Leaf gas exchange characteristics of three neotropical mangrove species in response to varying hydroperiod

We determined how different hydroperiods affected leaf gas exchange characteristics of greenhouse-grown seedlings (2002) and saplings (2003) of the mangrove species Avicennia germinans (L.) Stearn., Laguncularia racemosa (L.) Gaertn. f., and Rhizophora mangle L. Hydroperiod treatments included no flooding (unflooded), intermittent flooding (intermittent), and permanent flooding (flooded). Plants in the intermittent treatment were measured under both flooded and drained states and compared separately. In the greenhouse study, plants of all species maintained different leaf areas in the contrasting hydroperiods during both years. Assimilation-light response curves indicated that the different hydroperiods had little effect on leaf gas exchange characteristics in either seedlings or saplings. However, short-term intermittent flooding for between 6 and 22 days caused a 20% reduction in maximum leaf-level carbon assimilation rate, a 51% lower light requirement to attain 50% of maximum assimilation, and a 38% higher demand from dark respiration. Although interspecific differences were evident for nearly all measured parameters in both years, there was little consistency in ranking of the interspecific responses. Species by hydroperiod interactions were significant only for sapling leaf area. In a field study, R. mangle saplings along the Shark River in the Everglades National Park either demonstrated no significant effect or slight enhancement of carbon assimilation and water-use efficiency while flooded. We obtained little evidence that contrasting hydroperiods affect leaf gas exchange characteristics of mangrove seedlings or saplings over long time intervals; however, intermittent flooding may cause short-term depressions in leaf gas exchange. The resilience of mangrove systems to flooding, as demonstrated in the permanently flooded treatments, will likely promote photosynthetic and morphological adjustment to slight hydroperiod shifts in many settings.

A novel signal processing method for intraoperative neurophysiological monitoring in spinal surgeries

Intraoperative neurophysiologic monitoring is an integral part of spinal surgeries and involves the recording of somatosensory evoked potentials (SSEP). However, clinical application of IONM still requires anywhere between 200 to 2000 trials to obtain an SSEP signal, which is excessive and introduces a significant delay during surgery to detect a possible neurological damage. The aim of this study is to develop a means to obtain the SSEP using a much less, twelve number of recordings. The preliminary step involved was to distinguish the SSEP with the ongoing brain activity. We first establish that the brain activity is indeed quasi-stationary whereas an SSEP is expected to be identical every time a trial is recorded. An algorithm was developed using Chebychev time windowing for preconditioning of SSEP trials to retain the morphological characteristics of somatosensory evoked potentials (SSEP). This preconditioning was followed by the application of a principal component analysis (PCA)-based algorithm utilizing quasi-stationarity of EEG on 12 preconditioned trials. A unique Walsh transform operation was then used to identify the position of the SSEP event. An alarm is raised when there is a 10% time in latency deviation and/or 50% peak-to-peak amplitude deviation, as per the clinical requirements. The algorithm shows consistency in the results in monitoring SSEP in up to 6-hour surgical procedures even under this significantly reduced number of trials. In this study, the analysis was performed on the data recorded in 29 patients undergoing surgery during which the posterior tibial nerve was stimulated and SSEP response was recorded from scalp. This method is shown empirically to be more clinically viable than present day approaches. In all 29 cases, the algorithm takes 4sec to extract an SSEP signal, as compared to conventional methods, which take several minutes. The monitoring process using the algorithm was successful and proved conclusive under the clinical constraints throughout the different surgical procedures with an accuracy of 91.5%. Higher accuracy and faster execution time, observed in the present study, in determining the SSEP signals provide a much improved and effective neurophysiological monitoring process.

Market reforms and privatisation in the English National Health Service

The article examines developments in the marketisation and privatisation of the English National Health Service, primarily since 1997. It explores the use of competition and contracting out in ancillary services and the levering into public services of private finance for capital developments through the Private Finance Initiative. A substantial part of the article examines the repeated restructuring of the health service as a market in clinical services, initially as an internal market but subsequently as a market increasing opened up to private sector involvement. Some of the implications of market processes for NHS staff and for increased privatisation are discussed. The article examines one episode of popular resistance to these developments, namely the movement of opposition to the 2011 health and social care legislative proposals. The article concludes with a discussion of the implications of these system reforms for the founding principles of the NHS and the sustainability of the service.

