Avaliação dos efeitos tóxicos in vitro e in vivo do extrato hidroetanólico dos frutos de Genipa americana L. (Rubiaceae) em camundongos Swiss

The therapeutic use of medicinal plants has contributed since antiquity in a beneficial way for health. However, many species lacks of scientific evidence which provide basis for their use in therapeutic practice. In this context is the Genipa americana L. species (Rubiaceae), popularly known as jenipapo and used to treat syfilis, ulcer and hemorrhagic disturbs. It's also used against bruising, as tonic and as aphrodisiac. Due this species lacks toxicological studies, the aim of this study was to evaluate the toxicity in vivo (acute and sub-chronic toxicity) and in vitro (cytotoxicity) of the hydroethanolic extract from G. americana fruits. The hydroethanolic extract of G. americana fruits was prepared by maceration. A preliminary phytochemical analysis was performed to assess the presence of secondary metabolites in the extract. The cytotoxicity study of the extract (0.1, 1.0, 10, 100 and 1000 mg / 100 ul) were performed against normal cells (3T3) and tumor (786-0, HepG2 and B16), analyzed by the MTT assay. To evaluate the acute (single dose of 2000 mg / Kg) and subchronic (100, 500 and 1000 mg / kg for 30 days) toxicity Swiss mice of both sexes were used. At the end of the experiment, blood samples and organs were collected for analysis. Data between groups were compared by t test or ANOVA with Dunnett's post-test with 5% significance level. The phytochemical study of the extracts mainly indicated the presence of iridoids. Results for cytotoxicity tests showed up to 70% inhibition of B16 cell line at a dose of 1000 mg / 100 ul, and up to 29% inhibition of 786-0 at a dose of 10 ug / 100 ul. The extract did not cause death in 3T3 and HepG2 cells. During the in vivo assays, there were no animal deaths. Analysis of blood samples revealed that the animals submitted to the evaluation of acute toxicity had changes in AST and ALT, and that the animals evaluated for subchronic toxicity showed changes in the relative wet weight of the kidney and plasma urea concentration. No differences were observed between groups on histopathological evaluation of the collected organs. Despite the changes found in the in vivo toxicity tests, using the criteria described by the OECD Guidelines, it is suggested that the hydroethanolic extract of the fruits of the G. americana is classified as low toxicity. The cytotoxicity of the extract suggests that they have potential against melanoma cell lines (B16).

Avaliação dos efeitos tóxicos in vitro e in vivo do extrato hidroetanólico dos frutos de Genipa americana L. (Rubiaceae) em camundongos Swiss

The therapeutic use of medicinal plants has contributed since antiquity in a beneficial way for health. However, many species lacks of scientific evidence which provide basis for their use in therapeutic practice. In this context is the Genipa americana L. species (Rubiaceae), popularly known as jenipapo and used to treat syfilis, ulcer and hemorrhagic disturbs. It's also used against bruising, as tonic and as aphrodisiac. Due this species lacks toxicological studies, the aim of this study was to evaluate the toxicity in vivo (acute and sub-chronic toxicity) and in vitro (cytotoxicity) of the hydroethanolic extract from G. americana fruits. The hydroethanolic extract of G. americana fruits was prepared by maceration. A preliminary phytochemical analysis was performed to assess the presence of secondary metabolites in the extract. The cytotoxicity study of the extract (0.1, 1.0, 10, 100 and 1000 mg / 100 ul) were performed against normal cells (3T3) and tumor (786-0, HepG2 and B16), analyzed by the MTT assay. To evaluate the acute (single dose of 2000 mg / Kg) and subchronic (100, 500 and 1000 mg / kg for 30 days) toxicity Swiss mice of both sexes were used. At the end of the experiment, blood samples and organs were collected for analysis. Data between groups were compared by t test or ANOVA with Dunnett's post-test with 5% significance level. The phytochemical study of the extracts mainly indicated the presence of iridoids. Results for cytotoxicity tests showed up to 70% inhibition of B16 cell line at a dose of 1000 mg / 100 ul, and up to 29% inhibition of 786-0 at a dose of 10 ug / 100 ul. The extract did not cause death in 3T3 and HepG2 cells. During the in vivo assays, there were no animal deaths. Analysis of blood samples revealed that the animals submitted to the evaluation of acute toxicity had changes in AST and ALT, and that the animals evaluated for subchronic toxicity showed changes in the relative wet weight of the kidney and plasma urea concentration. No differences were observed between groups on histopathological evaluation of the collected organs. Despite the changes found in the in vivo toxicity tests, using the criteria described by the OECD Guidelines, it is suggested that the hydroethanolic extract of the fruits of the G. americana is classified as low toxicity. The cytotoxicity of the extract suggests that they have potential against melanoma cell lines (B16).

