Distribution of marine invertebrate larvae in the southern Kara Sea (Russian Arctic)

Within the generally oligotroph Arctic marine environment river outlets are favoured by many planktonic and benthic organisms due to their high input of organic carbon. The retention of pelagic larvae within nursery grounds and/or the ability to return to their parental grounds prior to settlement is one important factor for the persistence of benthic communities in such river influenced areas. The southern Kara Sea is strongly controlled by high freshwater inputs from the Ob and Yenisei Rivers, which create a pronounced bi-layered pycnocline with a warm fresh/brackish water layer on top and a cold high saline marine layer below. The dispersal of five meroplanktonic species and settled juveniles (the brittle star Ophiocten sericeum, and the polychaetes Micronephtys minuta, Nereimyra aphroditoides, Phyllodoce groenlandica and Prionospio cirrifera) in relation to the adult distribution patterns was investigated. For all apart from P. cirrifera the highest densities of larvae were found in the upper brackish water layer. To assess size-at-settlement, the body sizes of larvae and newly settled juveniles were estimated and compared. Dispersal patterns ranged from virtually no adaption to river run-off as in the common, stenohaline O. sericeum and M. minuta (7 ind./m**3, 459 µm) to local retention as in N. aphroditoides (7 ind./m**3, 541 µm) and P. groenlandica (0.5 ind./m**3, 1121 µm) retained by horizontal eddies created by the outflow. Adults of P. cirrifera, which were exclusively restricted to the estuary of the Yenisei River, showed a well adapted reproductive behaviour to ensure a high retention potential of their progenies. The larvae (1.5 ind./m**3, 1513 µm) were only present in the lower water layers, most probably taking advantage of the prevailing near bottom counter current retaining them within their hatching areas.

Gametogenic cycle of Mesodesma donacium

Large-scale environmental patterns in the Humboldt Current System (HCS) show major changes during strong El Niño episodes, leading to the mass mortality of dominant species in coastal ecosystems. Here we explore how these changes affect the life-history traits of the surf clam Mesodesma donacium. Growth and mortality rates under normal temperature and salinity were compared to those under anomalous (El Niño) higher temperature and reduced salinity. Moreover, the reproductive spatial-temporal patterns along the distribution range were studied, and their relationship to large-scale environmental variability was assessed. M. donacium is highly sensitive to temperature changes, supporting the hypothesis of temperature as the key factor leading to mass mortality events of this clam in northern populations. In contrast, this species, particularly juveniles, was remarkably tolerant to low salinity, which may be related to submarine groundwater discharge in Hornitos, northern Chile. The enhanced osmotic tolerance by juveniles may represent an adaptation of early life stages allowing settlement in vacant areas at outlets of estuarine areas. The strong seasonality in freshwater input and in upwelling strength seems to be linked to the spatial and temporal patterns in the reproductive cycle. Owing to its origin and thermal sensitivity, the expansion and dominance of M. donacium from the Pliocene/Pleistocene transition until the present seem closely linked to the establishment and development of the cold HCS. Therefore, the recurrence of warming events (particularly El Niño since at least the Holocene) has submitted this cold-water species to a continuous local extinction-recolonization process.

Hydrochemistry, water level, and discharge of water from Samoylov Island, Lena Delta, northeastern Siberia, in 2008

Although ponds make up roughly half of the total area of surface water in permafrost landscapes, their relevance to carbon dioxide emissions on a landscape scale has, to date, remained largely unknown. We have therefore investigated the inflows and outflows of dissolved organic and inorganic carbon from lakes, ponds, and outlets on Samoylov Island, in the Lena Delta of northeastern Siberia in September 2008, together with their carbon dioxide emissions. Outgassing of carbon dioxide (CO2) from these ponds and lakes, which cover 25% of Samoylov Island, was found to account for between 74 and 81% of the calculated net landscape-scale CO2 emissions of 0.2-1.1 g C/m**2/d during September 2008, of which 28-43% was from ponds and 27-46% from lakes. The lateral export of dissolved carbon was negligible compared to the gaseous emissions due to the small volumes of runoff. The concentrations of dissolved inorganic carbon in the ponds were found to triple during freezeback, highlighting their importance for temporary carbon storage between the time of carbon production and its emission as CO2. If ponds are ignored the total summer emissions of CO2-C from water bodies of the islands within the entire Lena Delta (0.7-1.3 Tg) are underestimated by between 35 and 62%.

