Experimentação e educação ambiental: contribuições metodológicas

During the last centuries, the human being have been considered the center of the universe. The man believed that nature was at his disposal. Appropriated their processes, their cycles changed, redefined their spaces. Today, when faced with an environmental crisis which threatens the planet life, including the human life, the Science Education can contribute to a reconstruction of man-nature relationship in other terms. The transformation of teaching practices in the school environment, to be reflective, it is still a process that challenges the vast majority of teachers. As has been indicated by Guerra (2004), among others, the traditional teaching of content delivery is still very strong and certainly more deeply embedded in ideas and activities of the teachers who focus on environmental education. With it, a theory and pedagogical discourses in critical-reflexive actions is still a major obstacle. Therefore, new proposals for education and continuing education activities need to be formulated and presented based on the characteristics and needs breathing. Therefore propose changes in the way of teaching, where there is more room for a theory and praxis alone or with a only scientific truth. The scenery of society requires that knowledge is constructed to interconnect all disciplines, joining theory and practice so we can understand the whole and their relations in an integrated manner. It was proposed here a way to build a school and applying theoretical and practical activities involving experimental and seeking to meet the principles of Environmental Education for the training of citizens aware and critical. At the same time cares to use textbooks very rich in its pedagogical character that are present in schools and often are, forgotten and unused by teachers. From this way, I chose to Experimentoteca, ...(Complete abstract click electronic access below)

O papel das redes de transformação no processo de inovação: estudos de caso sobre a descoberta e a comercialização da inovação

Innovation is widely recognized as important. In addition, in this context, innovation networks have gained importance in academic studies, since an organization alone, does not always have access to all necessary resources. Gobbo Junior and Olsson (2010) proposed a model of network innovation whereby the transformation networks would be the linking structures between exploration and exploitation networks. In this context, this paper presents two case studies of innovation networks, aiming to increase the understanding on transformation networks. The objective was to understand how they interconnect exploration and exploitation networks; the main actors present in this interface; and to evaluate whether these actors can act as agents, to accelerate the innovation process. It was possible to verify how the transformation networks interconnect exploration and exploitation, and identify the practices and their main actors.

Joint Computing and Network Resource Scheduling in a Lambda Grid Network

Data-intensive Grid applications require huge data transfers between grid computing nodes. These computing nodes, where computing jobs are executed, are usually geographically separated. A grid network that employs optical wavelength division multiplexing (WDM) technology and optical switches to interconnect computing resources with dynamically provisioned multi-gigabit rate bandwidth lightpath is called a Lambda Grid network. A computing task may be executed on any one of several computing nodes which possesses the necessary resources. In order to reflect the reality in job scheduling, allocation of network resources for data transfer should be taken into consideration. However, few scheduling methods consider the communication contention on Lambda Grids. In this paper, we investigate the joint scheduling problem while considering both optical network and computing resources in a Lambda Grid network. The objective of our work is to maximize the total number of jobs that can be scheduled in a Lambda Grid network. An adaptive routing algorithm is proposed and implemented for accomplishing the communication tasks for every job submitted in the network. Four heuristics (FIFO, ESTF, LJF, RS) are implemented for job scheduling of the computational tasks. Simulation results prove the feasibility and efficiency of the proposed solution.

Joint Computing and Network Resource Scheduling in a Lambda Grid Network

Data-intensive Grid applications require huge data transfers between grid computing nodes. These computing nodes, where computing jobs are executed, are usually geographically separated. A grid network that employs optical wavelength division multiplexing (WDM) technology and optical switches to interconnect computing resources with dynamically provisioned multi-gigabit rate bandwidth lightpath is called a Lambda Grid network. A computing task may be executed on any one of several computing nodes which possesses the necessary resources. In order to reflect the reality in job scheduling, allocation of network resources for data transfer should be taken into consideration. However, few scheduling methods consider the communication contention on Lambda Grids. In this paper, we investigate the joint scheduling problem while considering both optical network and computing resources in a Lambda Grid network. The objective of our work is to maximize the total number of jobs that can be scheduled in a Lambda Grid network. An adaptive routing algorithm is proposed and implemented for accomplishing the communication tasks for every job submitted in the network. Four heuristics (FIFO, ESTF, LJF, RS) are implemented for job scheduling of the computational tasks. Simulation results prove the feasibility and efficiency of the proposed solution.

