935 resultados para data gathering
Resumo:
The increasing diffusion of wireless-enabled portable devices is pushing toward the design of novel service scenarios, promoting temporary and opportunistic interactions in infrastructure-less environments. Mobile Ad Hoc Networks (MANET) are the general model of these higly dynamic networks that can be specialized, depending on application cases, in more specific and refined models such as Vehicular Ad Hoc Networks and Wireless Sensor Networks. Two interesting deployment cases are of increasing relevance: resource diffusion among users equipped with portable devices, such as laptops, smart phones or PDAs in crowded areas (termed dense MANET) and dissemination/indexing of monitoring information collected in Vehicular Sensor Networks. The extreme dynamicity of these scenarios calls for novel distributed protocols and services facilitating application development. To this aim we have designed middleware solutions supporting these challenging tasks. REDMAN manages, retrieves, and disseminates replicas of software resources in dense MANET; it implements novel lightweight protocols to maintain a desired replication degree despite participants mobility, and efficiently perform resource retrieval. REDMAN exploits the high-density assumption to achieve scalability and limited network overhead. Sensed data gathering and distributed indexing in Vehicular Networks raise similar issues: we propose a specific middleware support, called MobEyes, exploiting node mobility to opportunistically diffuse data summaries among neighbor vehicles. MobEyes creates a low-cost opportunistic distributed index to query the distributed storage and to determine the location of needed information. Extensive validation and testing of REDMAN and MobEyes prove the effectiveness of our original solutions in limiting communication overhead while maintaining the required accuracy of replication degree and indexing completeness, and demonstrates the feasibility of the middleware approach.
Resumo:
Data gathering, either for event recognition or for monitoring applications is the primary intention for sensor network deployments. In many cases, data is acquired periodically and autonomously, and simply logged onto secondary storage (e.g. flash memory) either for delayed offline analysis or for on demand burst transfer. Moreover, operational data such as connectivity information, node and network state is typically kept as well. Naturally, measurement and/or connectivity logging comes at a cost. Space for doing so is limited. Finding a good representative model for the data and providing clever coding of information, thus data compression, may be a means to use the available space to its best. In this paper, we explore the design space for data compression for wireless sensor and mesh networks by profiling common, publicly available algorithms. Several goals such as a low overhead in terms of utilized memory and compression time as well as a decent compression ratio have to be well balanced in order to find a simple, yet effective compression scheme.
Resumo:
Mainstream IDEs such as Eclipse support developers in managing software projects mainly by offering static views of the source code. Such a static perspective neglects any information about runtime behavior. However, object-oriented programs heavily rely on polymorphism and late-binding, which makes them difficult to understand just based on their static structure. Developers thus resort to debuggers or profilers to study the system's dynamics. However, the information provided by these tools is volatile and hence cannot be exploited to ease the navigation of the source space. In this paper we present an approach to augment the static source perspective with dynamic metrics such as precise runtime type information, or memory and object allocation statistics. Dynamic metrics can leverage the understanding for the behavior and structure of a system. We rely on dynamic data gathering based on aspects to analyze running Java systems. By solving concrete use cases we illustrate how dynamic metrics directly available in the IDE are useful. We also comprehensively report on the efficiency of our approach to gather dynamic metrics.
Resumo:
A robust understanding of Antarctic Ice Sheet deglacial history since the Last Glacial Maximum is important in order to constrain ice sheet and glacial-isostatic adjustment models, and to explore the forcing mechanisms responsible for ice sheet retreat. Such understanding can be derived from a broad range of geological and glaciological datasets and recent decades have seen an upsurge in such data gathering around the continent and Sub-Antarctic islands. Here, we report a new synthesis of those datasets, based on an accompanying series of reviews of the geological data, organised by sector. We present a series of timeslice maps for 20 ka, 15 ka, 10 ka and 5 ka, including grounding line position and ice sheet thickness changes, along with a clear assessment of levels of confidence. The reconstruction shows that the Antarctic Ice sheet did not everywhere reach the continental shelf edge at its maximum, that initial retreat was asynchronous, and that the spatial pattern of deglaciation was highly variable, particularly on the inner shelf. The deglacial reconstruction is consistent with a moderate overall excess ice volume and with a relatively small Antarctic contribution to meltwater pulse 1a. We discuss key areas of uncertainty both around the continent and by time interval, and we highlight potential priorities for future work. The synthesis is intended to be a resource for the modelling and glacial geological community.
Resumo:
An E15 Initiative think piece: Investment incentives rank among the most important policy instruments governments employ to influence the locational decisions of multinational firms. In the wake of the recent increase in locational competition and the growing impact of investment incentives and support measures for state-owned enterprises (SOEs), the need for enhanced disciplines on investment incentives has gained political and academic salience. This think piece explores the evolution of investment incentives from a development and rule-making perspective. It summarises the existing literature and examines current practices and recent trends in FDI flows and the use of various investment incentives. This is followed by a discussion of the reasons for the observed stalemate in attempts at disciplinary rule-making. The paper concludes by putting forth recommendations for data gathering and transparency that could further the move toward improved global governance founded on the increasing complementarities of trade, investment, and competition law and policy as the core pillars of a more open, inclusive, and just world economy.
