Improvement of the indirect hemagglutination test for the detection of antibodies to Streptococcus pyogenes

An indirect hemagglutination test for a seroepidemiological survey of Streptococcus pyogenes infection was standardized. This is an improved modification of the indirect hemagglutination test which utilizes an unstable reagent prepared with fresh blood cells. Two types of bacterial antigens represented by extracellular products and purified streptolysin O were assayed, but only the former antigen gave good results. Pretreatment of the bacterial antigen with 0.15 M NaOH and neutralization to pH 5.5, as well as postfixation of sensitized red cells with 0.1% glutaraldehyde at 56oC for 30 min were found to be essential to give long stability to the reagent in liquid suspension, at least 9 months at 4oC. A total of 564 serum samples with high, moderate and low anti-streptolysin O antibodies as determined by the neutralization assay were studied by the indirect hemagglutination test using the new reagent. The sensitivity, specificity, efficiency, positive predictive value and negative predictive value of the test in relation to the neutralization assay were 0.950, 0.975, 0.963, 0.973, and 0.955, respectively. The kappa agreement index between the two techniques was high (0.926) and ranked as "almost perfect". Antibody levels detected by both techniques also presented a high positive correlation (rs = 0.726). Five reagent batches successively produced proved to be reproducible. Thus, the improved indirect hemagglutination test seems to be useful for public health laboratories.

Indirect effects of oral tolerance to ovalbumin interfere with the immune responses triggered by Schistosoma mansoni eggs

The objective of the present study was to investigate whether the injection of a tolerated protein (indirect effects) affects the formation of granulomas around Schistosoma mansoni eggs trapped in the lungs after intravenous (iv) injection into normal (noninfected) C57BL/6 mice (6 animals per group). To induce oral tolerance to chicken egg ovalbumin a 1/5 dilution of egg white in water was offered ad libitum in a drinking bottle for 3 days. Control mice received water. After 7 days, control and experimental animals were injected iv with 2,000 S. mansoni eggs through a tail vein. In some mice of both groups the iv injection of eggs was immediately followed by intraperitoneal (ip) immunization with 10 µg of dinitrophenylated conjugates of ovalbumin (DNP-Ova) emulsified in complete Freund's adjuvant (CFA) or only CFA; 18 days later, mice were bled and killed by ether inhalation. The lungs were fixed in formalin and embedded in paraffin. Serial sections of 5 µm were stained with Giemsa, Gomori's silver reticulin and Sirius red (pH 10.2). Granuloma diameters were measured in histological sections previously stained with Gomori's reticulin. Anti-DNP and anti-soluble egg antigen (SEA) antibodies were analyzed by ELISA. In mice orally tolerant to ovalbumin the concomitant ip injection of DNP-Ova resulted in significantly lower anti-SEA antibodies (ELISA*: 1395 ± 352 in non-tolerant and 462 ± 146 in tolerant mice) and affected granuloma formation around eggs, significantly decreasing granuloma size (area: 22,260 ± 2478 to 12,993 ± 3242 µm²). Active mechanisms triggered by injection of tolerated antigen (ovalbumin) reduce granuloma formation.

Tactical sourcing, fast lane for medium value purchases

Medium value purchases make up a vast portion of organisations’ purchases. Medium value purchases differ from large purchases that the purchases value is smaller and quantity higher. They are not managed efficiently if they are managed as large purchases. However, they should not be managed as small purchases as they have savings possibilities that are not obtained with a process that is designed for small purchases. This study offers a solution for medium value spend management. The solution is tactical sourcing. The tactical sourcing is designed for Tieto Corporation’s need and it was influenced by Six Sigma methods and tools.

Sustainable sourcing in global supply network: assessment of geographic challenges and management methods Case: Stora Enso

The purpose of this work was to describe and compare sourcing practices and challenges in different geographies, to discuss possible options to advance sustainability of global sourcing, and to provide examples to answer why sourcing driven by sustainability principles is so challenging to implement. The focus was on comparison between Europe & Asia & South-America from the perspective of sustainability adoption. By analyzing sourcing practices of the case company it was possible to describe main differences and challenges of each continent, available sourcing options, supplier relationships and ways to foster positive chance. In this qualitative case study gathered theoretical material was compared to extensive sourcing practices of case company in a vast supplier network. Sourcing specialist were interviewed and information provided by them analyzed in order to see how different research results and theories are reflecting reality and to find answers to proposed research questions.

Developing Global Sourcing

Global Sourcing has gained popularity among Multinational Corporations as a method to achieve competitive advantage in increasingly competitive international environment. However, the companies pursuing coordinated global sourcing strategies in many cases tend to overlook many potential synergies from global sourcing. The objective of this research is to identify development areas in which the case company can further improve its conduct regarding global sourcing. This thesis was done as a case study for a MNC with business units across the world. The data used to analyse the case company is based on personal observations of the researcher, company’s material regarding its global sourcing, and on themed interviews and discussions with the company’s purchasing personnel. The analyses of this research are qualitative in nature, relying on subjective observations of the researcher. The research revealed that the case company has room for improvement in many of the identified success factors of global sourcing. One main recommendation of the thesis is to introduce portfolio-tool to identify synergy areas from global sourcing in a more systematic manner. In addition, the thesis proposes that information-processing framework can help the case company design more effective integration mechanisms that are required to process complex information emerging when sourcing globally.

Incorporating Sustainability in Global Sourcing Process, Industry Focus- Apparel / Textile

This is a Master’s thesis research, which mainly aims at identifying the sustainability issues in sourcing process and to identify the core competencies in sourcing process through triple bottom line adaptation. The focus of this thesis is on apparel industry’s sourcing process. The purpose of this thesis is to examine global apparel industry’s reality in their sourcing process and how buyers-suppliers are cooperating with their sourcing process to incorporate sustainability. Other goal of this research paper is to provide recommendation for sustainable sourcing process for companies and how the stakeholders can be benefitted by sustainable sourcing. The literature review part of this paper has presented the research gaps from the earlier researches along with the key concepts, academic purposes and key definitions. Theoretical framework chapter has focused on global sourcing strategies and firm’s competencies and sustainable strategies. From the theoretical framework, author has presented essential theory which establishes the link between research questions and proposed hypotheses. Main results and findings have been presented in empirical findings and in data analysis chapter. This study is an exploratory research followed by deductive method and primary data has been used to evaluate the current situation of apparel industry; which will assist to build the recommendation model. Primary data has been collected through online questionnaires and secondary data has used to cover the literature and theoretical parts. Therefore, the potential outcome of this paper will display the importance of sustainable sourcing from academic point of view and also from the business perspective. As a final point, this paper has followed the research objectives and has generated some new directions for further studies.

Deviations of Governance In IT Multi-Sourcing: A Case Study

IT outsourcing (ITO) refers to the shift of IT/IS activities from internal to external of an organization. In prior research, the governance of ITO is recognized with persistent strategic importance for practice, because it is tightly related to ITO success. Under the rapid transformation of global market, the evolving practice of ITO requires updated knowledge on effective governance. However, research on ITO governance is still under developed due to the lack of integrated theoretical frameworks and the variety of empirical settings besides dyadic client-vendor relationships. Especially, as multi-sourcing has become an increasingly common practice in ITO, its new governance challenges must be attended by both ITO researchers and practitioners. To address this research gap, this study aims to understand multi-sourcing governance with an integrated theoretical framework incorporating both governance structure and governance mechanisms. The focus is on the emerging deviations among formal, perceived and practiced governance. With an interpretive perspective, a single case study is conducted with mixed methods of Social Network Analysis (SNA) and qualitative inquiries. The empirical setting embraces one client firm and its two IT suppliers for IT infrastructure services. The empirical material is analyzed at three levels: within one supplier firm, between the client and one supplier, and among all three firms. Empirical evidences, at all levels, illustrate various deviations in governance mechanisms, with which emerging governance structures are shaped. This dissertation contributes to the understanding of ITO governance in three domains: the governance of ITO in general, the governance of multi-sourcing in particular, and research methodology. For ITO governance in general, this study has identified two research strands of governance structure and governance mechanisms, and integrated both concepts under a unified framework. The composition of four research papers contributes to multi-sourcing research by illustrating the benefits of zooming in and out across the multilateral relationships with different aspects and scopes. Methodologically, the viability and benefit of mixed-method is illustrated and confirmed for both researchers and practitioners.

Indirect Bonding Method: in vitro Comparison of the Shear Bond Strength between Metallic Orthodontic Brackets and Different Porcelain Surface Preparations

Introduction : La force d’adhésion à l'interface métal-céramique avec les résines auto-polymérisantes destinées au collage indirect des boîtiers orthodontiques n'a pas été évaluée à ce jour et un protocole clinique basé sur la littérature scientifique est inexistant. Objectifs : 1) Comparer la force de cisaillement maximale entre des boîtiers métalliques et des surfaces en porcelaine préparées selon différentes méthodes; 2) Suggérer un protocole clinique efficace et prévisible. Matériel et méthodes : Quatre-vingt-dix disques en leucite (6 groupes; n = 15/groupe) ont été préparés selon 6 combinaisons de traitements de surface : mécaniques (+ / - fraisage pour créer les rugosités) et chimiques (acide fluorhydrique, apprêt, silane). Des bases en résine composite Transbond XT (3M Unitek, Monrovia, California) faites sur mesure ont été collées avec le système de résine adhésive auto-polymérisante Sondhi A + B Rapid Set (3M Unitek, Monrovia, California). Les échantillons ont été préservés (H2O/24hrs), thermocyclés (500 cycles) et testés en cisaillement (Instron, Norwood, Massachusetts). Des mesures d’Index d’adhésif résiduel (IAR) ont été compilées. Des tests ANOVAs ont été réalisés sur les rangs étant donné que les données suivaient une distribution anormale et ont été ajustés selon Tukey. Un Kruskall-Wallis, U-Mann Whitney par comparaison pairée et une analyse de Weibull ont aussi été réalisés. Résultats : Les médianes des groupes varient entre 17.0 MPa (- fraisage + acide fluorhydrique) à 26.7 MPa (- fraisage + acide fluorhydrique + silane). Le fraisage en surface ne semble pas affecter l’adhésion. La combinaison chimique (- fraisage + silane + apprêt) a démontré des forces de cisaillement significativement plus élevées que le traitement avec (- fraisage + acide fluorhydrique), p<0,05, tout en possédant des forces similaires au protocole typiquement suggéré à l’acide fluorhydrique suivi d’une application de silane, l’équivalence de (- fraisage + acide fluorhydrique + silane). Les mesures d’IAR sont significativement plus basses dans le groupe (- fraisage + acide fluorhydrique) en comparaison avec celles des 5 autres groupes, avec p<0,05. Malheureusement, ces 5 groupes ont des taux de fracture élévés de 80 à 100% suite à la décimentation des boîtiers. Conclusion : Toutes les combinaisons de traitement de surface testées offrent une force d’adhésion cliniquement suffisante pour accomplir les mouvements dentaires en orthodontie. Une application de silane suivie d’un apprêt est forte intéressante, car elle est simple à appliquer cliniquement tout en permettant une excellente adhésion. Il faut cependant avertir les patients qu’il y a un risque de fracture des restorations en céramique lorsque vient le moment d’enlever les broches. Si la priorité est de diminuer le risque d’endommager la porcelaine, un mordançage seul à l’acide hydrofluorique sera suffisant.

Étude clinique randomisée prospective du taux de survie d'un fil lingual mandibulaire de rétention utilisant les méthodes de collage direct et indirect à court et moyen termes

Introduction : Après un traitement orthodontique, la rétention (ou contention) est essentielle pour éviter les récidives vers la malocclusion initiale. Le fil de rétention lingual est un appareil fixe, relativement facile à installer et bien accepté par les patients pour maintenir la position finale des dents antérieures inférieures. Étant de plus en plus utilisé, il devient important de s’assurer de sa fiabilité pour la stabilité de l’alignement dentaire. Objectif : Le but de cette étude clinique randomisée prospective est de déterminer le taux de survie d’un fil lingual mandibulaire de rétention en comparant les méthodes de collage direct et de collage indirect à court et moyen termes. Méthodologie : L’échantillon est constitué de 117 patients consécutifs aléatoirement distribués dans 2 groupes : collage direct (n=58) et collage indirect (n=59). Les fils torsadés de diamètre 0,0175’’ sont préformés par un technicien de laboratoire soit selon la méthode de collage direct, soit selon la méthode de collage indirect. Une matrice de transfert en silicone assure le positionnement précis du fil lingual en bouche. Assure® et Filtek™ Flow ont été utilisés pour le collage direct. Filtek™ Flow, Assure®, and Sondhi™ ont été utilisés pour le collage indirect. Les fils de rétention ont été évalués pour le décollement, l’infiltration, la distorsion et le bris à 2 mois (T1) et 6 mois (T2). Résultats : À T1, le taux de survie du fil de rétention est de 90,2% pour le groupe de collage direct, comparativement à 79,5% pour le groupe de collage indirect (p=0,232). À T2, le fil est resté intact pour 74,1% des participants dans le groupe de collage direct et pour 70,0% des participants dans le groupe de collage indirect (p=0,481). Les différences ne sont pas statistiquement significatives entre les 2 groupes. La fréquence du décollement est plus haute que les autres problèmes enregistrés à T1 (p<0,022), représentant 85,7% des échecs. À T2, le décollement est plus fréquent que la distorsion ou le bris (p<0,04), mais pas statistiquement plus fréquent que l’infiltration (p=0,109). Il représente alors 86,4% des échecs. Conclusion : Le décollement est la principale cause d’échec d’un fil de rétention lingual. Il n’y a pas de différence statistiquement significative du taux de survie d’un fil lingual mandibulaire de rétention entre les techniques de collage direct et de collage indirect à court et moyen termes.

Simultaneous estimation of indirect and interaction effects using structural equation models

Interaction effects are usually modeled by means of moderated regression analysis. Structural equation models with non-linear constraints make it possible to estimate interaction effects while correcting for measurement error. From the various specifications, Jöreskog and Yang's (1996, 1998), likely the most parsimonious, has been chosen and further simplified. Up to now, only direct effects have been specified, thus wasting much of the capability of the structural equation approach. This paper presents and discusses an extension of Jöreskog and Yang's specification that can handle direct, indirect and interaction effects simultaneously. The model is illustrated by a study of the effects of an interactive style of use of budgets on both company innovation and performance

Assessing indirect aggression in aggressors and targets : Spanish adaptation of the Indirect Aggression Scales

Resumen tomado de la publicaci??n

Indirect expropriation in concession contract

 The work aims to demonstrate that an indirect expropriation of rights occurs when mining concession agreements are made for subsoil exploitation. The article looks at examples such as when administrative divesture for public utilities or for social interest is decreed to implement projects or environmental works; when any regulation or administrative action is taken determining protected areas or environment control of type; and when environmental control plans are implemented. The indirect expropriation occurs because a conflict exists between general interests and equality principles of the burdens, the contractual right of adherence to agreed upon provisions and the legality of prior legal regulations for the carrying out of such expropriation. 

Administración en la cadena de suministro y su relación con el desempeño de las PYME del sector agroindustrial

En la actualidad las organizaciones están en búsqueda de una mejora continua, esto lleva a que las empresas hagan una revisión de estrategias que permitan alcanzar una posición de líderes en los diferentes sectores en los que se desempeñan. Una de las estrategias para lograr un alto posicionamiento en las nuevas empresas es la adecuada gestión que hacen de la cadena de suministro. El sector agroindustrial tiene un amplia cadena de suministro desde la obtención de materias primas hasta la llegada al cliente final, por su gran magnitud requiere de una adecuada administración de procesos que permitan ser eficaces y eficientes para alcanzar logros propuestos, aprovechar los recursos limitados con los que cuentan para su cumplimiento y, por último, la capacidad propia para la transformación de sus recursos. Para lograr que las empresas obtengan ventajas competitivas, es necesario que los distintos eslabones de la cadena de suministros cuenten con una capacidad de interacción que les permita, tanto agilizar como asegurar el éxito durante la incorporación de los nuevos productos en el mercado. Por medio de esta investigación se busca esclarecer y analizar la importancia de la administración en la cadena de suministro y la relación con el desempeño, basándose en las Pymes del sector agroindustrial. La intención es evaluar la información de diversos autores quienes han hablado de la relación que existe entre la cadena de suministro y su desempeño, teniendo en cuenta variables como el sector agroindustrial y las Pymes.