Some Aspects of the Kobayashi and Carath,odory Metrics on Pseudoconvex Domains

The purpose of this article is to consider two themes, both of which emanate from and involve the Kobayashi and the Carath,odory metric. First, we study the biholomorphic invariant introduced by B. Fridman on strongly pseudoconvex domains, on weakly pseudoconvex domains of finite type in C (2), and on convex finite type domains in C (n) using the scaling method. Applications include an alternate proof of the Wong-Rosay theorem, a characterization of analytic polyhedra with noncompact automorphism group when the orbit accumulates at a singular boundary point, and a description of the Kobayashi balls on weakly pseudoconvex domains of finite type in C (2) and convex finite type domains in C (n) in terms of Euclidean parameters. Second, a version of Vitushkin's theorem about the uniform extendability of a compact subgroup of automorphisms of a real analytic strongly pseudoconvex domain is proved for C (1)-isometries of the Kobayashi and Carath,odory metrics on a smoothly bounded strongly pseudoconvex domain.

Photo induced Effects on the Optical Properties of Sb40Se20S40 Thin Film

The thermally evaporated amorphous Sb40Se20S40 thin film of 800 nm thickness was subjected to light exposure for photo induced studies. The as-prepared and illuminated thin films were studied by X-ray diffraction, Fourier Transform Infrared Spectroscopy and X-ray Photoelectron Spectroscopy. The optical band gap was reduced due to photo induced effects along with the increase in disorder. These optical properties changes are due to the change of homopolar bond densities. The core level peak shifting in XPS spectra supports the optical changes happening in the film due to light exposure.

Effect of Mg addition on microstructural, mechanical and environmental properties of Nb-Si eutectic composite

The paper reports the effect of addition of small amount of Mg on the mechanical and oxidation properties of Nb-Nb3Si eutectic composites in Nb-Si system under the condition of suction casting. Mg addition increases the volume fraction of primary dendrites of Nb solid solution. This phase contains significant amount of strengthening precipitates. Two different precipitates are identified. The large plate shaped precipitates are that of hcp phase, while fine coherent precipitates have the structure similar to recently identified delta-Nb11Si2 phase. The Mg addition improves both the strength and ductility of the composite at room temperature (similar to 1.4 GPa and similar to 5% engineering strain) as well as at 700 degrees C(similar to 1.2 GPa and similar to 7% engineering strain). The presence of Mg results in a complex barrier layer which significantly increases the oxidation resistance up to a temperature of at least 1000 degrees C. (C) 2012 Elsevier B.V. All rights reserved.

Microstructure and tensile properties of consolidated magnesium chips

In this study tensile properties of consolidated magnesium chips obtained from solid state re-cycling (SSR) has been examined and correlated with the microstructure. Chips machined from as-cast billet of pure magnesium were consolidated through SSR technique, comprising of compaction at ambient conditions followed by hot extrusion at four different temperatures viz., 250, 300, 350 and 400 degrees C. The extruded rods were characterized for microstructure and their room temperature tensile properties. Both ultimate tensile strength and 0.2% proof stress of these consolidated materials are higher by 15-35% compared to reference material (as cast and extruded). Further these materials obey Hall-Petch relation with respect to strength dependence of grain size. Strain hardening behavior, measured in terms of hardening exponent, hardening capacity and hardening rate was found to be distinctly different in chip consolidated material compared to reference material. Strength asymmetry, measured as a ratio of compressive proof stress to tensile proof stress was higher in chip consolidated material. (C) 2012 Elsevier B.V. All rights reserved.