Age determination and model of sediment core RAPiD-15-4P

Greenland ice core records indicate that the last deglaciation (~7-21 ka) was punctuated by numerous abrupt climate reversals involving temperature changes of up to 5°C-10°C within decades. However, the cause behind many of these events is uncertain. A likely candidate may have been the input of deglacial meltwater, from the Laurentide ice sheet (LIS), to the high-latitude North Atlantic, which disrupted ocean circulation and triggered cooling. Yet the direct evidence of meltwater input for many of these events has so far remained undetected. In this study, we use the geochemistry (paired Mg/Ca-d18O) of planktonic foraminifera from a sediment core south of Iceland to reconstruct the input of freshwater to the northern North Atlantic during abrupt deglacial climate change. Our record can be placed on the same timescale as ice cores and therefore provides a direct comparison between the timing of freshwater input and climate variability. Meltwater events coincide with the onset of numerous cold intervals, including the Older Dryas (14.0 ka), two events during the Allerød (at ~13.1 and 13.6 ka), the Younger Dryas (12.9 ka), and the 8.2 ka event, supporting a causal link between these abrupt climate changes and meltwater input. During the Bølling-Allerød warm interval, we find that periods of warming are associated with an increased meltwater flux to the northern North Atlantic, which in turn induces abrupt cooling, a cessation in meltwater input, and eventual climate recovery. This implies that feedback between climate and meltwater input produced a highly variable climate. A comparison to published data sets suggests that this feedback likely included fluctuations in the southern margin of the LIS causing rerouting of LIS meltwater between southern and eastern drainage outlets, as proposed by Clark et al. (2001, doi:10.1126/science.1062517).

A three-dimensional dynamical model of Amundsenisen icefield, Svalbard.

Amundsenisen is an ice field, 80 km2 in area, located in Southern Spitsbergen, Svalbard. Radio-echo sounding measurements at 20 MHz show high intensity returns from a nearly flat basal reflector at four zones, all of them with ice thickness larger than 500m. These reflections suggest possible subglacial lakes. To determine whether basal liquid water is compatible with current pressure and temperature conditions, we aim at applying a thermo mechanical model with a free boundary at the bed defined as solution of a Stefan problem for the interface ice-subglaciallake. The complexity of the problem suggests the use of a bi-dimensional model, but this requires that well-defined flowlines across the zones with suspected subglacial lakes are available. We define these flow lines from the solution of a three-dimensional dynamical model, and this is the main goal of the present contribution. We apply a three-dimensional full-Stokes model of glacier dynamics to Amundsenisen icefield. We are mostly interested in the plateau zone of the icefield, so we introduce artificial vertical boundaries at the heads of the main outlet glaciers draining Amundsenisen. At these boundaries we set velocity boundary conditions. Velocities near the centres of the heads of the outlets are known from experimental measurements. The velocities at depth are calculated according to a SIA velocity-depth profile, and those at the rest of the transverse section are computed following Nye’s (1952) model. We select as southeastern boundary of the model domain an ice divide, where we set boundary conditions of zero horizontal velocities and zero vertical shear stresses. The upper boundary is a traction-free boundary. For the basal boundary conditions, on the zones of suspected subglacial lakes we set free-slip boundary conditions, while for the rest of the basal boundary we use a friction law linking the sliding velocity to the basal shear stress,in such a way that, contrary to the shallow ice approximation, the basal shear stress is not equal to the basal driving stress but rather part of the solution.

Coastal Impacts Around Guadiaro River Mouth (Spain)

The “Port of Sotogrande” Beach (San Roque, Cadiz, Spain) has suffered significant erosion and changes since the construction of the marina and port of Sotogrande (San Roque, Cadiz, Spain). This paper reviews the dynamical processes on Guadiaro front and establishes relationship between them. It sets from a comparative evolution of the Alboran Sea Coast outlets and bays since the Little Ice Age, which shows that the Guadiaro estuary has remained functional while all other Alboran fluvial estuaries silted to son. The study shows the evidences of the coastal impacts around the mouth, even further than mouth littoral barriers, of the port infrastructures; and it provides new elements to understand the dynamical processes on the mouth and surroundings as well. That should be fundamental for shore protection along the whole coastal stretch

Implantación de un sistema de depósito, devolución y retorno en el mercado retail español