Resumo:
Las Tecnologías de la Información y la Comunicación en general e Internet en particular han supuesto una revolución en nuestra forma de comunicarnos, relacionarnos, producir, comprar y vender acortando tiempo y distancias entre proveedores y consumidores. A la paulatina penetración del ordenador, los teléfonos inteligentes y la banda ancha fija y/o móvil ha seguido un mayor uso de estas tecnologías entre ciudadanos y empresas. El comercio electrónico empresa–consumidor (B2C) alcanzó en 2010 en España un volumen de 9.114 millones de euros, con un incremento del 17,4% respecto al dato registrado en 2009. Este crecimiento se ha producido por distintos hechos: un incremento en el porcentaje de internautas hasta el 65,1% en 2010 de los cuales han adquirido productos o servicios a través de la Red un 43,1% –1,6 puntos porcentuales más respecto a 2010–. Por otra parte, el gasto medio por comprador ha ascendido a 831€ en 2010, lo que supone un incremento del 10,9% respecto al año anterior. Si segmentamos a los compradores según por su experiencia anterior de compra podemos encontrar dos categorías: el comprador novel –que adquirió por primera vez productos o servicios en 2010– y el comprador constante –aquel que había adquirido productos o servicios en 2010 y al menos una vez en años anteriores–. El 85,8% de los compradores se pueden considerar como compradores constantes: habían comprado en la Red en 2010, pero también lo habían hecho anteriormente. El comprador novel tiene un perfil sociodemográfico de persona joven de entre 15–24 años, con estudios secundarios, de clase social media y media–baja, estudiante no universitario, residente en poblaciones pequeñas y sigue utilizando fórmulas de pago como el contra–reembolso (23,9%). Su gasto medio anual ascendió en 2010 a 449€. El comprador constante, o comprador que ya había comprado en Internet anteriormente, tiene un perfil demográfico distinto: estudios superiores, clase alta, trabajador y residente en grandes ciudades, con un comportamiento maduro en la compra electrónica dada su mayor experiencia –utiliza con mayor intensidad canales exclusivos en Internet que no disponen de tienda presencial–. Su gasto medio duplica al observado en compradores noveles (con una media de 930€ anuales). Por tanto, los compradores constantes suponen una mayoría de los compradores con un gasto medio que dobla al comprador que ha adoptado el medio recientemente. Por consiguiente es de interés estudiar los factores que predicen que un internauta vuelva a adquirir un producto o servicio en la Red. La respuesta a esta pregunta no se ha revelado sencilla. En España, la mayoría de productos y servicios aún se adquieren de manera presencial, con una baja incidencia de las ventas a distancia como la teletienda, la venta por catálogo o la venta a través de Internet. Para dar respuesta a las preguntas planteadas se ha investigado desde distintos puntos de vista: se comenzará con un estudio descriptivo desde el punto de vista de la demanda que trata de caracterizar la situación del comercio electrónico B2C en España, poniendo el foco en las diferencias entre los compradores constantes y los nuevos compradores. Posteriormente, la investigación de modelos de adopción y continuidad en el uso de las tecnologías y de los factores que inciden en dicha continuidad –con especial interés en el comercio electrónico B2C–, permiten afrontar el problema desde la perspectiva de las ecuaciones estructurales pudiendo también extraer conclusiones de tipo práctico. Este trabajo sigue una estructura clásica de investigación científica: en el capítulo 1 se introduce el tema de investigación, continuando con una descripción del estado de situación del comercio electrónico B2C en España utilizando fuentes oficiales (capítulo 2). Posteriormente se desarrolla el marco teórico y el estado del arte de modelos de adopción y de utilización de las tecnologías (capítulo 3) y de los factores principales que inciden en la adopción y continuidad en el uso de las tecnologías (capítulo 4). El capítulo 5 desarrolla las hipótesis de la investigación y plantea los modelos teóricos. Las técnicas estadísticas a utilizar se describen en el capítulo 6, donde también se analizan los resultados empíricos sobre los modelos desarrollados en el capítulo 5. El capítulo 7 expone las principales conclusiones de la investigación, sus limitaciones y propone nuevas líneas de investigación. La primera parte corresponde al capítulo 1, que introduce la investigación justificándola desde un punto de vista teórico y práctico. También se realiza una breve introducción a la teoría del comportamiento del consumidor desde una perspectiva clásica. Se presentan los principales modelos de adopción y se introducen los modelos de continuidad de utilización que se estudiarán más detalladamente en el capítulo 3. En este capítulo se desarrollan los objetivos principales y los objetivos secundarios, se propone el mapa mental de la investigación y se planifican en un cronograma los principales hitos del trabajo. La segunda parte corresponde a los capítulos dos, tres y cuatro. En el capítulo 2 se describe el comercio electrónico B2C en España utilizando fuentes secundarias. Se aborda un diagnóstico del sector de comercio electrónico y su estado de madurez en España. Posteriormente, se analizan las diferencias entre los compradores constantes, principal interés de este trabajo, frente a los compradores noveles, destacando las diferencias de perfiles y usos. Para los dos segmentos se estudian aspectos como el lugar de acceso a la compra, la frecuencia de compra, los medios de pago utilizados o las actitudes hacia la compra. El capítulo 3 comienza desarrollando los principales conceptos sobre la teoría del comportamiento del consumidor, para continuar estudiando los principales modelos de adopción de tecnología existentes, analizando con especial atención su aplicación en comercio electrónico. Posteriormente se analizan los modelos de continuidad en el uso de tecnologías (Teoría de la Confirmación de Expectativas; Teoría de la Justicia), con especial atención de nuevo a su aplicación en el comercio electrónico. Una vez