Come tradurre il metadiscorso letterario. Esempi di scrittura femminile nell'Ottocento austriaco

L’argomento affrontato nel presente lavoro di tesi dal titolo “Come tradurre il metadiscorso letterario. Esempi di scrittura femminile nell’Ottocento austriaco” è la versione interlinguistica di testi saggistici afferenti all’ambito del metadiscorso letterario. Nello specifico, non vengono analizzati testi di critica e/o metodologia ma scritti funzionali, di forte carattere pragmatico, che pur tuttavia rientrano tra le testimonianze di alta caratura letteraria, perché dovuti ad autrici che hanno fatto dell’espressione estetica la propria finalità primaria. I materiali scelti per l’analisi linguistico-testuale, compresi in un arco temporale tra la fine del Settecento e la metà dell’Ottocento, sono realizzati da donne che hanno operato in ambito teatrale facendo dell’attività di scrittura lo strumento della propria emancipazione intellettuale ed economica. La necessità di trovare una via alla pubblicazione le ha indotte a strategie di scrittura connotate da particolari stilemi e artifici retorici atti a favorire l’accettazione e la diffusione delle proposte editoriali di cui questi “paratesti” costituivano il momento giustificante. Il “lavoro di penna” è un’esperienza che viene ad assumere molteplici contorni, non privi di ricadute al momento della scelta delle strategie traduttive. Dal punto di vista formale, le testimonianze si collocano in una zona di modalità espressiva contigua alla testimonianza autobiografica. Il periodo storico e l’area di provenienza delle autrici hanno reso necessario un approccio capace di incrociare il piano diacronico con la dimensione diatopica, rendendo conto delle componenti diamesiche di una scrittura che nasce dal teatro per il teatro e ad esso e ai suoi frequentatori deve rapportarsi. Il modello traduttologico applicato ricava le sue linee fondamentali dalle riflessioni della linguistica testuale e dall’approccio integrato/multidisciplinare della “prototipologia dinamica”.

Reliable and Variation-Tolerant Interconnection Network for Low Power MPSOCS

Multi-Processor SoC (MPSOC) design brings to the foreground a large number of challenges, one of the most prominent of which is the design of the chip interconnection. With a number of on-chip blocks presently ranging in the tens, and quickly approaching the hundreds, the novel issue of how to best provide on-chip communication resources is clearly felt. Scaling down of process technologies has increased process and dynamic variations as well as transistor wearout. Because of this, delay variations increase and impact the performance of the MPSoCs. The interconnect architecture inMPSoCs becomes a single point of failure as it connects all other components of the system together. A faulty processing element may be shut down entirely, but the interconnect architecture must be able to tolerate partial failure and variations and operate with performance, power or latency overhead. This dissertation focuses on techniques at different levels of abstraction to face with the reliability and variability issues in on-chip interconnection networks. By showing the test results of a GALS NoC testchip this dissertation motivates the need for techniques to detect and work around manufacturing faults and process variations in MPSoCs’ interconnection infrastructure. As a physical design technique, we propose the bundle routing framework as an effective way to route the Network on Chips’ global links. For architecture-level design, two cases are addressed: (I) Intra-cluster communication where we propose a low-latency interconnect with variability robustness (ii) Inter-cluster communication where an online functional testing with a reliable NoC configuration are proposed. We also propose dualVdd as an orthogonal way of compensating variability at the post-fabrication stage. This is an alternative strategy with respect to the design techniques, since it enforces the compensation at post silicon stage.

UAVNet: A Mobile Wireless Mesh Network Using Unmanned Aerial Vehicles

We developed UAVNet, a framework for the autonomous deployment of a flying Wireless Mesh Network using small quadrocopter-based Unmanned Aerial Vehicles (UAVs). The flying wireless mesh nodes are automatically interconnected to each other and building an IEEE 802.11s wireless mesh network. The implemented UAVNet prototype is able to autonomously interconnect two end systems by setting up an airborne relay, consisting of one or several flying wireless mesh nodes. The developed software includes basic functionality to control the UAVs and to setup, deploy, manage, and monitor a wireless mesh network. Our evaluations have shown that UAVNet can significantly improve network performance.

Hop-to-Hop Reliability in IP-Based Wireless Sensor Networks - A Cross-Layer Approach

To interconnect a wireless sensor network (WSN) to the Internet, we propose to use TCP/IP as the standard protocol for all network entities. We present a cross layer designed communication architecture, which contains a MAC protocol, IP, a new protocol called Hop-to-Hop Reliability (H2HR) protocol, and the TCP Support for Sensor Nodes (TSS) protocol. The MAC protocol implements the MAC layer of beacon-less personal area networks (PANs) as defined in IEEE 802.15.4. H2HR implements hop-to-hop reliability mechanisms. Two acknowledgment mechanisms, explicit and implicit ACK are supported. TSS optimizes using TCP in WSNs by implementing local retransmission of TCP data packets, local TCP ACK regeneration, aggressive TCP ACK recovery, congestion and flow control algorithms. We show that H2HR increases the performance of UDP, TCP, and RMST in WSNs significantly. The throughput is increased and the packet loss ratio is decreased. As a result, WSNs can be operated and managed using TCP/IP.

