Profile in occupational counselling and placement and employment services: social policies axis

This paper presents the gestation of a new model of Occupational Counselling, centred in the joint action of State, Third Sector and Private Organizations. Different programmes are identified which involve the treatment of issues related to Labour, Employment and Education within the framework of objectives of social development, community participation and respect for diversity. The data of the investigation make it possible to establish connections between the tasks, professional profiles and professional training of the counsellors who participate in the different programmes.

Profile in occupational counselling and placement and employment services: social policies axis

This paper presents the gestation of a new model of Occupational Counselling, centred in the joint action of State, Third Sector and Private Organizations. Different programmes are identified which involve the treatment of issues related to Labour, Employment and Education within the framework of objectives of social development, community participation and respect for diversity. The data of the investigation make it possible to establish connections between the tasks, professional profiles and professional training of the counsellors who participate in the different programmes.

AMS 14C ages and isotopic compositions of samples from the Derugin Basin, Sea of Okhotsk

An area of massive barite precipitations was studied at a tectonic horst in 1500 m water depth in the Derugin Basin, Sea of Okhotsk. Seafloor observations and dredge samples showed irregular, block- to column-shaped barite build-ups up to 10 m high which were scattered over the seafloor along an observation track 3.5 km long. High methane concentrations in the water column show that methane expulsion and probably carbonate precipitation is a recently active process. Small fields of chemoautotrophic clams (Calyptogena sp., Acharax sp.) at the seafloor provide additional evidence for active fluid venting. The white to yellow barites show a very porous and often layered internal fabric, and are typically covered by dark-brown Mn-rich sediment; electron microprobe spectroscopy measurements of barite sub-samples show a Ba substitution of up to 10.5 mol% of Sr. Rare idiomorphic pyrite crystals (~1%) in the barite fabric imply the presence of H2S. This was confirmed by clusters of living chemoautotrophic tube worms (1 mm in diameter) found in pores and channels within the barite. Microscopic examination showed that micritic aragonite and Mg-calcite aggregates or crusts are common authigenic precipitations within the barite fabric. Equivalent micritic carbonates and barite carbonate cemented worm tubes were recovered from sediment cores taken in the vicinity of the barite build-up area. Negative d13C values of these carbonates (>-43.5 per mill PDB) indicate methane as major carbon source; d18O values between 4.04 and 5.88 per mill PDB correspond to formation temperatures, which are certainly below 5°C. One core also contained shells of Calyptogena sp. at different core depths with 14C-ages ranging from 20 680 to >49 080 yr. Pore water analyses revealed that fluids also contain high amounts of Ba; they also show decreasing SO4**2- concentrations and a parallel increase of H2S with depth. Additionally, S and O isotope data of barite sulfate (d34S: 21.0-38.6 per mill CDT; d18O: 9.0-17.6 per mill SMOW) strongly point to biological sulfate reduction processes. The isotope ranges of both S and O can be exclusively explained as the result of a mixture of residual sulfate after a biological sulfate reduction and isotopic fractionation with 'normal' seawater sulfate. While massive barite deposits are commonly assumed to be of hydrothermal origin, the assemblage of cheomautotrophic clams, methane-derived carbonates, and non-thermally equilibrated barite sulfate strongly implies that these barites have formed at ambient bottom water temperatures and form the features of a Giant Cold Seep setting that has been active for at least 49 000 yr.

(Table 3) Carbon and oxygen isotopic data of carbonates from Core SLR 37-1, HYC 25-1 and an aragonite crust from station DR 35-1

