Molecular dynamics simulation of organic-inorganic nanocomposites: Layering behavior and interlayer structure of organoclays

Isothermal-isobaric (NPT) molecular dynamics simulation has been performed to investigate the layering behavior and structure of nanoconfined quaternary alkylammoniums in organoclays. This work is focused on systems consisting of two clay layers and a number of alkylammoniums, and involves the use of modified Dreiding force field. The simulated basal spacings of organoclays agree satisfactorily with the experimental results in the literature. The atomic density profiles in the direction normal to the clay surface indicate that the alkyl chains within the interlayer space of montmorillonite exhibit an obvious layering behavior. The headgroups of long alkyl chains are distributed within two layers close to the clay surface, whereas the distributions of methyl and methylene groups are strongly dependent on the alkyl chain length and clay layer charge. Monolayer, bilayer, and pseudo-trilayer structures are found in organoclays modified with single long alkyl chains, which are identical to the structural models based on the measured basal spacings. A pseudo-quadrilayer structure, for the first time to our knowledge, is also identified in organoclays with double long alkyl chains. In the mixture structure of paraffin-type and multilayer, alkyl chains do not lie flat within a single layer but interlace, and also jump to the next layer in pseudo-trilayer as well as next nearest layer in pseudo-quadrilayer.

Organic–inorganic bismuth (III)-based material: A lead-free, air-stable and solution-processable light-absorber beyond organolead perovskites

Methylammonium bismuth (III) iodide single crystals and films have been developed and investigated. We have further presented the first demonstration of using this organic–inorganic bismuth-based material to replace lead/tin-based perovskite materials in solution-processable solar cells. The organic–inorganic bismuth-based material has advantages of non-toxicity, ambient stability, and low-temperature solution-processability, which provides a promising solution to address the toxicity and stability challenges in organolead- and organotin-based perovskite solar cells. We also demonstrated that trivalent metal cation-based organic–inorganic hybrid materials can exhibit photovoltaic effect, which may inspire more research work on developing and applying organic-inorganic hybrid materials beyond divalent metal cations (Pb (II) and Sn (II)) for solar energy applications.

Melting of an Anchored Bilayer: Molecular Dynamics Simulations of the Structural Transition in (CnH2n+1NH3)(2)PbI4 (n=12, 14, 16, 18)

The thermally driven Structural phase transition in the organic-inorganic hybrid perovskite (CnH2n+1NH3)(2)PbI4 has been investigated using molecular dynamics (MD) simulations. This system consists of positively charged alkyl-amine chains anchored to a rigid negatively charged PbI4 sheet with the chains organized as bilayers with a herringbone arrangement. Atomistic simulations were performed using ail isothermal-isobaric ensemble over a wide temperature range from 65 to 665 K for different alkyl chain lengths, n = 12, 14, 16, and 18. The simulations are able to reproduce the essential Features of the experimental observations of this system, including the existence of a transition, the linear variation of the transition temperature with alkyl chain length, and the expansion of the bilayer thickness at the transition. By use of the distance fluctuation Criteria, it is Shown that the transition is associated With a Melting of the alkyl chains of the anchored bilayer. Ail analysis of the conformation of the alkyl chains shows increased disorder in the form of gauche defects above due melting transition. Simulations also show that the melting transition is characterized by the complete disappearance of all-trans alkyl chains in the anchored bilayer, in agreement with experimental observations. A conformationally disordered chain has a larger effective cross-sectional area, and above due transition a uniformly tilted arrangement of the anchored chains call no longer be Sustained. At the melt the angular distribution of the orientation of the chains are 110 longer uniform; the chains are splayed allowing for increased space for individual chains of the anchored bilayer. This is reflected in a sharp rise in the ratio of the mean head-to-head to tail-to-tail distance of the chains of the bilayer at the transition resulting in in expansion of the bilayer thickness. The present MD simulations provide a simple explanation as to how changes in conformation of individual alkyl-chains gives rise to the observed increase in the interlayer lattice spacing of (CnH2n+1NH3)(2)PbI4 at the melting transition.