Gravity-based Local Clock Synchronization in Wireless Sensor Networks

Contention-based MAC protocols follow periodic listen/sleep cycles. These protocols face the problem of virtual clustering if different unsynchronized listen/sleep schedules occur in the network, which has been shown to happen in wireless sensor networks. To interconnect these virtual clusters, border nodes maintaining all respective listen/sleep schedules are required. However, this is a waste of energy, if locally a common schedule can be determined. We propose to achieve local synchronization with a mechanism that is similar to gravitation. Clusters represent the mass, whereas synchronization messages sent by each cluster represent the gravitation force of the according cluster. Due to the mutual attraction caused by the clusters, all clusters merge finally. The exchange of synchronization messages itself is not altered by LACAS. Accordingly, LACAS introduces no overhead. Only a not yet used property of synchronization mechanisms is exploited.

Management Research on Reciprocity: A Review of the Literature

Although reciprocity is fundamental to all social orders, management research offers few reviews of the concept’s theoretical origins and current applications. To help bridge this gap, we elucidate the dominant understandings of reciprocity, ask which areas of research emerge from them, and explore how they interconnect. Our bibliometric methodology detects four clusters of management research on reciprocity. Across these clusters, authors subscribe mainly to substantialist ontology, marginalize morally oriented motives consistent with relational ontology, and largely assume that benefit-oriented motives underlie reciprocity. We outline the advantages of a moral-oriented relationalist concept of reciprocity and discuss potential areas for its development in management research.

Power Measurement Methodology for FPGA Devices

The efficiency of power optimization tools depends on information on design power provided by the power estimation models. Power models targeting different power groups can enable fast identification of the most power consuming parts of design and their properties. The accuracy of these estimation models is highly dependent on the accuracy of the method used for their characterization. The highest precision is achieved by using physical onboard measurements. In this paper, we present a measurement methodology that is primarily aimed at calibrating and validating high-level dynamic power estimation models. The measurements have been carefully designed to enable the separation of the interconnect power from the logic power and the power of the clock circuitry, so that each of these power groups can be used for the corresponding model validation. The standard measurement uncertainty is lower than 2% of the measured value even with a very small number of repeated measurements. Additionally, the accuracy of a commercial low-level power estimation tool has been also assessed for comparison purposes. The results indicate that the tool is not suitable for power estimation of data path-oriented designs.

El núcleo de red en redes de nueva generación

El presente proyecto fin de carrera tiene como objetivo realizar un estudio del núcleo de red en las de redes de nueva generación (NGN) y de cómo la evolución de las redes actuales hacia estos conceptos producirá un cambio en la forma de pensar y desarrollar las redes de comunicaciones del futuro. El estudio esta desglosado en tres grandes partes y se inicia con el análisis de la evolución que ha sufrido el núcleo de red en las redes de comunicaciones móviles digitales desde la implantación de las primeras redes digitales hasta la actualidad abarcando tanto la evolución de las redes troncales como de las redes de acceso así como los cambios que han tenido lugar tanto dentro de las propias estructuras de red de los operadores como la forma de interconectarse entre sus redes. Una segunda parte que constituye el cuerpo teórico del trabajo donde se estudia a nivel funcional y de arquitectura de red el desarrollo de los nuevos modelos de red proporcionados por los organismos de estandarización que dan lugar a la aparición de las redes de nueva generación (NGN) y que constituirán el siguiente paso en la evolución de las redes de comunicaciones hacia una infraestructura de red común para todas las redes de acceso actuales. Y una tercera parte que tiene como objetivo el estudio del grado de transformación que tienen que sufrir el núcleo de red en actuales redes troncales de comunicaciones móviles y terrestres, así como una valoración del estado actual de dicha integración, de las dificultades que están encontrando fabricantes y proveedores de servicio para la implementación de dichas redes en el contexto tecnológico y económico actual y su respectivo análisis de como afectará este cambio a los modelos de negocio de los proveedores de servicios de telecomunicaciones. Finalmente se estudia como se esta llevando a cabo este proceso por medio de un caso práctico de implantación e interconexión de la solución propuesta por un fabricante de equipamiento basándose en los modelos anteriormente expuestos en una red comercial de un operador en España y todas las implicaciones asociadas a esta caso concreto. The object of this work is to provide a deep view about the core network inside next generation network (NGN) and how the evolution of the current comunications networks towards the concepts introduced by these new networks brings a change in the way of think and develop communications networks of the future. This work is composed of three blocks and one real case and it starts with the analysis of the evolution of the core network in digital mobile comunications networks since the beginning of the digital mobile comunications networks deployments until nowadays both in core network side and access network side and how the providers have made changes inside their comunications infrastructure and how they interconnect them with other networks. A second part which is the central theoretical part of this work where it is studied the next generation network models stablished by telecomunications associations and how they will be the next step in the evolution of comunications networks towards a common network infrastructure for all existing access networks. A third part where it is studied the level of transformation that core network in mobile and terrestrial comunications networks have to experienced since current situation up to next generation scenarios and what it is the impact of these changes, the issues that are arising for developers, manufactures and service providers in this process, the way that these changes will improve and shift telecomunications business models and how the current economic and technological context is influencing in the whole process. Finally it is studied a actual case about a proposed solution by a manufacturer that based on the models exposed in second part take place a integration and interconection process in a the comercial network of one telecomunication service providers in Spain. This final part regards to all implications associated with this specific case.