“Quien contamina, paga“, con esta premisa surgió la idea de este Trabajo Fin de Máster, en adelante TFM, cuyo objetivo era identificar medidas alternativas reales para una optimización del proceso actual de gestión de residuos sólidos urbanos ante una sociedad cada vez más superpoblada y con mayores ratios de consumo. Cada español genera anualmente un volumen de 485 Kg de residuos, de los cuales únicamente el 33 % son reciclados y pueden volver a un flujo normal de uso, especialmente preocupante durante los últimos años es el auge de los productos envasados, tanto de bebidas como de alimentos , cuya utilización se ha duplicado en la última década. La motivación de este trabajo Fin de Máster ha sido la de poner de manifiesto que la sostenibilidad con el medioambiente puede ir de la mano de la rentabilidad y del progreso. Durante este TFM se ha estudiado y analizado la viabilidad económica de implantación de un nuevo modelo de depósito, devolución y retorno en el mercado retail español y como con la adopción de este nuevo sistema se pueden lograr beneficios tanto para el propio minorista, como para el medio ambiente con ratios de reciclado superiores al 98%. La preocupación por el medio ambiente empieza a ser una constante entre los consumidores españoles y dicha preocupación comienza a ser influenciadora en las decisiones de compra (productos eco, sostenibilidad…). Nuestra propuesta consiste en dotar a los principales distribuidores del sector retail español de un sistema de depósito, devolución y retorno para envases de bebidas capaz de generar diferenciación, innovación y rentabilidad frente a la competencia. Dicho sistema consiste en pagar un depósito por cada envase de bebida que se adquiera y su correspondiente devolución en la siguiente compra, una vez que se devuelva vacío al establecimiento. Para ello se ha analizado el sector de la distribución en España, especialmente la distribución de bebidas. Se trata de un sector muy competitivo, que presenta varios formatos en función del tamaño del establecimiento (Hipermercados, Supermercados, tiendas tradicionales). Las principales empresas distribuidoras (Carrefour, Mercadona, Alcampo, Eroski, DIA) se encuentran en procesos de cambios estratégicos para lograr atraer a más consumidores hacia sus tiendas, por lo que nuestra propuesta podrá añadir valor a la hora de influenciar en la decisión del lugar de compra. En nuestro caso, nos dirigiremos principalmente a las grandes empresas distribuidoras, Hipermercados de más de 2.500 m2 ,que cuentan con más de 500 puntos de venta y distribución donde existe la posibilidad real de implantar un SDDR. Además se ha realizado un estudio de mercado sobre la influencia de dicho sistema en el consumidor final, donde se ha detectado dos segmentos principales cuya decisión de compra se vería muy influenciada por la implantación de un SDDR, un segmento Sénior, entre 45-54 años, preocupados por el medio ambiente y con poder adquisitivo suficiente como para que el pago del depósito no sea bloqueante, y un segmento Junior, entre 18-24 años, también muy concienciado el medio ambiente, de capacidad económica menor pero qué influye en la decisión de compra de sus progenitores. Para llevar a cabo este plan de negocio será necesario una inversión inicial de 57.000 €, con unas expectativas de recuperación de dicha inversión en el primer año y una TIR del 56%, presentando un VAN de 127.961 € para los 7 años de vida del proyecto. Para dar a conocer a los clientes del Hipermercado los beneficios de utilizar un sistema SDDR, se realizarán campañas de marketing a través de diferentes canales, promociones de apertura, acciones de marketing exteriores y planes de fidelización. La organización e implantación en el Hipermercado será muy sencilla con roles claramente diferenciados, únicamente involucraría a unos 9 recursos definidos y en aproximadamente 3 meses desde el inicio del proyecto ya se podría ofertar dicho servicio a los clientes del Hipermercado. Además se han analizado los principales riesgos a los que se enfrentaría el negocio, ponderándose en una matriz impacto-probabilidad. Se han establecido medidas correctoras en el caso que dicho riesgo aflore. Habrá que tener especialmente precaución con la pérdida de ventas durante el arranque del negocio en el caso que esto ocurra, por lo que se deberá controlar el gasto, fomentar la captación de clientes y mantener un fondo de maniobra lo suficientemente elevado como para absorber dicho riesgo.---ABSTRACT---“Polluters pay”, with this premise this TFM aimed at identifying real alternative measures for optimization of the current process of solid waste management in a crowded society and with greater consumption ratios. Spaniards generates an annual volume of 485 kg of waste; only 33 % are recycled and can return to a normal flow. Specially concern is the increased of packaged product in recent years, mainly drink and food, their use has been duplicated in the last decade. The motivation for this Thesis was to highlight that sustainability, profitability and progress can go together. During this TFM has been studied and analyzed the economic feasibility of implementing a new model of deposit , refund and return in the Spanish retail market and as with the adoption of this new system can achieve benefits for the retailer itself therefore to the environment with ratios above 98% recycled. Concern for the environment is becoming a constant among Spanish consumers , and this concern is becoming influencer in purchasing decisions ( eco, sustainability ... ) . Our proposal is to provide the main distributors of the Spanish retail sector a system of deposit, refund and return for beverage containers capable of generating differentiation, innovation and profitability over the competition. This system is to pay a deposit for each beverage container they purchase and their corresponding return in the next purchase, once they return empty to the establishment. For this we have analyzed the distribution sector in Spain, especially the distribution of beverages. This is a highly competitive industry, which features various formats depending on the size of establishments (hypermarkets, supermarkets, traditional shops). The main distribution companies (Carrefour, Mercadona, Alcampo, Eroski, DIA) are in the process of strategic changes in order to attract more consumers to their stores, so that our approach can add value in influencing the decision of place shopping. In our case, we will go mainly to large distributors, Hypermarkets of over 2,500 m2, which have more than 500 outlets and distribution where there is a real possibility of implementing a SDDR. It has also conducted a market study on the influence of that system on the final consumer, which has detected two main segments whose purchasing decisions would be greatly influenced by the introduction of a SDDR, a Senior segment, 45-54 years concerned about the environment and purchasing power enough that the deposit is not blocking, and a Junior Segment, aged 18-24, also concern with environment, lower economic capacity but what influences the decision purchase of their parents). To carry out this business plan will require an initial investment of 57,000 €, with expectations of recovery of such investment in the first year and an IRR of 56%, with an NPV of € 127,961 for the 7 years of the project . To publicize hypermarket customers the benefits of using a SDDR system, marketing campaigns conducted through different channels, opening promotions, marketing activities and external loyalty schemes. The organization and implementation in the Hypermarket is easy with distinct roles, involve only about 9 resourced and in about 3 months from the start of the project and could offer this service to customers in the hypermarket. We have also analyzed the main risks and established corrective measures to surface that risk . We should take caution with lost sales during startup of the business, such as control spending, customer retention and maintaining enough working capital.

