Correction of resistance to penetration by pedofunctions and a reference soil water content

The soil penetration resistance is an important indicator of soil compaction and is strongly influenced by soil water content. The objective of this study was to develop mathematical models to normalize soil penetration resistance (SPR), using a reference value of gravimetric soil water content (U). For this purpose, SPR was determined with an impact penetrometer, in an experiment on a Dystroferric Red Latossol (Rhodic Eutrudox), at six levels of soil compaction, induced by mechanical chiseling and additional compaction by the traffic of a harvester (four, eight, 10, and 20 passes); in addition to a control treatment under no-tillage, without chiseling or additional compaction. To broaden the range of U values, SPR was evaluated in different periods. Undisturbed soil cores were sampled to quantify the soil bulk density (BD). Pedotransfer functions were generated correlating the values of U and BD to the SPR values. By these functions, the SPR was adequately corrected for all U and BD data ranges. The method requires only SPR and U as input variables in the models. However, different pedofunctions are needed according to the soil layer evaluated. After adjusting the pedotransfer functions, the differences in the soil compaction levels among the treatments, previously masked by variations of U, became detectable.

Managing R&D Content with Web-based KM Software

Työssä tutkittiin tehokasta tietojohtamista globaalin metsäteollisuusyrityksen tutkimus ja kehitys verkostossa. Työn tavoitteena oli rakentaa kuvaus tutkimus ja kehitys sisällön hallintaan kohdeyrityksen käyttämän tietojohtamisohjelmiston avulla. Ensin selvitettiin käsitteitä tietämys ja tietojohtaminen kirjallisuuden avulla. Selvityksen perusteella esitettiin prosessimalli, jolla tietämystä voidaan tehokkaasti hallita yrityksessä. Seuraavaksi analysoitiin tietojohtamisen asettamia vaatimuksia informaatioteknologialle ja informaatioteknologian roolia prosessimallissa. Verkoston vaatimukset tietojohtamista kohtaan selvitettiin haastattelemalla yrityksen avainhenkilöitä. Haastatteluiden perusteella järjestelmän tuli tehokkaasti tukea virtuaalisten projektiryhmien työskentelyä, mahdollistaa tehtaiden välinen tietämyksen jakaminen ja tukea järjestelmään syötetyn sisällön hallintaa. Ensiksi järjestelmän käyttöliittymän rakenne ja salaukset muokattiin vastaamaan verkoston tarpeita. Rakenne tarjoaa työalueen työryhmille ja alueet tehtaiden väliseen tietämyksen jakamiseen. Sisällönhallintaa varten järjestelmään kehitettiin kategoria, profiloitu portaali ja valmiiksi määriteltyjä hakuja. Kehitetty malli tehostaa projektiryhmien työskentelyä, mahdollistaa olemassa olevan tietämyksen hyväksikäytön tehdastasolla sekä helpottaa tutkimus ja kehitys aktiviteettien seurantaa. Toimenpide-ehdotuksina esitetään järjestelmän integrointia tehtaiden operatiivisiin ohjausjärjestelmiin ja ohjelmiston käyttöönottoa tehdastason projektinhallinta työkaluksi.Ehdotusten tavoitteena on varmistaa sekä tehokas tietämyksen jakaminen tehtaiden välillä että tehokas tietojohtaminen tehdastasolla.