Plasticity varies with boldness in a weakly-electric fish

The expression of animal personality is indicated by patterns of consistency in  individual behaviour. Often, the differences exhibited between individuals are consistent across situations. However, between some situations, this can be biased by variable levels of individual plasticity. The interaction between individual plasticity and animal personality can be illustrated by examining situation-sensitive personality traits such as boldness (i.e. risk-taking and exploration tendency). For the weakly electric fish Gnathonemus petersii, light condition is a major factor influencing behaviour. Adapted to navigate in low-light conditions, this species chooses to be more active in dark environments where risk from visual predators is lower. However, G. petersii also exhibit individual differences in their degree of behavioural change from light to dark. The present study, therefore, aims to  examine if an increase of motivation to explore in the safety of the dark, not only affects mean levels of boldness, but also the variation between individuals, as a result of differences  in individual plasticity.  Results: Boldness was consistent between a novel-object and a novel-environment situation in bright light. However, no consistency in boldness was noted between a bright (risky) and a  dark (safe) novel environment. Furthermore, there was a negative association between boldness and the degree of change across novel environments, with shier individuals  exhibiting greater behavioural plasticity.  Conclusions: This study highlights that individual plasticity can vary with personality. In  addition, the effect of light suggests that variation in boldness is situation specific. Finally,  there appears to be a trade-off between personality and individual plasticity with shy but  plastic individuals minimizing costs when perceiving risk and bold but stable individuals  consistently maximizing rewards, which can be maladaptive.

Actual status of preoperative diagnosis of thyroid cancer in Albania

Introduction. Thyroid cancer is the most common endocrine malignancy and accounts for almost 1% of human cancer. It is well known that the majority of cases occur in women in the middle decades of life. Thyroid cancer is a relatively rare disease; on the other hand clinically apparent thyroid nodules are present in 4-7% of the adult population. Most thyroid nodules are not malignant, with reported malignancy rates from 3-12%. It is important for the surgeon to know beforehand the diagnosis of malignancy, in order to perform a more radical operation on the thyroid gland. Patients and Methods. In our study we have analyzed the preoperative clinical data of 84 patients operated in the First Clinic of General Surgery, UHC “Mother Theresa” in Tirana; all with a positive histopathologic diagnosis of thyroid cancer. The data comprised age, sex, age distribution, blood group, time-lapse from the first endocrinologic visit, clinical examination, signs and symptoms, imaging, functional tests, preoperative FNA, admission diagnosis, associated diseases and preoperative treatment. Results. From the study emerged that only 9,3% of these patients were diagnosed preoperatively as thyroid cancer. Another related problem is the low percentage of preoperative FNA – only 22%. Among the signs and symptoms related to thyroid cancer we found that 40 and 33% of these patient presented dyspnea and dysphagia, respectively. The physical examination revealed apparent nodular growth of the thyroid gland in 81% and nodular hard consistency in 79% of cases. The proper endocrinologist consultation lacked in 23% of cases. Conclusion. In our opinion, close collaboration between endocrinologists and surgeons in a multidisciplinary frame is the key to correct preoperative thyroid cancer diagnosis and optimal treatment.

Comparison of different methods to detect genetic barriers in a small mammal population

Habitat fragmentation and the consequently the loss of connectivity between populations can reduce the individuals interchange and gene flow, increasing the chances of inbreeding, and the increase the risk of local extinction. Landscape genetics is providing more and better tools to identify genetic barriers.. To our knowledge, no comparison of methods in terms of consistency has been made with observed data and species with low dispersal ability. The aim of this study is to examine the consistency of the results of five methods to detect barriers to gene flow in a Mediterranean pine vole population Microtus duodecimcostatus: F-statistics estimations, Non-Bayesian clustering, Bayesian clustering, Boundary detection and Simple/Partial Mantel tests. All methods were consistent in detecting the stream as a non-genetic barrier. However, no consistency in results among the methods were found regarding the role of the highway as a genetic barrier. Fst, Bayesian clustering assignment test and Partial Mantel test identifyed the highway as a filter to individual interchange. The Mantel tests were the most sensitive method. Boundary detection method (Monmonier’s Algorithm) and Non-Bayesian approaches did not detect any genetic differentiation of the pine vole due to the highway. Based on our findings we recommend that the genetic barrier detection in low dispersal ability populations should be analyzed with multiple methods such as Mantel tests, Bayesian clustering approaches because they show more sensibility in those scenarios and with boundary detection methods by having the aim of detect drastic changes in a variable of interest between the closest individuals. Although simulation studies highlight the weaknesses and the strengths of each method and the factors that promote some results, tests with real data are needed to increase the effectiveness of genetic barrier detection.

