Micro-Shear Bond Strength of Different Adhesives to Human Dental Enamel

The aim of this study was to evaluate the micro-shear bond strength of 5 adhesive systems to enamel, one single-bottle acid-etch adhesive (O), two self-etching primers (P) and two all-in-one self-etching adhesives (S). Method: Sixty premolar enamel surfaces (buccal or lingual) were ground flat with 400- and 600-grit SiC papers and randomly divided into 5 groups (n=12), according to the adhesive system.. SB2 - Single Bond 2 (O); CSE - Clearfil SE Bond (P); ADS - AdheSE (P); PLP - Adper Prompt L-Pop (S); XE3 - Xeno III (S). Tygon tubing (inner diameter of 0.8mm) restricted the bonding area to obtain the resin composite (Z250) cylinders. After storage in distilled water at 37 degrees C for 24h and thermocycling, micro-shear testing was performed (crosshead speed of 0.5mm/min). Data were submitted to one-way ANOVA and Tukey test (a=5%). Samples were also subjected to stereomicroscopic and SEM evaluations after micro-shear testing. Mean bond strength values (MPa +/- SD) and the results of Tukey test were: SB2: 36.36(+/- 3.34)a; ADS: 33.03(+/- 7.83)a; XE3: 32.76(+/- 5.61)a; CSE: 30.61(+/- 6.68)a; PLP: 22.17(+/- 6.05)b. Groups with the same letter were not statistically different. It can be concluded that no significant difference was there between SB2, ADS, XE3 and CSE, in spite of different etching patterns of these adhesives. Only PLP presented statistically lower bond strengths compared with others. J Clin Pediatr Dent 35(3): 301-304, 2011

Direct comparison of the bond strength results of the different test methods: A critical literature review

Objective. The goal of this paper is to undertake a literature search collecting all dentin bond strength data obtained for six adhesives with four tests ( shear, microshear, tensile and microtensile) and to critically analyze the results with respect to average bond strength, coefficient of variation, mode of failure and product ranking. Method. A PubMed search was carried out for the years between 1998 and 2009 identifying publications on bond strength measurements of resin composite to dentin using four tests: shear, tensile, microshear and microtensile. The six adhesive resins were selected covering three step systems ( OptiBond FL, Scotch Bond Multi-Purpose Plus), two-step (Prime & Bond NT, Single Bond, Clear. l SE Bond) and one step (Adper Prompt L Pop). Results. Pooling results from 147 references showed an ongoing high scatter in the bond strength data regardless which adhesive and which bond test was used. Coefficients of variation remained high (20-50%) even with the microbond test. The reported modes of failure for all tests still included high number of cohesive failures. The ranking seemed to be dependant on the test used. Significance. The scatter in dentin bond strength data remains regardless which test is used confirming Finite Element Analysis predicting non-uniform stress distributions due to a number of geometrical, loading, material properties and specimens preparation variables. This reopens the question whether, an interfacial fracture mechanics approach to analyze the dentin - adhesive bond is not more appropriate for obtaining better agreement among dentin bond related papers. (C) 2009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Durability of Enamel Bonding Using One-step Self-etch Systems on Ground and Unground Enamel

Objective: To examine the morphological, early and long-term microtensile bond strengths (mu TBS) of one-step self-etch systems to unground and ground enamel. Materials and Methods: Resin composite (Filtek Z250) buildups were bonded to the buccal and lingual enamel surfaces (unground, bur-cut or SiC-roughened enamel) of third molars after adhesive application using the following adhesives: Clearfil S(3) Bond (CS3); Adper Prompt L-Pop (ADP); iBond (iB) and, as the control, Clearfil SE Bond (CSE). Six tooth halves were assigned for each condition. After storage in water (24 hours/37 degrees C), the bonded specimens were sectioned into beams (0.8 mm(2)) and subjected to pTBS (0.5 mm/min) either immediately (IM) or after six (6M) or 12 months (12M) of water storage. The data were analyzed by three-way repeated measures ANOVA and Tukey`s test (alpha=0.05). Surface conditioning was observed under scanning electron microscopy (SEM). Results: The mu TBS in the Si-C paper and diamond bur groups were similar and higher than the unground group. No significant difference was observed among the different storage periods, except for CS3, which showed an increase in the pTBS after 12M. The etching pattern was more retentive on ground enamel. Conclusions: One-step self-etch adhesives showed higher bond strengths on ground enamel and no reductions in resin-enamel bonds were observed after 12M of water storage.