Search Interfaces on the Web: Querying and Characterizing

Current-day web search engines (e.g., Google) do not crawl and index a significant portion of theWeb and, hence, web users relying on search engines only are unable to discover and access a large amount of information from the non-indexable part of the Web. Specifically, dynamic pages generated based on parameters provided by a user via web search forms (or search interfaces) are not indexed by search engines and cannot be found in searchers’ results. Such search interfaces provide web users with an online access to myriads of databases on the Web. In order to obtain some information from a web database of interest, a user issues his/her query by specifying query terms in a search form and receives the query results, a set of dynamic pages that embed required information from a database. At the same time, issuing a query via an arbitrary search interface is an extremely complex task for any kind of automatic agents including web crawlers, which, at least up to the present day, do not even attempt to pass through web forms on a large scale. In this thesis, our primary and key object of study is a huge portion of the Web (hereafter referred as the deep Web) hidden behind web search interfaces. We concentrate on three classes of problems around the deep Web: characterization of deep Web, finding and classifying deep web resources, and querying web databases. Characterizing deep Web: Though the term deep Web was coined in 2000, which is sufficiently long ago for any web-related concept/technology, we still do not know many important characteristics of the deep Web. Another matter of concern is that surveys of the deep Web existing so far are predominantly based on study of deep web sites in English. One can then expect that findings from these surveys may be biased, especially owing to a steady increase in non-English web content. In this way, surveying of national segments of the deep Web is of interest not only to national communities but to the whole web community as well. In this thesis, we propose two new methods for estimating the main parameters of deep Web. We use the suggested methods to estimate the scale of one specific national segment of the Web and report our findings. We also build and make publicly available a dataset describing more than 200 web databases from the national segment of the Web. Finding deep web resources: The deep Web has been growing at a very fast pace. It has been estimated that there are hundred thousands of deep web sites. Due to the huge volume of information in the deep Web, there has been a significant interest to approaches that allow users and computer applications to leverage this information. Most approaches assumed that search interfaces to web databases of interest are already discovered and known to query systems. However, such assumptions do not hold true mostly because of the large scale of the deep Web – indeed, for any given domain of interest there are too many web databases with relevant content. Thus, the ability to locate search interfaces to web databases becomes a key requirement for any application accessing the deep Web. In this thesis, we describe the architecture of the I-Crawler, a system for finding and classifying search interfaces. Specifically, the I-Crawler is intentionally designed to be used in deepWeb characterization studies and for constructing directories of deep web resources. Unlike almost all other approaches to the deep Web existing so far, the I-Crawler is able to recognize and analyze JavaScript-rich and non-HTML searchable forms. Querying web databases: Retrieving information by filling out web search forms is a typical task for a web user. This is all the more so as interfaces of conventional search engines are also web forms. At present, a user needs to manually provide input values to search interfaces and then extract required data from the pages with results. The manual filling out forms is not feasible and cumbersome in cases of complex queries but such kind of queries are essential for many web searches especially in the area of e-commerce. In this way, the automation of querying and retrieving data behind search interfaces is desirable and essential for such tasks as building domain-independent deep web crawlers and automated web agents, searching for domain-specific information (vertical search engines), and for extraction and integration of information from various deep web resources. We present a data model for representing search interfaces and discuss techniques for extracting field labels, client-side scripts and structured data from HTML pages. We also describe a representation of result pages and discuss how to extract and store results of form queries. Besides, we present a user-friendly and expressive form query language that allows one to retrieve information behind search interfaces and extract useful data from the result pages based on specified conditions. We implement a prototype system for querying web databases and describe its architecture and components design.

A Three-Level Approach for Analyzing User Behavior in Ongoing Relationships

Peer-reviewed

Disseny i elaboració d'un gimnàs on-line

L’evolució que ha experimentat la societat, les grans ciutats, la industrialització i molts altres factors han modificat l’estil de vida de les persones accentuant-ne, irremediablement, el sedentarisme i l’abstinència de realitzar exercici físic. La pràctica esportiva i/o d’exercici físic realitzada sota les condicions recomanades pels professionals, és beneficiosa per millorar el nivell de salut o mantenir-lo en tot el possible, ja que provoca modificacions beneficioses sobre el metabolisme, el sistema cardiovascular i l’aparell locomotor. Lamentablement, l’hàbit de realitzar exercici físic no és comú en totes les persones, ja sigui per l’estil de vida que genera incompatibilitats d’horaris amb la feina, fills i familiars o bé per mandra o desgana d’haver d’aprofitar aquelles estones de temps lliure per dedicar-los al culte del cos i de la salut. Els efectes negatius que suposa una modalitat de vida sedentària per a la salut són notablement elevats, amb la qual cosa, cal buscar sistemes per augmentar l’ interès de la població per la pràctica de l’esport i l’activitat física. La creació d’aquest projecte neix de la idea d’unir el fet d’enginyar un mètode per incrementar l’interès de les persones per l’exercici físic amb els avenços tecnològics que s’han realitzat aquesta última dècada relacionats amb el desenvolupament web i multimèdia. A grans trets, la idea general d’aquest projecte es basa en el cas d’un gimnàs real i en actiu, amb necessitat de crear un portal web que serveixi alhora de pàgina web informativa i d’eina de gestió acadèmica del centre proporcionant certes funcionalitats als clients tot presentant-los una nova modalitat de realitzar exercici físic dirigit: realitzar-lo des de casa. Per desenvolupar tot el sistema informàtic que ho durà a terme, després de realitzar una recerca, anàlisi i elecció de les eines mitjançant les quals poder-ho realitzar, s’ha optat per crear l’entorn web mitjançant els llenguatges HTML i PHP en combinació amb els fulls d’estil CSS. Pel que fa a l’entorn de desenvolupament, s’ha utilitzat Notepad++ i com a entorn de proves, WAMP Server. Per últim, pel que fa a la transmissió del contingut multimèdia (vídeos de les sessions d’activitats) s’ha utilitzat Flash Media Interactive Server en combinació de Flash Media Live Encoder per codificar-ne el contingut. L’usuari final, des de qualsevol punt del planeta, podrà realitzar (sempre i quan disposi del temps i el material necessari i una connexió a Internet) en temps real i en directe les classes dirigides que es realitzen al centre. Tanmateix, també s’ha desenvolupat una botiga virtual on qualsevol persona podrà comprar-hi, entre d’altres coses relacionades amb la pràctica de l’exercici físic, tot el material necessari per realitzar qualsevol de les activitats que s’imparteixen al gimnàs i ho rebrà còmodament a casa. Aprofitar unes circumstàncies econòmiques adverses per generar una nova manera de captar clients proporcionant-los una alternativa econòmica, diferent, nova i original d’anar al gimnàs. Temps de crisis, temps d’oportunitats. Aquesta és la moralitat que pretén donar aquest projecte.

