Impacts of fishing gears, fishing methods and fishing effort in the fisheries of Lake Victoria and proposals for management

The initial subsistence fisheries of Lake Victoria were dominated by two indigenous tilapiines, Oreochromis esculentus (Graham 1929) and Oreochromis variabilis Boulenger 1906, exploited with simple fishing crafts and gears that had little impact on the fish stocks (Jackson 1971). Commercial fisheries, targeting the tilapia fishery, started at the beginning of the 20th Centurywhen cotton flax gillnets were first introduced in 1905 into the Nyanza Gulf in Kenya. Gillnets were quickly adopted around the whole lake and consequently, the native methods of fishing soon died out (Jackson 1971). Following the introduction of gillnets, fishing boats and their propulsion methods were also improved. These improvements in fishing capacity coincided with development of urban centres and increasing human population around the lake, which increased the demand for fishery products. To satisfy the increasing demand, fishing effort increased greatly during the 20th century, despite the decline of catch per unit of effort (CPUE) (Jackson 1971; Ogutu-Ohwayo 1990). The initial catch rates of 127mm (5 inch) mesh size gill nets in the tilapia-based fishery, in 1905, was in the range of 50 to 100 fish per gillnet of approximately 50 m in length. However, twenty years later, the catch rates of gillnets of the same mesh size had declined to about six fish per net and gillnets of smaller mesh sizes, which had better catch rates, had been introduced suggesting overfishing (Worthington and Worthington, 1933).

Fishery methods and fish diversity in the Kilombero River in south-eastern Tanzania

Assessment of common fishery methods and of fish diversity was undertaken in two fishing camps on the Kilombero River in south-eastern Tanzania in surveys towards the end of the dry season, 1994. Fishermen identified 23 different types of fish that they caught on a regular basis. Only 19 species of fish, belonging to 17 genera and 11 families were, however, identified according to Linnean taxonomy. Hooks, nets, traps and spears were used to catch fish. Fish were either sold fresh. or preserved for storage and long-distance tranport by smoking or frying. based un frequency distributions of the numbers of fish landed over a 4 day period at one of the camps, a Shannon-diversity index of 1.95 was calculted. The fork (or total) length of 480 fish and the weight of 413 fish were measured and length frequency distributions as well as length-weight relationships determined for the six most common species. It is concluded that local fishing methods applied in the Kilombero River allow for sustainable fish production.

Calculation and measurement of the magnetostriction of multilayered composites

A new theoretical model that predicts the magnetostriction of multilayered composites has been developed. The model takes into account the shear stress between the composite layers and consequently predicts a non-uniform strain along their thickness. The model has been experimentally validated by producing composites formed from three materials with different magnetostrains and mechanical properties, and controlled layer thicknesses in the order of micrometers. Deformations of several ppm, up to 7.5% of the saturation magnetostrain were measured between the edge and the centre of such composites. © 2006 Elsevier B.V. All rights reserved.

Comprehensive Property Retrieval and Measurement of Concrete Spalling Using Machine Vision for Post-Earthquake Safety Assessments

Active vibration control (AVC) is a relatively new technology for the mitigation of annoying human-induced vibrations in floors. However, recent technological developments have demonstrated its great potential application in this field. Despite this, when a floor is found to have problematic floor vibrations after construction the unfamiliar technology of AVC is usually avoided in favour of more common techniques, such as Tuned Mass Dampers (TMDs) which have a proven track record of successful application, particularly for footbridges and staircases. This study aims to investigate the advantages and disadvantages that AVC has, when compared with TMDs, for the application of mitigation of pedestrian-induced floor vibrations in offices. Simulations are performed using the results from a finite element model of a typical office layout that has a high vibration response level. The vibration problems on this floor are then alleviated through the use of both AVC and TMDs and the results of each mitigation configuration compared. The results of this study will enable a more informed decision to be made by building owners and structural engineers regarding suitable technologies for reducing floor vibrations.

Optimization on manifolds: Methods and applications

This paper provides an introduction to the topic of optimization on manifolds. The approach taken uses the language of differential geometry, however,we choose to emphasise the intuition of the concepts and the structures that are important in generating practical numerical algorithms rather than the technical details of the formulation. There are a number of algorithms that can be applied to solve such problems and we discuss the steepest descent and Newton's method in some detail as well as referencing the more important of the other approaches.There are a wide range of potential applications that we are aware of, and we briefly discuss these applications, as well as explaining one or two in more detail. © 2010 Springer -Verlag Berlin Heidelberg.

Atom probe tomography of SRAM transistors: Specimen preparation methods and analysis

Different FIB-based sample preparation methods for atom probe analysis of transistors have been proposed and discussed. A special procedure, involving device deprocessing, has been used to analyze by APT a sub-30 nm transistor extracted from a SRAM device. The analysis provides three dimensional compositions of Ni-silicide contact, metal gate and high-k oxide of the transistor gate. © 2013 Elsevier B.V. All rights reserved.

Multiplicity factor and diffraction geometry factor for single crystal X-ray diffraction analysis and measurement of phase content in cubic GaN/GaAs(001) epilayers

On the basis of integrated intensity of rocking curves, the multiplicity factor and the diffraction geometry factor for single crystal X-ray diffraction (XRD) analysis were proposed and a general formula for calculating the content of mixed phases was obtained. With a multifunction four-circle X-ray double-crystal diffractometer, pole figures of cubic (002), {111} and hexagonal {1010} and reciprocal space mapping were measured to investigate the distributive character of mixed phases and to obtain their multiplicity factors and diffraction geometry factors. The contents of cubic twins and hexagonal inclusions were calculated by the integrated intensities of rocking curves of cubic (002), cubic twin {111}, hexagonal {1010} and {1011}.

RF system design and measurement of HIRFL-CSRe

An RF system for the CSRe (cooling storage experimental ring) is designed and manufactured domestically. The present paper mainly describes the RF system design in five main sections: ferrite ring, RF cavity, RF generator, low level system and cavity cooling. The cavity is based on a type of coaxial resonator which is shorted at the end with one gap and loaded with domestic ferrite rings. The RF generator is designed in the push-pull mode and the low level control system is based on a DSP+FGPA+DDS+USB inter...

The regional types of China's floating population: Identification methods and spatial patterns

With the rapid increase of the number and influence of floating population in China, it is urgently needed to understand the regional types of China's floating population and their spatial characteristics. After reviewing the current methods for identifying regional types of floating population, this paper puts forward a new composite-index identification method and its modification version which is consisted of two indexes of the net migration rate and gross migration rate. Then, the traditional single-index and the new composite-index identification methods are empirically tested to explore their spatial patterns and characteristics by using China's 2000 census data at county level. The results show: (1) The composite-index identification method is much better than traditional single-index method because it can measure the migration direction and scale of floating simultaneously, and in particular it can identify the unique regional types of floating population with large scale of immigration and emigration. (2) The modified composite-index identification method, by using the share of a region's certain type of floating population to the total in China as weights, can effectively correct the over- or under-estimated errors due to the rather large or small total population of a region. (3) The spatial patterns of different regional types of China's floating population are closely related to the regional differentiation of their natural environment, population density and socio-economic development level. The three active regional types of floating population are mainly located in the eastern part of China with lower elevation, more than 800 mm precipitation, rather higher population densities and economic development levels.