Reducing the impact of EV charging on the electric grid

One of the main objectives of European Commission related to climate and energy is the well-known 20-20-20 targets to be achieved in 2020: Europe has to reduce greenhouse gas emissions of at least 20% below 1990 levels, 20% of EU energy consumption has to come from renewable resources and, finally, a 20% reduction in primary energy use compared with projected levels, has to be achieved by improving energy efficiency. In order to reach these objectives, it is necessary to reduce the overall emissions, mainly in transport (reducing CO2, NOx and other pollutants), and to increase the penetration of the intermittent renewable energy. A high deployment of battery electric (BEVs) and plug-in hybrid electric vehicles (PHEVs), with a low-cost source of energy storage, could help to achieve both targets. Hybrid electric vehicles (HEVs) use a combination of a conventional internal combustion engine (ICE) with one (or more) electric motor. There are different grades of hybridation from micro-hybrids with start-stop capability, mild hybrids (with kinetic energy recovery), medium hybrids (mild hybrids plus energy assist) and full hybrids (medium hybrids plus electric launch capability). These last types of vehicles use a typical battery capacity around 1-2 kWh. Plug in hybrid electric vehicles (PHEVs) use larger battery capacities to achieve limited electric-only driving range. These vehicles are charged by on-board electricity generation or either plugging into electric outlets. Typical battery capacity is around 10 kWh. Battery Electric Vehicles (BEVs) are only driven by electric power and their typical battery capacity is around 15-20 kWh. One type of PHEV, the Extended Range Electric Vehicle (EREV), operates as a BEV until its plug-in battery capacity is depleted; at which point its gasoline engine powers an electric generator to extend the vehicle's range. The charging of PHEVs (including EREVs) and BEVs will have different impacts to the electric grid, depending on the number of vehicles and the start time for charging. Initially, the lecture will start analyzing the electrical power requirements for charging PHEVs-BEVs in Flanders region (Belgium) under different charging scenarios. Secondly and based on an activity-based microsimulation mobility model, an efficient method to reduce this impact will be presented.

Metodología para la gestión integral de las presas de laminación de avenidas y su aplicación a la cuenca hidrográfica del Segura