Mathematical analysis of maximum power generated by photovoltaic systems and fitting curves for standard test conditions

The rural electrification is characterized by geographical dispersion of the population, low consumption, high investment by consumers and high cost. Moreover, solar radiation constitutes an inexhaustible source of energy and in its conversion into electricity photovoltaic panels are used. In this study, equations were adjusted to field conditions presented by the manufacturer for current and power of small photovoltaic systems. The mathematical analysis was performed on the photovoltaic rural system I-100 from ISOFOTON, with power 300 Wp, located at the Experimental Farm Lageado of FCA/UNESP. For the development of such equations, the circuitry of photovoltaic cells has been studied to apply iterative numerical methods for the determination of electrical parameters and possible errors in the appropriate equations in the literature to reality. Therefore, a simulation of a photovoltaic panel was proposed through mathematical equations that were adjusted according to the data of local radiation. The results have presented equations that provide real answers to the user and may assist in the design of these systems, once calculated that the maximum power limit ensures a supply of energy generated. This real sizing helps establishing the possible applications of solar energy to the rural producer and informing the real possibilities of generating electricity from the sun.

Packaging Content for Aggregated and Federated Repositories through APTrust

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

DSpace REST API: an Interface for Reusing DSpace Content, and Practical Applications

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Path Analysis of Online Users Using Clickstream Da-ta: Case Online Magazine Website

This paper explores behavioral patterns of web users on an online magazine web-site. The goal of the study is to first find and visualize user paths within the data generated during collection, and to identify some generic behavioral typologies of user behavior. To form a theoretical foundation for processing data and identifying behavioral ar-chetypes, the study relies on established consumer behavior literature to propose typologies of behavior. For data processing, the study utilizes methodologies of ap-plied cluster analysis and sequential path analysis. Utilizing a dataset of click stream data generated from the real-life clicks of 250 ran-domly selected website visitors over a period of six weeks. Based on the data collect-ed, an exploratory method is followed in order to find and visualize generally occur-ring paths of users on the website. Six distinct behavioral typologies were recog-nized, with the dominant user consuming mainly blog content, as opposed to editori-al content. Most importantly, it was observed that approximately 80% of clicks were of the blog content category, meaning that the majority of web traffic occurring in the site takes place in content other than the desired editorial content pages. The out-come of the study is a set of managerial recommendations for each identified behavioral archetype.

Consumer perceptions on a content-based digital service:the usage and service quality of Masennusinfo.fi