Early and 24-hour bond strength and degree of conversion of etch-and-rinse and self-etch adhesives

Purpose: To evaluate early and 24-hour microtensile bond strength (mu TBS) and the degree of conversion (DC) of one representative adhesive system from each of the four current bonding approaches. Methods: 40 human molars were sectioned occluso-gingivally into two halves. Resin composite was bonded incrementally to flat, mid-coronal dentin, using the adhesives Adper Scotchbond MP (MP); Adper Scotchbond 2 (SB); Clearfil SE Bond (SE); and Adper Prompt L-Pop (LP) according to the respective manufacturer`s instructions (n= 10). One half was immediately sectioned into sticks and subjected to mu TBS test. As the sectioning process took approximately 1 hour, the results were designated as 1-hour bond strengths. The other half was stored in distilled water at 37 degrees C for 24 hours before being sectioned and tested. The DC of these systems was measured using Fourier Transform-Raman spectroscopy in three periods: immediately, 1 and 24 hours after polymerization. Data were analyzed with ANOVA and Tukey`s tests. Results: There were no significant differences between the 1-hour and 24-hour bond strengths (P> 0.05), or among the DC measured immediately, 1 hour and 24 hours after polymerization (P> 0.05). However, significant differences were observed among adhesives (P< 0.05). mu TBS values obtained, in MPa (1 hour/24 hour), were: SB (48.6 + 1.3/48.4 + 3.5) = SE (51.9 + 4.7/53.3 +/- 2.9) > MP (35.3 +/- 10.9/38.6 + 6.7) > LP (25.5 + 1.1/26.0 + 1.5). The DC, in percentage (immediately/1 hour/24 hour), were: SE (81/82/87) > MP (79/77/81) > SB (60/63/65) > LP (39/37/42).

Shear Bond Strength and Ultrastructural Interface Analysis of Different Adhesive Systems to Bleached Dentin

Background: It remains unclear as to whether or not dental bleaching affects the bond strength of dentin/resin restoration. Purpose: To evaluated the bond strength of adhesive systems to dentin submitted to bleaching with 38% hydrogen peroxide (HP) activated by LED-laser and to assess the adhesive/dentin interfaces by means of SEM. Study design: Sixty fragments of dentin (25 mm(2)) were included and divided into two groups: bleached and unbleached. HP was applied for 20 s and photoactivated for 45 s. Groups were subdivided according to the adhesive systems (n = 10): (1) two-steps conventional system (Adper Single Bond), (2) two-steps self-etching system (Clearfil standard error (SE) Bond), and (3) one-step self-etching system (Prompt L-Pop). The specimens received the Z250 resin and, after 24 h, were submitted to the bond strength test. Additional 30 dentin fragments (n = 5) received the same surface treatments and were prepared for SEM. Data were analyzed by ANOVA and Tukey`s test (alpha = 0.05). Results: There was significant strength reduction in bleached group when compared to unbleached group (P < 0.05). Higher bond strength was observed for Prompt. Single Bond and Clearfil presented the smallest values when used in bleached dentin. SEM analysis of the unbleached specimens revealed long tags and uniform hybrid layer for all adhesives. In bleached dentin, Single Bond provided open tubules and with few tags, Clearfil determined the absence of tags and hybrid layer, and Prompt promoted a regular hybrid layer with some tags. Conclusions: Prompt promoted higher shear bond strength, regardless of the bleaching treatment and allowed the formation of a regular and fine hybrid layer with less deep tags, when compared to Single Bond and Clearfil. Microsc. Res. Tech. 74:244-250, 2011. (C) 2010 Wiley-Liss, Inc.

Grau de exposição a praguicidas organoclorados em moradores de aterro a céu aberto