An area of massive barite precipitations was studied at a tectonic horst in 1500 m water depth in the Derugin Basin, Sea of Okhotsk. Seafloor observations and dredge samples showed irregular, block- to column-shaped barite build-ups up to 10 m high which were scattered over the seafloor along an observation track 3.5 km long. High methane concentrations in the water column show that methane expulsion and probably carbonate precipitation is a recently active process. Small fields of chemoautotrophic clams (Calyptogena sp., Acharax sp.) at the seafloor provide additional evidence for active fluid venting. The white to yellow barites show a very porous and often layered internal fabric, and are typically covered by dark-brown Mn-rich sediment; electron microprobe spectroscopy measurements of barite sub-samples show a Ba substitution of up to 10.5 mol% of Sr. Rare idiomorphic pyrite crystals (1%) in the barite fabric imply the presence of H2S. This was confirmed by clusters of living chemoautotrophic tube worms (1 mm in diameter) found in pores and channels within the barite. Microscopic examination showed that micritic aragonite and Mg-calcite aggregates or crusts are common authigenic precipitations within the barite fabric. Equivalent micritic carbonates and barite carbonate cemented worm tubes were recovered from sediment cores taken in the vicinity of the barite build-up area. Negative ?13C values of these carbonates (>?43.5? PDB) indicate methane as major carbon source; ?18O values between 4.04 and 5.88? PDB correspond to formation temperatures, which are certainly below 5°C. One core also contained shells of Calyptogena sp. at different core depths with 14C-ages ranging from 20 680 to >49 080 yr. Pore water analyses revealed that fluids also contain high amounts of Ba; they also show decreasing SO42- concentrations and a parallel increase of H2S with depth. Additionally, S and O isotope data of barite sulfate (?34S: 21.0-38.6? CDT; ?18O: 9.0-17.6? SMOW) strongly point to biological sulfate reduction processes. The isotope ranges of both S and O can be exclusively explained as the result of a mixture of residual sulfate after a biological sulfate reduction and isotopic fractionation with 'normal' seawater sulfate. While massive barite deposits are commonly assumed to be of hydrothermal origin, the assemblage of cheomautotrophic clams, methane-derived carbonates, and non-thermally equilibrated barite sulfate strongly implies that these barites have formed at ambient bottom water temperatures and form the features of a Giant Cold Seep setting that has been active for at least 49 000 yr.

Intermodal exchange stations in the city of Madrid

The City of Madrid is putting into operation Intermodal Exchange Stations (IESs) to make connections between urban and suburban transportation modes easier for users of public transportation. The purpose of this article is to evaluate the actual effects that the implementation of IESs in the City of Madrid has on the affected stakeholders: users, public transportation operators, infrastructure managers, the government, the abutters and other citizens. We develop a methodology intended to help assess the welfare gains and losses for each stakeholder. Then we apply this methodology to the case study of the Avenida de América IES in the city of Madrid. We found that it is indeed possible to arrive at win–win solutions for the funding of urban transportation infrastructure, as long as the cost-benefit ratio of the project is high enough. Commuters save travel time. Bus companies diminish their costs of operation. The abutters gain in quality of life. The private operator of the infrastructure makes a fair profit. And the government is able to promote these infrastructure facilities without spending more of its scarce budgetary resources.

Symmetry Issues in Directly Irradiated Targets

In direct drive Inertial Confinement Fusion (ICF), the typical laser beam to laser beam angle is around 30o. This fact makes the study of the irradiation symmetry agenuine 3D problem. In this paper we use the three dimensional version of the MULTI hydrocode to assess the symmetry of such ICF implosions. More specifically, we study a shock-ignition proposal for the Laser-M´egajoule facility (LMJ) in which two of the equatorial beam cones are used to implode and pre compress a spherical capsule (the “reference” capsule of HiPER project) made of 0.59 mg of pure Deuterium-Tritium mixture. The symmetry of this scheme is analysed and optimized to get a design inside the operating limits of LMJ. The studied configuration has been found essentially axial-symmetric, so that the use of 2D hydrocodes would be appropriate for this specific situation.

Reduced synchronization persistence in neural networks derived from atm-deficient mice

Many neurodegenerative diseases are characterized by malfunction of the DNA damage response. Therefore, it is important to understand the connection between system level neural network behavior and DNA. Neural networks drawn from genetically engineered animals, interfaced with micro-electrode arrays allowed us to unveil connections between networks’ system level activity properties and such genome instability. We discovered that Atm protein deficiency, which in humans leads to progressive motor impairment, leads to a reduced synchronization persistence compared to wild type synchronization, after chemically imposed DNA damage. Not only do these results suggest a role for DNA stability in neural network activity, they also establish an experimental paradigm for empirically determining the role a gene plays on the behavior of a neural network.