Orthographic regularization in Early Modern English: Grapheme distribution and vowel length indication

The present study is an attempt at assessing the level of consistency in the orthographic systems of selected sixteenth and seventeenth-century printers and at tracing the influence that normative writings could have potentially exerted on them. The approach taken here draws upon the philological tradition of examining and comparing several texts written in the same language, but produced at different times. The study discusses the orthography of the editions of The Schoole of Vertue, a manual of good conduct for children, published between 1557 and 1687. The orthographic variables taken into account fall into two criteria: the distribution and functional load of the selected graphemes and the indication of vowel length.

Residential schools in a first-year undergraduate engineering programme

BACKGROUND OR CONTEXT: For over 20 years, Deakin University has delivered an accredited undergraduate engineering course by means of distance education. Prior to 2004, off-campus students were not required to attend classes in person on campus. The course was designed so that the off campus students were able to undertake all study and assessment tasks remotely from the university campus. Offering accredited domestic undergraduate engineering courses via distance education has been seen as an important strategy for helping to provide graduate domestically educated engineers to meet Australia’s current and future needs. From 2000 the Australian accreditation management system for professional engineers, as managed by Engineers Australia, has increased its scrutiny of accredited domestic undergraduate engineering courses that were provided in distance-education mode. This led to a series of policies and recommendations for Australian universities that offer accredited engineering courses in distance-education mode: one of the recommendations was that off campus
enrolled engineering students should periodically attend some campus-based activities throughout the course. During the 2004 accreditation review of engineering courses at Deakin University, the
accreditation panel requested that mandatory campus-based activities be incorporated into the accredited undergraduate engineering course. Specifically the request was that Deakin mandate that all off-campus students enrolled in an accredited undergraduate engineering course provided by university attend in person a residential school at least once during every year of equivalent full-time study load. The accreditation panel suggested a program model for the residential school component of the course as developed by the University of Southern Queensland.
PURPOSE OR GOAL: This paper describes the development of the mandatory residential school component of accredited distance education undergraduate engineering courses at Deakin University with
a particular focus on how the residential school program is implemented at level 1 (first-year full-time equivalent level) of the courses.
APPROACH: To be compliant with accreditation requirements, since 2005 Deakin has conducted residential schools for off-campus students at its Geelong Waurn Ponds Campus. Initially the schools were conducted annually over two-weeks during the first semester, and have transitioned to the current mode where the residential school is conducted as a one week programme in each of the trimesters. During these schools, activities are organised around the respective engineering-course units undertaken by students during the trimester.
DISCUSSION: The minimum requirements for the on-campus components of distance-education-mode accredited engineering courses were developed by Engineers Australia in consultation with members of the Washington Accord (International Education Alliance) and at the time of development, generated considerable debate (Palmer, 2005, 2008). The intended purpose of residential schools was for off-campus enrolled students to have reasonable exposure to a typical “on-the-campus” student experience periodically throughout the course. Elements considered suitable and worthwhile for inclusion in residential school programs included:
• in person engagement with their academic lecturers,
• presentations and interaction with guest speakers from industry,
• industry-based site visits,
• engagement in sole and group-based learning and assessment activities on campus, and
• social interaction with other students.
RECOMMENDATIONS/IMPLICATIONS/CONCLUSION: We have found that advantages to the students who attends a residential school include completing real practical work without the need to assemble their own materials at home, and social engagement with staff and students. Off-campus students leave the residential school with a sense of belonging to a “community”, “one of many doing the same and not the only one”. They have the opportunity to share their often significant professional experience with the generally younger and less experienced on-campus student colleagues. Through this interaction between on-campus and off-campus students, the on-campus students benefit as much as the off-campus students. The disadvantages to the off-campus students is the requirement to travel to Geelong for an extended time, which costs the students both money and time away from work and family. From our experience, we recommend to other institutions starting residential schools of their own that they exploit the mandatory on-campus-presence requirement to enhance learning outcomes, well publicised timetables be available to students before trimester begins (certainly before census date), a standardised academic week during trimester be set for all residential schools, encourage student feedback on the program, and apply a practice of uniformity and consistency in how the programme is managed, especially mandated student attendance. Our residential schools for off-campus-mode students have been running for over 10 years. We have found that the educational and social advantages to the student outweigh the disadvantages.