Gibbs energy of formation of Ca7V4O17

Thermodynamic properties of Ca7V4O17 are measured for the first time using a solid-state electrochemical cell incorporating single crystal of CaF2 as the electrolyte over the temperature range from (900 to 1175) K. An equimolar mixture of CaO and CaF2 is used as the reference electrode and a mixture of Ca3V2O8, Ca7V4O17 and CaF2 as the measuring electrode. Both the electrodes are placed under flowing oxygen gas at ambient pressure. The standard Gibbs energy change for the reaction: 2Ca(3)V(2)O(8) + CaO -> Ca7V4O17; which is related to the chemical potential of CaO in the two-phase region (Ca3V2O8 + Ca7V4O17) of the pseudo-binary system CaO + V2O5, is obtained from the electromotive force of the cell as: Delta(r)G(o) +/- 127/(J . mol(-1)) = Delta mu(CaO) = -11453 + 8.273(T/K). The derived standard enthalpy of formation of Ca7V4O17 from elements in their normal standard states is ( 8208.97 +/- 8) kJ . mol (1) and its standard entropy is (560.05 +/- 7.5) J . K (1) . mol (1), both at T = 298.15 K. The results indicate that Ca7V4O17 decomposes into Ca3V2O8 and CaO at T = (1384 +/- 3) K.

Pyroelectric and second harmonic responses from LiTaO3 nanocrystallites evolved in a Li2O-B2O3-Ta2O5 glass system

Dendritic growth of trigonal and square bipyramidal structures of LiTaO3 nanocrystallites, of 19-30 nm size, was observed when 1.5Li(2)O-2B(2)O(3)-0.5Ta(2)O(5) glasses were subjected to controlled heat treatment between 530 degrees C and 560 degrees C/3 h. X-ray diffraction and Raman spectral studies carried out on the heat-treated samples confirmed the formation of a LiTaO3 phase along with a minor phase of ferroelectric Li2B4O7. The sample that was heat-treated at 550 degrees C/3 h was found to possess similar to 26 nm sized crystallites which exhibited a pyroelectric coefficient as high as 15 nC cm(-2) K-1 which is in the same range (23 nC cm(-2) K-1) as that of single crystalline LiTaO3 at room temperature. The corresponding figures of merit that were calculated for the fast pulse detector (F-i), the large area pyroelectric detector (F-v) and the pyroelectric point detector (F-D) were 0.517 x 10(-10) m V-1, 0.244 m(2) C-1 and 1.437 x 10(-5) Pa-1/2, respectively. Glass nanocrystal composites comprising similar to 30 nm sized crystallites exhibited broad Maker fringes and the second harmonic intensity emanated from these was 0.5 times that of KDP single crystals.

On the Structural Stability of Melt Spun Ribbons of Fe95-x Zr (x) B4Cu1 (x=7 and 9) Alloys and Correlation with Their Magnetic Properties

Melt spun ribbons of Fe95-x Zr (x) B4Cu1 with x = 7 (Z7B4) and 9 (Z9B4) alloys have been prepared, and their structure and magnetic properties have been evaluated using XRD, DSC, TEM, VSM, and Mossbauer spectroscopy. The glass forming ability (GFA) of both alloys has been calculated theoretically using thermodynamical parameters, and Z9B4 alloy is found to possess higher GFA than that of Z7B4 alloy which is validated by XRD results. On annealing, the amorphous Z7B4 ribbon crystallizes into nanocrystalline alpha-Fe, whereas amorphous Z9B4 ribbon shows two-stage crystallization process, first partially to bcc solid solution which is then transformed to nanocrystalline alpha-Fe and Fe2Zr phases exhibiting bimodal distribution. A detailed phase analysis using Mossbauer spectroscopy through hyperfine field distribution of phases has been carried out to understand the crystallization behavior of Z7B4 and Z9B4 alloy ribbons. In order to understand the phase transformation behavior of Z7B4 and Z9B4 ribbons, molar Gibbs free energies of amorphous, alpha-Fe, and Fe2Zr phases have been evaluated. It is found that in case of Z7B4, alpha-Fe is always a stable phase, whereas Fe2Zr is stable at higher temperature for Z9B4. (C) The Minerals, Metals & Materials Society and ASM International 2015

Role of spacer length in interaction between novel gemini imidazolium surfactants and Rhizopus oryzae lipase