OBJETIVO: Estimar o grau de exposição interna aos praguicidas organoclorados (POP) dos moradores de um atêrro a céu aberto. MÉTODOS: Estudo observacional, de aferição simultânea e controlado, cujo fator de estudo foi residir em área contaminada por POP e o efeito foi a concentração sanguínea dessas substâncias. A população de estudo foi de 238 pessoas residentes em um aterro a céu aberto (Pilões), no município de Cubatão, SP; e a população de controle ficou dimensionada em 258 pessoas, também residentes no mesmo município (Cota 200). Foram analisados os praguicidas HCB, p-p'DDT, p-p'DDE, p-p'DDD, o-p'DDT, a HCH; b HCH; g HCH; Aldrin; Dieldrin; Endrin; Heptaclor; Heptaclor-epoxi e Mirex. RESULTADOS: Os teores médios sangüíneos de HCB em Pilões foram de 4,66 µg/L, 155 vezes maior que a média na Cota 200 (0,03 µg/L). Em Pilões, os teores médios de DDT total foram de 3,71 µg/L, duas vezes maior do que na Cota 200 (1,85 µg/L) e o HCH total apresentou concentrações sangüíneas seis vezes maiores em Pilões, 0,84 µg/L, contra 0,13 µg/L. CONCLUSÕES: Evidenciou-se associação positiva entre residir em Pilões e apresentar teores sangüíneos de POP, com risco muitas vezes maior quando comparado a localidades sem a presença desses contaminantes.

Dynamical analysis of compositions

This paper analyzes musical opus from the point of view of two mathematical tools, namely the entropy and the multidimensional scaling (MDS). The Fourier analysis reveals a fractional dynamics, but the time rhythm variations are diluted along the spectrum. The combination of time-window entropy and MDS copes with the time characteristics and is well suited to treat a large volume of data. The experiments focus on a large number of compositions classified along three sets of musical styles, namely “Classical”, “Jazz”, and “Pop & Rock” compositions. Without lack of generality, the present study describes the application of the tools and the sets of musical compositions in a methodology leading to clear conclusions, but extensions to other possibilities are straightforward. The results reveal significant differences in the musical styles, demonstrating the feasibility of the proposed strategy and motivating further developments toward a dynamical analysis of musical compositions.

A motivação nas aulas de Dança Clássica: a música como estímulo promotor de motivação em alunas do 4º ano do Curso de Dança da Academia de Música de Vilar do Paraíso

Relatório Final de Estágio apresentado à Escola Superior de Dança, com vista à obtenção do grau de Mestre em Ensino de Dança.

‘O meio é a mensagem’, de Harold A. Innis a Marshall McLuhan

Os contributos para pensar a comunicação, os media e a cultura de Harold A. Innis e Marshall McLuhan foram durante muitas décadas ou praticamente esquecidos ou ignorados, no caso de Innis, ou olhados com desconfiança ou fascínio, no caso de McLuhan, no seio do que se designa hoje por ciências da comunicação. Nos últimos anos, essa situação alterou-se significativamente e hoje Innis desperta um enorme interesse na teoria da comunicação e na economia política dos media. Estes dois autores canadianos, o primeiro escrevendo entre os anos 20 e 40 do século XX e o segundo a partir dos anos 50 e até ao final da década de 70, centraram a sua atenção nas formas/suportes técnicos através dos quais comunicamos e como esses dispositivos produzem efeitos a longo prazo na sociedade, na cultura, na política e na ordem do sensorium humano. Como se está já a ver, ao contrário das tradições mainstream norte-americanas do mesmo período, centradas na análises quantitativas de curto-médio prazo dos efeitos e usos dos contéudos das mensagens, Innis e McLuhan, optaram por formas ensaísticas, de história das civilizações, mobilizando recursos da cultura, da literatura, da economia e da tecnologia, que privilegiam a reflexão de longo prazo (mudanças na ordem social e no sensorium operadas à escala histórica, civilizacional). Embora esta perspectiva de largo alcance temporal tenha tido diversos cultores durante o século XIX e XX, como são exemplos Auguste Comte, Karl Marx, Arnold Toynbee, Oswald Spengler, entre outros, nos estudos de comunicação, ela tinha muito pouca tradição. O impacto destes teóricos radica na introdução na investigação em comunicação e media de uma problemática que durante muito tempo se encontrou ausente da quer na Europa, quer na América do Norte (particularmente nos EUA) que é a relação entre os modos (meios, técnicas) de comunicação e a sociedade. O seu maior contributo para os estudos sociológicos da comunicação foi chamar a atenção para os efeitos a longo prazo das formas técnicas de comunicação na sociedade e na cultura. Pela primeira vez, se questionou a dimensão técnica da comunicação. Ou seja, exploraram a ideia de que as técnicas de comunicação são responsáveis pela configuração das sociedades e da cultura; que os processos de comunicação e as instituições a eles associadas têm efeitos penetrantes na natureza das sociedades e no curso da sua história, erguendo novas constelações culturais; mudam os meios/os suportes técnicos através dos quais comunicamos, muda a cultura, muda a sociedade. Defendem que a história da comunicação é uma das grandes chave da historia universal, o que os faz ler a história universal à luz da história da comunicação. Há quem afirme que exploram uma certa determinação comunicacional da sociedade (perspectiva que já se encontrava presente nos economistas políticos alemães e nos primeiros sociólogos americanos, como Albion Small, William Sumner e Edward Ross, entre outros), segundo a qual a sociedade é um organismo, mas muito mais complexo do que propunha Herbert Spencer, um organismo com formas de consciência forjadas através da comunicação. Eu diria que isto é basicamente aquilo que une estes dois autores, tudo o resto tende a afastá-los como vou tentar mostrar de seguida.

