Influência da substituição de areia natural por pó de pedra no comportamento mecânico, microestrutural e eletroquímico de concretos

The construction industry is one of the largest consumers of natural raw materials, and concrete is considered today the most used material wide. This accentuated consumption of natural resources has generated concern with the preservation of the environment, and has motivated various studies related to the use of resid ues, which can partially or entirely substitute, with satisfactory performance, some materials such as the aggregate, and in so doing, decrease the impact on the environment caused by the produced residues. Research has been done to better understand and improve the microstructure of concrete, as well as to understand the mechanism of corrosion in reinforced steel. In this context, this work was developed aiming at discovering the influence of the substitution of natural sand by artificial sand, with rega rd to mechanical resistance, microstructure, and durability. To obtain the electrochemical parameters, an adaptation was made to the galvanostatic electrochemical method to study the corrosion in reinforced steel. Concretes of categories 20 MPa and 40 MPa were produced, containing natural sand, and concretes of the same categories were produced with artificial sand substituting the natural sand, and with the addition of sodium nitrate and sodium chloride. Due to the use of rock dust reject (artificial sand), an evaluation was made of its environmental risk. The results indicate that the concretes of category 20 MPa present a better performance than the concrete made with natural sand, thus making it a viable substitute. For the category 40 MPa, the better performance is from the concrete containing natural sand. The adaptation of the galvanostatic electrochemical technique to the study of the corrosion of reinforced steel within concrete proved to be valid for obtaining electrochemical parameters with a high degree of reliability, considering the number of degrees of freedom

Desenvolvimento de um sistema Inteligente para a análise de cartas dinamométricas no método de elevação por bombeio mecânico

The artificial lifting of oil is needed when the pressure of the reservoir is not high enough so that the fluid contained in it can reach the surface spontaneously. Thus the increase in energy supplies artificial or additional fluid integral to the well to come to the surface. The rod pump is the artificial lift method most used in the world and the dynamometer card (surface and down-hole) is the best tool for the analysis of a well equipped with such method. A computational method using Artificial Neural Networks MLP was and developed using pre-established patterns, based on its geometry, the downhole card are used for training the network and then the network provides the knowledge for classification of new cards, allows the fails diagnose in the system and operation conditions of the lifting system. These routines could be integrated to a supervisory system that collects the cards to be analyzed

Influência da adição de gres porcelanato no comportamento mecânico e microestrutural em pastas de cimento portland para cimentação de poços de petróleo

Cementation operation consists in an extremely important work for the phases of perforation and completion of oil wells, causing a great impact on the well productivity. Several problems can occur with the cement during the primary cementation, as well as throughout the productive period. The corrective operations are frequent, but they are expensive and demands production time. Besides the direct cost, prejudices from the interruption of oil and gas production till the implementation of a corrective operation must be also taken into account. The purpose of this work is the development of an alternative cement paste constituted of Portland cement and porcelainized stoneware residue produced by ceramic industry in order to achieve characteristics as low permeability, high tenacity, and high mechanical resistance, capable of supporting various operations as production or oil wells recuperation. Four different concentration measures of hydrated paste were evaluated: a reference paste, and three additional ones with ceramic residue in concentrations of the order of 10%, 20% and 30% in relation to cement dough. High resistance and low permeability were found in high concentration of residues, as well as it was proved the pozolanic reactivity of the residue in relation to Portland cement, which was characterized through x-ray and thermogravimetry assays. It was evident the decrease of calcium hydroxide content, once it was substituted by formation of new hydrated products as it was added ceramic residue

Simulador de dano à formação, aplicado ao Projeto e à execução da perfuração de poços de petróleo

With the high oil price variability, the petroleum and the reservoir engineers are usually face to face on how they can evaluate the well performance and productivity. They can improve high productivity from the well construction to the secondary recoveries, but they have never tried a measurement in the drilling operations about the lower productivity index. As a rule, frequently the drilling operations hear from the reservoir engineering and geology that, if there is a formation damage, probably some drilling operations practices were not done properly or the good practice in petroleum engineering or mud engineering were not observed. The study in this working search is an attempt of how to measure a formation damage just from the project drilling to the drilling operations, with datum from the fields in Brazilian northeast and putting into practice a Simulator developed from the modeling on the theory offered by different experts and sources in formation damage

Modelagem e simulação de um sistema de bombeio mecânico em poços direcionais utilizando parâmetros concentrados

This work aims presenting the development of a model and computer simulation of a sucker rod pumping system. This system take into account the well geometry, the flow through the tubing, the dynamic behavior of the rod string and the use of a induction motor model. The rod string were modeled using concentrated parameters, allowing the use of ordinary differential equations systems to simulate it s behavior

A tutela constitucional da exploração de petróleo em águas internacionais em face do princípio do desenvolvimento sustentável: a possibilidade de responsabilização civil do dano futuro

The demands brought by a society doomed to the constant production of global risks, which whose effects are not immediately noticed effects are not perceived immediately, claim from the Law a new Theory about the Risk, that would offer a broad environmental protection, at the same time it would still be compatible with the idea of economic efficiency, required by the Modern Industry. The expansion of the methods and technologies regarding the exploitation and production of oil causes the constant expansion of the exploitable boundaries, especially in ultra-deep waters with the Pre-salt layer, in Brazil, or the still incipient research about the polymetallic nodules and other mineral sources in international waters, like the Atlântico Sudoeste, by the Programme on Ocean Science in Relation do Non Living Resources (OSNLR), a global study performed in partnership with the Intergovernmental Oceanographic Commission, from UNESCO (IOC UNESCO) and also with the Division of Ocean Affairs and Law of the Sea (UNDOALOS). Thus, we aim to analyze the correlation, and possible collisions between the right to a balanced environment and the free exercise of economic activity and the occurrence of environmental damages from the perspective of the exploitation activities of oil and other natural resources in international waters, specifically in the Area, from the constitutional principle of sustainable development and its legitimacy by the environmental international protection. Therefore, this study also aims to evaluate the legal framework for exploration and production of oil in international waters, particularly in the Area, and appraise how the constitutional instruments and mechanisms for environmental protection can impact on the international environmental protection system in order to ensure the present and future generations an ecologically balanced environment, laid down in Article 225 of the Brazilian Constitution, even with so many risks posed by the activities of exploitation and production of oil in international waters. In the meantime, we intend to also intend to investigate the possibility of future liability for environmental damage in order to ensure that constitutional principle and, consequently, and try to define the concept of environmental damage and its implications on the constitutional principle of environmental protection. Given all that was in summary, this work aims to contribute to the evolution of the new Theory of Environmental Risk, turning the law into something more than a punitive or corrective element in this society, but into a legal risk management, that may be triggered even before the consolidation of the damage

Aspectos biológicos e dano de Diatraea saccharalis (fabr., 1794) (Lepidoptera: Pyralidae) em sorgo cultivado sob diferentes doses de nitrogênio e potássio

O presente trabalho teve como objetivo avaliar a influência da adubação da cultura do sorgo Sorghum bicolor (L.) Moench, na biologia da broca da cana-de-açúcar Diatraea saccharalis (Fabr., 1794) (Lepidoptera: Pyralidae). Para isso foi utilizado sorgo da cultivar Rubi-Asgrow, plantado em vasos utilizando-se diferentes doses de fertilizantes e mantidos em casa-de-vegetação. Os tratamentos utilizados (doses de NK) foram: N1 = 0-200 ppm; N2 = 50-200 ppm; N3 = 100-200 ppm; N4 = 200-200 ppm; N5 = 400-200 ppm; K1 = 200-0 ppm; K2 = 200-50 ppm; K3 = 200-100 ppm; K4 = 200-200 ppm; e K5 = 200-400 ppm. de modo geral, pode-se concluir que doses de 50 a 200 ppm de N promoveram o desenvolvimento normal das larvas de D. saccharalis, sendo que as menores porcentagens de dano foram verificadas nas menores doses; para o potássio, quanto maior a dose, menor foi o dano causado pelas lagartas, apesar de favorecer o desenvolvimento da mesma.