An insight into the effects of new ionic liquid-type gemini imidazolium cationic surfactants on the structure and function of the lipases is of prime importance for their potential application. Changes in the activity, stability and structure of Rhizopus ouzae lipase in the presence of novel gemini surfactants, C-16-3-C(16)im]Br-2 and C-16-12-C(16)im]Br-2 were probed in the present study. Surfactant with shorter spacer length, C-16-3-C(i6)im]Br-2 was found to be better in improving the hydrolytic activity and thermal stability of the lipase. For both the surfactants, activation was concentration dependent. CD spectroscopy results showed a decrease in a-helix and an increase in beta-sheet content in the presence of these surfactants. A higher structural change observed in presence of C-16-12-C(16)im]Br-2 correlated with lower enzyme activity. Isothermal titration calorimetric studies showed the binding to be spontaneous in nature based on sequential two site binding model. The forces involved in binding were found to differ for the two surfactants proving that the spacer length is an important factor which governs the interaction. These surfactants could be used as promising components both in enzyme modification and media engineering for attaining the desired goals in biocatalytic reactions. (C) 2015 Elsevier B.V. All rights reserved.

Structural evolution and second harmonic properties of lithium niobate-tantalate nanocrystals embedded in a borate glass

Nano-crystals of LiNbxTa1 (-) O-x(3) were evolved by subjecting melt-quenched 1.5Li(2)O-2B(2)O(3)-xNb(2)O(5)-(1 - x)Ta2O5 glasses (where x = 0, 0.25, 0.5, 0.75 and 1.00) to a controlled 3-h isothermal heat treatment between 530 and 560 degrees C. Detailed X-ray diffraction and Raman spectral studies confirmed the formation of nano-crystalline LiNbxTa1 (-) O-x(3) along with a minor phase of ferroelectric and non-linear optic Li2B4O7. The sizes of the nanocrystals evolved in the glass were in the range of 19-37 nm for x = 0-0.75 and 23-45 nm for x = 1.00. Electron microscopic studies confirmed a transformation of the morphology of the nano-crystallites from dendritic star-shaped spherulites for x = 0 to rod-shaped structures for x = 1.00 brought about by a coalescence of crystallites. Broad Maker-fringe patterns (recorded at 532 nm) were obtained by subjecting the heat-treated glass plates to 1064 nm fundamental radiation. However, an effective second order non-linear optic coefficient, d(eff), of 0.45 pm/V, which is nearly 1.2 times the d(36) of KDP single crystal, was obtained for a 560 degrees C/3 h heat-treated glass of the representative composition x = 0.50 comprising 37 nm sized crystallites. (C) 2015 Elsevier B.V. All rights reserved.

Structural evolution and second harmonic properties of lithium niobate-tantalate nanocrystals embedded in a borate glass

Nano-crystals of LiNbxTa1 (-) O-x(3) were evolved by subjecting melt-quenched 1.5Li(2)O-2B(2)O(3)-xNb(2)O(5)-(1 - x)Ta2O5 glasses (where x = 0, 0.25, 0.5, 0.75 and 1.00) to a controlled 3-h isothermal heat treatment between 530 and 560 degrees C. Detailed X-ray diffraction and Raman spectral studies confirmed the formation of nano-crystalline LiNbxTa1 (-) O-x(3) along with a minor phase of ferroelectric and non-linear optic Li2B4O7. The sizes of the nanocrystals evolved in the glass were in the range of 19-37 nm for x = 0-0.75 and 23-45 nm for x = 1.00. Electron microscopic studies confirmed a transformation of the morphology of the nano-crystallites from dendritic star-shaped spherulites for x = 0 to rod-shaped structures for x = 1.00 brought about by a coalescence of crystallites. Broad Maker-fringe patterns (recorded at 532 nm) were obtained by subjecting the heat-treated glass plates to 1064 nm fundamental radiation. However, an effective second order non-linear optic coefficient, d(eff), of 0.45 pm/V, which is nearly 1.2 times the d(36) of KDP single crystal, was obtained for a 560 degrees C/3 h heat-treated glass of the representative composition x = 0.50 comprising 37 nm sized crystallites. (C) 2015 Elsevier B.V. All rights reserved.

Liquid phase epitaxy growth of AlxGayIn1-x-yPzAs1-zGaAs with direct band gap up to 2.0 eV

III-V pentenary semiconductor AlGaInPAs with a direct band gap of up to 2.0 eV has been grown successfully on GaAs substrates by liquid phase epitaxy;(LPE). With the introduction of the energy bowing parameters of quaternaries, the theoretical calculations agree well with the measured PL peak energy data from pentenary samples.