Kuluttajat käyttävät sisältöpohjaisia digitaalisia palveluita jatkuvasti saadakseen lisää tietoa terveydestään. Samalla he arvioivat käyttämiensä palveluiden laatua. Jotta yritykset voisivat suunnitella ja tarjota parhaita mahdollisia digitaalisia palveluita kuluttajille, yritysten tulisi tunnistaa ja analysoida kuluttajien kokemuksia ja käyttötarkoituksia heidän palveluissaan. Tämän tutkimuksen tarkoituksena on kuvailla kuluttajien näkemyksiä Masennusinfo.fi:stä, joka on sisältöpohjainen digitaalinen palvelu, ja joka tarjoaa käyttäjilleen tietoa masennuksesta. Päämääränä on selvittää, kuinka kuluttajat kokevat lääkeyrityksen tarjoaman palvelun laadun ja mihin tarkoituksiin sitä käytetään. Tutkimuksen tarkoitus voidaan jakaa kolmeen osa-ongelmaan: Mihin tarkoituksiin kuluttajat käyttävät sisältöpohjaisia digitaalisia palveluita? Miten kuluttajat kokevat näiden palveluiden laadun? Kuinka käyttötarkoitus ja koettu laatu eroavat eri käyttäjäryhmissä? Tutkimus toteutetaan web-pohjaisella kyselytutkimuksella. Mittarit tehdään teoreettisen viitekehyksen pohjalta, joka perustuu aikaisempaan tutkimukseen. Tutkimuksen empiirinen osuus suoritetaan pop-up tutkimuksella, joka sijoitetaan tutkittavalle sivustolle antaen näin kaikille palvelun käyttäjille mahdollisuuden vastata kyselyyn. Tulokset osoittavat, että palvelua käyttävät suurimmaksi osaksi naiset, suhteellisen nuoret 16−29- vuotiaat, tai yli keski-ikäiset 50−65-vuotiaat henkilöt, jotka ovat joko työssäkäyviä tai opiskelijoita ja korkeasti koulutettuja. Masennusinfo.fi nähdään laadukkaana palveluna kaikissa käyttäjäryhmissä sekä sen käytettävyyden että sisällön perusteella. Käyttötarkoituksetkin ovat jokseenkin samankaltaisia eri käyttäjäryhmissä. Yleensä palvelua käytetään tiedon hakemiseen sairauden alkuvaiheessa. Löydöksien perusteella esitetään, että palvelua muokataan vastaamaan yhä paremmin sen käyttötarkoituksia ja tyypillistä käyttäjäprofiilia. Koska muutamia pieniä eroja käyttäjäryhmien näkemyksissä havaittiin, palveluiden tuottaja päättää, minkä ryhmän mieltymyksiä se noudattaa.

Adherence to Treatment in Psychotic Disorders - Development of user-centered mobile health intervention

The aim of this study was to explore adherence to treatment among people with psychotic disorders through the development of user-centered mobile technology (mHealth) intervention. More specifically, this study investigates treatment adherence as well as mHealth intervention and the factors related to its possible usability. The data were collected from 2010 to 2013. First, patients’ and professionals’ perceptions of adherence management and restrictive factors of adherence were described (n = 61). Second, objectives and methods of the intervention were defined based on focus group interviews and previously used methods. Third, views of patients and professionals about barriers and requirements of the intervention were described (n = 61). Fourth, mHealth intervention was evaluated based on a literature review (n = 2) and patients preferences regarding the intervention (n = 562). Adherence management required support in everyday activities, social networks and maintaining a positive outlook. The factors restricting adherence were related to illness, behavior and the environment. The objective of the intervention was to support the intention to follow the treatment guidelines and recommendations with mHealth technology. The barriers and requirements for the use of the mHealth were related to technology, organizational issues and the users themselves. During the course of the intervention, 33 (6%) out of 562 participants wanted to edit the content, timing or amount of the mHealth tool, and 23 (4%) quit the intervention or study before its conclusion. According to the review, mHealth interventions were ineffective in promoting adherence. Prior to the intervention, participants perceived that adherence could be supported, and the use of mHealth as a part of treatment was seen as an acceptable and efficient method for doing so. In conclusion, the use of mHealth may be feasible among people with psychotic disorders. However, clear evidence for its effectiveness in regards to adherence is still currently inconclusive.