B and Delta hepatitis virus infection in a population of West Africa

Among the 424 serum samples examined, the prevalence of hepatitis virus infection turned out to be 89.6%, with 15.6% of HBsAg positivity. Some of the samples belonged to an afferent population and some other to workers of a West Africa rural hospital (Pop. Rep. of Benin). 27.3% of the positive subjects presented active replication of the virus, shown by the presence of HBeAg. Among the HBcAb positive subjects the anti-delta antibodies showed a positivity frequency of 19.7%. HBsAg presence in 15% of pregnant women suggested the importance of HBV mother-foetal transmission in the district. The examined results can be compared with those obtained in other African areas, with similar socio-economic conditions.

Unsupervised automatic music genre classification

Trabalho apresentado no âmbito do Mestrado em Engenharia Informática, como requisito parcial para obtenção do grau de Mestre em Engenharia Informática

Persistent organic pollutant levels in human visceral and subcutaneous adipose tissue in obese individuals - Depot differences and dysmetabolism implications

Background: The role of persistent organic pollutants (POPs) with endocrine disrupting activity in the aetiology of obesity and other metabolic dysfunctions has been recently highlighted. Adipose tissue (AT) is a common site of POPs accumulation where they can induce adverse effects on human health. Objectives: To evaluate the presence of POPs in human visceral (vAT) and subcutaneous (scAT) adipose tissue in a sample of Portuguese obese patients that underwent bariatric surgery, and assess their putative association with metabolic disruption preoperatively, as well as with subsequent body mass index (BMI) reduction. Methods: AT samples (n=189) from obese patients (BMI ≥35) were collected and the levels of 13 POPs were determined by gas chromatography with electron-capture detection (GC-ECD). Anthropometric and biochemical data were collected at the time of surgery. BMI variation was evaluated after 12 months and adipocyte size was measured in AT samples. Results: Our data confirm that POPs are pervasive in this obese population (96.3% of detection on both tissues), their abundance increasing with age (RS=0.310, p<0.01) and duration of obesity (RS=0.170, p<0.05). We observed a difference in AT depot POPs storage capability, with higher levels of ΣPOPs in vAT (213.9±204.2 compared to 155.1±147.4 ng/g of fat, p<0.001), extremely relevant when evaluating their metabolic impact. Furthermore, there was a positive correlation between POP levels and the presence of metabolic syndrome components, namely dysglycaemia and hypertension, and more importantly with cardiovascular risk (RS=0.277, p<0.01), with relevance for vAT (RS=0.315, p<0.01). Finally, we observed an interesting relation of higher POP levels with lower weight loss in older patients. Conclusion: Our sample of obese subjects allowed us to highlight the importance of POPs stored in AT on the development of metabolic dysfunction in a context of obesity, shifting the focus to their metabolic effects and not only for their recognition as environmental obesogens.

Caracterização de resíduos plásticos na Costa Portuguesa – será um microproblema?

Dissertação apresentada na Faculdade de Ciências e Tecnologia para a obtenção do grau de Mestre em Engenharia do Ambiente, Perfil Engenharia Ecológica

Julião Sarmento dentro do texto. Reflexões sobre os encontros e desencontros da crítica com a sua obra

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em História de Arte Contemporânea

Arranjo instrumental na aula de educação musical. Uma reflexão sobre os contributos pedagógicos da metodologia Orff no contexto do currículo do ensino básico

Relatório apresentado para cumprimento dos requisitos necessários a obtenção do grau de Mestre em Ensino de Educação Musical no 2º e 3º Ciclo do Ensino Básico