Acute ingestion of a meal rich in n-3 polyunsaturated fatty acids results in rapid gastric emptying in humans

Background: n-3 Polyunsaturated fatty acids (PUFAs) have proven benefits for both the development of atherosclerosis and inflammatory conditions. The effects on atherosclerosis may be partly mediated by the observed reduction in fasting and postprandial triacylglycerol concentrations after both acute and chronic n-3 PUFA ingestion. Objective: The aim of this study was to assess gastric emptying and gastrointestinal hormone release after the consumption of mixed meals rich in n-3 PUFAs or other classes of fatty acids. Design: Ten healthy women (aged 50–62 y) completed 4 separate study visits in a single-blind, randomized design. On each occasion, subjects consumed 40 g oil rich in either saturated fatty acids, monounsaturated fatty acids, n-6 PUFAs, or n-3 PUFAs as part of a mixed meal. [1-13C]Octanoic acid (100 mg) was added to each oil. Gastric emptying was assessed by a labeled octanoic acid breath test, and concentrations of gastrointestinal hormones and plasma lipids were measured. Results: Recovery of 13C in breath was enhanced after n-3 PUFA ingestion (P < 0.005). The cholecystokinin response after the n-3 PUFA meal was significantly delayed (P < 0.001), and the glucagon-like peptide 1 response was significantly reduced (P < 0.05). Conclusion: The inclusion of n-3 PUFAs in a meal alters the gastric emptying rate, potentially as the result of changes in the pattern of cholecystokinin and glucagon-like peptide 1 release.

Passive and active hybrid approach to buildings design in Saudi Arabia

The building sector is one of the highest consumers of energy in the world. This has led to high dependency on using fossil fuel to supply energy without due consideration to its environmental impact. Saudi Arabia has been through rapid development accompanied by population growth, which in turn has increased the demand for construction. However, this fast development has been met without considering sustainable building design. General design practices rely on using international design approaches and features without considering the local climate and aspects of traditional passive design. This is by constructing buildings with a large amount of glass fully exposed to solar radiation. The aim of this paper is to investigate the development of sustainability in passive design and vernacular architecture. Furthermore, it compares them with current building in Saudi Arabia in terms of making the most of the climate. Moreover, it will explore the most sustainable renewable energy that can be used to reduce the environmental impact on modern building in Saudi Arabia. This will be carried out using case studies demonstrating the performance of vernacular design in Saudi Arabia and thus its benefits in terms of environmental, economic and social sustainability. It argues that the adoption of a hybrid approach can improve the energy efficiency as well as reduce the carbon footprint of buildings. This is by combining passive design, learning from the vernacular architecture and implementing innovative sustainable technologies.

Design and analysis of a haptic device design for large and fast movements

Haptic devices tend to be kept small as it is easier to achieve a large change of stiffness with a low associated apparent mass. If large movements are required there is a usually a reduction in the quality of the haptic sensations which can be displayed. The typical measure of haptic device performance is impedance-width (z-width) but this does not account for actuator saturation, usable workspace or the ability to do rapid movements. This paper presents the analysis and evaluation of a haptic device design, utilizing a variant of redundant kinematics, sometimes referred to as a macro-micro configuration, intended to allow large and fast movements without loss of impedance-width. A brief mathematical analysis of the design constraints is given and a prototype system is described where the effects of different elements of the control scheme can be examined to better understand the potential benefits and trade-offs in the design. Finally, the performance of the system is evaluated using a Fitts’ Law test and found to compare favourably with similar evaluations of smaller workspace devices.

Design of user interfaces for job shop environment

User-computer interface development has gone through rapid development in recent years. These developments, however, have not yet been fully implemented in management information system (MIS) design for job shop manufacturing situations. Most of the commercially available MISs are operationally inflexible and do not support management in report generation and decision making, particularly in job shops. This paper describes a framework in developing system user interfaces for job shop manufacturing situations to highlight how a generic information system can be made more useful to managerial decision making. Object-oriented programming technology has been used to provide flexible access to information stored by a generic MIS. Twenty interfacing programs have been developed. For illustration, only three of those interface programs relating to generation of strategic level management reports are discussed here.