En el levante español se producen periódicamente intensos aguaceros (gota fría), que generan grandes riadas, desbordándose los cauces y asolando los campos y las ciudades, ocasionando graves daños en la economía local y con frecuencia, por desgracia, víctimas personales. La Confederación Hidrográfica del Segura ha puesto en marcha un vasto sistema de protección, conocido como Plan de Defensa contra Avenidas, del que ya se encuentran en explotación un conjunto de presas cuyo objetivo prioritario es la laminación de las avenidas. Las presas de laminación ubicadas en esta área mediterránea son estructuras muy singulares, al estar ubicadas en cuencas extremadamente secas, con alta pendiente, rápida respuesta, picos altos de caudal, y gran poder erosivo del flujo. Las aguas arrastran en suspensión un alto porcentaje de aporte sólido y flotantes, que quedan retenidos en el embalse, aterrándolo e inutilizando los desagües. En esta tesis doctoral se analizan los criterios de actuación para la gestión de estas presas de laminación, con objeto de que se puedan introducir en las Normas de Explotación innovaciones destinadas a mejorar la eficiencia del conjunto, de manera que se consiga la máxima protección posible y al mismo tiempo se puedan aprovechar las aguas, sin menoscabo de su objetivo prioritario, para otros fines complementarios. Como consecuencia del trabajo realizado se indica la conveniencia de establecer un conjunto de normas de actuación comunes a todas las presas del sistema, como es la estrategia de recibir siempre a los hidrogramas de la riada con las compuertas de los desagües de fondo cerrados, o la conveniencia de que en todas las presas se dispongan compuertas en estos órganos. También se dictan recomendaciones en la gestión del vaciado, para conseguir el máximo aprovechamiento del agua, introduciendo el concepto innovador de los trasvases virtuales. Asimismo, se analiza la conveniencia de fijar normas diferenciales específicas atendiendo a las peculiaridades de cada presa, en cuanto se refiere al nivel máximo de explotación, al cumplimiento de los condicionantes ambientales, al mantenimiento de la calidad del agua, y a otros aspectos singulares que caracterizan a cada uno de estos embalses. The Spanish Mediterranean region hydrology is characterised by low rainfall, but concentrated in extreme convective events. Those heavy rains and storms lead to large, flash-floods which cause devastation of fields, villages and, unfortunately, loss of lives. Segura River Basin Authority has developed an ambitious plan for flood protection and control that is constituted by a system of flood protection dams, river channelling, river diversions diversions and levees. Flood protection dams placed on this area, are distinct structures, as they are located on extremely dry basins, with high slopes and limited vegetal covering. These facts, along with the very high rainfall intensity, are determinants of a rapid response and a very erosive flow. The flow transports a large rate of solids in suspension, and also debris, which many times block and clog the outlets intakes, disabling them. In such a case, the dam would be inoperative, in an emergency state and remedial measures should be taken. This PhD thesis analyses the flood protection dams operation criteria, for providing managers a methodology to analyse each individual case and also the flood protection system as a whole. Additionally practical rules and recommendations, to cope with the objectives of dam safety, flood protection and water resources use, are given. The rules consider the specific differences and risks that may be faced by the dams. To that end, they were grouped, depending on their characteristics: allowance for permanent water storage, environmental restrictions, water quality, geotechnical problems, type of structure, etc. As a result of this research, it is recommended to design these dams with valves for regulating the bottom outlets. The availability of valves is linked with the routing strategy of receiving flood with the outlets closed. This has been shown as the best measure to prevent clogging and opens the possibility of storing temporarily the water, making then a scheduled emptying of the reservoir, which could be computed as a virtual transfer to the regulating dams. Emptying should be done in accordance with the situation of the other dams of the system and of the rivers downstream. This detention time would make possible also the beginning of the sedimentation process which is necessary for using the water with the modern irrigation systems that are in use in this area.

Pulsatile blood flow interaction with arterial walls of aorta : autoregulation and impedance pressure boundary condition and its biomedical applications

Para las decisiones urgentes sobre intervenciones quirúrgicas en el sistema cardiovascular se necesitan simulaciones computacionales con resultados fiables y que consuman un tiempo de cálculo razonable. Durante años los investigadores han trabajado en diversos métodos numéricos de cálculo que resulten atractivos para los cirujanos. Estos métodos, precisos pero costosos desde el punto de vista del coste computacional, crean un desajuste entre la oferta de los ingenieros que realizan las simulaciones y los médicos que operan en el quirófano. Por otra parte, los métodos de cálculo más simplificados reducen el tiempo de cálculo pero pueden proporcionar resultados no realistas. El objetivo de esta tesis es combinar los conceptos de autorregulación e impedancia del sistema circulatorio, la interacción flujo sanguíneo-pared arterial y modelos geométricos idealizados tridimensionales de las arterias pero sin pérdida de realismo, con objeto de proponer una metodología de simulación que proporcione resultados correctos y completos, con tiempos de cálculo moderados. En las simulaciones numéricas, las condiciones de contorno basadas en historias de presión presentan inconvenientes por ser difícil conocerlas con detalle, y porque los resultados son muy sensibles ante pequeñas variaciones de dichas historias. La metodología propuesta se basa en los conceptos de autorregulación, para imponer la demanda de flujo aguas abajo del modelo en el ciclo cardiaco, y la impedancia, para representar el efecto que ejerce el flujo en el resto del sistema circulatorio sobre las arterias modeladas. De este modo las historias de presión en el contorno son resultados del cálculo, que se obtienen de manera iterativa. El método propuesto se aplica en una geometría idealizada del arco aórtico sin patologías y en otra geometría correspondiente a una disección Stanford de tipo A, considerando la interacción del flujo pulsátil con las paredes arteriales. El efecto de los tejidos circundantes también se incorpora en los modelos. También se hacen aplicaciones considerando la interacción en una geometría especifica de un paciente anciano que proviene de una tomografía computarizada. Finalmente se analiza una disección Stanford tipo B con tres modelos que incluyen la fenestración del saco. Clinicians demand fast and reliable numerical results of cardiovascular biomechanic simulations for their urgent pre-surgery decissions. Researchers during many years have work on different numerical methods in order to attract the clinicians' confidence to their colorful contours. Though precise but expensive and time-consuming methodologies create a gap between numerical biomechanics and hospital personnel. On the other hand, simulation simplifications with the aim of reduction in computational time may cause in production of unrealistic outcomes. The main objective of the current investigation is to combine ideas such as autoregulation, impedance, fluid-solid interaction and idealized geometries in order to propose a computationally cheap methodology without excessive or unrealistic simplifications. The pressure boundary conditions are critical and polemic in numerical simulations of cardiovascular system, in which a specific arterial site is of interest and the rest of the netwrok is neglected but represented by a boundary condition. The proposed methodology is a pressure boundary condition which takes advantage of numerical simplicity of application of an imposed pressure boundary condition on outlets, while it includes more sophisticated concepts such as autoregulation and impedance to gain more realistic results. Incorporation of autoregulation and impedance converts the pressure boundary conditions to an active and dynamic boundary conditions, receiving feedback from the results during the numerical calculations and comparing them with the physiological requirements. On the other hand, the impedance boundary condition defines the shapes of the pressure history curves applied at outlets. The applications of the proposed method are seen on idealized geometry of the healthy arotic arch as well as idealized Stanford type A dissection, considering the interaction of the arterial walls with the pulsatile blood flow. The effect of surrounding tissues is incorporated and studied in the models. The simulations continue with FSI analysis of a patient-specific CT scanned geometry of an old individual. Finally, inspiring of the statistic results of mortality rates in Stanford type B dissection, three models of fenestrated dissection sac is studied and discussed. Applying the developed boundary condition, an alternative hypothesis is proposed by the author with respect to the decrease in mortality rates in patients with fenestrations.

El perfil de los consumidores de productos de comercio justo. Análisis de las variables que influyen en su intención de compra

El consumo mundial, impulsor del desarrollo y crecimiento económico de los pueblos, no ha sido igual para todas las naciones, ya que sus efectos han sido diferentes para los ciudadanos de los países del Norte y los del Sur, principalmente por dos razones: una, porque han originado complejos y diferentes estilos de vida y aspiraciones, lo que ha originado grandes diferencias entre los individuos de unos y otros países, y, dos, por su falta de valores sociales y éticos. Ante esta situación, la sociedad en su conjunto debe tomar conciencia de este hecho, y a través de un consumo responsable y de un mayor conocimiento de las relaciones comerciales entre los pueblos, debe optar por consumir productos elaborados bajo criterios de justicia y equidad. Para ayudar a alcanzar estos objetivos de equidad, solidaridad, justicia y ética, nació el Comercio Justo, que, en el caso de España, llegó con veinte años de retraso en la década de los ochenta. Aunque a día de hoy sus ventas crecen a un buen ritmo, siguen siendo inferiores al resto de los países europeos, por cuatro razones: (1) el desconocimiento que la mayoría de los potenciales consumidores tienen de este movimiento social; (2) la dificultad de acceder a los productos que comercializan; (3) el poco impulso que se ofrece desde las Administraciones Públicas; y, (4) porque hay pocas investigaciones en las que se haya analizado el Comercio Justo desde la perspectiva de la demanda, lo que ha implicado que no haya un conocimiento profundo sobre los consumidores de este tipo de productos y sobre sus motivaciones de compra. En base a todo lo expuesto, el presente trabajo se concibe como un estudio exploratorio, que tiene como objetivo principal analizar el perfil de los consumidores y no consumidores de productos de Comercio Justo, sus motivaciones de compra y no compra, así como las variables que influyen en la intención de compra futura, tanto en el segmento de consumidores actuales, como en el segmento de no consumidores de este tipo de productos. Para la realización de este trabajo, se ha utilizado, por una parte, una metodología cualitativa, que ha permitido acceder a la información sobre las opiniones y actitudes que intervienen en los procesos de decisión de compra; y, por otra, una metodología cuantitativa, a través de una encuesta online dirigida a 6.500 individuos, que ha permitido tener información, a través de sendos análisis descriptivos univariante y bivariante, de los individuos encuestados sobre el objeto del estudio. Para validar los modelos y contrastar las hipótesis planteadas, se ha utilizado el análisis de fiabilidad y validación de las escalas de medición seleccionadas (Alpha de Cronbach); el análisis factorial exploratorio, para comprobar la dimensionalidad y validez convergente de las escalas de medida; el análisis factorial confirmatorio, para validar la idoneidad de los modelos de medida propuestos; la regresión logística, para comprobar la validez del modelo general de la probabilidad de la compra o no compra de productos de Comercio Justo; y la regresión lineal múltiple, para comprobar la validez de los modelos específicos de intención de compra futura en los segmentos de compradores y de no compradores. Para realizar todos estos análisis, se han utilizado las herramientas informáticas SPSS v21 y AMOS. Las principales conclusiones del trabajo son: (1) que se deben establecer unos criterios claros que definan quién es quién en el movimiento de Comercio Justo, sus fines, sus objetivos, los productos que comercializan, así como su funcionamiento y desarrollo en España; (2) que, a pesar de las grandes ventajas y posibilidades del Comercio Justo, hay una falta de demanda de estos productos por parte de los consumidores responsables, debido principalmente a la falta de información-comunicación sobre el propio movimiento, y, muy especialmente, a la falta de información sobre los productos, los canales de comercialización, las políticas de precios, las políticas de comunicación, etc., y a la necesidad de que estos productos estén accesibles en los lugares donde los consumidores hacen su compra habitual; y (3) que el Comercio Justo español debe afrontar una serie de desafíos, como son la coordinación entre las diferentes organizaciones que participan en su desarrollo; la sensibilización de los consumidores; la creación de una imagen de marca que defina de una manera clara y sencilla qué es el Comercio Justo; la orientación al cliente y no al producto; y extender la red de comercialización de productos de Comercio Justo a los canales donde los consumidores hacen su compra habitualmente. ABSTRACT Global consumption, the driver of economic growth and development of nations, is not the same for all countries, since its effects have been different on people coming from the North or the South. This is due mainly to two reasons: firstly, because they have developed complex and different lifestyles and aspirations, which have led to significant differences between individuals of one country and another and secondly, because they lack social and ethical values. Given this situation, society as a whole should be aware of this fact, and through responsible consumption and a greater knowledge of trade relations between countries, should opt for consuming products produced with criteria of justice and equity. Fair Trade began as a way to help reach these goals of equity, solidarity, justice and ethics. In the case of Spain it did not start until 20 years later, in the eighties. Although today sales of Fair Trade products are growing at a good rate, they are still below that of other European countries, for four reasons: (1) unawareness of this social movement; (2) the difficult access to these products; (3) insufficient government support; (4) the limited research carried out to analyse Fair Trade from the perspective of demand, resulting in a lack of knowledge about this type of consumer and their purchasing motivations. Based on the above, the present study is designed as an exploratory investigation, aimed at analyzing the profile of consumers and non-consumers of Fair Trade, their motivations for buying and not buying, as well as the variables which influence future purchase intention in both the current consumer segment, and the non-user segment of such products. To carry out this study we have used, on the one hand, a qualitative methodology, to obtain information about the views and attitudes involved in the purchase decision process; and on the other, a quantitative methodology, through an online survey of 6,500 individuals, which provided information through two separate univariate and bivariate descriptive analysis, of the individuals interviewed about the object of this study. To validate the models and contrast hypotheses, we have used the reliability analysis and validation of the selected measurement scales (Cronbach's Alpha); exploratory factor analysis to verify the dimensionality and convergent validity of the measurement scales; confirmatory factor analysis to validate the adequacy of the models of measurement proposed; logistic regression, to verify the validity of the general model of the probability of buying or not buying Fair Trade products; and multiple linear regression to test the validity of specific models in future purchase intention in the segments of buyers and non-buyers. To carry out these analyses, we used SPSS v21 software tools and AMOS. The principal conclusions of the investigation are: (1) the need to establish clear criteria which define who is who in the Fair Trade movement, its goals, objectives, the products they sell, as well as its operation and development in Spain; (2) that despite the great advantages and possibilities of Fair Trade, there is a lack of demand for these products by responsible consumers, mainly due to the lack of information-communication about the movement itself, and especially on the range of products, sales channels, pricing policies, communication policies, etc., and the need for these products to be available in places where consumers make their usual purchase; and (3) that Spanish Fair Trade must address a number of challenges such as: coordination between the different organizations involved in trade development; consumer awareness; creation of a brand image that defines in a clear and simple way what Fair Trade is; focus on the customer rather than the product; and expansion of the network of Fair Trade sales outlets to include the channels where consumers usually make their purchases.

An Evening with Janks Mortons, Actor, Educator, Activist

Janks Morton is a creator of media and entertainment for African Americans and consumers of Black culture. These projects challenge audiences to make a difference in their lives and communities with a series of thought-provoking pro-social initiatives through music, film, traditional and alternative media outlets.

O tempo e o direito na sociedade de informação : o limite temporal para a manutenção de informações pessoais como corolário de um direito da personalidade

O tempo sempre desempenhou relevante função de estabilização das relações jurídicas e decantação da memória individual, fazendo com que a divulgação de fatos desagradáveis ou sacrificantes aos direitos da personalidade tivessem, salvo em eventos excepcionais de ordem histórica, por força de um processo natural de erosão da sua relevância e atualidade, como destino o esquecimento. Esse mecanismo natural, capaz de assegurar o exercício de novas escolhas e o livre desenvolvimento da personalidade, restou substancialmente mitigado pelo surgimento da sociedade de informação, com a expansão dos veículos de comunicação de massa e a rede mundial de computadores, com sua memória infalível, a permitir a divulgação e o amplo acesso, com idêntica facilidade, a informações atuais e do passado. Releva, portanto, discutir a existência de um direito ao esquecimento, como forma de estabelecer, salvo em situações de inequívoco interesse público, uma limitação temporal para a manutenção e para a divulgação de fatos passados e referências pessoais, fora de um contexto de atualidade, capazes de macular a honra, o bom nome, a privacidade e a integridade psicológica das pessoas, bem como a possibilidade de que a ofensa injustificada a um direito da personalidade protegido pelo esquecimento, praticada com abuso do direito de informar, seja considerada ilícita.

No other choice but co-operation. The background of Lithuania's and Latvia's relations with Belarus. OSW Commentary No. 99, 2013-01-04

For years now Belarus has been a key economic partner for Lithuania and Latvia. These two Baltic states have well-developed port infrastructure and thus provide what are the geographically closest and also the cheapest exit to international outlets for Belarusia’s petrochemical and chemical industries, both of which are export-oriented. As a result, the transit of Belarusian goods is one of the major sources of income for the state budgets of the two countries. This economic interdependence has affected the stance Riga and Vilnius take on Minsk at the EU forum. When in February and March 2012 the Council of the European Union was resolving the issue of imposing economic sanction on selected Belarusian companies which backed Alyaksandr Lukashenka’s regime, this triggered a discussion on what the point of such measures is and on possible economic losses in Lithuania and Latvia. As a result of firm resistance from Latvia (which was backed by Slovenia), the Council removed those companies which were most strongly engaged in co-operation with Latvian partners from the list of those to be covered with economic sanctions. Lithuania, which is more critical of the political situation in Belarus, did not express its official opposition to the sanctions. Despite some differences in the policies adopted by Riga and Vilnius, it turned out that Minsk could count on strong support from local business groups in both of these countries, as these groups fear impediments in this highly profitable co-operation and also retaliation from the Belarusian government. The existing economic bonds mean that neither Vilnius nor Riga have any other choice but to co-operate with Belarus. They must therefore adopt a carefully balanced policy towards Minsk. At the same time, being EU member states, they do not officially deny that a problem exists with the violation of human rights by Alyaksandr Lukashenka’s regime. It is for this reason that the governments of Latvia and Lithuania will be interested in maintaining the status quo in relations with Minsk. On the other hand, Belarus in a way also has no other choice but to use the ports in Lithuania and Latvia, and this will prevent it from excessively escalating tension in relations with these two countries.

El movimiento estudiantil de la Universidad Nacional de La Plata ante la "Revolución Libertadora" : actores, transformaciones y conflictos entre septiembre de 1955 y mayo de 1956

El presente trabajo se propone abordar los sucesos que marcaron la dinámica institucional y política de la Universidad de La Plata en los meses que van entre septiembre de 1955 y mayo de 1956, con énfasis en un actor en particular: el movimiento estudiantil. Mediante el trabajo con fuentes documentales escritas de diversa índole vamos a reconstruir los primeros meses de la UNLP posperonista, atendiendo a tres aspectos del proceso abierto: en primer lugar, el proceso de reconstrucción y desperonización de las estructuras universitarias y del cuerpo docente y administrativo. Segundo, vamos a preguntarnos cuál fue el rol del movimiento estudiantil: qué acciones llevó a cabo, cuáles eran sus diferencias internas y sus principales debates. Como es conocido, el proceso de normalización universitaria atravesó un momento disruptivo comenzando 1956: la sanción del Decreto-Ley 6.403, y en particular su artículo n°28, va a provocar masivas movilizaciones (tanto a su favor como en contra), numerosas tomas e incluso fuertes incidentes en las calles platenses. Las últimas líneas del trabajo estarán dedicadas a este tercer aspecto del período señalado.