La arquitectura de Curro Inza : una aproximación crítica y proyectual

El arquitecto Curro Inza (1929-1976) pertenece al grupo que se ha denominado como organicismo madrileño y Escuela de Madrid, cuyas máximas realizaciones se produjeron durante los años sesenta del pasado siglo. Hasta ahora su obra y persona han generado opiniones bien extremas, pero apenas han sido investigadas, cuando en realidad su arquitectura trata asuntos que hoy se muestran de actual interés. El estudio que aquí se presenta tiene un doble objetivo. El primero es agrupar la información arquitectónica del autor y catalogar las obras de su archivo personal (inédito hasta ahora). Se ordena, clasifica y cataloga toda la documentación arquitectónica del archivo Inza, dejándose depositada en la Biblioteca de la ETSAM, quedando disponible y facilitando posteriores investigaciones sobre este arquitecto. Se procede asimismo a la digitalizaran de los proyectos principales garantizando su optima conservación para el futuro Una vez logrado el primer objetivo, el segundo consiste en realizar un análisis proyectual y critico de su obra, un punto de vista hasta ahora apenas abordado. Me propongo profundizar en una obra definida como compleja pero poco explicada, realizando una revisión crítica de sus escritos y de sus proyectos, y relacionando esta con otras arquitecturas (nacionales e internacionales) que sitúen al autor dentro del discurso contemporáneo. Para desentrañar las claves de su arquitectura se aborda el trabajo de Inza desde cinco miradas distintas y simultaneas. Desde cada una de estas miradas o categorías) se hace una aproximación crítica recorriendo los proyectos. Unas categorías que, a la postre, conforman el índice de este trabajo. Aunque la compilación y revisión del archivo posee algo de búsqueda arqueológica, el estudio no pretende tener un interés únicamente o intrínsecamente histórico. El trabajo tiene en realidad como fin estudiar la forma de proyectar de un arquitecto hasta ahora poco referencial y que entiendo, puede hoy establecer puentes con el presente y el futuro a través de su arquitectura. Intentar entender los mecanismos que arman esta arquitectura, sus orígenes, su evolución y la construcción de su lenguaje. En resumen, explicar y analizar la obra desde un punto de vista proyectual haciendo una lectura critica que desentrañe estrategias de las que hoy pudiéramos aprender y nos resultasen operativas.ABSTRACT: The architect Curro Inza (1929-1976) belongs to the group known as Madrilian organicism and the School of Madrid, whose most important works were built during the 1960 and 1970 decades. Curro Inza's work has received up until now very different, even extreme opinions, but his work has not been studied in depth, which is surprising if we consider that his architecture treats issues which are of great interest today. The present study has aimed at two objectives. The first has been to gather the information concerned with the author and his work, and to catalog all of the works of this personal archive (unpublished up until now). The work we have done here has consisted in compiling, digitalizing, classifying and cataloguing all of the documentation found in Curro Inza's personal archive; this archive has been deposited in the Biblioteca de la Escuela Superior de Artquitectura de Madrid (ETSAM) . We have also digitalized the main projects in order to assure the best storage conditions for the future. The second objective has consisted in analyzing Curro Inza's work from a project and critical point of view, an approach which has not yet been explored. Within this second objective, I have studied Inza's work, which is well defined and personal as well as complex, but which has received little attention and has not been explained. I have done a critical revision of both his projects and his writings, and have related these with other, both national and international, architectures, in order to place Inza's work within the contemporary architectural discourse. In order to decipher the essence of Inza's architecture, I have approached his work from five, simultaneous perspectives. I have described the projects critically from each of the five perspectives or categories; these five categories give shape to the organization of the dissertation. Even if the compilation and revision of Inza's archive is somehow an archaeological search, this study aims at having a larger scope than its strict, exclusive historical interest. In this study I have studied Inza's projects from a critical point of view and in relation to contemporary architecture and architectural thought, attempting to draw connections between Inza's work and modern, present architecture. We have also attempted to understand and describe Inza's language and conception of architectural discourse, as well as his origins, evolution and expression of his thought. In summary, I have analyzed and explained Curro Inza's work from a projectual point of view, drawing a critical reading of the strategies used by the author, and from which we could learn and work today.

La modernidad arquitectónica en México : una mirada a través del arte y los medios impresos