Learning = playing: Interactive learning with game-based design principles

This paper explores the rapid escalation of demand for information in both complex and convergent forms of accessible technology. The authors contend that this growth creates a concomitant demand for a highly skilled information technology workforce. To ensure the preservation and continued development of this workforce, education of the information technology professional is increasingly acknowledged as one of the primary challenges
confronting educators and educational institutions. Many institutions have sought solutions to this educational conundrum in populist concepts of e-learning

Design, fabrication and evaluation of universal polymerase chain reaction devices

Novel and low cost PCR devices were developed to perform rapid polymerase chain reaction based diagnostics for infectious diseases. The main advantages of using these devices are that it can perform multi sample and also multiplexing of DNA samples woth low sample volume compared to the conventional PCR devices.

Gaussian vault geometry : digital design and fabrication of scaled prototypes

This paper reports on three approaches to the translation of Gaussian surface models into scaled physical prototype models. Using the geometry of Eladio Dieste's Gaussian Vaults, the paper reports on the aspects encountered in the process of digital to physical prototype fabrication. The primary focus of the paper is on exploring the design geometry, investigating methods for preparing the geometry for fabrication and constructing physical prototypes. Three different approaches in the translation from digital to physical models are investigated: rapid prototyping, two dimensional surface models in paper and structural component models using Computer Numerical Controlled (CNC) fabrication. The three approaches identify a body of knowledge in the design and prototyping of Gaussian vaults. Finally the paper discusses the digital to. fabrication translation processes with regards to the characteristics, benefits and limitations of the three approaches of prototyping the ruled surface geometry of Gaussian Vaults.

Geometric and material constraints in parametric modelling : the design to fabrication process

Parametric modelling, commonly used in the automotive and aerospace industries, has recently been adopted in the architecture and construction fields. The ability to design small repeatable components and apply them to a larger governing surface geometry is one area of parametric modelling that has great design potential. This two level modelling control, of component and overall surface, can allow designers to explore new types of form generation subject to parametric constraints. This paper reports on the design to fabrication process using repeatable components over a governing or carrier surface. The paper reports on our study of the requirements and possible solutions for successfully controlling a repeatable element, known as a Representative Volumetric Element (RVE), using geometric parameters of a larger governing surface geometry and material properties. This modelling process, coupled with Rapid
Manufacturing (RM) and Computer Numerically Controlled (CNC) machines has the potential to significantly reduce the interface between design and fabrication.

Design and construction of a micropump for drug delivery applications

This paper presents design, construction, and evaluation of a micropump for drug delivery applications. The proposed micropump consists of three components: fluidics, electronics, and software. The fluidics component includes a silicone elastic diaphragm, a microservo, housing and two check valves. The diaphragm is modeled and simulated to establish its geometrical specifications. The housing is built using a rapid prototype machine. The electronics component consists of a microcontroller, a microswitch array, a simple display and a power unit. The software component is written in C and receives inputs from user, controls the microservo speed and displays the programmed speed. A number of experiments are conducted to evaluate the performance and capabilities of the micropump. The experiments focus on measurement of flow rate, dosage and duration of operation. A discussion of the performance and capabilities of the developed micropump is also given.

