886 resultados para Reação álcali-agregado


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Behavioral Finance develop as it is perceived anomalies in these markets efficient. This fields of study can be grouped into three major groups: heuristic bias, tying the shape and inefficient markets. The present study focuses on issues concerning the heuristics of representativeness and anchoring. This study aimed to identify the then under-reaction and over-reaction, as well as the existence of symmetry in the active first and second line of the Brazilian stock market. For this, it will be use the Fuzzy Logic and the indicators that classify groups studied from the Discriminant Analysis. The highest present, indicator in the period studied, was the Liabilities / Equity, demonstrating the importance of the moment to discriminate the assets to be considered "winners" and "losers." Note that in the MLCX biases over-reaction is concentrated in the period of financial crisis, and in the remaining periods of statistically significant biases, are obtained by sub-reactions. The latter would be in times of moderate levels of uncertainty. In the Small Caps the behavioral responses in 2005 and 2007 occur in reverse to those observed in the Mid-Large Cap. Now in times of crisis would have a marked conservatism while near the end of trading on the Bovespa speaker, accompanied by an increase of negotiations, there is an overreaction by investors. The other heuristics in SMLL occurred at the end of the period studied, this being a under-reaction and the other a over-reaction and the second occurring in a period of financial-economic more positive than the first. As regards the under / over-reactivity in both types, there is detected a predominance of either, which probably be different in the context in MLCX without crisis. For the period in which such phenomena occur in a statistically significant to note that, in most cases, such phenomena occur during the periods for MLCX while in SMLL not only biases are less present as there is no concentration of these at any time . Given the above, it is believed that while detecting the presence of bias behavior at certain times, these do not tend to appear to a specific type or heuristics and while there were some indications of a seasonal pattern in Mid- Large Caps, the same behavior does not seem to be repeated in Small Caps. The tests would then suggest that momentary failures in the Efficient Market Hypothesis when tested in semistrong form as stated by Behavioral Finance. This result confirms the theory by stating that not only rationality, but also human irrationality, is limited because it would act rationally in many circumstances

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nickel-based catalysts supported on alumina have been widely used in various reactions to obtain synthesis gas or hydrogen. Usually, higher conversion levels are obtained by these catalysts, however, the deactivation by coke formation and sintering of metal particles are still problems to be solved. Several approaches have been employed in order to minimize these problems, among which stands out in recent years the use of additives such as oxides of alkali metals and rare earths. Similarly, the use of methodologies for the synthesis faster, easier, applicable on an industrial scale and to allow control of the microstructural characteristics of these catalysts, can together provide the solution to this problem. In this work, oxides with spinel type structure AB2O4, where A represents divalent cation and B represents trivalent cations are an important class of ceramic materials investigated worldwide in different fields of applications. The nickel cobaltite (NiCo2O4) was oxides of spinel type which has attracted considerable interest due to its applicability in several areas, such as chemical sensors, flat panel displays, optical limiters, electrode materials, pigments, electrocatalysis, electronic ceramics, among others. The catalyst precursor NiCo2O4 was prepared by a new chemical synthesis route using gelatine as directing agent. The polymer resin obtained was calcined at 350°C. The samples were calcined at different temperatures (550, 750 and 950°C) and characterized by X ray diffraction, measurements of specific surface area, temperature programmed reduction and scanning electron microscopy. The materials heat treated at 550 and 750°C were tested in the partial oxidation of methane. The set of techniques revealed, for solid preparations, the presence of the phase of spinel-type structure with the NiCo2O4 NixCo1-xO solid solution. This solid solution was identified by Rietveld refinement at all temperatures of heat treatment. The catalyst precursors calcined at 550 and 750°C showed conversion levels around 25 and 75%, respectively. The reason H2/CO was around 2 to the precursor treated at 750°C, proposed reason for the reaction of partial oxidation of methane, one can conclude that this material can be shown to produce synthesis gas suitable for use in the synthesis Fischer-Tropsch process

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 º C for 2 hours, calcined at 800 º C for 6h in air atmosphere. In gel-combustion method were produced and oxides using urea and citric acid as fuel, forming for each fuel the following oxides Ferrate of Lanthanum, Cobaltato of Lanthanum and Ferrato of Cobalt and Lanthanum, which were submitted to the combustion process assisted by microwave power maximum of 10min. The samples were characterized by: thermogravimetric analysis, X-ray diffraction; fisisorção of N2 (BET method) and scanning electron microscopy. The reactions catalytic of depolymerization of poly (methyl methacrylate), were performed in a reactor of silica, with catalytic and heating system equipped with a data acquisition system and the gas chromatograph. For the catalysts synthesized using the polymeric precursor method, the cuprate of lanthanum was best for the depolymerization of the recycled polymer, obtaining 100% conversion in less time 554 (min), and the pure polymer, was the Niquelate of Lanthanum, with 100% conversion in less time 314 (min). By gel-combustion method using urea as fuel which was the best result obtained Ferrate of Lanthanum for the pure polymer with 100% conversion in less time 657 (min), and the recycled polymer was Cobaltate of Lanthanum with 100 % conversion in less time 779 (min). And using citric acid to obtain the best result for the pure polymer, was Ferrate of Lanthanum with 100% conversion in less time 821 (min and) for the recycled polymer, was Ferrate of Lanthanum with 98.28% conversion in less time 635 (min)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nickel-bases catalysts have been used in several reform reactions, such as in the partial oxidation of methane to obtain H2 or syngas (H2 + CO). High levels of conversion are usually obtained using this family of catalysts, however, their deactivation resulting from carbon deposition still remains a challenge. Different approaches have been tested aiming at minimizing this difficulty, including the production of perovskites and related structures using modern synthesis methods capable of producing low cost materials with controlled microstructural characteristics at industrial scale. To establish grounds for comparison, in the present study LaNixFe1-xO3 (x=0, 0.3 or 0.7) perovskites were prepared following the Pechini method and by microwave assisted self-combustion. All samples were sub sequently calcined at 900 °C to obtain the target phase. The resulting ceramic powders were characterized by thermogravimetric analysis, infrared spectroscopy, X ray diffraction, specific area and temperature programmed reduction tests. Calcined samples were also used in the partial oxidation reaction of methane to evaluate the level of conversion, selectivity and carbon deposition. The results showed that the calcined samples were crystalline and the target phase was formed regardless of the synthesis method. According to results obtained by Rietveld refinement, we observed the formation of 70.0% of LaNi0.3Fe0.7O3 and 30.0% of La2O3 for samples LN3F7-900- P, LN3F7-900-M and 41,6% of LaNi0.7Fe0.3O3, 30.7% of La2NiO4 and 27.7% of La2O3 for samples LN7F3-900-P and LN7F3-900-M.Temperature-programmed profiles of the LaNiO3 sample revealed the presence of a peak around 510 °C, whereas the LaFeO3 sample depicted a peak above 1000°C. The highest l evel of methane conversion was obtained for LaNiO3 synthesized by the Pechini method. Overall, catalysts prepared by the Pechini method depicted better conversion levels compared to those produced by microwave assisted self-combustion

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In recent years, the area of advanced materials has been considerably, especially when it comes to materials for industrial use, such as is the case with structured porosity of catalysts suitable for catalytic processes. The use of catalysts combined with the fast pyrolysis process is an alternative to the oxygenate production of high added value, because, in addition to increasing the yield and quality of products, allows you to manipulate the selectivity to a product of interest, and therefore allows greater control over the characteristics of the final product. Based on these arguments, in this work were prepared titanium catalysts supported on MCM-41 for use in catalytic pyrolysis of biomass, called elephant grass. The reactions of pyrolysis of biomass were performed in a micro pyrolyzer, Py-5200, coupled to GC / MS, the company CDS Corporation, headquartered in the United States. The catalysts Ti-MCM-41 in different molar ratios were characterized by XRD, TG / DTG, FT-IR, SEM, XRF, UV-visible adsorption of nitrogen and the distribution of particle diameter and specific surface area measurement by the BET method. From the catalytic tests it was observed that the catalysts synthesized showed good results for the pyrolysis reaction.The main products were obtained a higher yield of aldehydes, ketones and furan. It was observed that the best reactivity is a direct function of the ratio Si/Ti, nature and concentration of the active species on mesoporous supports. Among the catalysts Ti-MCM-41 (molar ratio Si / Ti = 25 and 50), the ratio Si / Ti = 25 (400 ° C and 600 ° C) favored the cracking of oxygenates such as acids , aldehydes, ketones, furans and esters. Already the sample ratio Si / Ti = 50 had the highest yield of aromatic oxygenates