Physics and Mathematics in the Engineering Curriculum: Correlation with Applied Subjects

This paper presents a study in which the relationship between basic subjects (Mathematics and Physics) and applied engineering subjects (related to Machinery, Electrical Engineering, Topography and Buildings) in higher engineering education curricula is evaluated. The analysis has been conducted using the academic records of 206 students for five years. Furthermore, 34 surveys and personal interviews were conducted to analyze the connections between the contents taught in each subject and to identify student perceptions of the correlation with other subjects or disciplines. At the same time, the content of the different subjects have been analyzed to verify the relationship among the disciplines.Aproper coordination among subjects will allow students to relate and interconnect topics of different subjects, even with the ones learnt in previous courses, while also helping to reduce dropout rates and student failures in successfully accomplishing the different courses.

Algunas aportaciones sobre la enseñanza y divulgación de la ciencia

Se aportan una serie de ideas y consideraciones sobre temas variados relacionados tanto con el ámbito de la enseñanza como con el de la divulgación de las ciencias experimentales y, de forma específica, la química y la física. Las ideas expuestas en este artículo son, en buena medida, fruto del trabajo asociado a la preparación y celebración de una Jornada en Madrid, en 2012, sobre "Enseñanza y divulgación de la química y la física". Los trabajos presentados en dicho evento se recopilaron en un libro (escrito por 132 autores de distintos niveles educativos y países), con el mismo título y de libre acceso en Internet. Se aboga por favorecer: (i) una divulgación científica rigurosa, con objetivos claros y acordes al público al que va destinada, (ii) una enseñanza con metodologías variadas, e (iii) la imbricación de actividades divulgativas (museos, certámenes, páginas web...) y educativas. We discuss different topics related to science teaching and science outreach, focused especially on chemistry and physics. These ideas were most ly obtained from a 2012 symposium in Madrid about “Teaching and Outreach of Chemistry and Physics.” The papers presented in this symposium, written by 132 authors from different countries and working at di fferent educational levels, were published in a book with the same symposium title and with free access by internet. We emphasize: (i) rigorous science outreach with clear objectives that are well-focuse d on the intended audience; (ii) teaching based on a variety of methodologies, and; (iii) the interconnect ion of several outreach and educational activities (museums, contests, web pages).

A proposal for an Internet of Things-based monitoring system composed by low capability, open source and open hardware devices

The Internet of Things makes use of a huge disparity of technologies at very different levels that help one to the other to accomplish goals that were previously regarded as unthinkable in terms of ubiquity or scalability. If the Internet of Things is expected to interconnect every day devices or appliances and enable communications between them, a broad range of new services, applications and products can be foreseen. For example, monitoring is a process where sensors have widespread use for measuring environmental parameters (temperature, light, chemical agents, etc.) but obtaining readings at the exact physical point they want to be obtained from, or about the exact wanted parameter can be a clumsy, time-consuming task that is not easily adaptable to new requirements. In order to tackle this challenge, a proposal on a system used to monitor any conceivable environment, which additionally is able to monitor the status of its own components and heal some of the most usual issues of a Wireless Sensor Network, is presented here in detail, covering all the layers that give it shape in terms of devices, communications or services.