Estudio preliminar del comportamiento productivo y reproductivo de un hato criollo reyna bajo condiciones de confinamiento en Masatepe, Nicaragua

El presente trabajo se realizó con el objetivo de estudiar el comportamiento productivo y reproductivo de un hato criollo lechero Reyna, bajo condiciones de explotación en confinamiento, en la finca San José ubicada en Masatepe, Masaya, Nicaragua. Se analizaron 148 registros productivos y reproductivos correspondientes al período 1982 a 1989. Las características estudiadas fueron producción de leche total por lactancia (PLTOT), producción de leche ajustada a 305 días (PL305), duración de la lactancia (DL), intervalo entre partos (IEP) y edad al primer parto (EPP), además se evaluó el comportamiento de la curva de lactancia y se estimaron los parámetros que la caracterizan (a) parámetro que regula la producción inicial, (b) parámetro que regula el ascenso al pico y (c) parámetro que regula la declinación post pico, a partir de pico (RP), análisis se éstos se calcularon las variables rendimiento al tiempo al pico (TP) y la persistencia (S). En los utilizaron los métodos 1) Mínimos cuadrados (Harvey, 1987), 2) Iterativo de estimación no lineal (Mardquardt, 1968), 3) Modelo y ecuaciones propuestas por Wood, (1967) a través de procedimientos computarizados (Harvey, 1987 y SAS, 1987). Mediante análisis de varianza se estudió el efecto de los factores ambientales año de parto, época, número de partos y las interacciones año de parto por época y época por número de partos sobre PLT, PL305, DL, e IEP. Las medias de mínimos cuadrados obtenidas en este estudio fueron 1,577.65 ± 92.06 Kg, 1,560.64 ± 89.65 Kg, 264.23 ± 9.5 días, 425.96 ± 11.4 días y 1,401.08 ± 120 días para PLTOT, PL305, DL, IEP y EPP respectivamente. Los valores de a, b, c, RP, TP, y S fueron 4.19006 ± 0.5381, 0.221751 ± 0.0402, 0.005152 ± 0.00051, 7,73 Kg, 43.3 días y 6.43 % respectivamente. En el ANDEVA se encontró un efecto altamente significativo (P<0.01) del año de parto sobre las características estudiadas, resultando NS las otras fuentes de variación. Los valores y efectos antes señalados hacen notar que el criollo lechero no responde muy satisfactoriamente a condiciones de confinamiento, aunque es observable su ventaja productiva, respecto al promedio del hato nacional. Al caracterizar la curva de lactancia estimada para el hato y por número de partos ésta presentó valores sobre estimados de producción, respecto a la producción real, sin embargo no presentó atipicidad en su forma.

Comportamiento reproductivo, dinamica de produccion y calidad de la leche de genotipos lecheros bajo condiciones intensivas, en el tropico seco de Rivas, Nicaragua

