Réponse métabolique du saumon Atlantique (Salmo salar) aux fluctuations journalières de température : rôles de la température d’acclimatation et de l’historique thermique

En général, le métabolisme des poissons est estimé à des valeurs de température constantes, mais les effets de fluctuations journalières de température similaires à celles retrouvées en milieu naturel semblent peu connus. Les objectifs du présent mémoire sont de quantifier les effets de la température moyenne d’acclimatation et d’évaluer les effets de l’historique thermique des individus, sur les réponses métaboliques de tacons de saumon Atlantique (Salmo salar) aux fluctuations journalières de la température. Des tacons provenant de deux rivières, une fraîche et une chaude, ont été acclimatés à un maximum de quatre régimes thermiques (constant 15 °C ou 20 °C, fluctuant 15 °C ± 2.5 °C ou 20 °C ± 2.5 °C) et leur taux métabolique standard estimés par respirométrie par débit-intermittent. Les fluctuations journalières de température (15 °C ± 2.5 °C) près de l’optimum thermique pour cette espèce (16 °C) n’affectent pas le taux métabolique standard. À l’opposé, les fluctuations journalières de température plus chaudes (20 °C ± 2.5 °C) augmentent de 35.4% le taux métabolique standard des tacons de la rivière plus chaude, mais pas ceux des poissons de la rivière fraîche. Ainsi, la température moyenne à laquelle sont acclimatés les poissons peut affecter leur réponse métabolique aux fluctuations journalières de température, mais cette réponse peut varier entre populations provenant de rivières présentant des régimes thermiques différents. Enfin, grâce aux données de métabolisme précédemment estimées, un modèle de métabolisme standard a été développé pour des tacons de saumon Atlantique soumis à des fluctuations journalières de température.

Entre la gobernanza social e institucional: Una mirada al fenómeno de la trata de personas en Colombia en el período entre 2000 y 2012

La presente monografía tiene por objetivo identificar la influencia de las acciones emprendidas por la sociedad civil y las organizaciones internacionales frente a la problemática de la trata de personas en Colombia, durante el período comprendido entre los años 2000 y 2012. En este sentido, la investigación constituye un esfuerzo por develar las transformaciones en las narrativas institucionales que han posibilitado el reconocimiento de los elementos de prevención y centralidad de las víctimas, como ejes articuladores del discurso gubernamental frente a la trata de personas. Para ello, se hace uso de la teoría de la gobernanza global enmarcada en el enfoque constructivista de las Relaciones Internacionales, en tanto permite establecer una relación entre las acciones de los diferentes actores y el impacto de estas en la construcción de estrategias nacionales para hacer frente a problemáticas que, como la trata de personas, se encuentran en estrecha relación con el mundo globalizado.

El proceso de desinternamiento de j??venes ex tutelados para favorecer una inserci??n sociolaboral positiva : an??lisis de la situaci??n actual en los centros residenciales de acci??n educativa de Catalu??a

Resumen tomado de la publicaci??n

Aproximaci??n conceptual e identificaci??n de predictores de riesgo te??ricos en j??venes conductores : un punto de partida para contribuir en la reducci??n de accidentes de tr??fico

Resumen basado en el de la publicaci??n

Basis set superposition error-counterpoise corrected potential energy surfaces : application to hydrogen peroxide ... X (X=F-, Cl-, Br-, Li+, Na+) complexes

Møller-Plesset (MP2) and Becke-3-Lee-Yang-Parr (B3LYP) calculations have been used to compare the geometrical parameters, hydrogen-bonding properties, vibrational frequencies and relative energies for several X- and X+ hydrogen peroxide complexes. The geometries and interaction energies were corrected for the basis set superposition error (BSSE) in all the complexes (1-5), using the full counterpoise method, yielding small BSSE values for the 6-311 + G(3df,2p) basis set used. The interaction energies calculated ranged from medium to strong hydrogen-bonding systems (1-3) and strong electrostatic interactions (4 and 5). The molecular interactions have been characterized using the atoms in molecules theory (AIM), and by the analysis of the vibrational frequencies. The minima on the BSSE-counterpoise corrected potential-energy surface (PES) have been determined as described by S. Simón, M. Duran, and J. J. Dannenberg, and the results were compared with the uncorrected PES

Supplementation with fruit and vegetable soups and beverages increases plasma carotenoid concentrations but does not alter markers of oxidative stress or cardiovascular risk factors