estudiados los principales modelos de adopción y continuidad en el uso de tecnologías, el capítulo 4 analiza los principales factores que se utilizan en los modelos: calidad, valor, factores basados en la confirmación de expectativas –satisfacción, utilidad percibida– y factores específicos en situaciones especiales –por ejemplo, tras una queja– como pueden ser la justicia, las emociones o la confianza. La tercera parte –que corresponde al capítulo 5– desarrolla el diseño de la investigación y la selección muestral de los modelos. En la primera parte del capítulo se enuncian las hipótesis –que van desde lo general a lo particular, utilizando los factores específicos analizados en el capítulo 4– para su posterior estudio y validación en el capítulo 6 utilizando las técnicas estadísticas apropiadas. A partir de las hipótesis, y de los modelos y factores estudiados en los capítulos 3 y 4, se definen y vertebran dos modelos teóricos originales que den respuesta a los retos de investigación planteados en el capítulo 1. En la segunda parte del capítulo se diseña el trabajo empírico de investigación definiendo los siguientes aspectos: alcance geográfico–temporal, tipología de la investigación, carácter y ambiente de la investigación, fuentes primarias y secundarias utilizadas, técnicas de recolección de datos, instrumentos de medida utilizados y características de la muestra utilizada. Los resultados del trabajo de investigación constituyen la cuarta parte de la investigación y se desarrollan en el capítulo 6, que comienza analizando las técnicas estadísticas basadas en Modelos de Ecuaciones Estructurales. Se plantean dos alternativas, modelos confirmatorios correspondientes a Métodos Basados en Covarianzas (MBC) y modelos predictivos. De forma razonada se eligen las técnicas predictivas dada la naturaleza exploratoria de la investigación planteada. La segunda parte del capítulo 6 desarrolla el análisis de los resultados de los modelos de medida y modelos estructurales construidos con indicadores formativos y reflectivos y definidos en el capítulo 4. Para ello se validan, sucesivamente, los modelos de medida y los modelos estructurales teniendo en cuenta los valores umbrales de los parámetros estadísticos necesarios para la validación. La quinta parte corresponde al capítulo 7, que desarrolla las conclusiones basándose en los resultados del capítulo 6, analizando los resultados desde el punto de vista de las aportaciones teóricas y prácticas, obteniendo conclusiones para la gestión de las empresas. A continuación, se describen las limitaciones de la investigación y se proponen nuevas líneas de estudio sobre distintos temas que han ido surgiendo a lo largo del trabajo. Finalmente, la bibliografía recoge todas las referencias utilizadas a lo largo de este trabajo. Palabras clave: comprador constante, modelos de continuidad de uso, continuidad en el uso de tecnologías, comercio electrónico, B2C, adopción de tecnologías, modelos de adopción tecnológica, TAM, TPB, IDT, UTAUT, ECT, intención de continuidad, satisfacción, confianza percibida, justicia, emociones, confirmación de expectativas, calidad, valor, PLS. ABSTRACT Information and Communication Technologies in general, but more specifically those related to the Internet in particular, have changed the way in which we communicate, relate to one another, produce, and buy and sell products, reducing the time and shortening the distance between suppliers and consumers. The steady breakthrough of computers, Smartphones and landline and/or wireless broadband has been greatly reflected in its large scale use by both individuals and businesses. Business–to–consumer (B2C) e–commerce reached a volume of 9,114 million Euros in Spain in 2010, representing a 17.4% increase with respect to the figure in 2009. This growth is due in part to two different facts: an increase in the percentage of web users to 65.1% en 2010, 43.1% of whom have acquired products or services through the Internet– which constitutes 1.6 percentage points higher than 2010. On the other hand, the average spending by individual buyers rose to 831€ en 2010, constituting a 10.9% increase with respect to the previous year. If we select buyers according to whether or not they have previously made some type of purchase, we can divide them into two categories: the novice buyer–who first made online purchases in 2010– and the experienced buyer: who also made purchases in 2010, but had done so previously as well. The socio–demographic profile of the novice buyer is that of a young person between 15–24 years of age, with secondary studies, middle to lower–middle class, and a non–university educated student who resides in smaller towns and continues to use payment methods such as cash on delivery (23.9%). In 2010, their average purchase grew to 449€. The more experienced buyer, or someone who has previously made purchases online, has a different demographic profile: highly educated, upper class, resident and worker in larger cities, who exercises a mature behavior when making online purchases due to their experience– this type of buyer frequently uses exclusive channels on the Internet that don’t have an actual store. His or her average purchase doubles that of the novice buyer (with an average purchase of 930€ annually.) That said, the experienced buyers constitute the majority of buyers with an average purchase that doubles that of novice buyers. It is therefore of interest to study the factors that help to predict whether or not a web user will buy another product or use another service on the Internet. The answer to this question has proven not to be so simple. In Spain, the majority of goods and services are still bought in person, with a low amount of purchases being made through means such as the Home Shopping Network, through catalogues or Internet sales. To answer the questions that have been posed here, an investigation has been conducted which takes into consideration various viewpoints: it will begin with a descriptive study from the perspective of the supply and demand that characterizes the B2C e–commerce situation in Spain, focusing on the differences between