Esta tesis se basa en la hipótesis de que la modernidad arquitectónica en México no es, como se ha pretendido, una historia homogénea, centrada en un puñado de figuras clave, sino una multiplicidad de narrativas complejas en las cuales el arte y los medios impresos juegan un papel esencial. Por tanto, se propone una nueva mirada sobre la arquitectura del siglo XX en México a partir de la relación con la fotografía, el dibujo, las ideas y los medios. La tesis se plantea con el fin de vincular la arquitectura con los movimientos artísticos relevantes, los autores con las publicaciones, las formas con los manifiestos. Asímismo, uno de los principales intereses es explorar los conceptos de modernidad y de identidad, como parte de la construcción misma de la arquitectura de dicha época y del concepto de “lo mexicano”. A pesar del énfasis que se ha dado en la construcción de un canon, muchas veces ligado a la noción de monumentalidad, regionalismo, y mestizaje, este trabajo parte de una mirada puesta no en las formas sino en los procesos. A partir de las conexiones entre distintas capas de información, se buscan nuevas maneras de abordar el proyecto arquitectónico. El crítico de arquitectura brasileño Hugo Segawa ha descrito la investigación sobre la arquitectura latinoamericana como “una tarea más de índole arqueológica que historiográfica”, sin embargo, también ha calificado a México como “el más vigoroso centro de debates teóricos en Latinoamérica a lo largo del siglo XX.” Ese descompas entre la ruina y el vigor, entre la abundancia de producción y la precariedad de su conservación, ha definido no solo el estudio de la arquitectura sino las propias formas de creación. Por tanto, la tesis se plantea como una nueva plataforma desde la cual sea posible reformular la arquitectura, lejos de su condición amnésica, pensada en cambio, como un sistema basado en una misma voluntad por indagar y crear. Se busca, siguiendo al crítico británico Anthony Vidler, “relacionar” la historia con el proyecto. Con el fin de quitarle lo escurridizo a una historia incompleta y sobre todo de poder entender la manera en que las ideas se convierten en forma o en objeto, la tesis se estructura a partir de 22 líneas de tiempo organizadas en tres recorridos que se cruzan: arquitectura; arte y pensamiento. A partir de referencias como el Atlas Mnemosyne de Aby Wargurg o la serie Asterisms del artista Gabriel Orozco, se crean nuevos dispositivos para ver. De tal manera, se desdoblan los distintos temas para trazar relaciones entre la ciudad, los edificios, las utopías, las publicaciones y la publicidad. El trabajo se construye como un nuevo instrumento de exploración articulado por medio de capas, como un mapa genealógico evolutivo. El objetivo es abarcar aquella arquitectura construida no sólo en la ciudad sino también en el papel. Iniciando con el trabajo de la generación que llevó la arquitectura al siglo XX, el estudio se extiende a manera de epílogo hasta la primera década del siglo XXI, reuniendo obras que normalmente se han visto de manera aislada para entenderlas en su contexto más amplio. Como escenario de búsquedas, esta tesis intenta provocar el cruce de significados, creyendo imprescindible una nueva reflexión en torno a la disciplina y a los escenarios en los cuales se inscribe. La arquitectura de México –un país que en el siglo XX pasó de tener 13 millones de habitantes a 100 millonescorresponde esencialmente a una producción anónima, o bien, fabricada a partir de estereotipos. Pero entre la mancha de desarrollo informal y el hito reconocible está un trabajo tan amplio como inexplorado. Por tanto, se ofrece una serie de nuevas constelaciones que comprenden desde la Revolución de 1910 a los Juegos Olímpicos de 1968; del terremoto de la ciudad de México en 1985 a los concursos internacionales de las últimas décadas. This thesis’ hypothesis states that architectural modernity in Mexico is not, as sometimes pretended, a homogeneous history, focused on some key figures, but rather a multiple and complex narrative, in which art and print media have played an essential role. Therefore, it proposes a new perspective on 20th century architecture in Mexico analized through the relationship between architecture and photography, art, theory and media. Its aim is to link architecture and artistic movements, authors and publications, forms and manifestos. What is intended here is to explore the concepts of ‘modernity’ and ‘identity’ as part of the construction of architecture and the concept of ‘Mexicanity’. Despite the emphasis that has been given to the construction of an architectural canon —mostly related to the notions of monumentality, regionalism and mestizaje/métissage— this thesis’ approach is focused mainly in processes and not in forms. Through connections between diverse layers of information, new ways of dealing with the architectural project are explored. Brazilian architecture critic Hugo Segawa has described the research on Latin American architecture as «more a task of archaeology than of historiography». Nonetheless, he has also described Mexico as «the most vigorous center of theoretical debates in Latin America throughout the 20th century». This acute discrepancy between decay and vigor, between abundance of production and precarious state of conservation has determined not only the ways in which architecture is studied and understood but also the process of architectural creation. This work is therefore outlined as a new platform in order to reformulate the discipline as a system based on a common will to research and create, far from the existing amnesiac attitude. Following British critic Anthony Vidler, the interest relies in the attempt to ‘relate’ History to project. In order to reduce the elusiveness of an incomplete history and, specially, to understand how ideas become forms and objects, this thesis is composed of 22 timelines organized in three intersecting itineraries: Architecture, Art and Theory. Drawing inspiration from Aby Warburg’s Atlas Mnemosyne and Gabriel Orozco’s series Asterisms, new exploration devices are created. In such a way, diverse topics unfold to draw connections between built environment, utopian projects, publications, photography and publicity. This work is developed as a new tool for exploration, articulated by layers, like an evolutionary genealogy map. Its objective is to analyze not only the architecture build in cities, but produced on paper. Starting with the work of the generation that led Mexican architecture into the 20th century, this research extends until the first decade of the 21st century (the epilogue), gathering together works which have been usually seen in isolation, and therefore making possible its understanding in a broader context. As a scenario for exploration, this work tries to prompt the crossing of meanings, in the belief that new approaches on the discipline and its context are needed. Architecture in Mexico — a country whose population grew in the 20th century form 13 to 100 million— is related essentially with an anonymous production, or else made from stereotypes. However, between the sprawl of informal urban developments and landmark buildings there is an architectural production as extensive as it is unexamined. This essay introduces a series of new constellations, ranging from the Revolution in 1910 to the Olympic Games in 1968; from the earthquake in Mexico City in 1985 to the international competitions of the last decade. These myriad perspectives present buildings that were never built, forgotten writings, iconic images and unpublished material.