Mures : Un système de recommandation de musique

Pendant la dernière décennie nous avons vu une transformation incroyable du monde de la musique qui est passé des cassettes et disques compacts à la musique numérique en ligne. Avec l'explosion de la musique numérique, nous avons besoin de systèmes de recommandation de musique pour choisir les chansons susceptibles d’être appréciés à partir de ces énormes bases de données en ligne ou personnelles. Actuellement, la plupart des systèmes de recommandation de musique utilisent l’algorithme de filtrage collaboratif ou celui du filtrage à base de contenu. Dans ce mémoire, nous proposons un algorithme hybride et original qui combine le filtrage collaboratif avec le filtrage basé sur étiquetage, amélioré par la technique de filtrage basée sur le contexte d’utilisation afin de produire de meilleures recommandations. Notre approche suppose que les préférences de l'utilisateur changent selon le contexte d'utilisation. Par exemple, un utilisateur écoute un genre de musique en conduisant vers son travail, un autre type en voyageant avec la famille en vacances, un autre pendant une soirée romantique ou aux fêtes. De plus, si la sélection a été générée pour plus d'un utilisateur (voyage en famille, fête) le système proposera des chansons en fonction des préférences de tous ces utilisateurs. L'objectif principal de notre système est de recommander à l'utilisateur de la musique à partir de sa collection personnelle ou à partir de la collection du système, les nouveautés et les prochains concerts. Un autre objectif de notre système sera de collecter des données provenant de sources extérieures, en s'appuyant sur des techniques de crawling et sur les flux RSS pour offrir des informations reliées à la musique tels que: les nouveautés, les prochains concerts, les paroles et les artistes similaires. Nous essayerons d’unifier des ensembles de données disponibles gratuitement sur le Web tels que les habitudes d’écoute de Last.fm, la base de données de la musique de MusicBrainz et les étiquettes des MusicStrands afin d'obtenir des identificateurs uniques pour les chansons, les albums et les artistes.

The autotelic experience : a design approach to user experience

Si les principes d’utilisabilité guident la conception de solutions de design interactif pour s’assurer que celles-ci soient « utilisables », quels principes guident la conception d’objets interactifs pour s’assurer que l’expérience subjective de l’usager (UX) soit adéquate et mémorable? Que manque-t-il au cadre de l‘UX pour expliquer, comprendre, et anticiper en tant que designer une expérience mémorable (‘an experience’; Dewey, 1934)? La question centrale est issue d’une double problématique : (1) le cadre théorique de l’UX est incomplet, et (2) les processus et capacités des designers ne sont pas considérés et utilisés à leur pleine capacité en conception UX. Pour répondre à cette question, nous proposons de compléter les modèles de l’UX avec la notion d’expérience autotélique qui appartient principalement à deux cadres théoriques ayant bien cerné l’expérience subjective, soit l’expérience optimale (ou Flow) de Csikszentmihalyi (1988) et l’expérience esthétique selon Schaeffer (2001). L’autotélie est une dimension interne du Flow alors qu’elle couvre toute l’expérience esthétique. L’autotélie est une expérience d’éveil au moment même de l’interaction. Cette prise de conscience est accompagnée d’une imperceptible tension de vouloir faire durer ce moment pour faire durer le plaisir qu’il génère. Trois études exploratoires ont été faites, s’appuyant sur une analyse faite à partir d’un cadre théorique en trois parties : le Flow, les signes d’activité non verbale (les gestes physiques) et verbale (le discours) ont été évalués pour voir comment ceux-ci s’associent. Nos résultats tendent à prouver que les processus spatiaux jouent un rôle de premier plan dans l’expérience autotélique et par conséquent dans une UX optimale. De plus, ils suggèrent que les expériences pragmatique et autotélique sont ancrées dans un seul et même contenu, et que leur différence tient au type d’attention que le participant porte sur l’interaction, l’attention ordinaire ou de type autotélique. Ces résultats nous ont menés à proposer un modèle pour la conception UX. L’élément nouveau, resté jusqu’alors inaperçu, consiste à s’assurer que l’interface (au sens large) appelle une attitude réceptive à l’inattendu, pour qu’une information puisse déclencher les processus spatiaux, offrant une opportunité de passer de l’attention ordinaire à l’attention autotélique. Le nouveau modèle ouvre la porte à une meilleure valorisation des habiletés et processus du designer au sein de l’équipe multidisciplinaire en conception UX.