experienced buyers and novice buyers. Subsequently, there will be an investigation concerning the technology acceptance and continuity of use of models as well as the factors that have an effect on their continuity of use –with a special focus on B2C electronic commerce–, which allows for a theoretic approach to the problem from the perspective of the structural equations being able to reach practical conclusions. This investigation follows the classic structure for a scientific investigation: the subject of the investigation is introduced (Chapter 1), then the state of the B2C e–commerce in Spain is described citing official sources of information (Chapter 2), the theoretical framework and state of the art of technology acceptance and continuity models are developed further (Chapter 3) and the main factors that affect their acceptance and continuity (Chapter 4). Chapter 5 explains the hypothesis behind the investigation and poses the theoretical models that will be confirmed or rejected partially or completely. In Chapter 6, the technical statistics that will be used are described briefly as well as an analysis of the empirical results of the models put forth in Chapter 5. Chapter 7 explains the main conclusions of the investigation, its limitations and proposes new projects. First part of the project, chapter 1, introduces the investigation, justifying it from a theoretical and practical point of view. It is also a brief introduction to the theory of consumer behavior from a standard perspective. Technology acceptance models are presented and then continuity and repurchase models are introduced, which are studied more in depth in Chapter 3. In this chapter, both the main and the secondary objectives are developed through a mind map and a timetable which highlights the milestones of the project. The second part of the project corresponds to Chapters Two, Three and Four. Chapter 2 describes the B2C e–commerce in Spain from the perspective of its demand, citing secondary official sources. A diagnosis concerning the e–commerce sector and the status of its maturity in Spain is taken on, as well as the barriers and alternative methods of e–commerce. Subsequently, the differences between experienced buyers, which are of particular interest to this project, and novice buyers are analyzed, highlighting the differences between their profiles and their main transactions. In order to study both groups, aspects such as the place of purchase, frequency with which online purchases are made, payment methods used and the attitudes of the purchasers concerning making online purchases are taken into consideration. Chapter 3 begins by developing the main concepts concerning consumer behavior theory in order to continue the study of the main existing acceptance models (among others, TPB, TAM, IDT, UTAUT and other models derived from them) – paying special attention to their application in e–commerce–. Subsequently, the models of technology reuse are analyzed (CDT, ECT; Theory of Justice), focusing again specifically on their application in e–commerce. Once the main technology acceptance and reuse models have been studied, Chapter 4 analyzes the main factors that are used in these models: quality, value, factors based on the contradiction of expectations/failure to meet expectations– satisfaction, perceived usefulness– and specific factors pertaining to special situations– for example, after receiving a complaint justice, emotions or confidence. The third part– which appears in Chapter 5– develops the plan for the investigation and the sample selection for the models that have been designed. In the first section of the Chapter, the hypothesis is presented– beginning with general ideas and then becoming more specific, using the detailed factors that were analyzed in Chapter 4– for its later study and validation in Chapter 6– as well as the corresponding statistical factors. Based on the hypothesis and the models and factors that were studied in Chapters 3 and 4, two original theoretical models are defined and organized in order to answer the questions posed in Chapter 1. In the second part of the Chapter, the empirical investigation is designed, defining the following aspects: geographic–temporal scope, type of investigation, nature and setting of the investigation, primary and secondary sources used, data gathering methods, instruments according to the extent of their use and characteristics of the sample used. The results of the project constitute the fourth part of the investigation and are developed in Chapter 6, which begins analyzing the statistical techniques that are based on the Models of Structural Equations. Two alternatives are put forth: confirmatory models which correspond to Methods Based on Covariance (MBC) and predictive models– Methods Based on Components–. In a well–reasoned manner, the predictive techniques are chosen given the explorative nature of the investigation. The second part of Chapter 6 explains the results of the analysis of the measurement models and structural models built by the formative and reflective indicators defined in Chapter 4. In order to do so, the measurement models and the structural models are validated one by one, while keeping in mind the threshold values of the necessary statistic parameters for their validation. The fifth part corresponds to Chapter 7 which explains the conclusions of the study, basing them on the results found in Chapter 6 and analyzing them from the perspective of the theoretical and practical contributions, and consequently obtaining conclusions for business management. The limitations of the investigation are then described and new research lines about various topics that came up during the project are proposed. Lastly, all of the references that were used during the project are listed in a final bibliography. Key Words: constant buyer, repurchase models, continuity of use of technology, e–commerce, B2C, technology acceptance, technology acceptance models, TAM, TPB, IDT, UTAUT, ECT, intention of repurchase, satisfaction, perceived trust/confidence, justice, feelings, the contradiction of expectations, quality, value, PLS.