A framework for building distributed social network websites

Las redes son la esencia de comunidades y sociedades humanas; constituyen el entramado en el que nos relacionamos y determinan cómo lo hacemos, cómo se disemina la información o incluso cómo las cosas se llevan a cabo. Pero el protagonismo de las redes va más allá del que adquiere en las redes sociales. Se encuentran en el seno de múltiples estructuras que conocemos, desde las interaciones entre las proteínas dentro de una célula hasta la interconexión de los routers de internet. Las redes sociales están presentes en internet desde sus principios, en el correo electrónico por tomar un ejemplo. Dentro de cada cliente de correo se manejan listas contactos que agregadas constituyen una red social. Sin embargo, ha sido con la aparición de los sitios web de redes sociales cuando este tipo de aplicaciones web han llegado a la conciencia general. Las redes sociales se han situado entre los sitios más populares y con más tráfico de la web. Páginas como Facebook o Twitter manejan cifras asombrosas en cuanto a número de usuarios activos, de tráfico o de tiempo invertido en el sitio. Pero las funcionalidades de red social no están restringidas a las redes sociales orientadas a contactos, aquellas enfocadas a construir tu lista de contactos e interactuar con ellos. Existen otros ejemplos de sitios que aprovechan las redes sociales para aumentar la actividad de los usuarios y su involucración alrededor de algún tipo de contenido. Estos ejemplos van desde una de las redes sociales más antiguas, Flickr, orientada al intercambio de fotografías, hasta Github, la red social de código libre más popular hoy en día. No es una casualidad que la popularidad de estos sitios web venga de la mano de sus funcionalidades de red social. El escenario es más rico aún, ya que los sitios de redes sociales interaccionan entre ellos, compartiendo y exportando listas de contactos, servicios de autenticación y proporcionando un valioso canal para publicitar la actividad de los usuarios en otros sitios web. Esta funcionalidad es reciente y aún les queda un paso hasta que las redes sociales superen su condición de bunkers y lleguen a un estado de verdadera interoperabilidad entre ellas, tal como funcionan hoy en día el correo electrónico o la mensajería instantánea. Este trabajo muestra una tecnología que permite construir sitios web con características de red social distribuída. En primer lugar, se presenta una tecnología para la construcción de un componente intermedio que permite proporcionar cualquier característica de gestión de contenidos al popular marco de desarrollo web modelo-vista-controlador (MVC) Ruby on Rails. Esta técnica constituye una herramienta para desarrolladores que les permita abstraerse de las complejidades de la gestión de contenidos y enfocarse en las particularidades de los propios contenidos. Esta técnica se usará también para proporcionar las características de red social. Se describe una nueva métrica de reusabilidad de código para demostrar la validez del componente intermedio en marcos MVC. En segundo lugar, se analizan las características de los sitios web de redes sociales más populares, con el objetivo de encontrar los patrones comunes que aparecen en ellos. Este análisis servirá como base para definir los requisitos que debe cumplir un marco para construir redes sociales. A continuación se propone una arquitectura de referencia que proporcione este tipo de características. Dicha arquitectura ha sido implementada en un componente, Social Stream, y probada en varias redes sociales, tanto orientadas a contactos como a contenido, en el contexto de una asociación vecinal tanto como en proyectos de investigación financiados por la UE. Ha sido la base de varios proyectos fin de carrera. Además, ha sido publicado como código libre, obteniendo una comunidad creciente y está siendo usado más allá del ámbito de este trabajo. Dicha arquitectura ha permitido la definición de un nuevo modelo de control de acceso social que supera varias limitaciones presentes en los modelos de control de acceso para redes sociales. Más aún, se han analizado casos de estudio de sitios de red social distribuídos, reuniendo un conjunto de caraterísticas que debe cumplir un marco para construir redes sociales distribuídas. Por último, se ha extendido la arquitectura del marco para dar cabida a las características de redes sociales distribuídas. Su implementación ha sido validada en proyectos de investigación financiados por la UE. Abstract Networks are the substance of human communities and societies; they constitute the structural framework on which we relate to each other and determine the way we do it, the way information is diseminated or even the way people get things done. But network prominence goes beyond the importance it acquires in social networks. Networks are found within numerous known structures, from protein interactions inside a cell to router connections on the internet. Social networks are present on the internet since its beginnings, in emails for example. Inside every email client, there are contact lists that added together constitute a social network. However, it has been with the emergence of social network sites (SNS) when these kinds of web applications have reached general awareness. SNS are now among the most popular sites in the web and with the higher traffic. Sites such as Facebook and Twitter hold astonishing figures of active users, traffic and time invested into the sites. Nevertheless, SNS functionalities are not restricted to contact-oriented social networks, those that are focused on building your own list of contacts and interacting with them. There are other examples of sites that leverage social networking to foster user activity and engagement around other types of content. Examples go from early SNS such as Flickr, the photography related networking site, to Github, the most popular social network repository nowadays. It is not an accident that the popularity of these websites comes hand-in-hand with their social network capabilities The scenario is even richer, due to the fact that SNS interact with each other, sharing and exporting contact lists and authentication as well as providing a valuable channel to publize user activity in other sites. These interactions are very recent and they are still finding their way to the point where SNS overcome their condition of data silos to a stage of full interoperability between sites, in the same way email and instant messaging networks work today. This work introduces a technology that allows to rapidly build any kind of distributed social network website. It first introduces a new technique to create middleware that can provide any kind of content management feature to a popular model-view-controller (MVC) web development framework, Ruby on Rails. It provides developers with tools that allow them to abstract from the complexities related with content management and focus on the development of specific content. This same technique is also used to provide the framework with social network features. Additionally, it describes a new metric of code reuse to assert the validity of the kind of middleware that is emerging in MVC frameworks. Secondly, the characteristics of top popular SNS are analysed in order to find the common patterns shown in them. This analysis is the ground for defining the requirements of a framework for building social network websites. Next, a reference architecture for supporting the features found in the analysis is proposed. This architecture has been implemented in a software component, called Social Stream, and tested in several social networks, both contact- and content-oriented, in local neighbourhood associations and EU-founded research projects. It has also been the ground for several Master’s theses. It has been released as a free and open source software that has obtained a growing community and that is now being used beyond the scope of this work. The social architecture has enabled the definition of a new social-based access control model that overcomes some of the limitations currenly present in access control models for social networks. Furthermore, paradigms and case studies in distributed SNS have been analysed, gathering a set of features for distributed social networking. Finally the architecture of the framework has been extended to support distributed SNS capabilities. Its implementation has also been validated in EU-founded research projects.