Completely random nanoporous Cu4O3-CuO-C composite thin films for potential application as multiple channel photonic band gap based filter in the telecommunication wavelengths

In 2003, Babin et al. theoretically predicted (J. Appl. Phys. 94:4244, 2003) that fabrication of organic-inorganic hybrid materials would probably be required to implement structures with multiple photonic band gaps. In tune with their prediction, we report synthesis of such an inorganic-organic nanocomposite, comprising Cu4O3-CuO-C thin films that experimentally exhibit the highest (of any known material) number (as many as eleven) of photonic band gaps in the near infrared. On contrary to the report by Wang et al. (Appl. Phys. Lett. 84:1629, 2004) that photonic crystals with multiple stop gaps require highly correlated structural arrangement such as multilayers of variable thicknesses, we demonstrate experimental realization of multiple stop gaps in completely randomized structures comprising inorganic oxide nanocrystals (Cu4O3 and CuO) randomly embedded in a randomly porous carbonaceous matrix. We report one step synthesis of such nanostructured films through the metalorganic chemical vapor deposition technique using a single source metalorganic precursor, Cu-4(deaH)(dea)(oAc)(5) a <...aEuro parts per thousand(CH3)(2)CO. The films displaying multiple (4/9/11) photonic band gaps with equal transmission losses in the infrared are promising materials to find applications as multiple channel photonic band gap based filter for WDM technology.

溶胶-凝胶光波导环形谐振腔的挥发性有机化合物传感特性

采用溶胶-凝胶法制作波导环形谐振腔, 讨论了环形谐振腔器件的传输特性。测量了在不同物质、不同体积分数的挥发性有机化合物(VOC)蒸气气氛下器件的传输光谱的敏感性。结果表明, 谐振波长随甲醇、乙醇、丙醇等醇类化合物, 以及丙酮、甲醛等蒸气体积分数的上升而向长波方向移动, 具有高的灵敏度, 且两者基本呈线性关系。其中, 对丙醇最敏感, 灵敏度达到1.403 pm/10-6。对甲烷和二甲苯也有微弱反应, 但是其灵敏度很低。也测量了水蒸气对传输谱特性的影响。观察到传输谱衬比度对不同挥发性有机化合物物质蒸气的不同敏

溶胶-凝胶条波导Sagnac环的乙醇蒸气传感特性

采用有机/无机混合溶胶-凝胶法制作条形光波导,并将条波导接入光纤Sagnac 环中,测量了输出光功率随环境气氛中乙醇蒸气体积分数变化的特性,表明在实验研究的范围内,输出信号与乙醇蒸气体积分数呈正弦变化。根据Sagnac环结构输出特性的基本关系,反映了溶胶-凝胶条波导在乙醇蒸气气氛下产生了双折射效应。观察到双折射相移与乙醇体积分数的亚线性关系。对实验数据拟合,计算了偏振相移的线性项和二次项系数,得到所制备的条波导的双折射对乙醇体积分数的响应为Δn≈4.4×10-2。测量了信号变化的时间演变特性,典型的上升和

Sensitivity to alcohols of a planar waveguide ring resonator fabricated by a sol-gel method

A planar waveguide ring resonator was fabricated by organic-inorganic hybrid sol-gel materials; its sensitivity to ethanol vapor was experimentally investigated. It was found that dips in the transmission spectrum of the device shifted to longer wavelengths with increasing the ethanol concentration, and its sensitivity showed a linear relation with the ethanol concentration, showing a coefficient of 1.13 pm/ppm. In addition, the transmission loss of the ring resonator decreased with increasing the ethanol concentration. The measured characteristics suggest that the device may be considered as one of the candidates of alcohol vapor sensors. (c) 2006 Elsevier B.V. All rights reserved.

Photovoltaic effect of tin disulfide with nanocrystalline/amorphous blended phases

Tin disulfide (SnS2) nanocrystalline/amorphous blended phases were synthesized by mild chemical reaction. Both X-ray diffraction and transmission electron microscopy measurements demonstrate that the as-synthesized particles presented very small size, with a diameter of only a few nanometers. The photoluminescence (PL) spectrum suggests efficient splitting of photo-generated excitons in poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) and SnS2 hybrid films. Organic/inorganic hybrid solar cells comprising MDMO-PPV and SnS2 were prepared, giving photovoltage, photocurrent, fill factor and efficiency values of 0.702 V, 0.549 mA/cm(2), 0.385 and 0.148%, respectively, which suggests that this phase-blended inorganic semiconductor can also serve as a promising solar energy material. (C) 2009 Elsevier Ltd. All rights reserved.