Resumo:
A piece of research is presented that was conducted on the Guayanes Farmhouse Telita Cheese Producers Network located in the Piar and Padre Chien rural municipalities of Bolivar state in Venezuela. Guayanes telita cheese is a regional dairy product. The producers are to be found in a rural area with a high potential for marketing the label in the Southern Common Market (MERCOSUR). This market is the focal point of the strategic importance of this study for the Region and the Country. The research is of a descriptive scope conducted in the field. A questionnaire based on good food production practice was used as a data gathering technique. The final sample comprised 30 production units. Statistical processing was performed with version 15.2 of the STATGRAPHICS Centurion computational tool. The results would appear to confirm previous studies that point to the existence of factors that prevent these Micro-SMEs from guaranteeing the food safety of the product. The results indicate that new lines of research need to be opened up. These are oriented towards formulating strategies for the continuous improvement of these micro-SMEs, including quality control indicators.
Resumo:
Fundamento de la tesis: Al comienzo del siglo XX, el interés por el turismo unido a la necesidad de restaurar un abundante patrimonio histórico, posibilitó en España que los poderes públicos se embarcaran en una singular experiencia: la creación de una infraestructura hotelera a partir de la rehabilitación de edificios históricos. La preservación, mantenimiento e incluso rentabilidad de una gran parte del patrimonio español se haría efectiva a través de la innovadora fórmula patrimonio‐turismo, cuya máxima expresión se materializó en la Red de Paradores desde su fundación en la segunda década del siglo pasado hasta nuestros días. Sorprendentemente, este tema no ha sido todavía investigado en su vertiente arquitectónica pese a que España ha sido pionera y modelo en la cuestión de la hotelería pública. Este trabajo aborda el estudio del caso más significativo de todos los edificios de la red, en tanto que el patrimonio que ha servido de base a los fines hoteleros del Estado ha contado con un total de seis tipos arquitectónicos a lo largo de su historia, dentro de los cuales la arquitectura militar despunta con su mayoritaria presencia dentro del contexto de los edificios históricos de la red. El carácter arquetípico de los castillos y fortalezas, arraigado en el inconsciente colectivo, les hizo especialmente atractivos como alojamiento turístico al permitir evocar la remota época medieval, pese a ser el tipo arquitectónico más comprometido para la rehabilitación hotelera. El estudio de las intervenciones operadas en estos inmuebles se revela de forma clara como escaparate de los distintos criterios de intervención patrimonial que se han sucedido en el siglo XX, hasta enlazar con la perspectiva interdisciplinar actual. La tesis abarca en, primer lugar, diferentes aspectos generales relativos al promotor hotelero, la hotelería pública de ámbito nacional e internacional, y la caracterización de los inmuebles de la red estatal española, desde el punto de vista hotelero y arquitectónico, entendida esta última en sus tres escalas de influencia: la arquitectónica, la urbana o paisajística, y la del interiorismo. Se analiza en segundo término la arquitectura militar dentro del contexto de la Red de Paradores, desde la consideración de su transformación hotelera, para lo cual ha sido necesario realizar una clasificación propia, que abarca tanto edificios que respondieron a una estructura de cuartel, como castillos‐palacio, o fortalezas que habían servido a los fines de una orden religiosa militar, además de considerarse las intervenciones en recintos históricos de carácter militar, donde se hacía obligatorio construir de nueva planta. En tercer y último lugar, se analiza a lo largo de las distintas etapas del organismo turístico las rehabilitaciones realizadas en estas construcciones militares, a la vez que se tienen en cuenta las intervenciones en los restantes edificios históricos, para evitar la descontextualización. Este recorrido comienza con la promoción de los dos primeros paradores a cargo del Comisario Regio, el marqués de la Vega‐Inclán, que sirvieron para sentar las bases de los conceptos e ideas que habrían de desarrollarse en las siguientes décadas. Posteriormente, se desarrolló y tomó forma la red con el Patronato Nacional del Turismo, en la que las primeras intervenciones en tipos militares se tradujeron en reformas interiores de locales. La etapa clave de la red, y en particular de la arquitectura militar, tuvo lugar con el Ministerio de Información y Turismo, marcada por la “repristinación” de monumentos, tras un período preparatorio con la Dirección General del Turismo en el que lo militar había quedado de telón de fondo de otros tipos arquitectónicos. Tras el auge del Ministerio llegó el período de decadencia en el que los castillos y fortalezas desaparecieron de los intereses de las Secretarias de Turismo, hasta llegar a las inauguraciones de los novedosos establecimientos del siglo XXI y el resurgimiento del tipo militar con el parador de Lorca. Metodología empleada: Este trabajo de investigación se ha servido fundamentalmente de documentación inédita, procedente de diversos archivos, además de una muy extensa toma de datos in situ. Dentro del patrimonio analizado, los inmuebles que responden al tipo arquitectónico militar se han dividido en tres grandes grupos: inmuebles rehabilitados que entraron en funcionamiento en la red, inmuebles en proceso de transformación hotelera, e inmuebles que fueron adquiridos con fines hoteleros pero que no llegaron a rehabilitarse. Para cada uno