Characterization of a Mo/Au thermometer for ATHENA

The first dark characterization of a thermometer fabricated with our Mo/Au bilayers to be used as a transition edge sensor is presented. High-quality, stress-free Mo layers, whose thickness is used to tune the critical temperature (TC ) down to 100 mK, are deposited by sputtering at room temperature (RT ) on Si3N4 bulk and membranes, and protected from degradation with a 15-nm sputtered Au layer. An extra layer of high-quality Au is deposited by ex situ e-beam to ensure low residual resistance. The thermometer is patterned on a membrane using standard photolithographic techniques and wet etching processes, and is contacted through Mo paths, displaying a sharp superconducting transition (α ≈ 600). Results show a good coupling between Mo and Au layers and excellent TC reproducibility, allowing to accurately correlate dM o and TC . Since dAu is bigger than ξM for all analyzed samples, bilayer residual resistance can be modified without affecting TC . Finally, first current to voltage measurements at different temperatures are measured and analyzed, obtaining the corresponding characterization parameters.

Symmetry issues in Directly Irradiated Targets

In direct drive Inertial Confinement Fusion (ICF), the typical laser beam to laser beam angle is around 30o. This fact makes the study of the irradiation symmetry agenuine 3D problem. In this paper we use the three dimensional version of the MULTI hydrocode to assess the symmetry of such ICF implosions. More specifically, we study a shock-ignition proposal for the Laser-M´egajoule facility (LMJ) in which two of the equatorial beam cones are used to implode and pre compress a spherical capsule (the “reference” capsule of HiPER project) made of 0.59 mg of pure Deuterium-Tritium mixture. The symmetry of this scheme is analysed and optimized to get a design inside the operating limits of LMJ. The studied configuration has been found essentially axial-symmetric, so that the use of 2D hydrocodes would be appropriate for this specific situation

Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates

Composite laminates on the nanoscale have shown superior hardness and toughness, but little is known about their high temperature behavior. The mechanical properties (elastic modulus and hardness) were measured as a function of temperature by means of nanoindentation in Al/SiC nanolaminates, a model metal–ceramic nanolaminate fabricated by physical vapor deposition. The influence of the Al and SiC volume fraction and layer thicknesses was determined between room temperature and 150 °C and, the deformation modes were analyzed by transmission electron microscopy, using a focused ion beam to prepare cross-sections through selected indents. It was found that ambient temperature deformation was controlled by the plastic flow of the Al layers, constrained by the SiC, and the elastic bending of the SiC layers. The reduction in hardness with temperature showed evidence of the development of interface-mediated deformation mechanisms, which led to a clear influence of layer thickness on the hardness.

Accessing and managing open medical resources in Africa over the Internet

Recent commentaries have proposed the advantages of using open exchange of data and informatics resources for improving health-related policies and patient care in Africa. Yet, in many African regions, both private medical and public health information systems are still unaffordable. Open exchange over the social Web 2.0 could encourage more altruistic support of medical initiatives. We have carried out some experiments to demonstrate the feasibility of using this approach to disseminate open data and informatics resources in Africa. After the experiments we developed the AFRICA BUILD Portal, the first Social Network for African biomedical researchers. Through the AFRICA BUILD Portal users can access in a transparent way to several resources. Currently, over 600 researchers are using distributed and open resources through this platform committed to low connections.

A simplified spectral approachfor impedance-based damage identification of frp-strengthened rc beams

Hoy en día, el refuerzo y reparación de estructuras de hormigón armado mediante el pegado de bandas de polímeros reforzados con fibras (FRP) se emplea cada vez con más frecuencia a causa de sus numerosas ventajas. Sin embargo, las vigas reforzadas con esta técnica pueden experimentar un modo de fallo frágil a causa del despegue repentino de la banda de FRP a partir de una fisura intermedia. A pesar de su importancia, el número de trabajos que abordan el estudio de este mecanismo de fallo y su monitorización es muy limitado. Por ello, el desarrollo de metodologías capaces de monitorizar a largo plazo la adherencia de este refuerzo a las estructuras de hormigón e identificar cuándo se inicia el despegue de la banda constituyen un importante desafío a abordar. El principal objetivo de esta tesis es la implementación de una metodología fiable y efectiva, capaz de detectar el despegue de una banda de FRP en una viga de hormigón armado a partir de una fisura intermedia. Para alcanzar este objetivo se ha implementado un procedimiento de calibración numérica a partir de ensayos experimentales. Para ello, en primer lugar, se ha desarrollado un modelo numérico unidimensional simple y no costoso representativo del comportamiento de este tipo vigas de hormigón reforzadas con FRP, basado en un modelo de fisura discreta para el hormigón y el método de elementos espectrales. La formación progresiva de fisuras a flexion y el consiguiente despegue en la interface entre el hormigón y el FRP se formulan mediante la introducción de un nuevo elemento capaz de representar ambos fenómenos simultáneamente sin afectar al procedimiento numérico. Además, con el modelo propuesto, se puede obtener de una forma sencilla la respuesta dinámica en altas frecuencias de este tipo de estructuras, lo cual puede hacer muy útil su uso como herramienta de diagnosis y detección del despegue en su fase inicial mediante una monitorización de la variación de las características dinámicas locales de la estructura. Un método de evaluación no destructivo muy prometedor para la monitorización local de las estructuras es el método de la impedancia usando sensores-actuadores piezoeléctricos (PZT). La impedancia eléctrica de los sensores PZT se puede relacionar con la impedancia mecánica de las estructuras donde se encuentran adheridos Ya que la impedancia mecánica de una estructura se verá afectada por su deterioro, se pueden implementar indicadores de daño mediante una comparación del espectro de admitancia (inversa de la impedancia) a lo largo de distintas etapas durante el periodo de servicio de una estructura. Cualquier cambio en el espectro se podría interpretar como una variación en la integridad de la estructura. La impedancia eléctrica se mide a altas frecuencias con lo cual esta metodología debería ser muy sensible a la detección de estados de daño incipiente local, tal como se desea en la aplicación de este trabajo. Se ha implementado un elemento espectral PZT-FRP como extensión del modelo previamente desarrollado, con el objetivo de poder calcular numéricamente la impedancia eléctrica de sensores PZT adheridos a bandas de FRP sobre una viga de hormigón armado. El modelo, combinado con medidas experimentales captadas mediante sensores PZT, se implementa en el marco de una metodología de calibración de modelos para detectar cuantitativamente el despegue en la interfase entre una banda de FRP y una viga de hormigón. El procedimiento de optimización se resuelve empleando el método del enjambre cooperativo con un algoritmo bagging. Los resultados muestran una gran aproximación en la estimación del daño para el problema propuesto. Adicionalmente, se ha desarrollado también un método adaptativo para el mallado de elementos espectrales con el objetivo de localizar las zonas dañadas a partir de los resultados experimentales, el cual contribuye a aumentar la robustez y efectividad del método propuesto a la hora de identificar daños incipientes en su aparición inicial. Finalmente, se ha llevado a cabo un procedimiento de optimización multi-objetivo para detectar el despegue inicial en una viga de hormigón a escala real reforzada con FRP a partir de las impedancias captadas con una red de sensores PZT instrumentada a lo largo de la longitud de la viga. Cada sensor aporta los datos para definir cada una de las funciones objetivo que definen el procedimiento. Combinando el modelo previo de elementos espectrales con un algoritmo PSO multi-objetivo el procedimiento de detección de daño resultante proporciona resultados satisfactorios considerando la escala de la estructura y todas las incertidumbres características ligadas a este proceso. Los resultados obtenidos prueban la viabilidad y capacidad de los métodos antes mencionados y también su potencial en aplicaciones reales. Abstract Nowadays, the external bonding of fibre reinforced polymer (FRP) plates or sheets is increasingly used for the strengthening and retrofitting of reinforced concrete (RC) structures due to its numerous advantages. However, this kind of strengthening often leads to brittle failure modes being the most dominant failure mode the debonding induced by an intermediate crack (IC). In spite of its importance, the number of studies regarding the IC debonding mechanism and bond health monitoring is very limited. Methodologies able to monitor the long-term efficiency of bonding and successfully identify the initiation of FRP debonding constitute a challenge to be met. The main purpose of this thesisis the implementation of a reliable and effective methodology of damage identification able to detect intermediate crack debonding in FRP-strengthened RC beams. To achieve this goal, a model updating procedure based on numerical simulations and experimental tests has been implemented. For it, firstly, a simple and non-expensive one-dimensional model based on the discrete crack approach for concrete and the spectral element method has been developed. The progressive formation of flexural cracks and subsequent concrete-FRP interfacial debonding is formulated by the introduction of a new element able to represent both phenomena simultaneously without perturbing the numerical procedure. Furthermore, with the proposed model, high frequency dynamic response for these kinds of structures can also be obtained in a very simple and non-expensive way, which makes this procedure very useful as a tool for diagnoses and detection of debonding in its initial stage by monitoring the change in local dynamic characteristics. One very promising active non-destructive evaluation method for local monitoring is impedance-based structural health monitoring(SHM)using piezoelectric ceramic (PZT) sensor-actuators. The electrical impedance of the PZT can be directly related to the mechanical impedance of the host structural component where the PZT transducers are attached. Since the structural mechanical impedance will be affected by the presence of structural damage, comparisons of admittance (inverse of impedance) spectra at various times during the service period of the structure can be used as damage indicator. Any change in the spectra might be an indication of a change in the structural integrity. The electrical impedance is measured at high frequencies with which this methodology appears to be very sensitive to incipient damage in structural systems as desired for our application. Abonded-PZT-FRP spectral beam element approach based on an extension of the previous discrete crack approach is implemented in the calculation of the electrical impedance of the PZT transducer bonded to the FRP plates of a RC beam. This approach in conjunction with the experimental measurements of PZT actuator-sensors mounted on the structure is used to present an updating methodology to quantitatively detect interfacial debonding between a FRP strip and the host RC structure. The updating procedure is solved by using an ensemble particle swarm optimization approach with abagging algorithm, and the results demonstrate a big improvement for the performance and accuracy of the damage detection in the proposed problem. Additionally, an adaptive strategy of spectral element mesh has been also developed to detect damage location with experimental results, which shows the robustness and effectiveness of the proposed method to identify initial and incipient damages at its early stage. Lastly, multi-objective optimization has been carried out to detect debonding damage in a real scale FRP-strengthened RC beam by using impedance signatures. A net of PZT sensors is distributed along the beam to construct impedance-based multiple objectives under gradually induced damage scenario. By combining the spectral element model presented previously and an ensemble multi-objective PSO algorithm, the implemented damage detection process yields satisfactory predictions considering the scale and uncertainties of the structure. The obtained results prove the feasibility and capability of the aforementioned methods and also their potentials in real engineering applications.