Development of Best Practices for Ship Recycling Processes

Ship recycling has been considered as the best means to dispose off an obsolete ship. The current state of art of technology combined with the demands of sustainable developments from the global maritime industrial sector has modified the status of erstwhile ‘ship breaking’ involving ship scrap business to a modern industry undertaking dismantling of ships and recycling/reusing the dismantled products in a supply chain of pre owned product market by following the principles of recycling. Industries will have to formulate a set of best practices and blend them with the engineering activities for producing better quality products, improving the productivity and for achieving improved performances related to sustainable development. Improved performance by industries in a sustainable development perspective is accomplished only by implementing the 4E principles, ie.,. ecofriendliness, engineering efficiency, energy conservation and ergonomics in their core operations. The present study has done a comprehensive investigation into various ship recycling operations for formulating a set of best practices.Being the ultimate life cycle stage of a ship, ship recycling activities incorporate certain commercial procedures well in advance to facilitate the objectives of dismantling and recycling/reusing of various parts of the vessel. Thorough knowledge regarding these background procedures in ship recycling is essential for examining and understanding the industrial business operations associated with it. As a first step, the practices followed in merchant shipping operations regarding the decision on decommissioning have been and made available in the thesis. Brief description about the positioning methods and important preparations for the most feasible ship recycling method ie.,. beach method have been provided as a part of the outline of the background information. Available sources of guidelines, codes and rules & regulations for ship recycling have been compiled and included in the discussion.Very brief summary of practices in major ship recycling destinations has been prepared and listed for providing an overview of the global ship recycling activities. The present status of ship recycling by treating it as a full fledged engineering industry has been brought out to establish the need for looking into the development of the best practices. Major engineering attributes of ship as a unique engineering product and the significant influencing factors on her life cycle stage operations have been studied and added to the information base on ship recycling. Role of ship recycling industry as an important player in global sustainable development efforts has been reviewed by analysing the benefits of ship recycling. A brief synopsis on the state of art of ship recycling in major international ship recycling centres has also been incorporated in the backdrop knowledgebase generation on ship recycling processes.Publications available in this field have been reviewed and classified into five subject categories viz., Infrastructure for recycling yards and methods of dismantling, Rules regarding ship recycling activities, Environmental and safety aspects of ship recycling, Role of naval architects and ship classification societies, Application of information technology and Demand forecasting. The inference from the literature survey have been summarised and recorded. Noticeable observations in the inference include need of creation of a comprehensive knowledgebase on ship recycling and its effective implementation in the industry and the insignificant involvement of naval architects and shipbuilding engineers in ship recycling industry. These two important inferences and the message conveyed by them have been addressed with due importance in the subsequent part of the present study.As a part of the study the importance of demand forecasting in ship recycling has been introduced and presented. A sample input for ship recycling data for implementation of computer based methods of demand forecasting has been presented in this section of the thesis.The interdisciplinary nature of engineering processes involved in ship recycling has been identified as one of the important features of this industry. The present study has identified more than a dozen major stake holders in ship recycling having their own interests and roles. It has also been observed that most of the ship recycling activities is carried out in South East Asian countries where the beach based ship recycling is done in yards without proper infrastructure support. A model of beach based ship recycling has been developed and the roles, responsibilities and the mutual interactions of the elements of the system have been documented as a part of the study Subsequently the need of a generation of a wide knowledgebase on ship recycling activities as pointed out by the literature survey has been addressed. The information base and source of expertise required to build a broad knowledgebase on ship recycling operations have been identified and tabulated. Eleven important ship recycling processes have been identified and a brief sketch of steps involved in these processes have been examined and addressed in detail. Based on these findings, a detailed sequential disassembly process plan of ship recycling has been prepared and charted. After having established the need of best practices in ship recycling initially, the present study here identifies development of a user friendly expert system for ship recycling process as one of the constituents of the proposed best practises. A user friendly expert system has been developed for beach based ship recycling processes and is named as Ship Recycling Recommender (SRR). Two important functions of SRR, first one for the ‘Administrators’, the stake holders at the helm of the ship recycling affairs and second one for the ‘Users’, the stake holders who execute the actual dismantling have been presented by highlighting the steps involved in the execution of the software. The important output generated, ie.,. recommended practices for ship dismantling processes and safe handling information on materials present onboard have been presented with the help of ship recycling reports generated by the expert system. A brief account of necessity of having a ship recycling work content estimation as part of the best practices has been presented in the study. This is supported by a detailed work estimation schedule for the same as one of the appendices.As mentioned earlier, a definite lack of involvement of naval architect has been observed in development of methodologies for improving the status of ship recycling industry. Present study has put forward a holistic approach to review the status of ship recycling not simply as end of life activity of all ‘time expired’ vessels, but as a focal point of integrating all life cycle activities. A new engineering design philosophy targeting sustainable development of marine industrial domain, named design for ship recycling has been identified, formulated and presented. A new model of ship life cycle has been proposed by adding few stages to the traditional life cycle after analysing their critical role in accomplishing clean and safe end of life and partial dismantling of ships. Two applications of design for ship recycling viz, recyclability of ships and her products and allotment of Green Safety Index for ships have been presented as a part of implementation of the philosophy in actual practice.