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The refractory metal carbides have proven important in the development of engineering materials due to their properties such as high hardness, high melting point, high thermal conductivity and high chemical stability. The niobium carbide presents these characteristics. The compounds of niobium impregnated with copper also have excellent dielectric and magnetic properties, and furthermore, the Cu doping increases the catalytic activity in the oxidation processes of hydrogen. This study aimed to the synthesis of nanostructured materials CuNbC and niobium and copper oxide from precursor tris(oxalate) oxiniobate ammonium hydrate through gas-solid and solid-solid reaction, respectively. Both reactions were carried out at low temperature (1000°C) and short reaction time (2 hours). The niobium carbide was produced with 5 % and 11% of copper, and the niobium oxide with 5% of copper. The materials were characterized by X-Ray Diffraction (XRD), Rietveld refinement, Scanning Electron Microscopy (SEM), X-Ray Fluorescence Spectroscopy (XRF), infrared spectroscopy (IR), thermogravimetric (TG) and differential thermal analysis (DTA , BET and particle size Laser. From the XRD analysis and Rietveld refinement of CuNbC with S = 1.23, we observed the formation of niobium carbide and metallic copper with cubic structure. For the synthesis of mixed oxide made of niobium and copper, the formation of two distinct phases was observed: CuNb2O6 and Nb2O5, although the latter was present in small amounts

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Com o objetivo de reproduzir sintomas de malformação de raízes, observados em campo, foram estuda dos os efeitos do trifluralin sobre Arachis hypogaea L., cultivar Tatu, em condições de vaso, em Jaboticabal, SP. Quatro formulações de trifluralin foram aplicadas em solo Latossol Roxo - série Jaboticabal, barro argiloso, com 2,7% de matéria orgânica, em dosagem correspondentes a 1,5; 3,0 e 6,0 litros da formulação comercial por ha. Cada vaso contendo 2,5 1 -de solo, recebeu duas sementes pré -germinada s e foi mantido sob condições de casa-de-vegetação durante 29 dias. Foi adotado o delineamento inteiramente casualizado com treze tratamentos e quatro repetições, perfazendo total de 52 parcelas. Aos 29 dias as plantas, foram retiradas e determinadas as seguintes características: peso da matéria seca das raízes, dos caules, dos pecíolos e dos folíolos; número de folíolos; área foliar e comprimento da haste principal. Alterações morfológicas externas e internas foram observadas. Os resultados mostraram que as partes subter rân eas das plantas foram afetadas, com uma correlação linear negativa e significativa entre o aumento da dose dos herbicidas e peso da matéria. As folhas se mostraram pouco sensíveis, sendo que nenhuma das formulações diminuiu o número de foliolos da planta. A área foliar e o peso da matéria seca dos folíolos somente foram afetados pelo aumento da dose de T. Fecotrigo com va lores de F iguais a 9,62* e 7,61*, respectivamente. de modo geral,po de-se concluir que o maior efeito ocorre devido ao incremento nas doses e não devido a possiveis diferenças entre os tipos de formula ções testadas. Quanto a alterações morfológicas observou-se que nas doses mais elevadas houve grande diminuição na quantidade de raízes, com raízes secundárias curtas e grossas. O hipocótilo emitiu raízes até a altura do nó cotiledonar. Na dose de 3,0 1/ha já foram notadas raízes secundárias um pouco mais espessas que na dose de 1,5 1/ha. As lâminas histológicas de amostras da re gião do hipocótilo mostraram parên quima cortical bastante espesso, de vido ao maior numero de camadas de células, porém não se notou anormalidade na forma das células, nem nos demais tecidos da região estudada.