994 resultados para external light injection


Relevância:

30.00% 30.00%

Publicador:

Resumo:

The gain-switched, single frequency operation of an external cavity grating-coupled surface emitting laser with a wavelength tuning range of 100 nm was presented. The light in the grating section was coupled out of the laser at a specific angle to the surface of the device. Analysis showed that within the driving current range, lasing in the device only occurred when the external cavity was properly aligned.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The thesis will show how to equalise the effect of quantal noise across spatial frequencies by keeping the retinal flux (If-2) constant. In addition, quantal noise is used to study the effect of grating area and spatial frequency on contrast sensitivity resulting in the extension of the new contrast detection model describing the human contrast detection system as a simple image processor. According to the model the human contrast detection system comprises low-pass filtering due to ocular optics, addition of light dependent noise at the event of quantal absorption, high-pass filtering due to the neural visual pathways, addition of internal neural noise, after which detection takes place by a local matched filter, whose sampling efficiency decreases as grating area is increased. Furthermore, this work will demonstrate how to extract both the optical and neural modulation transfer functions of the human eye. The neural transfer function is found to be proportional to spatial frequency up to the local cut-off frequency at eccentricities of 0 - 37 deg across the visual field. The optical transfer function of the human eye is proposed to be more affected by the Stiles-Crawford -effect than generally assumed in the literature. Similarly, this work questions the prevailing ideas about the factors limiting peripheral vision by showing that peripheral optical acts as a low-pass filter in normal viewing conditions, and therefore the effect of peripheral optics is worse than generally assumed.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Here we present a compact tunable all-room-temperature frequency-doubling scheme, using a periodically poled potassium titanyl phosphate (PPKTP) waveguide and a QD-ECDL. A broad wavelength tunability of the second harmonic generated light (SHG) in the spectral region between 567.7 and 629.1 nm was achieved, with maximum conversion efficiencies in range of 0.34%-7.9%. The maximum output power for the SHG light was 4.11 mW at 591.5 nm, achieved for 52 mW of launched pump power at 1183 nm, resulting in a conversion efficiency of 7.9%.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

We demonstrate a CW tunable compact all-room-temperature laser system in the visible spectral region from 567.7 nm to 629.1 nm, by frequency doubling in a periodically-poled KTP waveguide crystal using a tunable quantum-dot external-cavity diode laser.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Here we present a compact all-room-temperature frequency-doubling scheme generating orange light, using a PPKTP waveguide and a quantum-dot external cavity diode laser (QD-ECDL). The maximum output power for the second harmonic generated light (SHG) was 1.43 mW at 613 nm, achieved for 70 mW of launched pump power at 1226 nm. This represents an important step towards a compact and wall-plug-efficient coherent orange light source, operating at room temperature.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A compact all-room-temperature frequency-doubling scheme generating cw orange light with a periodically poled potassium titanyl phosphate waveguide and a quantum-dot external cavity diode laser is demonstrated. A frequency-doubled power of up to 4.3 mW at the wavelength of 612.9 nm with a conversion efficiency exceeding 10% is reported. Second harmonic wavelength tuning between 612.9 nm and 616.3 nm by changing the temperature of the crystal is also demonstrated. © Springer-Verlag 2010.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Orange light with maximum conversion efficiency exceeding 10% and CW output power of 12.04 mW, 10.45 mW and 6.24 mW has been generated at 606, 608, and 611 nm, respectively, from a frequency-doubled InAs/GaAs quantum-dot external-cavity diode laser by use of a periodically-poled KTP waveguides with different cross-sectional areas. The wider waveguide with the cross-sectional area of 4×4 μm demonstrated better results in comparison with the narrower waveguides (3×5 μm and 2×6 μm) which corresponded to lower coupling efficiency. Additional tuning of second harmonic light (between 606 and 614 nm) with similar conversion efficiency was possible by changing the crystal temperature. © 2014 Copyright SPIE.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The movement of goods is of critical importance to an economy, especially one, which is dependent on international trade such as Ireland. Considering Irelands distribution of manufacturing and other organisations throughout the country, many firms are dependent upon road haulage effectiveness and efficiency. In recent times there has been somewhat of a growing unease in the road haulage industry in relation to increasing cost, squeezing profit margins even tighter. An understanding of the Irish road haulier’s business environment would undoubtedly shed greater light onto their situation. The paper addresses this issue with an analysis of the industry’s competitive environment. The first step of the research methodology was an intensive search for pertinent literature, from which a limited amount of information was obtained. A confined amount of primary research was then carried out. Purposive sampling was used to establish the required respondents. The techniques used were the research conversation approach in combination with semi-structured interviews. Following this a structured postal questionnaire was issued to obtain quantitative statistics. The preliminary results of which are outlined. The analysis identifies a number of issues within the Irish road haulage industry. The paper concludes with the findings that the Irish road haulage industry is at present a brutally competitive environment due to its fragmented nature and the power of its customers. It also identifies the need for further research in order to establish the validity of certain points and issues.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Internal Quantum Efficiency (IQE) of two-colour monolithic white light emitting diode (LED) was measured by temperature dependant electro-luminescence (TDEL) and analysed with modified rate equation based on ABC model. External, internal and injection efficiencies of blue and green quantum wells were analysed separately. Monolithic white LED contained one green InGaN QW and two blue QWs being separated by GaN barrier. This paper reports also the tunable behaviour of correlated colour temperature (CCT) in pulsed operation mode and effect of self-heating on device performance. © 2014 SPIE.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