Electropolymerized poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film on ITO glass and its application in photovoltaic device

Poly(3,4-ethylenedioxythiopliene):poly(styrene sulfonate) (PEDOT:PSS) films have been electrochemically polymerized in situ on ITO glass substrate in boron trifluoride diethyl etherate electrolyte (BFEE). Cyclic voltammograms show good redox activity and stability of the PEDOT films. These films had been directly used to fabricate organic-inorganic hybrid solar cells with the structure of ITO/PEDOT/ZnO:MDMC-PPV/Al. The solar cells made of electrochemically polymerized films exhibit higher energy conversion efficiencies compared with that prepared by the spin-coating method, and the highest value is 0.33%. This in-situ electropolymerized method effectively simplifies fabricating procedures and may blaze a facile and economical route for producing high-efficiency solar cells.

稀土(Er, Nd, Yb, Pr, Ho, Sm)有机/无机杂化材料的制备及发光性能研究

目前，国内外对于铕和铽等稀土配合物的可见区发光和应用都有大量研究，但对具有近红外发光（800-1700 nm）性能的稀土配合物的研究还处于起步阶段。由于稀土的近红外发光在光纤通讯、激光系统及诊断学等方面应用具有特殊的优点，越来越引起人们的兴趣和重视。 稀土近红外发光配合物的致命弱点是其光、热和化学稳定性较差，从而限制了其在很多领域的实际应用。而溶胶－凝胶材料和介孔材料具有良好的光、热和化学稳定性，能改善客体分子的结构环境和化学微环境，从而能有效提高客体分子的发光性能。因此，本论文将具有优良近红外发光性能的稀土配合物分别与上述两种基质复合，从实验和理论研究稀土近红外发光杂化材料的性能和应用价值，制备出具有良好稳定性的高效稀土近红外发光杂化材料，以期为光纤通讯、激光等领域提供潜在的候选材料。围绕这一宗旨，开展了如下工作： 通过原位技术分别得到了掺杂和嫁接[Ln(dbm)3phen]化合物（Ln = Er, Nd, Yb）的杂化凝胶材料，Ln-D-P gel和Xerogel-Ln。通过对其近红外发光性能的研究，表明材料中配体能很好的保护稀土离子，并将能量有效的传递给稀土离子。采用Judd-Ofelt理论对所得部分材料进行了光谱分析，基于实验数据和理论分析表明其具有潜在的光放大和激光应用价值。 选择了两种含全氟化烷基链的β-二酮配体Hhfth和Htfnb，通过功能化的phen-Si配体，将三元配合物[Ln(hfth)3phen] (Ln = Er, Nd, Yb, Sm)和[Pr(tfnb)3phen]成功共价嫁接到介孔MCM-41和SBA-15杂化材料中，得到的衍生材料Ln(hfth)3phen–MCM-41、Pr(tfnb)3phen–MCM-41和Ln(hfth)3phen–SBA-15、Pr(tfnb)3phen–SBA-15都保持了高度有序的介孔p6mm结构，并展现出稀土离子特征的近红外发射。所得稀土配合物功能化的材料的发射光谱能完全覆盖对光通讯极具应用价值的1300-1600nm区域。 通过对Er(dbm)3phen–M41(X, Y) (X = 1~14, Y = 3, 6, 12, 18, 24 h)材料系统的比较研究，选择了X = 12, Y = 6作为合成目标材料的优化参数，通过功能化的phen-Si配体将[Ln(dbm)3phen]配合物共价嫁接于有序介孔MCM-41和SBA-15中(Ln = Er, Nd, Yb)，所得两类材料Ln(dbm)3phenM41和Ln(dbm)3phenS15都保持了很好的介孔有序性，并具有良好的近红外发光性能。通过对Ln(dbm)3phenM41和Ln(dbm)3phenS15两类材料发光行为的比较，以及两类材料中稀土离子的含量及孔结构的分析，推出以SBA-15为载体得到的材料在相对发光强度和荧光寿命上，均比以MCM-41为载体的材料有所提高。 通过对8－羟基喹啉配体进行改性，合成了具有双功能的配体Q-Si，继而合成了共价嫁接8－羟基喹啉衍生物的介孔杂化材料Q–SBA-15，其形貌均一，并具有高度有序的介孔p6mm结构。通过配体交换反应，得到了嫁接稀土喹啉配合物的具有近红外发光性能的介孔杂化材料LnQ3–SBA-15 (Ln = Er, Nd, Yb)，其仍然保持高度有序的介孔结构，且外形呈现与母体材料Q–SBA-15相似的弯曲圆柱状。激发配体的吸收，LnQ3–SBA-15材料都分别展现出相应稀土离子特征的近红外发射，并详细分析和讨论了所得介孔杂化材料的近红外发光性能。

