Teleportation improvement by conditional measurements on the two-mode squeezed vacuum

We show that by making conditional measurements on the Einstein-Podolsky-Rosen (EPR) squeezed vacuum [T. Opatrny, G. Kurizki, and D.-G. Welsch, Phys. Rev. A 61, 032302 (2000)], one can improve the efficacy of teleportation for both the position-difference, momentum-sum, and number-difference, phase-sum continuous variable teleportation protocols. We investigate the relative abilities of the standard and conditional EPR states, and show that by conditioning we can improve the fidelity of teleportation of coherent states from below to above the (F) over bar =2/3 boundary, thereby achieving unambiguously quantum teleportation.

Productivity growth in Australian manufacturing sector: some new evidence

This article examines the productivity performance of Australia's manufacturing sector by decomposing its output growth into input growth, technological progress and gains in technical efficiency. This three-way decomposition is done with an improved version of the stochastic frontier model using eight, two-digit industry level data from 1968/9 to 1994/5. Empirical evidence shows that input growth fueled output growth from 1968/9 to 1973/4, but since then, total factor productivity (TFP) growth has been the main contributor of output growth. While the trend of TFP growth was found to be promising for most industries with positive and increasing technological progress, the negative gains from technical efficiency over time is however cause for concern.

Productivity growth in pre-1990 Mongolian agriculture: Spiralling disaster or emerging success?

The reasons for the spectacular collapse of so many centrally-planned economies are a source of ongoing debate. In this paper, we use detailed farm-level data to measure total factor productivity (TFP) changes in Mongolian grain and potato farming during the 14-year period immediately preceding the 1990 economic reforms. We measure TFP growth using stochastic frontier analysis (SFA) and data envelopment analysis (DEA) methods. Our results indicate quite poor overall performance, with an average annual TFP change of - 1.7% in grain and 0.8% in potatoes, over the 14-year period. However, the pattern of TFP growth changed substantially during this period, with TFP growth exceeding 7% per year in the latter half of this period. This suggests that the new policies of improved education, greater management autonomy, and improved incentives, which were introduced in final two planning periods in the 1980s, were beginning to have a significant influence upon the performance of Mongolian crop farming. Crown Copyright (C) 2002 Published by Elsevier Science B.V. All rights reserved.

Future contributions of crop modelling - from heuristics and supporting decision making to understanding genetic regulation and aiding crop improvement

Crop modelling has evolved over the last 30 or so years in concert with advances in crop physiology, crop ecology and computing technology. Having reached a respectable degree of acceptance, it is appropriate to review briefly the course of developments in crop modelling and to project what might be major contributions of crop modelling in the future. Two major opportunities are envisioned for increased modelling activity in the future. One opportunity is in a continuing central, heuristic role to support scientific investigation, to facilitate decision making by crop managers, and to aid in education. Heuristic activities will also extend to the broader system-level issues of environmental and ecological aspects of crop production. The second opportunity is projected as a prime contributor in understanding and advancing the genetic regulation of plant performance and plant improvement. Physiological dissection and modelling of traits provides an avenue by which crop modelling could contribute to enhancing integration of molecular genetic technologies in crop improvement. Crown Copyright (C) 2002 Published by Elsevier Science B.V. All rights reserved.

Adsorption in slit-like pores of activated carbons: Improvement of the Horvath and Kawazoe method

Anew thermodynamic approach has been developed in this paper to analyze adsorption in slitlike pores. The equilibrium is described by two thermodynamic conditions: the Helmholtz free energy must be minimal, and the grand potential functional at that minimum must be negative. This approach has led to local isotherms that describe adsorption in the form of a single layer or two layers near the pore walls. In narrow pores local isotherms have one step that could be either very sharp but continuous or discontinuous benchlike for a definite range of pore width. The latter reflects a so-called 0 --> 1 monolayer transition. In relatively wide pores, local isotherms have two steps, of which the first step corresponds to the appearance of two layers near the pore walls, while the second step corresponds to the filling of the space between these layers. All features of local isotherms are in agreement with the results obtained from the density functional theory and Monte Carlo simulations. The approach is used for determining pore size distributions of carbon materials. We illustrate this with the benzene adsorption data on activated carbon at 20, 50, and 80 degreesC, argon adsorption on activated carbon Norit ROX at 87.3 K, and nitrogen adsorption on activated carbon Norit R1 at 77.3 K.