This study was aimed at determining whether an increase of 5 portions of fruits and vegetables in the form of soups and beverages has a beneficial effect on markers of oxidative stress and cardiovascular disease risk factors. The study was a single blind, randomized, controlled, crossover dietary intervention study. After a 2-wk run-in period with fish oil supplementation, which continued throughout the dietary intervention to increase oxidative stress, the volunteers consumed carotenoid-rich or control vegetable soups and beverages for 4 wk. After a 10-wk wash-out period, the volunteers repeated the above protocol, consuming the other intervention foods. Both test and control interventions significantly increased the % energy from carbohydrates and decreased dietary protein and vitamin B-12 intakes. Compared with the control treatment, consumption of the carotenoid-rich soups and beverages increased dietary carotenoids, vitamin C, alpha-tocopherol, potassium, and folate, and the plasma concentrations of alpha-carotene (362%), beta-carotene (250%) and lycopene (31%) (P < 0.01) and decreased the plasma homocysteine concentration by 8.8% (P < 0.01). The reduction in plasma homocysteine correlated weakly with the increase in dietary folate during the test intervention (r = -0.35, P = 0.04). The plasma antioxidant status and markers of oxidative stress were not affected by treatment. Consumption of fruit and vegetable soups and beverages makes a useful contribution to meeting dietary recommendations for fruit and vegetable consumption.

Moving the nanoscience and technology (NST) debate forwards: short-term impacts, long-term uncertainty and the social constitution

Nanoscience and technology (NST) are widely cited to be the defining technology for the 21st century. In recent years, the debate surrounding NST has become increasingly public, with much of this interest stemming from two radically opposing long-term visions of a NST-enabled future: ‘nano-optimism’ and ‘nano-pessimism’. This paper demonstrates that NST is a complex and wide-ranging discipline, the future of which is characterised by uncertainty. It argues that consideration of the present-day issues surrounding NST is essential if the public debate is to move forwards. In particular, the social constitution of an emerging technology is crucial if any meaningful discussion surrounding costs and benefits is to be realised. An exploration of the social constitution of NST raises a number of issues, of which unintended consequences and the interests of those who own and control new technologies are highlighted.

Advanced functionality for radio analysis in the Offline software framework of the Pierre Auger Observatory

The advent of the Auger Engineering Radio Array (AERA) necessitates the development of a powerful framework for the analysis of radio measurements of cosmic ray air showers. As AERA performs ""radio-hybrid"" measurements of air shower radio emission in coincidence with the surface particle detectors and fluorescence telescopes of the Pierre Auger Observatory, the radio analysis functionality had to be incorporated in the existing hybrid analysis solutions for fluorescence and surface detector data. This goal has been achieved in a natural way by extending the existing Auger Offline software framework with radio functionality. In this article, we lay out the design, highlights and features of the radio extension implemented in the Auger Offline framework. Its functionality has achieved a high degree of sophistication and offers advanced features such as vectorial reconstruction of the electric field, advanced signal processing algorithms, a transparent and efficient handling of FFTs, a very detailed simulation of detector effects, and the read-in of multiple data formats including data from various radio simulation codes. The source code of this radio functionality can be made available to interested parties on request. (C) 2011 Elsevier B.V. All rights reserved.

Estudo da hidrogenação catalítica de NBR

Neste trabalho temos o Estudo da Hidrogenação Catalítica de NBR em meio Homogêneo, empregando complexos dos metais de transição. Nos experimentos de hidrogenação foram testados os complexos de paládio e rutênio em duas etapas diferentes. Para estes complexos, foram estudados os efeitos de temperatura, pressão, tempo e concentração de catalisador. Ainda, investigou-se os efeitos do teor de sólido de NBR em solução. Os solventes utilizados foram acetona e metiletilcetona. A Hidrogenação do Butadieno-Acrilonitrila (NBR) foi realizado em escala laboratorial num reator Parr de 1 L. No sistema utilizando o complexo de Paládio, as duplas ligações foram totalmente convertidas nas condições de 60 °C, 27 atm, 2 g de NBR, 58 mg de catalisador e 1 h de reação. Nas reações com o complexo de Rutênio, a conversão total ocorreu nas condições de 140 °C, 40 atm, 10 g de NBR, 60 mg de catalisador e 8 h de reação. As Hidrogenações de NBR mostraram-se efetiva para ambos os catalisadores atingindo a máxima conversão (100% em mol) nos dois sistemas. No entanto, o sistema utilizando catalisador de rutênio mostrou-se mais efetivo e viável para a produção de HNBR em escala industrial.