de ellos ha sido necesario determinar en qué estado llegaron a manos de la Administración Turística, cuál fue el mecanismo a través del cual se adquirieron, en qué consistió su primera rehabilitación hotelera, y cuáles fueron las ampliaciones o reformas más significativas que se realizaron posteriormente. Estos datos se han sintetizado en fichas y se han extraído conclusiones al comparar cada unidad con el conjunto. Simultáneamente se introdujeron dos factores externos: la historia del turismo que permitió hacer una ordenación cronológica de los inmuebles según etapas, y la historia de la teoría y práctica de la intervención patrimonial en España que permitió comparar los criterios patrimoniales de la Administración competente respecto de las intervenciones de la Administración Turística, cuyo contacto se haría obligatorio a partir del Decreto, de 22 de abril de 1949, que dejaba bajo la tutela del Estado a todos los castillos y fortalezas. Aportación de la tesis: Con carácter general, la tesis centra una ordenación y sistematización completa del patrimonio inmobiliario de la red, desde el punto de vista de los tipos hoteleros y arquitectónicos, además de poner por primera vez en conexión distintos modelos de hotelería pública, para constituirse en el sustrato de futuras investigaciones. El estudio realizado se ha hecho extensivo a las distintas escalas que inciden de forma interconectada en la implantación de un parador: la arquitectónica, la urbana y la del interiorismo, hasta ahora referenciado desde la exclusiva visión arquitectónica. Se han definido las etapas de la historia de la red, no ya sólo a partir del hilo conductor de la cadena sucesiva de organismos turísticos, sino que por primera vez se hace en razón de la evolución que sufren las intervenciones patrimoniales a lo largo del tiempo, a la vez que se entra en conexión con la teoría y praxis de la restauración monumental. Con carácter particular, la arquitectura militar dentro del contexto de los paradores se destaca en el período del Ministerio, en el que se experimentaron todas las posibilidades que presentaba su rehabilitación. En este sentido se ha puesto de manifiesto en este trabajo un tipo híbrido de parador, a caballo entre la rehabilitación y la edificación de nueva planta, las dos formas básicas de establecimiento creadas en la Comisaría Regia, al que se ha denominado edificación de nueva planta en recinto histórico militar. Esta nueva caracterización se ha valorado como la forma más eficiente de implantar paradores, cuyas pautas arquitectónicas abarcaron un abanico de posibilidades: imitación de modelos arquitectónicos históricos con utilización de elementos patrimoniales prestados que dieran el valor de la historia, utilización de un lenguaje moderno, o la inspiración en la arquitectura vernácula. La amalgama de elementos, estilos e intervenciones sucesivas de ampliación fue la característica común tanto para la implantación de un parador en un edificio como en un recinto amurallado. La arquitectura militar transformada en establecimiento hotelero evidencia la vocación escenográfica de las intervenciones patrimoniales, secundada por el interiorismo, además de su aportación a la arquitectura hotelera en lo referente al confort, organización y funcionamiento de sus instalaciones. La tesis ahonda en los diversos aspectos de la rehabilitación hotelera apuntados de forma parcial por algunos autores, y pone de manifiesto la “ambientación medieval” operada en la arquitectura militar, que llegó a tener su máxima expresión con el criterio de la “unidad de estilo” del Ministerio de Información y Turismo. La rehabilitación hotelera dentro del contexto de la Red de Paradores, queda caracterizada en la tesis en relación a intervenciones en construcciones militares, cuya sistematización puede ser extrapolable a otros tipos arquitectónicos o cadenas hoteleras de titularidad pública, a partir del estudio que se ha avanzado en este trabajo. Thesis basis: At the beginning of the 20th century the interest in tourism added to the plentiful heritage in Spain enabled the authorities to embark on a singular experience: the creation of a hotel infrastructure from the restoration of historic buildings. Preservation, maintenance, and even profitability of a large part of the Spanish heritage would be effective through the innovative formula heritage-tourism. Its greatest expression materialized in the Paradores Network since its foundation in last century’s second decade to the present day. Surprisingly, this subject has not yet been investigated in its architectural aspect, even though Spain has been a pioneer and a model in the matter of public hotel business. This project tackles the study of the most significative case of all the network’s buildings, since the heritage which has served throughout history as a base for the State hotel purposes has altogether six architectural types, among which military architecture stands out with its majority presence in the context of the historical buildings of the network. The archetypal character of castles and fortresses, ingrained in the collective subconscious, made them specially attractive for tourist accommodation, as it allowed the evocation of far medieval times, despite being the most awkward architectural type for hotel restoration. The study of the interventions in these buildings clearly reveals itself as a showcase of the different criteria of heritage intervention along the 20th century, connecting to the present interdisciplinary perspective. Firstly, the thesis covers different general aspects regarding the hotel developer, the domestic and international public hotel business, and the description of the Spanish state network buildings from a hotel business and an architectural point of view, the latter from its three influence scales: architectural, urban or landscape, and interior design. Secondly, the transformation of the military architecture in the Paradores Network into hotels is analyzed. For that purpose it was necessary to create a specific classification, which included barrack-structured buildings, castle-palaces, or fortresses which served the purposes of military-religious orders. The interventions in those military historical places where new building became compulsory were also taken into consideration. Thirdly and lastly, the thesis analyses the restorations in these military constructions through the different stages of the tourist organization. In order to avoid decontextualization, interventions in other historical buildings were also considered. This route begins with the promotion of the two first Paradores by the Royal Commissioner, the marquis of Vega-Inclán, which paved the way for the concepts and ideas that were developed in the following decades. Subsequently, the network was developed and took shape with the National Tourism Board. The first interventions on military types were inside refurbishments. The Network’s key period, and in particular of its military architecture, took place with the Ministry of Information and Tourism, a time marked by the “restoration to its original state” of monuments. This stage arrived after a preparatory period with the State Tourist Office, when the military type was left as a backdrop for other architectural types. After the Ministry’s boom arrived a decline, in which castles and fortresses disappeared from the Tourist Department’s interests up to the opening of the 21st century new establishments and the resurgence of the military type with Lorca’s Parador. Methodology: The present research project has mainly used unpublished documentation from several archives and has done an extensive in situ data-gathering. Within the heritage analyzed, military buildings have been divided into three main groups: restored buildings that began to operate in the network, those in process of hotel transformation, and those acquired for hotel purposes, but which did not become restored. In each case, it has been necessary to determine the condition in which they arrived to the Tourist Administration, the procedure by which they were acquired, what their first hotel restoration consisted of, and which their subsequent most significative enlargements and alterations were. These facts have been synthesized in cards, and conclusions were drawn by comparing each unit with the whole. Simultaneously, two external factors were introduced: the history of tourism, that allowed establishing a chronological order according to different periods, and the history of Spanish heritage intervention’s theory and practice, that permitted to compare the heritage criteria from the competent Administration with those of the Tourist Administration’s interventions. Both Administrations came compulsorily into contact after the Decree of 22nd April 1949, by which all castles and fortresses became under the protection of the State. Thesis contribution: In general, the thesis focuses on a complete order and systematization of the network’s heritage buildings from the hotel and architectural types points of view, besides connecting for the first time different public hotel business models, becoming the substratum for future investigations. The study has included the different scales that impact interconnected on the establishment of a Parador: architectural, urban and interior design, only referenced to date from an architectural point of view. The Network’s history stages have been defined according to not only a consecutive series of tourist organizations, but also, and for the first time, to the evolution of heritage interventions over time, thus connecting with the theory and praxis of monumental restoration. In particular, within the Paradores, military architecture stands out in the Ministry’s period, in which all kind of restoration possibilities were explored. In this sense, the present project puts forth a hybrid type of Parador between restoration and new building, the two basic ways of establishment created in the Royal Commission, termed new building in military historic enclosure. This new characterization has been evaluated as the most efficient for establishing Paradores, whose architectonic guidelines include a wide range of possibilities: the imitation of historical architectonic models with use of borrowed heritage components that provide historical value, the use of modern language, or the inspiration in vernacular architecture. The amalgam of elements, styles and consecutive enlargement interventions was the common feature of the establishment of a Parador, both in a building or in a walled enclosure. The military architecture transformed into a hotel establishment gives proof of the scenographic vocation of heritage interventions, supported by interior design, as well as of its contribution to hotel architecture, related to its comfort, organization and the functioning of its facilities. The thesis delves into the diverse aspects of hotel restoration, partially pointed out by several authors, and puts forth the creation of a “medieval atmosphere” in military architecture, which came to its highest expression with the “unitary style” criteria of the Ministry of Information and Tourism. Hotel restoration within the context of the Paradores’ Network is defined in this thesis in relation to interventions in military constructions, whose systemization can be extrapolative to other architectural types or public hotel chains, based on the study which has been put forward in this project.