Warranty and optimal reliability improvement through product development

For products sold with warranty, the warranty servicing cost can be reduced by improving product reliability through a development process. However, this increases the unit manufacturing cost. Optimal development must achieve a trade-off between these two costs. The outcome of the development process is uncertain and needs to be taken into account in the determination of the optimal development effort. The paper develops a model where this uncertainty is taken into account. (C) 2003 Elsevier Ltd. All rights reserved.

A randomized trial of aggressive lipid reduction for improvement of myocardial ischemia, symptom status, and vascular function in patients with coronary artery disease not amenable to intervention

PURPOSE: To determine the effects of aggressive lipid lowering on markers of ischemia, resistance vessel function, atherosclerotic burden, and Symptom status in patients with symptomatic coronary artery disease. METHODS: Sixty consecutive patients with coronary artery disease that was unsuitable for revascularization were assigned randomly to either usual therapy of lipids for patients with a low-density lipoprotein (LDL) cholesterol target level <116 mg/dL, or to a, more aggressive lipid-lowering strategy involving up to 80 mg/d of atorvastatin, with a target LDL cholesterol level <77 mg/dL. The extent and severity of inducible ischemia (by dobutamine echocardiography), vascular function.(brachial artery reactivity), atheroma burden (carotid intima-media thickness), and symptom status were evaluated blindly at baseline and after 12 weeks of treatment. RESULTS: After 12 weeks of treatment, patients in the aggressive therapy group had a significantly greater decrease in mean (+/- SD) LDL cholesterol level than those in the usual care group (29 +/- 38 mg/dL vs. 7 +/- 24 mg/dL, P = 0.03). Patients in the aggressive therapy group had a reduction in the number of ischemic wall segments (mean between-group difference of 1.3; 95% confidence interval: 0.1 to 2.0; P = 0.04), flow-mediated dilatation (mean between-group difference of 5.9%; 95% confidence interval: 2.5% to 9.4%; P = 0.001), and angina score after 12 weeks. There were no significant changes in atherosclerotic burden in either group. CONCLUSION: Patients with symptomatic coronary artery disease who are treated with aggressive lipid lowering have improvement of symptom status and ischemia that appears to reflect improved vascular function but not atheroma burden. Am J Med. 2003;114:445-453. (C) 2003 by Excerpta Medica Inc.

Gest??o do conhecimento como sistema de gest??o para o setor p??blico

O conhecimento e a gest??o do conhecimento t??m sido focos de uma intensa discuss??o sobre como as organiza????es privadas podem obter vantagens competitivas e atingir elevados patamares de flexibilidade, produtividade e inova????o, sem que, no entanto, esta disciplina seja devidamente debatida e/ou incorporada pelo setor p??blico brasileiro. A partir da perspectiva dos autores de maior prest??gio no assunto, este trabalho apresenta os principais conceitos e aspectos relacionados a este novo paradigma de gest??o organizacional, de modo a identificar quais seriam os principais desafios para a implanta????o de projetos de gest??o do conhecimento no ??mbito da administra????o p??blica. Adicionalmente, este trabalho prop??e a ado????o de um novo modelo de gest??o do conhecimento, mais consistente e adequado ??s organiza????es p??blicas. O modelo de gest??o apresentado prop??e-se a servir como susbs??dio para um debate te??rico e metodol??gico sobre como a gest??o do conhecimento poderia ser incorporada ?? tarefa de buscar melhores n??veis de gest??o para as organiza????es p??blicas brasileiras, de forma a torn??-las mais capacitadas a fazerem frente ??s interfer??ncias que j?? provocaram a fal??ncia das inst??ncias de planejamento e or??amento no setor p??blico, o abandono da padroniza????o e da melhoria dos procedimentos administrativos, a desestrutura????o da fun????o p??blica e das pol??ticas de recursos humanos, a persistente descontinuidade de projetos e de pol??ticas p??blicas, assim como permita resgatar a credibilidade nos mecanismos internos de repress??o e de puni????o ??queles agentes que adotam pr??ticas ou condutas que v??o de encontro aos princ??pios morais e ??s normas jur??dicas estabelecidas.

Gender wage and productivity differentials in the Portuguese tourism industry

The objective of this paper is to provide empirical evidence on the determinants of gender wage inequality in the Portuguese tourism industry. Relying on firm level wage equations and production functions, gender wage and productivity differentials are estimated and then compared in order to infer whether observed gender disparities are justifiable on the grounds that women are relatively less productive than men, or instead disparities are due to gender wage discrimination. This approach is applied to tourism industry data gathered in the matched employer-employee data set Quadros de Pessoal (Employee Records). The main findings indicate that female employees in the tourism industry in Portugal are less productive than their male colleagues and that gender differences in wages are fully explained by gender differences in productivity.

