Methods for assessment of keel bone damage in poultry

Keel bone damage (KBD) is a critical issue facing the laying hen industry today as a result of the likely pain leading to compromised welfare and the potential for reduced productivity. Recent reports suggest that damage, while highly variable and likely dependent on a host of factors, extends to all systems (including battery cages, furnished cages, and non-cage systems), genetic lines, and management styles. Despite the extent of the problem, the research community remains uncertain as to the causes and influencing factors of KBD. Although progress has been made investigating these factors, the overall effort is hindered by several issues related to the assessment of KBD, including quality and variation in the methods used between research groups. These issues prevent effective comparison of studies, as well as difficulties in identifying the presence of damage leading to poor accuracy and reliability. The current manuscript seeks to resolve these issues by offering precise definitions for types of KBD, reviewing methods for assessment, and providing recommendations that can improve the accuracy and reliability of those assessments.

Everybody's poultry magazine.

Mode of access: Internet.

Oregon's Recorded Livestock and Poultry Brands

Title Varies: Livestock Brand Record

Fattening poultry /

"September 30, 1911."

Directory of U.S. Register of Merit sires and dams qualifying under the National Poultry Improvement Plan, 1942-43 /

"December 1944."

Directory of U.S. Register of Merit sires and dams qualifying under the National Poultry Improvement Plan, 1945-1946 /

Cover title.

Directory of U.S. Register of Merit sires and dams qualifying under the National Poultry Improvement Plan, 1943-44 /

"December 1945."

Matching poultry production with available feed resources: issues and constraints

Corn and soyabeans may not be available in many countries particularly those which do not have sufficient foreign currency or the capacity to grow them. This paper outlines strategies that may be important under these circumstances. Alternative feedstuffs and various feeding systems may be used to support poultry production. Alternative ingredients such as rice bran, pearl millet, cottonseed meal and grain legumes are discussed. Evidence is presented showing that amino acid requirements of layers and broilers may be too generous particularly in countries where climate, management and disease can impose production constraints. The ability of finishing broilers to perform well on very low-energy diets allows the inclusion of alternative feeds and by-products into formulations. Very low protein diets based on cereals and free amino acids can be used for layers without loss of performance. Self-selection of feedstuffs may be an important strategy in reducing feed costs of broilers and layers. The concept of matching production with available feed resources may compromise broiler growth and egg production, but in many countries this may be the most economical choice. Countries in the humid tropics usually have reduced poultry performance. The effects of high temperature and humidity are difficult to overcome. The vexed questions of the escalation in the price of fossil fuel and the outbreak of avian influenza, both seemingly without a solution, are clouds hanging over an otherwise buoyant industry.

Optimum inclusion of field peas, faba beans, chick peas and sweet lupins in poultry diets. II. Broiler experiments

1. Three experiments were undertaken to determine the optimum inclusion rates of held peas, faba beans, chick peas and sweet lupins in broiler starter and finisher diets in amounts up to 360 g/kg. 2. In experiment A chickens in cages grown to 21 d on diets with field peas and faba beans gave better growth rate and feed efficiency than those with sweet lupins and chick peas. Growth rate and Food conversion ratio (FCR) improved with increasing amounts of faba beans in the diet while for chick peas growth rate and FCR declined. Digesta viscosity and excreta stickiness scores were much higher on diets with sweet lupins. Steam pelleting improved growth rate and FCR on all diets. 3. In experiment B birds were in cages and grown from 21 to 42 d. There were no differences between grain legumes (when combined for all inclusions) for growth rate, food intake or FCR. Viscosity was again much higher on the sweet lupin-based diets while the pancreas was significantly enlarged on the diets with chick peas, as observed previously in chickens grown to 21 d. Steam pelleting of diets gave a consistent and positive response for weight gain and FCR. 4. Experiment C was carried out in pens each holding 60 birds under semi-commercial conditions and grown to 4 2 d on starter and finisher diets with the same grain legumes as used previously but each at 2 rates of inclusion similar to those in commercial practice. Field peas at 200 to 300 g/kg and chick peas at 150 to 220 g/kg gave inferior growth to faba beans (150 to 180 g/kg) and sweet lupins (120 g/kg). 5. The results of these experiments allowed tentative recommendations to be made to industry for inclusion rates of these cultivars of the 4 grain legumes. These were: field peas 300 g/kg; faba beans 200 g/kg, chick peas 100 g/kg and sweet lupins

Serosurvey of selected avian pathogens in brazilian commercial Rheas (Rhea americana) and Ostriches (Struthio camelus)

Ratite farming of has expanded worldwide. Due to the intensive farming methods used by ratite producers, preventive medicine practices should be established. In this context, the surveillance and control of some avian pathogens are essential for the success of the ratite industry; however, little is known on the health status of ratites in Brazil. Therefore, the prevalence of antibodies against Newcastle Disease virus, Chlamydophila psittaci, Mycoplasma gallisepticum, Mycoplasma synoviae, and Salmonella Pullorum were evaluated in 100 serum samples collected from commercial ostriches and in 80 serum samples from commercial rheas reared in Brazil. All sampled animals were clinically healthy. The results showed that all ostriches and rheas were serologically negative to Newcastle disease virus, Chlamydophila psittaci, Mycoplasma gallisepticum, and Mycoplasma synoviae. Positive antibody responses against Salmonella Pullorum antigen were not detected in ostrich sera, but were detected in two rhea serum samples. These results can be considered as a warning as to the presence of Salmonella spp. in ratite farms. Therefore, the implementation of good health management and surveillance programs in ratite farms may contribute to improve not only animal production, but also public health conditions.

Vectorial Competence of Larvae and Adults of Alphitobius diaperinus in the Transmission of Salmonella Enteritidis in Poultry

Introduction: The ingestion of food products originating from poultry infected with Salmonella spp. is one of the major causes of food poisoning in humans. The control of poultry salmonellosis is particularly difficult since birds are asymptomatic and numerous factors may expedite the maintenance of bacteria in poultry production facilities. Objective: The aim of the study was to determine the vectorial capacity of adults and larvae of Alphitobius diaperinus (Coleoptera: Tenebrionidae) in the experimental transmission of Salmonella Enteritidis phage type 4 to 1-day-old specific pathogen-free White Leghorn chicks. Methods: Adult insects and larvae were starved for 1 day, fed for 24 h or 7 days on sterile ration that had been treated with Salmonella Enteritidis phage type 4, and the levels of bacterial infection were determined. Infected adult insects and larvae were fed to groups of day-old chicks, after which bacteria were recovered from cecum, liver, and spleen samples over a 7-day period. Results: Infected larvae were more efficient than adult insects in transmitting Salmonella Enteritidis to chicks. Higher concentrations of bacteria could be reisolated from the cecum, liver, and spleen of chicks that had ingested infected larvae compared with those that had ingested infected adults. Conclusions: The control of A. diaperinus, and particularly of the larvae, represents a critical factor in the reduction of Salmonella spp. in poultry farms.

Combined photocatalytic and fungal processes for the treatment of nitrocellulose industry wastewater

The objective of this work was to characterize the delignification effluent originating from the delignification industry and evaluate the combination of the fungus and photocatalytic process (TiO(2)/UV system) for the treatment of this effluent. The delignification effluent has proven harmful to the environment because it presents high color (3516 CU), total phenol (876 mg/L and TOC (1599 mg/L) and is also highly toxic even in a low concentration. The results of photocatalysis were 11%, 25% and 13% higher for reductions in color, total phenol and TOC, respectively. The combined treatments presented benefits when compared to the non-combined treatments. Fungus and photocatalysis in combination proved to be the best treatment, reducing the color, total phenol, toxicity (inhibition of Escherichia coli growth) and TOC by 94.2%, 92.6%, 4.9% and 62%, respectively. (C) 2008 Elsevier B.V. All rights reserved.

AnSBBR Applied to a Personal Care Industry Wastewater Treatment: Effects of Fill Time, Volume Treated Per Cycle, and Organic Load

A study was performed regarding the effect of the relation between fill time, volume treated per cycle, and influent concentration at different applied organic loadings on the stability and efficiency of an anaerobic sequencing batch reactor containing immobilized biomass on polyurethane foam with recirculation of the liquid phase (AnSBBR) applied to the treatment of wastewater from a personal care industry. Total cycle length of the reactor was 8 h (480 min). Fill times were 10 min in the batch operation, 4 h in the fed-batch operation, and a 10-min batch followed by a 4-h fed batch in the mixed operation. Settling time was not necessary since the biomass was immobilized and decant time was 10 min. Volume of liquid medium in the reactor was 2.5 L, whereas volume treated per cycle ranged from 0.88 to 2.5 L in accordance with fill time. Influent concentration varied from 300 to 1,425 mg COD/L, resulting in an applied volumetric organic load of 0.9 and 1.5 g COD/L.d. Recirculation flow rate was 20 L/h, and the reactor was maintained at 30 A degrees C. Values of organic matter removal efficiency of filtered effluent samples were below 71% in the batch operations and above 74% in the operations of fed batch followed by batch. Feeding wastewater during part of the operational cycle was beneficial to the system, as it resulted in indirect control over the conversion of substrate into intermediates that would negatively interfere with the biochemical reactions regarding the degradation of organic matter. As a result, the average substrate consumption increased, leading to higher organic removal efficiencies in the fed-batch operations.

Anaerobic sequencing batch biofilm reactor applied to automobile industry wastewater treatment: Volumetric loading rate and feed strategy effects

This paper presents a technological viability study of wastewater treatment in an automobile industry by an anaerobic sequencing batch biofilm reactor containing immobilized biomass (AnSBBR) with a draft tube. The reactor was operated in 8-h cycles, with agitation of 400 rpm, at 30 degrees C and treating 2.0 L wastewater per cycle. Initially the efficiency and stability of the reactor were studied when supplied with nutrients and alkalinity. Removal efficiency of 88% was obtained at volumetric loading rate (VLR) of 3.09 mg COD/L day. When VLR was increased to 6.19 mg COD/L day the system presented stable operation with reduction in efficiency of 71%. In a second stage the AnSBBR was operated treating wastewater in natura, i.e., without nutrients supplementation, only with alkalinity, thereby changing feed strategy. The first strategy consisted in feeding 2.0 L batch wise (10 min), the second in feeding 1.0 L of influent batch wise (10 min) and an additional 1.0 L fed-batch wise (4 h), both dewatering 2.0 L of the effluent in 10 min. The third one maintained 1.0 L of treated effluent in the reactor, without discharging, and 1.0 L of influent was fed fed-batch wise (4 h) with dewatering 1.0 L of the effluent in 10 min. For all implemented strategies (VLR of 1.40, 2.57 and 2.61 mg COD/L day) the system presented stability and removal efficiency of approximately 80%. These results show that the AnSBBR presents operational flexibility, as the influent can be fed according to industry availability. In industrial processes this is a considerable advantage, as the influent may be prone to variations. Moreover, for all the investigated conditions the kinetic parameters were obtained from fitting a first-order model to the profiles of organic matter, total volatile acids and methane concentrations. Analysis of the kinetic parameters showed that the best strategy is feeding 1.0 L of influent batchwise (10 min) and 1.0 L fed-batch wise (4 h) in 8-h cycle. (c) 2007 Elsevier B.V. All rights reserved.