Estudo comparativo dos processos eletroquímicos oxidativos avançados (PEOAs) no tratamento de efluentes contendo corantes orgânicos de difícil degradação

Organic dyes have been widely used in various branches of dyeing industries. These compounds are known to be very toxic, mutagenic, cancinogenic only cause aesthetic pollution and irreversible damage to aquatic ecosystems and human health. Are recalcitrant contaminants due to its high stability and resistance to photobleaching and bio. Given this context, the search for technologies that can minimize the effects of such pollutants is required. In recent decades the Electrochemical Oxidation Process Advanced (PEOAs) based on the generation of strongly oxidizing species (radicals ●OH) offer promising approaches for the prevention of problems caused by industrial effluents. This study analyzed the degradation and mineralization of textile dyes and the study of a real effluent in order to assess the feasibility of PEOAs: Electro-Fenton (EF), Photo Electro-Fenton (PEF) and anodic oxidation (AO), and these methods still was studied the Solar Fotoelectro-Fenton (SPEF) in a pre-pilot plant, in order to study the electrochemical treatment on an industrial scale. In the study has compared the effect of PEOAs in the removal of color, TOC and decay kinetics of degradation of the compounds, and also for using the Congo Red (CR) SPEF studies were performed mineralization current efficiency (MCE). The best results are given to the treatment of the PEF for all the studied dyes. From the results it was possible to choose the PEF as the most effective and promising for application of treatment when compared to other methods of treatment, and prove from SPEF that the process can be used in industrial scales, since this method PEF has been improved and solar irradiation replaced the UVA lamp.

Estudo comparativo dos processos eletroquímicos oxidativos avançados (PEOAs) no tratamento de efluentes contendo corantes orgânicos de difícil degradação

Organic dyes have been widely used in various branches of dyeing industries. These compounds are known to be very toxic, mutagenic, cancinogenic only cause aesthetic pollution and irreversible damage to aquatic ecosystems and human health. Are recalcitrant contaminants due to its high stability and resistance to photobleaching and bio. Given this context, the search for technologies that can minimize the effects of such pollutants is required. In recent decades the Electrochemical Oxidation Process Advanced (PEOAs) based on the generation of strongly oxidizing species (radicals ●OH) offer promising approaches for the prevention of problems caused by industrial effluents. This study analyzed the degradation and mineralization of textile dyes and the study of a real effluent in order to assess the feasibility of PEOAs: Electro-Fenton (EF), Photo Electro-Fenton (PEF) and anodic oxidation (AO), and these methods still was studied the Solar Fotoelectro-Fenton (SPEF) in a pre-pilot plant, in order to study the electrochemical treatment on an industrial scale. In the study has compared the effect of PEOAs in the removal of color, TOC and decay kinetics of degradation of the compounds, and also for using the Congo Red (CR) SPEF studies were performed mineralization current efficiency (MCE). The best results are given to the treatment of the PEF for all the studied dyes. From the results it was possible to choose the PEF as the most effective and promising for application of treatment when compared to other methods of treatment, and prove from SPEF that the process can be used in industrial scales, since this method PEF has been improved and solar irradiation replaced the UVA lamp.

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.

Um problema de dispersão de poluentes em rios e canais por meio do método de separação de variáveis

Neste trabalho obtém-se uma solução analítica para a equação de advecção-difusão aplicada a problemas de dispersão de poluentes em rios e canais. Para tanto, consideram-se os casos unidimensionais e bidimensionais em regime transiente com coeficientes de difusividade e velocidades constantes. A abordagem utilizada para a resolução deste problema é o método de Separação de Variáveis. Os modelos resolvidos foram simulados utilizando o MatLab. Apresentam-se os resultados das simulações numéricas em formato gráfico. Os resultados de algumas simulações numéricas existem na literatura e puderam ser comparados. O modelo proposto mostrou-se coerente em relação aos dados considerados. Para outras simulações não foram encontrados comparativos na literatura, todavia esses problemas governados por equações diferenciais parciais, mesmo lineares, não são de fácil solução analítica. Sendo que, muitas delas representam importantes problemas de matemática e física, com diversas aplicações na engenharia. Dessa forma, é de grande importância a disponibilidade de um maior número de problemas-teste para avaliação de desempenho de formulações numéricas, cada vez mais eficazes, já que soluções analíticas oferecem uma base mais segura para comparação de resultados.

Estudo numérico do impacto das emissões veiculares e fixas da cidade de Manaus nas concentrações de poluentes atmosféricos da região amazônica

The main aim of this study was to evaluate the impact of the urban pollution plume from the city of Manaus by emissions from mobile and stationary sources in the atmospheric pollutants concentrations of the Amazon region, by using The Weather Research and Forecasting with Chemistry (WRF-Chem) model. The air pollutants analyzed were CO, NOx, SO2, O3, PM2.5, PM10 and VOCs. The model simulations have been configured with a grid spacing of 3 km, with 190 x and 136 y grid points in horizontal spacing, centered in the city of Manaus during the period of 17 and 18 of March 2014. The anthropogenic emissions inventories have gathered from mobile sources that were estimated the emissions of light and heavy-duty vehicles classes. In addition, the stationary sources have considered the thermal power plants by the type of energy sources used in the region as well as the emissions from the refinery located in Manaus. Various scenarios have been defined with numerical experiments that considered only emissions by biogenic, mobile and stationary sources, and replacement fuel from thermal power plant, along with a future scenario consisting with twice as much anthropogenic emissions. A qualitative assessment of simulation with base scenario has also been carried out, which represents the conditions of the region in its current state, where several statistical methods were used in order to compare the results of air pollutants and meteorological fields with observed ground-based data located in various points in the study grid. The qualitative analysis showed that the model represents satisfactorily the variables analyzed from the point of view of the adopted parameters. Regarding the simulations, defined from the base scenarios, the numerical experiments indicate relevant results such as: it was found that the stationary sources scenario, where the thermal power plants are predominant, resulted in the highest concentrations, for all air pollutants evaluated, except for carbon monoxide when compared to the vehicle emissions scenario; The replacement of the energy matrix of current thermal power plants for natural gas have showed significant reductions in pollutants analyzed, for instance, 63% reductions of NOx in the contribution of average concentration in the study grid; A significant increase in the concentrations of chemical species was observed in a futuristic scenario, reaching up to a 81% increase in peak concentrations of SO2 in the study area. The spatial distributions of the scenarios have showed that the air pollution plume from Manaus is predominantly west and southwest, where it can reach hundreds of kilometers to areas dominated by original soil covering.

Redução do Impacto Ambiental de Poluentes Orgânicos Persistentes

Nos dias de hoje a contaminação dos solos e águas subterrâneas com pesticidas através da agricultura tornou-se um problema. Problema este, considerado ainda maior nas áreas onde o abastecimento de água potável é quase totalmente à base de água subterrânea, causando deste modo risco para a saúde humana devido à exposição directa de possíveis resíduos de pesticidas na água potável. É certo que a persistência dos pesticidas no solo é importante para obter um bom controlo sob as ervas daninhas durante a sua época de crescimento, contudo o uso desses pesticidas contamina não só o solo como as águas superficiais. As questões acerca do uso de pesticidas na actualidade continuarão a persistir, uma vez que existem muitos factores e características inerentes a este processo que necessitam de ser abordadas e mais importante que isso estudadas, como por exemplo a sua degradação e toxicidade. Neste trabalho efectuou-se o encapsulamento de pesticidas em moléculas de β – ciclodextrina (β-CD). O que se pretende com este encapsulamento, é aumentar a hidrofilicidade do pesticida de forma a garantir que este persista o tempo suficiente permitindo um bom controlo das ervas daninhas, tendo sempre em conta as preocupações inerentes ao uso dos pesticidas, como por exemplo a dificuldade de biodegradação. O estudo centrou-se em torno de dois dos pesticidas mais utilizados em Portugal: MCPA e Bentazona. Estes herbicidas foram encapsulados individualmente na β-CD formando assim complexos, mais solúveis e eventualmente mais estáveis quimicamente garantindo uma redução dos efeitos dos pesticidas no meio ambiente. Este estudo foi dividido essencialmente em duas partes: a síntese e caracterização dos complexos pesticida-β-CD e posteriormente a avaliação da estabilidade química em solução aquosa e da solubilidade dos complexos formados. A utilização de diversas técnicas analíticas nomeadamente DSC, FTIR, Espectrofotometria de UV, HPLC e Electroquímica permitiram concluir que o pesticida MCPA encapsula pela acção da β-CD aquando do complexo formado em solução etanólica e numa proporção estequiométrica MCPA:β-CD de 1:2 respectivamente. Obteve-se para as várias soluções estudadas, todas elas com concentrações diferentes de β-CD, uma constante de estabilidade de 102,4. No caso da Bentazona, os resultados preliminares obtidos indiciam claramente a formação de um complexo com a β-CD para o complexo formado em solução etanólica.

Caraterização in vitro dos efeitos tóxicos da patulina na integridade do epitélio intestinal e potenciais efeitos protetores da cisteína

A mucosa intestinal é a primeira barreira biológica encontrada pelas micotoxinas presentes nos alimentos, sendo a patulina, uma micotoxina produzida por fungos do género Penicillium spp., uma preocupação particular atendendo a que a exposição humana a esta micotoxina pode conduzir a efeitos imunológicos, neurológicos e gastrointestinais. Considerando estes efeitos para a saúde, o presente estudo tem como objetivos a avaliação do efeito tóxico da exposição intestinal a patulina, bem como a determinação do potencial efeito protetor da coadministração de patulina e cisteína na membrana intestinal, utilizando para o efeito células Caco-2. A integridade da membrana intestinal foi determinada pela medição da resistência elétrica transepitelial (TEER). Os resultados evidenciaram um decréscimo acentuado nos valores de TEER após 24 horas de exposição celular a 95 μM de patulina. Para as concentrações mais reduzidas verificou-se uma redução máxima inferior a 25% após 24 horas de exposição. A coadministração de patulina (95 μM) e cisteína (40 μM) revelou um decréscimo nos valores de TEER. O tratamento com cisteína em concentrações superiores ( 400 μM) revelou efeito protetor da membrana intestinal, tendo em conta os valores de TEER. Estes resultados contribuem para uma avaliação do risco mais precisa associada à exposição a contaminantes alimentares.

A importância do uso de métodos complementares para a avaliação da toxicidade de hidrocarbonetos aromáticos policíclicos

Hidrocarbonetos Aromáticos Policíclicos (HAPs) e seus derivados Halogenados (HHAPs) são conhecidos como um conjunto de contaminantes ambientais, classificados como potencialmente tóxicos, mutagénicos e carcinogénicos, sendo um assunto de extrema importância e preocupação para a saúde pública. Diversos estudos têm reportado o potencial efeito tóxico destes compostos após longos períodos de exposição, pelo uso de métodos colorimétricos como o ensaio de brometo de 3-[4,5- dimetil-tiazol-2-il]-2,5-difeniltetrazólio (MTT) e vermelho neutro. Contudo, apesar de estes métodos clássicos de avaliação da citotoxicidade in vitro permitirem, de forma rápida, identificar as propriedades nocivas dos compostos, não permitem compreender os mecanismos moleculares subjacentes responsáveis pela sua toxicidade. Deste modo, no presente estudo, para avaliar os efeitos à exposição aos compostos Pireno (Pir) e seu derivado resultante da desinfeção de águas por bromação, 1-BromoPireno (1-BrPir), foram utilizados outros métodos complementares como avaliação do stress oxidativo e vários fenómenos associados à morte celular programada. Os resultados obtidos comprovam não só a existência de efeitos citotóxicos dos poluentes quando acumulados, como também possíveis efeitos genotóxicos. Assim, pelos métodos complementares, foi possível a identificação de alvos moleculares passiveis de ação farmacológica, o que pode constituir o primeiro passo para o desenho de estratégias terapêuticas que visem prevenir ou tratar os danos provocados por estes poluentes no Homem.