Gender, wages, and productivity: an analysis of the tourism industry in northern Portugal

Tourism represents a major economic activity in Portugal, with an enormous wealth and employment growth potential. A significant proportion of jobs in the industry tourism are occupied by women, given that this industry is characterized by a relatively higher percentage of female employees. Despite the evidence of female progress with regard to their role in the Portuguese labor market, women continue to earn less than their male counterparts. This is clearly the case of the tourism industry, where statistics reveal a persistent gender wage gap. The objective of this paper is to provide empirical evidence on the determinants of gender wage inequality in the tourism industry in northern Portugal. Relying on firm-level wage equations and production functions, gender wage and productivity differentials are estimated and then compared. The comparison of these differentials allows inferring whether observed wage disparities are attributable to relatively lower female productivity, or instead disparities are due to gender wage discrimination. This approach is applied to tourism industry data gathered in the matched employer-employee data set Quadros de Pessoal (Employee Records). The main findings indicate that female employees in the tourism industry in northern Portugal are less productive than their male colleagues and that gender differences in wages are fully explained by gender differences in productivity.

Qualifound – a modular tool developed for quality improvement in foundries

Purpose – Castings defects are usually easy to characterize, but to eradicate them can be a difficult task. In many cases, defects are caused by the combined effect of different factors, whose identification is often difficult. Besides, the real non-quality costs are usually unknown, and even neglected. This paper aims to describe the development of a modular tool for quality improvement in foundries, and its main objective is to present the application potential and the foundry process areas that are covered and taken into account. Design/methodology/approach – The integrated model was conceived as an expert system, designated Qualifound, which performs both qualitative and quantitative analyses. For the qualitative analyses mode, the nomenclature and the description of defects are based on the classification suggested by the International Committee of the Foundry Technical Association. Thus, a database of defects was established, enabling one to associate the defects with the relevant process operations and the identification of their possible causes. The quantitative analysis mode deals with the number of produced and rejected castings and includes the calculation of the non-quality costs. Findings – The validation of Qualifound was carried out in a Portuguese foundry, whose quality system had been certified according to the ISO 9000 standards. Qualifound was used in every management area and it was concluded that the application had the required technological requisites to provide the necessary information for the foundry management to improve process quality. Originality/value – The paper presents a successful application of an informatics tool on quality improvement in foundries.

The estimation of the return on firms’ investments – as to ISO 9001

The aim of this paper was to estimate the return on investment in QMS (quality management systems) certification undertaken in Portuguese firms, according to the ISO 9000 series. A total of 426 certified Portuguese firms were surveyed. The response rate was 61.03 percent. The different payback periods were validated through statistical analysis and the relationship between expected and perceived payback periods was discussed. This study suggests that a firm’s sector of activity, size and degree of internationalization are related to the length of the investment in QMS certification recovery period. Furthermore, our findings suggest, that the time taken to obtain the certification is not directly related to the economic component of the certification. The majority of Portuguese firms (58.9%) took up to three years to recoup their investment and 35.5% of companies said they had not yet recovered the initial investment made. The recoup of investment was measured by the increase in the number of customers and consequent volume of deliveries, improved profitability and productivity of the company, improvement of competitive position and performance (cost savings), reduction in the number of external complaints and internal defects/scrap, achievement of some important clientele, among others. We compared our work to similar studies undertaken in other countries. This paper provides a contribution to the research related to the return on investment for costs related to the certification QMS according to ISO 9000. This paper provides a valuable contribution to the field and is one of the first studies to undertake this type of analysis in Portugal.

Agronomic performance of 27 cocoa progenies and plant selection based on productivity, self-compatibility and disease resistance

The objective of the present work was to evaluate 27 progenies of cocoa crosses considering the agronomic traits and select F1 plants within superior crosses. The experiment was installed in March 2005, in the Experimental Station Joaquim Bahiana (ESJOB), in Itajuipe, Bahia. The area of the experiment is of approximately 3 ha, with a total of 3240 plants. Thirteen evaluations of vegetative brooms, five of cushion brooms and 15 of number of pods per plant were accomplished. Thirty pollinations were made for each selected plant to test for self-compatibility. The production, based on the number of pods per plant, and resistance to witches´ broom indicated CEPEC 94 x CCN 10, RB 39 x CCN 51 and CCN 10 x VB 1151 as superior progenies. All selections tested were self-compatible. The analyses of progenies and individual tree data, associated to visual field observations, allowed the selection of 17 plants which were included in a network of regional tests to determine the phenotypic stability.