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Efeito Peltier em estruturas semicondutoras quasiperiódicas

There is nowadays a growing demand for located cooling and stabilization in optical and electronic devices, haul of portable systems of cooling that they allow a larger independence in several activities. The modules of thermoelectrical cooling are bombs of heat that use efect Peltier, that consists of the production of a temperature gradient when an electric current is applied to a thermoelectrical pair formed by two diferent drivers. That efect is part of a class of thermoelectrical efcts that it is typical of junctions among electric drivers. The modules are manufactured with semiconductors. The used is the bismuth telluride Bi2Te3, arranged in a periodic sequence. In this sense the idea appeared of doing an analysis of a system that obeys the sequence of Fibonacci. The sequence of Fibonacci has connections with the golden proportion, could be found in the reproductive study of the bees, in the behavior of the light and of the atoms, as well as in the growth of plants and in the study of galaxies, among many other applications. An apparatus unidimensional was set up with the objective of investigating the thermal behavior of a module that obeys it a rule of growth of the type Fibonacci. The results demonstrate that the modules that possess periodic arrangement are more eficient

COMPARATIVE EVALUATION of OCULOMETRIC VARIABLES IN GRAVES' OPHTHALMOPATHY

OBJECTIVES: To estimate oculometric parameters of Graves' ophthalmopathy in comparison to healthy eyes using digital photography and digital image analysis.INTRODUCTION: Graves' ophthalmopathy is the main cause of eye proptosis. Because these protrusions cause clinically perceived distortions in orbital architecture, digital photographs can be used to detect and quantify these changes.METHODS: We carried out a cross-sectional study comprising 12 healthy volunteers and 15 Graves' ophthalmopathy patients with the purpose of evaluating the use of simple, non-invasive digital photography to estimate oculometric parameters of Graves' ophthalmopathy and compare them with the parameters of unaffected eyes. Facial photographs of cases and controls were taken in a standardized manner. Oculometric parameters were compared between the groups and then correlated to proptometer measures.RESULTS: All estimated oculometric variables showed significant differences between the groups, in particular with regard to mediopupilar aperture, lateral height, distance from the iris edge to the lateral boundary of the palpebral fissure, and distance from the higher point of the iris to the lateral limit of the palpebral fissure. The product of medial aperture and horizontal palpebral fissure also revealed greater discrepancy between the groups. Proptometer measures showed significant linear correlation between the distance from the iris edge to the lateral boundary of the palpebral fissure and between the distance from the higher point of the iris to the lateral limit of palpebral fissure (p<0.05).CONCLUSIONS: Comparative analysis of oculometric parameters in Graves' ophthalmopathy suggests that eye proptosis is related to an asymmetric increase in lateral oculometric measures. Standardized digital photographs can be used in clinical practice to objectively estimate oculometric parameters of Graves' ophthalmopathy patients.

Comparative procedures for the sample decomposition of rocks used in organic agriculture and the determination of Cu, Fe, Mn, and Zn by FAAS

The aim of this work was to develop an appropriate sample preparation procedure for the flame atomic absorption spectrometry determination of Cu, Fe, Mn, and, Zn in rocks used in organic agriculture as a source of macro- and micronutrients.Six different procedures were evaluated and are classified into three groups: (a) pressure digestion system with Teflon bombs, (b) conventional wet digestion in a digester heating block, and (c) closed microwave system with pressure and temperature control.Two standard reference materials and two commercial samples were analyzed. It was found that the closed microwave system required low reagent consumption, less time, and resulted in low contamination.

Avaliação da silagem de milho das variedades granífera e forrageira no desempenho de bovinos das raças nelore e cachim em regime de confinamento

The experiment was carried out to evaluate corn grain and corn forage varieties productivity and nutritive value for silage comparing to the performance of Nellore and Canchim cattle in a feedlot. A completely randomized design was used with a 2 x 2 factorial arrangement based on two breeds (Nellore and Canchim) and two corn varieties (grain and forage). Harvest was made after 120 days sowing, when plants showed more than 2/3 of dry. leaves and grains were in dough stage. The silage was stored in a 400 tons. The experimental diet consisted of grain and forage corn silage, 7,2 liters of liquid yeast (1,5 kg of dry yeast/ head/day) and 1,1 kg of ground corn (1,0 kg of dry matter/head/day). The experiment duration was 110 days, with a 20 days adaptation period and 90 days for data collection. Animals were regularly weighted every 28 days. It was concluded that corn grain was more appropriate for silage than corn forage, and in the same stage it showed a higher dry matter content and a 41.3% higher grain yield, promoting higher weight gain and better feed/gain ratio in the feedlot beef cattle.