VSC converters are becoming more prevalent for HVDC applications. Two circuits are commercially available at present, a traditional six-switch, PWM inverter, implemented using series connected IGBTs - ABBs HVDC Light®, and the other a modular multi-level converter (MMC) - Siemens HVDC-PLUS. This paper presents an alternative MMC topology, which utilises a novel current injection technique, and exhibits several desirable characteristics.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Internal quantum efficiency (IQE) of a blue high-brightness InGaN/GaN light-emitting diode (LED) was evaluated from the external quantum efficiency measured as a function of current at various temperatures ranged between 13 and 440 K. Processing the data with a novel evaluation procedure based on the ABC-model, we have determined the temperature-dependent IQE of the LED structure and light extraction efficiency of the LED chip. Separate evaluation of these parameters is helpful for further optimization of the heterostructure and chip designs. The data obtained enable making a guess on the temperature dependence of the radiative and Auger recombination coefficients, which may be important for identification of dominant mechanisms responsible for the efficiency droop in III-nitride LEDs. Thermal degradation of the LED performance in terms of the emission efficiency is also considered.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Open skull surgery of deeply located intracerebral lesions requires precise determination of the treatment area in 3-dimensional (3-D) space. 3-D MRI can give important additional information in presurgical determination of the surgical approach to the target, taking into account highly functional brain areas and important vascular structures. The day before surgery, a grid composed of 9 tubings intersecting at 90° at 1 cm intervals and filled with a Q1SO4 solution is firmly attached to the skin of the patient’s head in the presumed region of the craniotomy. A 3-D turbo-FLASH sequence is then performed in the sagittal plane after intravenous Gd-DOTA injection on a IT Magnetom. 3-D surface reconstruction of the cortical gyri and sulci is performed. Once the gyri are identified, the 3-D program is then implemented in order to perform a color display of the cortical veins and of the tumor boundaries. The surgical access is then chosen by the surgeon, taking into account highly functional areas. Finally, the boundaries of the tumor are projected on the cortex reconstruction and on the external reference placed on the skin. The entry place for surgery as well as the size of craniotomy are drawn on the skin and the tubed grid is removed. The accuracy of this method tested in 9 patients with deeply located brain tumors or arteriovenous malformations was very satisfactory. In daily practice, this method is a valuable technique providing important clinical information in determining the shortest and safest way through the brain tissue, decreasing possible functional deficit and reducing craniotomy size in cases of difficult to access deep brain areas. Our method does not require a stereotactic frame permanently fixed to the head of the patient during surgery. © 1994 S. Karger AG, Basel.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This study was carried out to isolate and determine bacterial agents in outer lesions of sturgeons in Shahid Dr. Beheshti sturgeon propagation and rearing center in Gilan province. Five species of sturgeons were studied from viewpoint of lesions. A number of 167 specimens of Beluga, 76 specimens of Persian sturgeon, 27 specimens of Russian sturgeon, 42 specimens of stellate and finally 23 specimens of ship had bacterial lesions in different outer parts of their bodies. After sampling and purification, bacterial cultures and biochemical tests were done. After the isolation of bacteria from lesions, Edwardsiella tarda was selected by means of PCR. To obtain molecular acceptance, a pair of E. tarda special primer, forward primer ETa2-351 and reverse primer (Edwsp-780r) were reproduced. A number of 12 E. tarda DNA sample were identified by PCR. After molecular diagnosis, Persian sturgeon challenged with E. tarda for determination of pathogenesis. Challenge method was done by means of injection of different dilutes of E. tarda into dorsal muscle. Sampling of hematopoietic organs (kidney, spleen and liver) were carried out and located in Boin's fixator to perform pathology survey. Also, in order to survey of existence and effect of E. tarda, sampling of kidney for bacterial culture was done by molecular and biochemical methods. Results showed that the most lesions in all five species belonged to abdominal surface. Skin and scutes of this part were involved in comparison with other parts. Also, It was removed some samples from lesions to pathological survey. Microscopic observations showed some levels of destruction of epidermis layers, necrosis of dermis cells and destruction of muscular layer of skin. On the other hand, invasion of inflammatory cells and haemorrhagic in dermis were clear. Based on biochemical results, Aeromonas sobria, A cavia . A. hydrophila , Acinetobacter lowffii , A.baumanni , A.cakoaceticus, Pseudomonas putida , P fluorescens , P.aeruginosa , Serratia marcescens , Escherichia coli , Enterobacter aerogenes , Edwardsiella tarda , Proteus mirabilis , kelebsiella oxytoca and Staphylococcus sp. were isolated from outer lesions. Results of PCR confirmed that E. tarda was before and after challenge in 200 bp range. LD50, 96h was determined 1.2 x 10^5 (CFU/ml). Pathological experiments showed lesions in the kidney, including hemorrhages, degeneration of glumeruli and tubular epithelia, degeneration and necrosis of interestitium tissue, accumulation of protein casts in the tubular lumen. It was observed haemorhages, engorged blood vessels, congestion of sinusoids, increased of melanine, melano macrophage centers, degeneration and necrosis of hepatocytes in the liver. In the spleen, it was recorded congestion, degeneration, necrosis changes in the white and red pulpa, blood engorged and detachment of ellipsoid wall.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

External ophthalmomyiasis is an infestation of conjunctiva with larvae or maggots of certain lies. Oestrus ovis is the most common cause of human ophthalmomyiasis. The case of a 16-yearold female is described, who presented with foreign body sensation, pain, and redness in the left eye. Slit-lamp biomicroscopy revealed 32 tiny larvae crawling around the conjunctival sac. The larvae were mechanically removed under topical anesthesia, and identiied under a light microscope as irst-stage larvae of O. ovis causing external ophthalmomyiasis. She was successfully treated with topical tobacco juice. Follow-up examination of these cases is recommended to avoid possible complications.