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Um amplo projeto de estudos sobre a utilização do umezeiro como porta-enxerto para pessegueiro está sendo desenvolvido na FCAV/UNESP, Câmpus de Jaboticabal-SP, devido, especialmente, às promissoras características para uso como redutor de vigor da copa e sua boa qualidade de frutos. Alguns trabalhos na literatura citam o umezeiro como resistente ao nematóide das galhas, entretanto dispõe-se de poucas informações. Neste trabalho, teve-se por objetivo estudar a reação de clones de umezeiro e cultivares de pessegueiro a Meloidogyne javanica. O experimento foi conduzido em casa de vegetação, com 6 tratamentos (Clones 05; 10 e 15 de umezeiro e as cultivares Okinawa, Aurora-1 e Dourado-1 de pessegueiro) e 9 repetições. As plantas foram mantidas em vasos de cerâmica contendo uma mistura de solo e areia (1:1, v/v), previamente autoclavada a 121ºC e 1kgf.cm-2 por 2 horas. Aos sessenta dias após o plantio, cada planta foi inoculada com 3.000 ovos e juvenis de segundo estádio de Meloidogyne javanica. Aos 100 dias após a inoculação, as plantas foram colhidas para avaliação da massa de matéria fresca do sistema radicular, número de galhas por sistema radicular, número de ovos e juvenis por 10 g de raízes, número de ovos e juvenis por sistema radicular e fator de reprodução. Verificou-se que todos os clones e cultivares de umezeiro e pessegueiro, respectivamente, mostraram-se resistentes a Meloidogyne javanica.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aimed to characterize molecular of 13 accessions of Psidium spp. (Myrtaceae) that was been identified for the reaction to rootknot guava nematode. The DNA extraction of the samples was carried according to the protocol of Shillito & Saul (1988). The molecular markers type fAFLP, were obtained from fAFLP Regular Plant Genomes Fingerprinting Kit' (Applied Biosystems from Brasil Ltda.) and were tested 24 selectives combinations of primers, of which 18 showed amplification that produced 272 polymorphic markers. To the analysis of the markers were employed the softwares GeneScan (ABI Prism versao 1.0) and Genotyper (ABI Prism version 1.03), and the data collected were transformed into a binary matrix that was analyzed in the software PAUP (Phylogenetic Analysis Using Parcimony - version 3.01). Were calculated genetic distance index intra and interespecific between the genotipes. It was found that the AFLP markers were efficient in the discrimination between accessions, as well as in showing genetic similarity among accessions identified as resistant to the nematode Meloidogyne enterolobii, which could be discussed in the future.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the period of 2001/2002 a population of Meloidogyne javanica was found infecting a soybean cultivar 'CD 208" considered resistant in a field located in the County of Nuporanga, state of São Paulo (SP), Brazil. Due to this fact, it was evaluated the resistance of some of the main cultivars used in areas of the Cooperativa dos Agricultores, in Orlandia (CAROL), SP. The study was carried out in greenhouse conditions of the Departamento de Fitossanidade (Plant Protection) da UNESP/FCAV, Campus of Jaboticabal, SP, in clay pots of 5 liters. Five individual plants of the cultivars BRS 133, BRS 183, BRSMG 68, BRSMG Garantia, CD 201, MG/BR-46 Conquista, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 48, IAC 22, M-SOY 7901, M-SOY 8001 and M-SOY 8400 were inoculated with 3,000 eggs and second estage juveniles of the nematode, seven days after seed germination and the evaluation was carried out 57 days after inoculation. Galls, egg masses and the reproduction factor were determined. The results pointed out that the cultivar BRSMG Garantia was tolerant to the nematode population and all others were susceptibles.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo deste trabalho foi determinar o comportamento de variedades de laranjas-doces quanto à resistência a Guignardia citricarpa, agente causal da mancha preta dos citros (MPC). Os ensaios foram conduzidos em dois campos, nos municípios de Rincão e Tambaú, SP. As mudas foram formadas em viveiro localizado na Estação Experimental de Citricultura de Bebedouro-SP. Para tal, foram utilizadas borbulhas de plantas cítricas existentes no Banco Ativo de Germoplasma de Citros da Estação Experimental de Citricultura de Bebedouro (EECB), Bebedouro-SP. Avaliou-se a severidade da doença por meio de escala de notas, de zero (ausência de sintomas) a seis (sintomas severos). A partir de tais dados, foi calculado o valor do índice de doença (ID). em 2007, no experimento de Rincão, dentre as 65 variedades avaliadas, apenas 59 produziram frutos, sendo constatada ausência de sintomas da doença em Castellana, Maçã e Olivelands. Nas demais variedades, os níveis de severidade variaram de 0,35 para Grada a 3,0 para China SRA-547. Para Tambaú, os valores de severidade variaram de 0,40 para a variedade Cadenera a 2,46 para Pera. No ano de 2008, em Rincão, todas as variedades mostraram-se suscetíveis. Os níveis de severidade verificados variaram de 0,18 para a variedade Belladona, e 3,92 para Vera 97. em Tambaú, somente a variedade Navelina não apresentou sintomas da MPC. Foi observado que, dentre as plantas que frutificaram, e com exceção daquelas cujos frutos mostraram-se assintomáticos, os valores de severidade variaram de 0,11 para a variedade Tua Mamede a 3,57 para Amares.