Avaliação do potencial da macrófita Pistia stratiotes na exposição de íon cromo (VI): biossorção e tolerância

The environmental pollution caused by industries has increased the concentration of pollutants in the environment, especially in water. Among the most diverse contaminants, there is the metals, who may or may not to be heavy/toxic, causing effluent of difficult treatment when in low concentrations. The search for alternative measures of wastewater effluent treatment has led to studies using phytoremediation technique through the various matrices (plant, fungi, bacteria) as means of polishing treatment to remove contaminants by means of biosorption/bioaccumulation. In order to use the phytoremediation technique for removing metals of the environmental, it have been performed bioassay with the macrophyte Pistia stratiotes. The bioassays were realized with healthy plants of P. stratiotes acclimatized in a greenhouse, at room temperature and lighting conditions during 28 days of cultivate. The cultivations were performed in glass vessels containing 1 L of the hydroponic solution with chromium (VI) in the potassium dichromate form with concentration range 0.10 to 4.90 mg L-1. The experiments were performed by Outlining Central Composite Rotational (OCCR), where the kinetics of bioaccumulation and chlorophyll a fluorescence were monitored in plants of P. stratiotes during cultivation. The collections of the samples and cultive solution were performed according to the OCCR. The chromium levels were measured in samples of P. stratiotes and the remaining solutions by the methodology of atomic absorption spectrometry by flame. The tolerance of P. stratiotes in relation to exposure to chromium (VI) was analyzed by parameters of physiological activity by means of chlorophyll a fluorescence, using the portable fluorometer PAM (Pulse Amplitude Modulation). The development of P. stratiots and their biomass were related to the time factor, while bioaccumulation capacities were strongly influenced by factors of time and chromium concentration (VI). The chlorophyll fluorescence parameters were affected by chromium and the exposure time at the bioassays. It was obtained an higher metal removal from the root in relation to the sheet, reaching a high rate of metal removal in solution. The experimental data removal kinetics were represented by kinetic models Irreversibly Langmuir, Reversible Langmuir, Pseudo-first Order and Pseudo-second Order, and the best fit for the culture solution was the Reversible Langmuir model with R² 0.993 and for the plant the best model was Pseudo-second order with R² 0.760.

Efeitos tóxicos induzidos pelos nanomateriais Fulereno (C60) e Nanoprata no Poliqueto Laeonereis Acuta (Nereididae) e nas comunidades bacterianas que habitam sua superfície corporal

O fulereno (C60) pertence a uma família de nanomateriais (NM) constituída exclusivamente de átomos de carbono, sendo encontrado na forma de suspensão na água (nC60). A nanoprata (nAg) possui um excepcional e amplo espectro bactericida e um custo de fabricação relativamente baixo. No entanto, pouco se sabe a respeito dos eventuais efeitos tóxicos induzidos por estes NM em organismos estuarinos. O poliqueto Laeonereis acuta tem o muco colonizado por comunidades bacterianas. Há registros de que L. acuta apresenta um gradiente corporal para concentração de EAO e capacidade antioxidante total. Neste estudo, os poliquetos foram expostos in vivo durante 24 horas ao nC60 e à nAg, separadamente. Após isso, as unidades formadoras de colônias (UFC) bacterianas foram contadas e pesadas, além de serem realizadas diversas medições bioquímicas nos poliquetos e nas bactérias. Os números de UFC bacterianas expostas ao nC60 foi menor na concentração de 0.01mg/L e os números de UFC bacterianas expostas à nAg foram similares aos dados de biomassa, diminuindo na maior concentração (1.0 mg/L) (p<0.05). A capacidade antioxidante contra radicais peroxil em homogeneizados bacterianos expostos ao nC60 foi menor na concentração de 0.1mg/L quando comparado ao controle (p<0.05). A região anterior apresentou menor capacidade antioxidante (p<0.05) nos poliquetos expostos a 1.0 mg/L, quando comparado ao controle. Os poliquetos expostos à nAg apresentaram menor capacidade antioxidante na região posterior na concentração de 1.0 mg/L quando comparado ao controle (p<0.05). O conteúdo de peróxidos lipídicos (TBARS) foi reduzido na região anterior dos poliquetos expostos nas duas menores concentrações ( 0.01 e 0.1 mg/L) de nC60 (p<0.05). Na região corporal posterior, somente os organismos expostos a maior concentração de nC60 (1.0 mg/L) mostraram aumento na concentração de TBARS quando comparado ao grupo controle (p<0.05). A atividade da enzima glutationa-Stransferase (GST) foi aumentada (p<0.05) na região média e posterior dos poliquetos expostos a 0.1 mg/L de nC60. Como conclusões pode se dizer que os dois NM induziram efeitos tóxicos ainda numa situação (escuridão) onde o fulereno não é fotoexcitado. O aumento na produção e comercialização de produtos com NM levanta a questão dos riscos ambientais associados ao desenvolvimento da nanotecnologia.