稀土配合物有机／无机杂化薄膜的制备与光电性质研究

有机／无机杂化功能超薄膜是二十一世纪分子科学的重要发展前沿之一，设计具有功能性的有机／无机杂化薄膜已成为这一领域的挑战性课题。本论文分别采用Lallgmuir-B1odgett（LB）膜技术及溶胶一凝胶薄膜组装技术，将稀土无机配合物和稀土有机配合物分别与有机大分子化合物进行薄膜分子组装，对稀土配合物有机／无机杂化薄膜的光、电性质进行了研究。采用LB技术，将K11Ce（PWllO39）2·22H2O，K11Eu（PW11O39）2·25H2O，K11Gd（PW11O39）2·24H2O，K11Sm（PMo11O39）2·19H2O，K11Ce（PMo11O39）2·23H2O，K11Eu（PMo11O39）2·22H2O，K11Gd（PMo11O39）2·2OH2O，K11La（PMo11O39）2·18H2O八种稀土杂多化合物分别掺杂到聚喳琳中，得到十八胺（十八酸）／聚喳琳／稀土杂多化合物导电杂化LB膜。杂化LB膜表面的稀土杂多化合物颗粒大小在30-80nm之间。电性质研究表明，稀土杂多化合物的掺杂可使聚喳琳的导电性显著提高，且钥系稀土杂多化合物掺杂使聚哇琳的导电性增加更为显著。采用溶胶一凝胶薄膜组装技术，将K13（EuSiW11O39）2·28H2O，K13（EuGewl 1039）2·25H2O，K巧（EuBWllO39）2·22H2O，N钩SmWlo036·18H20，Na9DyS10O36·22H2O五种稀土杂多化合物分别与聚醋进行薄膜组装，得到聚醋／稀土杂多化合物溶胶一凝胶膜。荧光光谱研究表明，稀土离子在溶胶一凝胶膜中格位对称性降低，红橙比和黄蓝比发生了改变。1:11型稀土杂多化合物固体与聚酷／稀土杂多化合物溶胶一凝胶膜有不同的能量转移过程，在溶胶一凝胶膜中，配体能将能量传递给稀土离子。采用原位法将对十六烷氧基苯甲酸试及邻十七酞基苯甲酸试有机配合物分别进行了溶胶一凝胶薄膜组装，对其荧光性质进行了研究。结果表明，芳香梭酸配体与稀土诫离子有较好的能级匹配，能够有效地将吸收的能量传递给Tb3+离子，薄膜具有良好的发绿光性能。

[PMMA-b-PAN］-Fe络合物制备有机一无机杂化薄膜

本论文通过聚甲基丙烯酸甲酯-b-聚丙烯睛嵌段共聚物同铁（III）离子络合物（［PMMA-b-PAN］-Fe）制备有机一无机杂化薄膜，并利用妨M对薄膜的表面形态进行了表征。结果表明，通过控制［PMMA-b-PAN］-Fe络合物溶液热处理时间（T=120℃）及络合物溶液中精基同铁＜III）离子的摩尔比率，可以得到不同表面形态的有机一无机杂化薄膜。并借助抑S对［PMMA-b-PAN〕-Fe络合物配位作用进行了研究，发现铁（III）离子与PMMA-b-PAN嵌段共聚物中的睛基配位。此外，对掺杂有FeSO4·7H2O 的均聚甲基丙烯酸甲酷（PMMA）溶液、均聚丙烯睛(PAN)溶液和FeSO4·7H2O（溶解在DMF中）溶液经不同时间热处理（T=120℃）后的薄膜表面形态进行了研究，结果发现，掺杂有FeSO4·7H2O 的PMMA 溶液经20in热处理后，薄膜的表面形态与FeS04·7H2O。溶液经20in热处理后薄膜的表面形态基本相同，而掺杂有FesO4·7H2O的PAN溶液经不同时间热处理后，薄膜的表面形态没有明显的变化。与此同时，对匡[PMMA-b-PAN]-Fe络合物高温热解制备碳材料进行了初步的研究，研究结果表明，利用PMMA-b-PAN］-e杂化薄膜炭化制备具有纳米尺寸孔洞的碳薄膜是可能的，但控制好热解条件至关重要。

Europium complexes immobilization on titania via chemical modification of titanium alkoxide

We report a facile strategy to tether lanthanide complexes to organic-inorganic hybrid titania materials via sol-gel processing by employing chemically modified titanium alkoxide as the precursor where the organic ligand sensitizing the luminescence of lanthanide ions is bonded to titanium.