Enriching student experience and inter-professional learning of inclusive design with Second Life

This position paper reflects rapid advances in immersive 2D and 3D eLearning technologies and the expanding pool of ideas and applications in higher education across two professions. Inspiration has been drawn from examples in design learning, and various multidisciplinary collaborative projects through developmental research in Multi-User Virtual Environments (MUVEs). Linden Lab's Second Life (SL) is the most mature and popular of the ‘persistent’ virtual worlds. The study described in this paper aims to increase the authenticity of student learning through a range of SL simulated ‘life experiences’ relating to accessibility and mobility in the built environment. Significantly, the successes of such initiatives lie in several elements: teaching champions with vision and courage; detailed scripting of precise role-play encounters for first-time users to provide supportive ‘blended learning’ contexts; careful and vigilant strategic management of facilities and resources, and a robust design program. This paper focuses on the crucial alignment of these elements to the specific challenges of designing and navigating conception and development processes, to enable the execution and delivery of a tightly defined script for meaningful and memorable learning outcomes. This innovative pedagogical approach lacks time-tested outcomes, but is recognised equally as opportunity and challenge; risk and reward.

Lab-on-a-Chip turns soft : computer-aided, software-enabled microfluidics design

The current practice of designing microfluidic Lab-on-a-Chip (LoCs) limits reusing designs and makes sharing tasks among researchers difficult. One way to achieve that objective is to borrow best practices from engineering. Also it takes a lot of skills to design LoCs. Design-by-assembly in which a LoC can be designed by configuring, laying out subsystems can help new researchers to develop custom chips. Flexible, reusable, and rapid-prototyping-feasible LoC designs can be achieved by fabricated modular microfluidic blocks. However, challenging problems still persist, which limit the usefulness of prefabricated blocks. We propose software microfluidic modules (SoftMABs) based design technique to solve issues fabricated modules face. By configuring SoftMABs, integrating them, the new assembly of SoftMABs can form a 3D LoC design ready to be prototyped. The proposed method can make designing a complex LoC less challenging, and collaborating among laboratories easier. We created SoftMABs and designed a custom microfluidic chip by assembling SoftMABs like LEGOs, dragging-and-dropping them. Later we reconfigured them - by replacing a SoftMAB with another module - to make a new LoC. We believe this computeraided method is an interesting and useful LoC design technique.

The rapid assessment of disability – informing the development of an instrument to measure the effectiveness of disability inclusive development through a qualitative study in Bangladesh

Purpose
The Rapid Assessment of Disability (RAD) questionnaire was developed to provide governments and development agencies with an appropriate instrument to determine the prevalence of people with disability within their target populations, and to design and evaluate the effectiveness of disability inclusive activities in addressing their priorities and needs.
Methods
The RAD questionnaire was developed using two conceptual frameworks: the United Nations Convention on the Rights of Persons with Disabilities (UNCRPD), and the International Classification of Functioning, Disability and Health (ICF). Existing instruments were reviewed to inform the structure and content of the RAD questionnaire. The RAD questionnaire that was developed for field testing in Bangladesh comprised both a household questionnaire and a questionnaire for individuals within each household, with 5 sections: 1) Demographic information, 2) Assessment of functioning, 3) Awareness of rights of people with disability, 4) Well-being and quality of life, 5) Participation in the community.
Prior to field-testing the RAD questionnaire in Bangladesh, a qualitative study was conducted to ensure the relevance of the questionnaire in the context of a developing country. In-depth interviews with 9 people with disability and a focus group of 8 parents of children with disability were conducted in Dhaka, Bangladesh.
Results
Qualitative findings highlighted factors relevant to the lives of people with disability in Bangladesh, including discrepancies between the awareness and attainment of rights for people with disability, the wellbeing of people with disability and their families, as well as numerous barriers to full participation in their community. While the findings confirmed that the design and content of the questionnaire reflected all these aspects, some changes were made to the items in the questionnaire to ensure that it reflected the views of people with disability from the context of a developing country.
Conclusions and Implications
This qualitative study was an important step in the development of the RAD questionnaire as it helped to achieve its aim - namely, to establish the prevalence of disability and to assist in the design and evaluation of disability inclusive interventions in the setting of a developing country.

Characteristics and outcomes of patients requiring rapid response system activation within 24 hours of emergency admission

Objectives: