison of the amount of vitamin C, organic acids and sugars in same fruit juice of different commercial brands is also reported.

Evaluation of Several Commercial Algicides for Control of Odor-producing Cyanobacteria

The production of certain odorous metabolites is an undesirable attribute of cyanobacteria (blue-green algae) growth in aquaculture ponds [e.g., channel catfish(Ictalurus punctatus)] and in drinking water reservoirs. The most common odorous compounds encountered in catfish aquaculture are geosmin (trans-1,10-dimethyltrans-9-decalol) and 2-methylisoborneol(exo-1,2,7,7-tetramethylbicyclo[2.2.1]heptan-2-ol). These compounds are also frequently encountered worldwide in reservoirs and aqueducts used for municipal drinking water systems(Schrader et al. 2002). In this study, several algicides were evaluated using a rapid bioassay to determine their effectiveness in controlling the MIB-producing cyanobacterium Oscillatoria perornata from a west Mississippi catfish pond and the MIBproducing Pseudanabaena sp. (strain LW397) from Lake Whitehurst, Virginia, used as a city water supply reservoir. The cyanobacterium Oscillatoria agardhii , not a MIB-producer, and the green alga Selenastrum capricornutum , found in catfish ponds in the southeastern United States, were included in the bioassay to help determine potential broad-spectrum toxicity of the commercial products. (PDF has 3 pages.)

Association analyses of DNA polymorphisms in bovine SREBP-1, LXRα,FADS1 genes with fatty acid composition in Canadian commercial crossbred beef steers

Two previously reported DNA polymorphisms of sterol regulatory element binding transcription factor 1 (SREBP1) and liver X receptor alpha (LXRα) and two DNA polymorphisms of fatty acid desaturase 1 (FADS1) were evaluated for associations with fatty acids in brisket adipose tissue of Canadian cross-bred beef steers. The polymorphism of 84 bp insert/deletion in intron 5 of SREBP1 was significantly associated with the concentration of 9c C17:1 (P=0.013). The G>A single nucleotide polymorphism (SNP) in the exon 4 of LXRα gene was associated with the concentration of 9c, 11t C18:2 (P=0.04), sum of conjugated linoleic acids (CLA) (P=0.025) and 11c C20:1(P=0.042). Two DNA polymorphisms in the promoter region of FADS1, deletion/insertion of ->GTG in rs133053720 and SNP A>G in rs42187276, were significantly associated with concentrations of C17:0 iso, C17:0 ai, total branched chain fatty acids (BFA), 12t C18:1, 13t/14t C18:1, 15t C18:1, and 13c C18:1 (P<0.05). Further studies are needed to validate the associations and to delineate the roles of the gene polymorphisms in determining the fatty acid composition in beef tissues.

Biology and Fishery of Florida's commercial sponges

(PDF has 2 pages.)

Effects of commercial fishing regulations on stranding rates of bottlenose dolphin (Tursiops truncatus).

Fisheries management actions taken to protect one species can have unintended, and sometimes positive, consequences on other species. For example, regulatory measures to reduce fishing effort in the winter gillnet fishery for spiny dogfish (Squalus acanthias) off North Carolina (NC) also led to decreases in the number of bycaught bottlenose dolphins (Tursiops truncatus). This study found that a marked decrease in fishing effort for spiny dogfish in NC also corresponded with a marked decrease in winter stranding rates of bottlenose dolphins with entanglement lesions (P= 0.002). Furthermore, from 1997 through 2002, there was a significant positive correlation (r2 = 0.79; P= 0.0003) between seasonal bycatch estimates of bottlenose dolphins in gill nets and rates of stranded dolphins with entanglement lesions. With this information, stranding thresholds were developed that would enable the detection of those increases in bycatch in near real-time. This approach is valuable because updated bycatch estimates from observer data usually have a time-lag of two or more years. Threshold values could be used to detect increases in stranding rates, triggering managers immediately to direct observer effort to areas of potentially high bycatch or to institute mitigation measures. Thus, observer coverage and stranding investigations can be used in concert for more effective fishery management.

Improvements to Data Collection in Commercial Fisheries Using Electronic Reporting Methods: Cost/Efficiency and Implications for Use in Ecosystem Management.

Data have been collected on fisheries catch and effort trends since the latter half of the 1800s. With current trends in declining stocks and stricter management regimes, data need to be collected and analyzed over shorter periods and at finer spatial resolution than in the past. New methods of electronic reporting may reduce the lag time in data collection and provide more accurate spatial resolution. In this study I evaluated the differences between fish dealer and vessel reporting systems for federal fisheries in the US New England and Mid-Atlantic areas. Using data on landing date, report date, gear used, port landed, number of hauls, number of fish sampled and species quotas from available catch and effort records I compared dealer and vessel electronically collected data against paper collected dealer and vessel data to determine if electronically collected data are timelier and more accurate. To determine if vessel or dealer electronic reporting is more useful for management, I determined differences in timeliness and accuracy between vessel and dealer electronic reports. I also compared the cost and efficiency of these new methods with less technology intensive reporting methods using available cost data and surveys of seafood dealers for cost information. Using this information I identified potentially unnecessary duplication of effort and identified applications in ecosystem-based fisheries management. This information can be used to guide the decisions of fisheries managers in the United States and other countries that are attempting to identify appropriate fisheries reporting methods for the management regimes under consideration. (PDF contains 370 pages)