Resumo:
In this work a novel wake-up architecture for wireless sensor nodes based on ultra low power FPGA is presented. A simple wake up messaging mechanism for data gathering applications is proposed. The main goal of this work is to evaluate the utilization of low power configurable devices to take advantage of their speed, flexibility and low power consumption compared with traditional approaches, based on ASICs or microcontrollers, for frame decoding and data control. A test bed based on infrared communications has been built to validate the messaging mechanism and the processing architecture.
Resumo:
We propose the Route-back Delivery (RBD) protocol; a routing mechanism to create reverse routes exploiting the Collection Tree Protocol to allow unicast data dissemination from the sink. The main goal of this work is to provide a mechanism to enable bi-directional communications among the root(s) and specific sensor nodes in data gathering applications that does not use broadcast only mechanisms. The main objective of the root-to-remote-nodes route creation is to disseminate short messages to change application parameters in a unicast fashion. This facilitates remote configurability in heterogeneous WSN deployments.
Resumo:
Ambient Intelligence could support innovative application domains like motor impairments' detection at the home environment. This research aims to prevent neurodevelopmental disorders through the natural interaction of the children with embedded intelligence daily life objects, like home furniture and toys. Designed system uses an interoperable platform to provide two intelligent interrelated home healthcare services: monitoring of children¿s abilities and completion of early stimulation activities. A set of sensors, which are embedded within the rooms, toys and furniture, allows private data gathering about the child's interaction with the environment. This information feeds a reasoning subsystem, which encloses an ontology of neurodevelopment items, and adapts the service to the age and acquisition of expected abilities. Next, the platform proposes customized stimulation services by taking advantage of the existing facilities at the child's environment. The result integrates Embedded Sensor Systems for Health at Mälardalen University with UPM Smart Home, for adapted services delivery.
Resumo:
Currently personal data gathering in online markets is done on a far larger scale and much cheaper and faster than ever before. Within this scenario, a number of highly relevant companies for whom personal data is the key factor of production have emerged. However, up to now, the corresponding economic analysis has been restricted primarily to a qualitative perspective linked to privacy issues. Precisely, this paper seeks to shed light on the quantitative perspective, approximating the value of personal information for those companies that base their business model on this new type of asset. In the absence of any systematic research or methodology on the subject, an ad hoc procedure is developed in this paper. It starts with the examination of the accounts of a number of key players in online markets. This inspection first aims to determine whether the value of personal information databases is somehow reflected in the firms’ books, and second to define performance measures able to capture this value. After discussing the strengths and weaknesses of possible approaches, the method that performs best under several criteria (revenue per data record) is selected. From here, an estimation of the net present value of personal data is derived, as well as a slight digression into regional differences in the economic value of personal information.
Resumo:
La tesis indaga sobre la capacidad del arte como elemento de transformación de la ciudad. La práctica cada vez más común de la instalación de obras de arte efímero en el espacio público de las ciudades produce alteraciones reales del paisaje urbano. En el caso de la ciudad de Madrid la proliferación de obras de arte efímero en sus calles y plazas más céntricas se ha materializado de forma intensa desde los primeros años del siglo XXI. Este trabajo de investigación estudia un intervalo de cinco años representativos para Madrid (2007-2011) por la cantidad y la trascendencia de las intervenciones de arte público temporal y de arte urbano en su espacio público. Con la recopilación, el análisis, la categorización y evaluación de casi trescientos ejemplos de manifestaciones artísticas efímeras en Madrid se establecen conclusiones sobre la repercusión del arte en la transformación de ciertos procesos urbanos. La constatación de la existencia de un movimiento de arte urbano en el siglo XXI permite tratar un tema necesario en el momento actual: la revitalización del espacio urbano a través del arte. La tesis trata de describir conceptualmente una forma novedosa de arte que puede ser un motor de procesos participativos urbanos directos y decisorios. ABSTRACT This thesis makes a research about the ability of art as an element of transformation inside the city. The increasingly common practice of ephemeral art installations in urban public spaces is provoking real changes in the cities landscape. In the case of Madrid the proliferation of ephemeral artworks in the most busy streets and squares has been brought into life as an intense activity from the first years of the 21st century. This research paper studies a span of five years which have been quite representative to Madrid (2007-2011) because of the big amount of meaningful interventions that have taken place both as temporary art and as urban art in its public spaces. Through data-gathering, analysis, classification and assessment of almost three hundred examples of ephemeral art forms in Madrid, several conclusions can be stated on the impact of art in transforming certain urban processes. This evidence of the existence of an urban art movement in the 21st century opens a necessary debate subject at this moment: the regeneration of urban space through art. This thesis aims at conceptually describe this newborn artistic expressions of art, seen as a driving force for providing more direct and participatory urban decision-making processes.