Assessing sexual orientation-related obsessions and compulsions in Italian heterosexual individuals: Development and validation of the Sexual Orientation Obsessive-Compulsive Scale (SO-OCS).

Sexual Orientation-Obsessive-Compulsive Disorder (SO-OCD) is characterized by intrusive thoughts, images, and urges related to one's sexual orientation, and by consequent avoidance, reassurance seeking, and overt and covert compulsions. Currently there is no short self-report measure that assesses SO-OCD symptoms. The current article describes two studies that develop and evaluate the first version of the Sexual Orientation Obsessive-Compulsive Scale (SO-OCS), a 14-item Italian self-report measure targeted towards heterosexual individuals. In Study 1, the SO-OCS was developed and refined through item analysis and exploratory factor analysis from an initial pool of 33 items administered to 732 Italian nonclinical participants. The SO-OCS showed a unidimensional structure and an acceptable internal consistency. In Study 2, the factor structure, internal consistency, temporal stability, construct and criterion validity, and diagnostic sensitivity of the SO-OCS were investigated in three samples of Italian participants (294 from the general population, 52 OCD patients who reported sexual orientation-related symptoms or concerns as a primary complaint, and 51 OCD patients who did not report these symptoms as primary complaint). The SO-OCS was again found to have a unidimensional structure and good internal consistency, as well as to exhibit strong construct validity. Specifically, the SO-OCS showed an excellent criterion validity and diagnostic sensitivity, as it successfully discriminated between those with SO-OCD and all other groups of participants. Finally, evidence of temporal stability of the SO-OCS in a nonclinical subsample was found. The SO-OCS holds promise as a measure of SO-OCD symptoms in heterosexual individuals.

Social Tagging and the Next Steps for Indexing: Fordist Relexivity and Intertextuality

Social tagging, as a particular type of indexing, has thrown into question the nature of indexing. Is it a democratic process? Can we all benefit from user-created tags? What about the value added by professionals? Employing an evolving framework analysis, this paper addresses the question: what is next for indexing? Comparing social tagging and subject cataloguing; this paper identifies the points of similarity and difference that obtain between these two kinds of information organization frameworks. The subsequent comparative analysis of the parts of these frameworks points to the nature of indexing as an authored, personal, situational, and referential act, where differences in discursive placement divide these two species. Furthermore, this act is contingent on implicit and explicit understanding of purpose and tools available. This analysis allows us to outline desiderata for the next steps in indexing.

Collocative Integrity and Our Many Varied Subjects: What the Metric of Alignment between Classification Scheme and Indexer Tells Us About Langridge’s Theory of Indexing

As the universe of knowledge and subjects change over time, indexing languages like classification schemes, accommodate that change by restructuring. Restructuring indexing languages affects indexer and cataloguer work. Subjects may split or lump together. They may disappear only to reappear later. And new subjects may emerge that were assumed to be already present, but not clearly articulated (Miksa, 1998). In this context we have the complex relationship between the indexing language, the text being described, and the already described collection (Tennis, 2007). It is possible to imagine indexers placing a document into an outdated class, because it is the one they have already used for their collection. However, doing this erases the semantics in the present indexing language. Given this range of choice in the context of indexing language change, the question arises, what does this look like in practice? How often does this occur? Further, what does this phenomenon tell us about subjects in indexing languages? Does the practice we observe in the reaction to indexing language change provide us evidence of conceptual models of subjects and subject creation? If it is incomplete, but gets us close, what evidence do we still require?

Building Information Modelling for FM at Sydney Opera House

“SOH see significant benefit in digitising its drawings and operation and maintenance manuals. Since SOH do not currently have digital models of the Opera House structure or other components, there is an opportunity for this national case study to promote the application of Digital Facility Modelling using standardized Building Information Models (BIM)”. The digital modelling element of this project examined the potential of building information models for Facility Management focusing on the following areas: • The re-usability of building information for FM purposes • BIM as an Integrated information model for facility management • Extendibility of the BIM to cope with business specific requirements • Commercial facility management software using standardised building information models • The ability to add (organisation specific) intelligence to the model • A roadmap for SOH to adopt BIM for FM The project has established that BIM – building information modelling - is an appropriate and potentially beneficial technology for the storage of integrated building, maintenance and management data for SOH. Based on the attributes of a BIM, several advantages can be envisioned: consistency in the data, intelligence in the model, multiple representations, source of information for intelligent programs and intelligent queries. The IFC – open building exchange standard – specification provides comprehensive support for asset and facility management functions, and offers new management, collaboration and procurement relationships based on sharing of intelligent building data. The major advantages of using an open standard are: information can be read and manipulated by any compliant software, reduced user “lock in” to proprietary solutions, third party software can be the “best of breed” to suit the process and scope at hand, standardised BIM solutions consider the wider implications of information exchange outside the scope of any particular vendor, information can be archived as ASCII files for archival purposes, and data quality can be enhanced as the now single source of users’ information has improved accuracy, correctness, currency, completeness and relevance. SOH current building standards have been successfully drafted for a BIM environment and are confidently expected to be fully developed when BIM is adopted operationally by SOH. There have been remarkably few technical difficulties in converting the House’s existing conventions and standards to the new model based environment. This demonstrates that the IFC model represents world practice for building data representation and management (see Sydney Opera House – FM Exemplar Project Report Number 2005-001-C-3, Open Specification for BIM: Sydney Opera House Case Study). Availability of FM applications based on BIM is in its infancy but focussed systems are already in operation internationally and show excellent prospects for implementation systems at SOH. In addition to the generic benefits of standardised BIM described above, the following FM specific advantages can be expected from this new integrated facilities management environment: faster and more effective processes, controlled whole life costs and environmental data, better customer service, common operational picture for current and strategic planning, visual decision-making and a total ownership cost model. Tests with partial BIM data – provided by several of SOH’s current consultants – show that the creation of a SOH complete model is realistic, but subject to resolution of compliance and detailed functional support by participating software applications. The showcase has demonstrated successfully that IFC based exchange is possible with several common BIM based applications through the creation of a new partial model of the building. Data exchanged has been geometrically accurate (the SOH building structure represents some of the most complex building elements) and supports rich information describing the types of objects, with their properties and relationships.

Performance Benchmarking of Australian Business Regulation : Submission to the Productivity Commission

The need to “reduce red tape” and regulatory inconsistencies is a desirable outcome (OECD 1997) for developed countries. The costs normally associated with regulatory regimes are compliance costs and direct charges. Geiger and Hoffman (1998) have noted that the extent of regulation in an industry tends to be negatively associated with firm performance. Typically, approaches to estimation of the cost of regulations examine direct costs, such as fees and charges, together with indirect costs, such as compliance costs. However, in a fragmented system, such as Australia, costs can also be incurred due to procedural delays, either by government, or by industry having to adapt documentation for different spheres of government; lack of predictable outcomes, with variations occurring between spheres of government and sometimes within the same government agency; and lost business opportunities, with delays and red tape preventing realisation of business opportunities (OECD 1997). In this submission these costs are termed adaptation costs. The adaptation costs of complying with variations in regulations between the states has been estimated by the Building Product Innovation Council (2003) as being up to $600 million per annum for building product manufacturers alone. Productivity gains from increased harmonisation of the regulatory system have been estimated in the hundreds of millions of dollars (ABCB 2003). This argument is supported by international research which found that increasing the harmonisation of legislation in a federal system of government reduces what we have termed adaptation costs (OECD 2001). Research reports into the construction industry in Australia have likewise argued that improved consistency in the regulatory environment could lead to improvements in innovation (PriceWaterhouseCoopers 2002), and that research into this area should be given high priority (Hampson & Brandon 2004). The opinion of industry in Australia has consistently held that the current regulatory environment inhibits innovation (Manley 2004). As a first step in advancing improvements to the current situation, a summary of the current costs experienced by industry needs to be articulated. This executive summary seeks to outline these costs in the hope that the Productivity Commission would be able to identify the best tools to quantify the actual costs to industry.

Building information modelling project decision support framework

Building Information Modelling (BIM) is an information technology [IT] enabled approach to managing design data in the AEC/FM (Architecture, Engineering and Construction/ Facilities Management) industry. BIM enables improved interdisciplinary collaboration across distributed teams, intelligent documentation and information retrieval, greater consistency in building data, better conflict detection and enhanced facilities management. Despite the apparent benefits the adoption of BIM in practice has been slow. Workshops with industry focus groups were conducted to identify the industry needs, concerns and expectations from participants who had implemented BIM or were BIM “ready”. Factors inhibiting BIM adoption include lack of training, low business incentives, perception of lack of rewards, technological concerns, industry fragmentation related to uneven ICT adoption practices, contractual matters and resistance to changing current work practice. Successful BIM usage depends on collective adoption of BIM across the different disciplines and support by the client. The relationship of current work practices to future BIM scenarios was identified as an important strategy as the participants believed that BIM cannot be efficiently used with traditional practices and methods. The key to successful implementation is to explore the extent to which current work practices must change. Currently there is a perception that all work practices and processes must adopt and change for effective usage of BIM. It is acknowledged that new roles and responsibilities are emerging and that different parties will lead BIM on different projects. A contingency based approach to the problem of implementation was taken which relies upon integration of BIM project champion, procurement strategy, team capability analysis, commercial software availability/applicability and phase decision making and event analysis. Organizations need to understand: (a) their own work processes and requirements; (b) the range of BIM applications available in the market and their capabilities (c) the potential benefits of different BIM applications and their roles in different phases of the project lifecycle, and (d) collective supply chain adoption capabilities. A framework is proposed to support organizations selection of BIM usage strategies that meet their project requirements. Case studies are being conducted to develop the framework. The results of the preliminary design management case study is presented for contractor led BIM specific to the design and construct procurement strategy.

Building information modelling : an issue of adoption and change management

Building Information Modelling (BIM) is an IT enabled technology that allows storage, management, sharing, access, update and use of all the data relevant to a project through out the project life-cycle in the form of a data repository. BIM enables improved inter-disciplinary collaboration across distributed teams, intelligent documentation and information retrieval, greater consistency in building data, better conflict detection and enhanced facilities management. While the technology itself may not be new, and similar approaches have been in use in some other sectors like Aircraft and Automobile industry for well over a decade now, the AEC/FM (Architecture, Engineering and Construction/ Facilities Management) industry is still to catch up with them in its ability to exploit the benefits of the IT revolution. Though the potential benefits of the technology in terms of knowledge sharing, project management, project co-ordination and collaboration are near to obvious, the adoption rate has been rather lethargic, inspite of some well directed efforts and availability of supporting commercial tools. Since the technology itself has been well tested over the years in some other domains the plausible causes must be rooted well beyond the explanation of the ‘Bell Curve of innovation adoption’. This paper discusses the preliminary findings of an ongoing research project funded by the Cooperative Research Centre for Construction Innovation (CRC-CI) which aims to identify these gaps and come up with specifications and guidelines to enable greater adoption of the BIM approach in practice. A detailed literature review is conducted that looks at some of the similar research reported in the recent years. A desktop audit of some of the existing commercial tools that support BIM application has been conducted to identify the technological issues and concerns, and a workshop was organized with industry partners and various players in the AEC industry for needs analysis, expectations and feedback on the possible deterrents and inhibitions surrounding the BIM adoption.