Con el propósito de evaluar el comportamiento reproductivo, la dinámica de producción y calidad de la leche de genotipos lecheros en la Finca El Corpus del Meneo, manejado intensivamente, se utilizó información del periodo 1997 - 2004. Se analizaron 181 datos de edad de incorporación (EDADINC), 157 datos de edad a primer parto (EPP), 543 datos de número de servicios por concepción (NSC) y 341 datos de intervalo entre partos (IEP), 233 datos de dos pesajes de leche (diciembre 2004 y enero 2005) y sus respectivos análisis de calidad en porcentajes de grasa (%FAT), proteína (%PROT), lactosa (%LACT) y materia seca (%DRYM). Los modelos lineales aditivos incluyeron efectos de grupo racial (GRUPO), año de nacimiento (ANACV), año de incorporación (AINCV), época de incorporación (El), año de parto (APART), número de parto (NUMPA), época de parto (EP), periodo de lactancia (PERL) y sexo de la cría (SEXC) e interacciones importantes. Para EDINCV, se encontró diferencias relevantes entre GRUPOS (P<0.068), ANACV (P<0.0001), AINCV (P<0.0001) y EN (P<0.0001). Para EPP, diferencias importantes entre AINCV (P<0.0001), APART (P<0.0028) y la interacción APARTxEP (P<0.0361). Para NSC, diferencias estadísticas entre APART (P<0.0138) y NUMPA (P<0.0074). Para IEP, las diferencias importantes entre APART (P<0.0076), NUMPA (P<0.0004) y la interacción GRUPOxSEXC (P<0.0882). Se obtuvieron medias de mínimos cuadrados para EDADINC, EPP, NSC IEP de 25.75±0.72 meses, 35.71±0.88 meses, 1.34±0.11 unidades y !2.82±0.35 meses, respectivamente. Se encontró diferencias importantes entre GRUPOS (1'<0.0001 a P<0.026), NUMPA (P<0.0003 a P<0.0024), PERL (P<0.0000) y la interacción NUMPA*PERL (P<0.0000 a 0.0082), en las variables de producción y calidad, no así entre NUMPA para %DRYM. Se estimaron valores de 8.79±0.29 Kg., 4.14±0.09, 3.48±0.04, 4.31±0.02 y 12.56±0.11 para PLD, %FAT, %PROT, %LACT y %DRYM, respectivamente. GRUPOS no resulto significativo, pero se observo una tendencia marcada del GRUPO 5 (Pardo suizo) hacia una menor EDADINC, el GRUPO l (Holstein y cruces) mostró menores EPP, y los menores valores de NSC (mayor eficiencia técnica) e IEP para el GRUPO 3 (Jersey y cruces). El GRUPO con Holstein mostró mayores producciones de leche pero con menor calidad, mientras que los GRUPOS 2 y 4 (Jersey y cruces, Pardo suizo y cruces) mostraron menores producciones pero con mayor calidad general. La producción de leche por vaca promedio semanal (PLVD) a través de los años se comportó de acuerdo con algunos eventos climatológicos que determinan la disponibilidad y calidad del alimento. Se determinaron tres picos de producción (9.5, 10.0 y 9.7 kg.) y tres puntos críticos similares (9.0- 9.1 kg.). Los genotipos lecheros estudiados muestran que bajo condiciones de trópico seco y manejo intensivo es posible lograr parámetros de reproducción, producción y calidad de leche aceptable y mayores que los parámetros nacionales.

Influencia de rotación de cultivos y control de malezas sobre la cenosis, el crecimiento, desarrollo y rendimiento del cultivo de sorgo (Sorghum bicolor (L) Moench) y del cultivo de soya (Glycine max (L) Merr) cv. cristalina

En el presente trabajo se trabajó la influencia de tres métodos de control de malezas en cinco rotaciones de cultivos sobre la dinámica de asociaciones de malezas y el crecimiento y desarrollo de los cultivos. El ensayo se inició en postrera en 1992 en la Cooperativa Rigoberto López Pérez, Managua, considerando en este trabajo los resultados de la siembra de primera de 1992, se evaluó las rotaciones Sorgo-Sorgo, Maíz-Sorgo, Maíz-Soya, Pepino-Saya y Pepino-Sorgo y los métodos de control químico, control período crítico y control limpia periódica. Los resultados demuestran que el control limpia periódica efectuó un control satisfactorio de las malezas, mientras que los controles químico y por período crítico fueron insuficientes, debido a que predominaban las especies de monocotiledóneas como: cenchrus spp y panicum hurtícaule de Competitividad alargada. Las rotaciones influyen sobre el nivel de enmalezamiento, siendo más bajo en las Rotaciones Pepino-Sorgo y en las Rotaciones Pepino-Saya que en las demás rotaciones. En cuanto al rendimiento los mejores resultados se obtuvieron en la Rotación Pepino-Sorgo con 3,560.33 kg/Ha, (tres mil quinientos sesenta punto treinta y tres kilogramos por hectárea) de Sorgo y Maíz-Soya con 1,484.9 kg/Ha, (un mil cuatrocientos ochenta y cuatro punto nueve kilogramos por hectárea) de Soya debido a que el cultivo ejerció un mayor control sobre las malezas.