Dinâmica populacional e evolução de dano de Triozoida limbata(Hemiptera: Psillydae) em goiabeira, em Jaboticabal, SP

The present work aimed at learning the population dynamic of Triozoida limbata (Enderlein, 1918) (Hemiptera: Psyllidae) in a guava orchard submitted to the minimum use of insecticide in Jaboticabal - SP. For the study of population fluctuation and the evolution of damage from the psillid we analyzed 20 plants of the orchard biweekly, during the period from March 2005 to June 2006. For each plant we evaluated 10 leaves containing the symptom of the attack from the psillid. The evaluated parameters were the number of nymphs and the percentage of damage caused in the leaves, in accordance with a scale of notes. These parameters were analyzed in histograms and correlated to the meteorological factors. The population density of the psillid increased considerably with the approach of the spring and presented a positive correlation with the temperature. The level of damage of the psillid accompanied the population density of the pest. According to the data found in this work we may conclude that the increase of the temperature causes an increase in the population density of T. limbata and the largest population densities from psillid occur in the months of September to November and the smallest densities occur between the months of May and July.

A influência da estimulação transcrâniana por corrente contínua nos parâmetros de dano muscular induzido pelo exercício

A estimulação transcraniana por corrente contínua (ETCC) é uma técnica não invasiva que apresenta características anti-fadigante e analgésica. Com o objetivo de testar seus efeitos sobre a diminuição da força e do aparecimento da dor muscular de início tardio (DMIT), apresentados após um evento de dano muscular induzido pelo exercício (DMIE), foi utilizado um estudo clínico de caráter experimental, controlado, randomizado e duplo-cego. A amostra foi composta por 24 jovens do sexo masculino, aparentemente saudáveis (19,7±1,8 anos; 23,6±3,65 IMC), os quais foram alocada, de forma aleatória e estratificada, nos seguintes grupos: G1: grupo controle; G2: grupo de estimulação após o dano e G3: grupo com estimulação antes e após o dano muscular. Os dados foram submetidos à estatística descritiva e análise de variância ANOVA, adotando-se um nível de significância de 5%. O aumento nos níveis séricos de CK (56.18%) e LDH (24,15%) comprovou a ocorrência do DMIE. Em contrapartida, após a análise de variância para comparação dos tratamentos aplicados, pode-se observar que não houve diferenças significativas nos níveis de CK (p= 0,3514) e força muscular (p= 0,9702). A DMIT transcorreu como esperado, mas sem diferença significativa entre os grupos (p= 0,4861). Estes dados demonstraram que a ETCC não foi capaz de modular a DMIT e a diminuição da força muscular após o DMIE em jovens aparentemente saudáveis

Manejo mecânico e cultura de cobertura na entrelinha da seringueira (PB 235 e RRIM 701) e os atributos físicos de um latossolo vermelho no Planalto Paulista

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo do comportamento mecânico de areias artificialmente cimentadas

Soil improved with the addition of cement have been utilized as an alternative to the construction of various types of geotechnical works, almost always present economic and environmental advantages. This paper presents a study on the usage of cement in the improvement of mechanical properties of sandy soils, characteristic of the region of Natal, collected from its dunes. This research was made in order to analyze the influence of cement content, voids, and also including water immersion and confining pressure. Samples molded from cement-soil mixtures were tested for unconfined compression tests and triaxial tests. The samples had the percentage of cement mixed in 2.5%, 5% and 10% by weight. The cement agent used was the Portland Cement of High Early strength(CPV-ARI), which promoted agility to the experimental procedure for presenting a rapid gain in strenght. The void ratio used ranged from 0.7 (more compact), 0,9 and 1,1(softer). The soil under study can be considered as pure sand. In general, it can be stated that the larger the amount of cement added to the sand studied is, the greater ultimate strength will be. Likewise, as more compact the soil is, the less void ratio and more resistant it will be present. The confining pressure tends to increase the resistance of the specimens. The cementing adopted grades showed that the use of different criteria for failure did not significantly alter the stress-strain parameters for the sand studied. The angle of friction values were found within the typical range of medium and compact sands. Cementing acted in the sand providing an intercepted cohesion which increased enhancing the potential cementation. In triaxial compression tests, the sand with void ratio is equal to 0.7 and showed the expected behavior for a compact sand while the stress-strain behavior of the same sand with the void ratio of 0.9 tended to be expected for the soft sand as well

Análise do Comportamento Mecânico de Concretos Produzidos com Incorporação de Cinza do Bagaço da Cana-de-Açúcar de Variedades SP911049, RB92579 E SP816949

Concrete is the second most consumed product in the world and the incorporation of the Sugar Bagasse Ash (SBA) into this material can provide solutions for the utilization of by-products from other industries, thus reducing the environmental impact. The general aim of this dissertation focuses on analyzing the mechanical behavior of concrete with addition of SBA from three different species of sugar cane, through tests of consistency, compressive strength, porosity, absorption, voids and Scanning Electron Microscopy (SEM). Were prepared 13 specimens for each specific pattern and level of incorporation of SBA (10%, 20% and 30%) of the three varieties collected, totaling 130 samples of concrete. The trait was employed 1:2:3 (cement: sand: aggregates) in relation to the cement mass with a water / cement ratio of 0.532 and 1% additive Tec 400 Mult also based on the weight of cement. According to the results obtained in this study, it was concluded that the variety of cane sugar, used in the production of the CBC, influenced the mechanical behavior of the resulting concrete. All concrete with addition of SBA, reported a reduction of at least 10% in the properties related to permeability and an increase in the compressive strength of at least 16% compared to standard concrete at 28 days

Ajuste automático e otimização do tempo de espera (Idle time) em bombeio mecânico de petróleo

The present work presents an algorithm proposal, which aims for controlling and improving idle time to be applied in oil production wells equipped with beam pump. The algorithm was totally designed based on existing papers and data acquired from two Potiguar Basin pilot wells. Oil engineering concepts such as submergence, pump off, Basic Sediments and Water (BSW), Inflow Performance Relationship (IPR), reservo ir pressure, inflow pressure, among others, were included into the algorithm through a mathematical treatment developed from a typical well and then extended to the general cases. The optimization will increase the well production potential maximum utilization having the smallest number of pumping unit cycles directly reflecting on operational cost and electricity consumption reduction

Detecção e classificação de modos de operação do bombeio mecânico via cartas dinamométricas

The precision and the fast identification of abnormalities of bottom hole are essential to prevent damage and increase production in the oil industry. This work presents a study about a new automatic approach to the detection and the classification of operation mode in the Sucker-rod Pumping through dynamometric cards of bottom hole. The main idea is the recognition of the well production status through the image processing of the bottom s hole dynamometric card (Boundary Descriptors) and statistics and similarity mathematics tools, like Fourier Descriptor, Principal Components Analysis (PCA) and Euclidean Distance. In order to validate the proposal, the Sucker-Rod Pumping system real data are used

Avaliação operacional do controle mecânico de plantas aquáticas imersas no reservatório de Jupiá

O presente trabalho foi realizado com o objetivo de estudar a coleta e o descarte de plantas aquáticas em diferentes locais e infestações do sistema Tietê/Paraná, no reservatório de Jupiá. A operação foi realizada com auxílio de instrumentação instalada em uma colhedora de plantas aquáticas, com sistema de GPS dotado de sinal de correção diferencial. Os tempos gastos para carregar e descarregar a colhedora foram determinados por cronometragem, e a distância do ponto final de coleta ao ponto de descarte e o tempo de deslocamento, por cronometragem e uso de GPS convencional. em algumas coletas foram demarcados polígonos, instruindo-se o operador a trabalhar exclusivamente na área correspondente. A interpretação dos resultados permitiu determinar a participação do tempo de coleta em relação ao tempo total de operação, indicando um valor significativo do ponto de vista operacional (>70%). Considerando o descarte em áreas infestadas com taboa, o deslocamento total médio foi de apenas 383 m, com gasto médio de 200,96 s. Os valores de capacidade operacional da colhedora oscilaram entre 0,23 e 1,60 ha h-1, indicando valor médio de 4,48 ha dia-1. A maior limitação à capacidade operacional associou-se à velocidade média de deslocamento, com maior agravante em áreas com altas infestações ou profundas. Considerando-se o deslocamento da colhedora, houve grande dificuldade de orientação em condições normais de operação, inviabilizando a manutenção de espaçamentos uniformes entre as faixas de coleta e sobrepondo as passagens. Conclui-se que a avaliação operacional indicou a impossibilidade de operar a colhedora sem o auxílio de um sistema de navegação que permita orientar a sua movimentação nas áreas de controle.